From 2c794075d420f22ba4280f46ac7d43be0acb3e95 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 29 Jan 2015 18:22:04 -0200 Subject: [PATCH] [media] gspca/touptek: Fix a few CodingStyle issues Checkpatch complained about a few issues, like FSF address. Also, multi-line comments are not following the Kernel CodingStyle. While not too late, let's fix those issues. Cc: John McMaster Cc: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/gspca/touptek.c | 221 +++++++++++++++--------------- 1 file changed, 110 insertions(+), 111 deletions(-) diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c index 8b7c01e4b772..7bac6bc96063 100644 --- a/drivers/media/usb/gspca/touptek.c +++ b/drivers/media/usb/gspca/touptek.c @@ -17,10 +17,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "gspca.h" @@ -32,80 +28,80 @@ MODULE_DESCRIPTION("ToupTek UCMOS / Amscope MU microscope camera driver"); MODULE_LICENSE("GPL"); /* -Exposure reg is linear with exposure time -Exposure (sec), E (reg) -0.000400, 0x0002 -0.001000, 0x0005 -0.005000, 0x0019 -0.020000, 0x0064 -0.080000, 0x0190 -0.400000, 0x07D0 -1.000000, 0x1388 -2.000000, 0x2710 - -Three gain stages -0x1000: master channel enable bit -0x007F: low gain bits -0x0080: medium gain bit -0x0100: high gain bit -gain = enable * (1 + regH) * (1 + regM) * z * regL - -Gain implementation -Want to do something similar to mt9v011.c's set_balance - -Gain does not vary with resolution (checked 640x480 vs 1600x1200) - -Constant derivation: - -Raw data: -Gain, GTOP, B, R, GBOT -1.00, 0x105C, 0x1068, 0x10C8, 0x105C -1.20, 0x106E, 0x107E, 0x10D6, 0x106E -1.40, 0x10C0, 0x10CA, 0x10E5, 0x10C0 -1.60, 0x10C9, 0x10D4, 0x10F3, 0x10C9 -1.80, 0x10D2, 0x10DE, 0x11C1, 0x10D2 -2.00, 0x10DC, 0x10E9, 0x11C8, 0x10DC -2.20, 0x10E5, 0x10F3, 0x11CF, 0x10E5 -2.40, 0x10EE, 0x10FE, 0x11D7, 0x10EE -2.60, 0x10F7, 0x11C4, 0x11DE, 0x10F7 -2.80, 0x11C0, 0x11CA, 0x11E5, 0x11C0 -3.00, 0x11C5, 0x11CF, 0x11ED, 0x11C5 - -zR = 0.0069605943152454778 - about 3/431 = 0.0069605568445475635 -zB = 0.0095695970695970703 - about 6/627 = 0.0095693779904306216 -zG = 0.010889328063241107 - about 6/551 = 0.010889292196007259 -about 10 bits for constant + 7 bits for value => at least 17 bit intermediate -with 32 bit ints should be fine for overflow etc -Essentially gains are in range 0-0x001FF - -However, V4L expects a main gain channel + R and B balance -To keep things simple for now saturate the values of balance is too high/low -This isn't really ideal but easy way to fit the Linux model - -Converted using gain model turns out to be quite linear: -Gain, GTOP, B, R, GBOT -1.00, 92, 104, 144, 92 -1.20, 110, 126, 172, 110 -1.40, 128, 148, 202, 128 -1.60, 146, 168, 230, 146 -1.80, 164, 188, 260, 164 -2.00, 184, 210, 288, 184 -2.20, 202, 230, 316, 202 -2.40, 220, 252, 348, 220 -2.60, 238, 272, 376, 238 -2.80, 256, 296, 404, 256 -3.00, 276, 316, 436, 276 - -Maximum gain is 0x7FF * 2 * 2 => 0x1FFC (8188) -or about 13 effective bits of gain -The highest the commercial driver goes in my setup 436 -However, because could *maybe* damage circuits -limit the gain until have a reason to go higher -Solution: gain clipped and warning emitted -*/ + * Exposure reg is linear with exposure time + * Exposure (sec), E (reg) + * 0.000400, 0x0002 + * 0.001000, 0x0005 + * 0.005000, 0x0019 + * 0.020000, 0x0064 + * 0.080000, 0x0190 + * 0.400000, 0x07D0 + * 1.000000, 0x1388 + * 2.000000, 0x2710 + * + * Three gain stages + * 0x1000: master channel enable bit + * 0x007F: low gain bits + * 0x0080: medium gain bit + * 0x0100: high gain bit + * gain = enable * (1 + regH) * (1 + regM) * z * regL + * + * Gain implementation + * Want to do something similar to mt9v011.c's set_balance + * + * Gain does not vary with resolution (checked 640x480 vs 1600x1200) + * + * Constant derivation: + * + * Raw data: + * Gain, GTOP, B, R, GBOT + * 1.00, 0x105C, 0x1068, 0x10C8, 0x105C + * 1.20, 0x106E, 0x107E, 0x10D6, 0x106E + * 1.40, 0x10C0, 0x10CA, 0x10E5, 0x10C0 + * 1.60, 0x10C9, 0x10D4, 0x10F3, 0x10C9 + * 1.80, 0x10D2, 0x10DE, 0x11C1, 0x10D2 + * 2.00, 0x10DC, 0x10E9, 0x11C8, 0x10DC + * 2.20, 0x10E5, 0x10F3, 0x11CF, 0x10E5 + * 2.40, 0x10EE, 0x10FE, 0x11D7, 