From 2b9ade935cd2be6db26f5445656950bc3da7055d Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 26 Aug 2008 04:27:10 -0700 Subject: [PATCH] ixgbe: disable flow control by default Since the adapter cannot tell what the remote end's flow control capability is through auto-neg, we must turn off flow control by default. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe.h | 6 +++--- drivers/net/ixgbe/ixgbe_common.c | 17 +++++++++++++++++ drivers/net/ixgbe/ixgbe_main.c | 15 ++++++--------- 3 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 956914a5028d..496a91aea63c 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -69,12 +69,12 @@ /* flow control */ #define IXGBE_DEFAULT_FCRTL 0x10000 -#define IXGBE_MIN_FCRTL 0 +#define IXGBE_MIN_FCRTL 0x40 #define IXGBE_MAX_FCRTL 0x7FF80 #define IXGBE_DEFAULT_FCRTH 0x20000 -#define IXGBE_MIN_FCRTH 0 +#define IXGBE_MIN_FCRTH 0x600 #define IXGBE_MAX_FCRTH 0x7FFF0 -#define IXGBE_DEFAULT_FCPAUSE 0x6800 /* may be too long */ +#define IXGBE_DEFAULT_FCPAUSE 0xFFFF #define IXGBE_MIN_FCPAUSE 0 #define IXGBE_MAX_FCPAUSE 0xFFFF diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index a9f4d0e58e1c..9c0d0a1964eb 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1064,6 +1064,13 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); + /* + * 10 gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.type == ixgbe_fc_default) + hw->fc.type = ixgbe_fc_full; + /* * We want to save off the original Flow Control configuration just in * case we get disconnected and then reconnected into a different hub @@ -1116,6 +1123,16 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg); IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); + /* + * Check for invalid software configuration, zeros are completely + * invalid for all parameters used past this point, and if we enable + * flow control with zero water marks, we blast flow control packets. + */ + if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) { + hw_dbg(hw, "Flow control structure initialized incorrectly\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + /* * We need to set up the Receive Threshold high and low water * marks as well as (optionally) enabling the transmission of diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index b5a9b9da2fb7..cba7a38bf6bb 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2446,8 +2446,12 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->tx_eitr = 1; /* default flow control settings */ - hw->fc.original_type = ixgbe_fc_full; - hw->fc.type = ixgbe_fc_full; + hw->fc.original_type = ixgbe_fc_none; + hw->fc.type = ixgbe_fc_none; + hw->fc.high_water = IXGBE_DEFAULT_FCRTH; + hw->fc.low_water = IXGBE_DEFAULT_FCRTL; + hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; + hw->fc.send_xon = true; /* select 10G link by default */ hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; @@ -3587,13 +3591,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, ixgbe_reset_task); - /* initialize default flow control settings */ - hw->fc.original_type = ixgbe_fc_full; - hw->fc.type = ixgbe_fc_full; - hw->fc.high_water = IXGBE_DEFAULT_FCRTH; - hw->fc.low_water = IXGBE_DEFAULT_FCRTL; - hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; - err = ixgbe_init_interrupt_scheme(adapter); if (err) goto err_sw_init; -- 2.39.2