From 2b0f834ca3c93e3d76ae335586b41ed921c5a293 Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Fri, 2 May 2014 20:43:01 +1200 Subject: [PATCH] m68k/atari - atari_scsi: change abort/reset return codes [Resend of earlier patch - added equivalent changes to sun3 NCR5380 code] The abort/reset lowlevel return codes had changed with the new error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this. Change reset handling for Atari to clear queues only, do not attempt to call done() on each command aborted by the reset. The EH code should do that for us. Queues _must_ be cleared, otherwise atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking further error recovery. Update the Sun3 NCR5380 driver as well - the Sun3 driver was derived from the Atari one. Kudos to Finn Thain for the Sun3 part and cleaning up the header files. After the header cleanup, the initio.h include (!) can be dropped from sun3_scsi.h now. Signed-off-by: Michael Schmitz Signed-off-by: Finn Thain Acked-by: Sam Creasey Cc: Geert Uytterhoeven Cc: James E.J. Bottomley Cc: linux-scsi@vger.kernel.org Signed-off-by: Christoph Hellwig --- drivers/scsi/atari_NCR5380.c | 31 +++++++++++++++++++------------ drivers/scsi/atari_scsi.c | 2 +- drivers/scsi/atari_scsi.h | 26 -------------------------- drivers/scsi/sun3_NCR5380.c | 33 ++++++++++++++++++++------------- drivers/scsi/sun3_scsi.c | 3 ++- 5 files changed, 42 insertions(+), 53 deletions(-) diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 0f3cdbc80ba6..e4aaf9a51de3 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -2683,11 +2683,11 @@ int NCR5380_abort(Scsi_Cmnd *cmd) local_irq_restore(flags); cmd->scsi_done(cmd); falcon_release_lock_if_possible(hostdata); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } else { /* local_irq_restore(flags); */ printk("scsi%d: abort of connected command failed!\n", HOSTNO); - return SCSI_ABORT_ERROR; + return FAILED; } } #endif @@ -2711,7 +2711,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) * yet... */ tmp->scsi_done(tmp); falcon_release_lock_if_possible(hostdata); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } } @@ -2729,7 +2729,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) if (hostdata->connected) { local_irq_restore(flags); ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO); - return SCSI_ABORT_SNOOZE; + return FAILED; } /* @@ -2764,7 +2764,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO); if (NCR5380_select(instance, cmd, (int)cmd->tag)) - return SCSI_ABORT_BUSY; + return FAILED; ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO); @@ -2791,7 +2791,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) local_irq_restore(flags); tmp->scsi_done(tmp); falcon_release_lock_if_possible(hostdata); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } } } @@ -2816,7 +2816,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) */ falcon_release_lock_if_possible(hostdata); - return SCSI_ABORT_NOT_RUNNING; + return FAILED; } @@ -2825,7 +2825,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) * * Purpose : reset the SCSI bus. * - * Returns : SCSI_RESET_WAKEUP + * Returns : SUCCESS or FAILURE * */ @@ -2834,7 +2834,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) SETUP_HOSTDATA(cmd->device->host); int i; unsigned long flags; -#if 1 +#if defined(RESET_RUN_DONE) Scsi_Cmnd *connected, *disconnected_queue; #endif @@ -2859,7 +2859,14 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) * through anymore ... */ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); -#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */ + /* MSch 20140115 - looking at the generic NCR5380 driver, all of this + * should go. + * Catch-22: if we don't clear all queues, the SCSI driver lock will + * not be reset by atari_scsi_reset()! + */ + +#if defined(RESET_RUN_DONE) + /* XXX Should now be done by midlevel code, but it's broken XXX */ /* XXX see below XXX */ /* MSch: old-style reset: actually abort all command processing here */ @@ -2915,7 +2922,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) * the midlevel code that the reset was SUCCESSFUL, and there is no * need to 'wake up' the commands by a request_sense */ - return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET; + return SUCCESS; #else /* 1 */ /* MSch: new-style reset handling: let the mid-level do what it can */ @@ -2963,6 +2970,6 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) local_irq_restore(flags); /* we did no complete reset of all commands, so a wakeup is required */ - return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET; + return SUCCESS; #endif /* 1 */ } diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index 296c936cc03c..4ae0c1a29598 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -827,7 +827,7 @@ static int atari_scsi_bus_reset(Scsi_Cmnd *cmd) } else { atari_turnon_irq(IRQ_MFP_FSCSI); } - if ((rv & SCSI_RESET_ACTION) == SCSI_RESET_SUCCESS) + if (rv == SUCCESS) falcon_release_lock_if_possible(hostdata); return rv; diff --git a/drivers/scsi/atari_scsi.h b/drivers/scsi/atari_scsi.h index 11c624bb122d..ae559f4ea0b4 100644 --- a/drivers/scsi/atari_scsi.h +++ b/drivers/scsi/atari_scsi.h @@ -54,32 +54,6 @@ #define NCR5380_dma_xfer_len(i,cmd,phase) \ atari_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1) -/* former generic SCSI error handling stuff */ - -#define SCSI_ABORT_SNOOZE 0 -#define SCSI_ABORT_SUCCESS 1 -#define SCSI_ABORT_PENDING 2 -#define SCSI_ABORT_BUSY 3 -#define SCSI_ABORT_NOT_RUNNING 4 -#define SCSI_ABORT_ERROR 5 - -#define SCSI_RESET_SNOOZE 0 -#define SCSI_RESET_PUNT 1 -#define SCSI_RESET_SUCCESS 2 -#define SCSI_RESET_PENDING 3 -#define SCSI_RESET_WAKEUP 4 -#define SCSI_RESET_NOT_RUNNING 5 -#define SCSI_RESET_ERROR 6 - -#define SCSI_RESET_SYNCHRONOUS 0x01 -#define SCSI_RESET_ASYNCHRONOUS 0x02 -#define SCSI_RESET_SUGGEST_BUS_RESET 0x04 -#define SCSI_RESET_SUGGEST_HOST_RESET 0x08 - -#define SCSI_RESET_BUS_RESET 0x100 -#define SCSI_RESET_HOST_RESET 0x200 -#define SCSI_RESET_ACTION 0xff - /* Debugging printk definitions: * * ARB -> arbitration diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 636bbe0ea84c..72550bd38efd 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -2664,11 +2664,11 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) #endif local_irq_restore(flags); cmd->scsi_done(cmd); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } else { /* local_irq_restore(flags); */ printk("scsi%d: abort of connected command failed!\n", HOSTNO); - return SCSI_ABORT_ERROR; + return FAILED; } } #endif @@ -2691,7 +2691,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) /* Tagged queuing note: no tag to free here, hasn't been assigned * yet... */ tmp->scsi_done(tmp); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } /* @@ -2708,7 +2708,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) if (hostdata->connected) { local_irq_restore(flags); ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO); - return SCSI_ABORT_SNOOZE; + return FAILED; } /* @@ -2743,7 +2743,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO); if (NCR5380_select (instance, cmd, (int) cmd->tag)) - return SCSI_ABORT_BUSY; + return FAILED; ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO); @@ -2769,7 +2769,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) #endif local_irq_restore(flags); tmp->scsi_done(tmp); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } } @@ -2786,7 +2786,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) local_irq_restore(flags); printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); - return SCSI_ABORT_NOT_RUNNING; + return FAILED; } @@ -2795,7 +2795,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) * * Purpose : reset the SCSI bus. * - * Returns : SCSI_RESET_WAKEUP + * Returns : SUCCESS or FAILURE * */ @@ -2804,7 +2804,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) SETUP_HOSTDATA(cmd->device->host); int i; unsigned long flags; -#if 1 +#if defined(RESET_RUN_DONE) struct scsi_cmnd *connected, *disconnected_queue; #endif @@ -2826,8 +2826,15 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) * through anymore ... */ (void)NCR5380_read( RESET_PARITY_INTERRUPT_REG ); -#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */ - /* XXX see below XXX */ + /* MSch 20140115 - looking at the generic NCR5380 driver, all of this + * should go. + * Catch-22: if we don't clear all queues, the SCSI driver lock will + * not be released by atari_scsi_reset()! + */ + +#if defined(RESET_RUN_DONE) + /* XXX Should now be done by midlevel code, but it's broken XXX */ + /* XXX see below XXX */ /* MSch: old-style reset: actually abort all command processing here */ @@ -2876,7 +2883,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) * the midlevel code that the reset was SUCCESSFUL, and there is no * need to 'wake up' the commands by a request_sense */ - return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET; + return SUCCESS; #else /* 1 */ /* MSch: new-style reset handling: let the mid-level do what it can */ @@ -2924,7 +2931,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd) local_irq_restore(flags); /* we did no complete reset of all commands, so a wakeup is required */ - return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET; + return SUCCESS; #endif /* 1 */ } diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index e2c009b033ce..243c228a6d8c 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -79,7 +79,6 @@ #define REAL_DMA #include "scsi.h" -#include "initio.h" #include #include "sun3_scsi.h" @@ -123,6 +122,8 @@ module_param(setup_hostid, int, 0); static struct scsi_cmnd *sun3_dma_setup_done = NULL; +#define RESET_RUN_DONE + #define AFTER_RESET_DELAY (HZ/2) /* ms to wait after hitting dma regs */ -- 2.39.5