0x10EE + * 2.60, 0x10F7, 0x11C4, 0x11DE, 0x10F7 + * 2.80, 0x11C0, 0x11CA, 0x11E5, 0x11C0 + * 3.00, 0x11C5, 0x11CF, 0x11ED, 0x11C5 + * + * zR = 0.0069605943152454778 + * about 3/431 = 0.0069605568445475635 + * zB = 0.0095695970695970703 + * about 6/627 = 0.0095693779904306216 + * zG = 0.010889328063241107 + * about 6/551 = 0.010889292196007259 + * about 10 bits for constant + 7 bits for value => at least 17 bit + * intermediate with 32 bit ints should be fine for overflow etc + * Essentially gains are in range 0-0x001FF + * + * However, V4L expects a main gain channel + R and B balance + * To keep things simple for now saturate the values of balance is too high/low + * This isn't really ideal but easy way to fit the Linux model + * + * Converted using gain model turns out to be quite linear: + * Gain, GTOP, B, R, GBOT + * 1.00, 92, 104, 144, 92 + * 1.20, 110, 126, 172, 110 + * 1.40, 128, 148, 202, 128 + * 1.60, 146, 168, 230, 146 + * 1.80, 164, 188, 260, 164 + * 2.00, 184, 210, 288, 184 + * 2.20, 202, 230, 316, 202 + * 2.40, 220, 252, 348, 220 + * 2.60, 238, 272, 376, 238 + * 2.80, 256, 296, 404, 256 + * 3.00, 276, 316, 436, 276 + * + * Maximum gain is 0x7FF * 2 * 2 => 0x1FFC (8188) + * or about 13 effective bits of gain + * The highest the commercial driver goes in my setup 436 + * However, because could *maybe* damage circuits + * limit the gain until have a reason to go higher + * Solution: gain clipped and warning emitted + */ #define GAIN_MAX 511 /* Frame sync is a short read */ @@ -189,9 +185,9 @@ static const struct v4l2_pix_format vga_mode[] = { }; /* -As theres no known frame sync, the only way to keep synced is to try hard -to never miss any packets -*/ + * As theres no known frame sync, the only way to keep synced is to try hard + * to never miss any packets + */ #if MAX_NURBS < 4 #error "Not enough URBs in the gspca table" #endif @@ -218,7 +214,8 @@ static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) char buff[1]; int rc; - PDEBUG(D_USBO, "reg_w bReq=0x0B, bReqT=0xC0, wVal=0x%04X, wInd=0x%04X\n", + PDEBUG(D_USBO, + "reg_w bReq=0x0B, bReqT=0xC0, wVal=0x%04X, wInd=0x%04X\n", value, index); rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), 0x0B, 0xC0, value, index, buff, 1, 500); @@ -271,11 +268,11 @@ static void setexposure(struct gspca_dev *gspca_dev, s32 val) static int gainify(int in) { /* - TODO: check if there are any issues with corner cases - 0x000 (0):0x07F (127): regL - 0x080 (128) - 0x0FF (255): regM, regL - 0x100 (256) - max: regH, regM, regL - */ + * TODO: check if there are any issues with corner cases + * 0x000 (0):0x07F (127): regL + * 0x080 (128) - 0x0FF (255): regM, regL + * 0x100 (256) - max: regH, regM, regL + */ if (in <= 0x7F) return 0x1000 | in; else if (in <= 0xFF) @@ -446,18 +443,18 @@ static int configure(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "configure()\n"); /* - First driver sets a sort of encryption key - A number of futur requests of this type have wValue and wIndex encrypted - as follows: - -Compute key = this wValue rotate left by 4 bits - (decrypt.py rotates right because we are decrypting) - -Later packets encrypt packets by XOR'ing with key - XOR encrypt/decrypt is symmetrical - wValue, and wIndex are encrypted - bRequest is not and bRequestType is always 0xC0 - This allows resyncing if key is unknown? - By setting 0 we XOR with 0 and the shifting and XOR drops out - */ + * First driver sets a sort of encryption key + * A number of futur requests of this type have wValue and wIndex + * encrypted as follows: + * -Compute key = this wValue rotate left by 4 bits + * (decrypt.py rotates right because we are decrypting) + * -Later packets encrypt packets by XOR'ing with key + * XOR encrypt/decrypt is symmetrical + * wValue, and wIndex are encrypted + * bRequest is not and bRequestType is always 0xC0 + * This allows resyncing if key is unknown? + * By setting 0 we XOR with 0 and the shifting and XOR drops out + */ rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), 0x16, 0xC0, 0x0000, 0x0000, buff, 2, 500); if (val_reply(gspca_dev, buff, rc)) { @@ -466,13 +463,14 @@ static int configure(struct gspca_dev *gspca_dev) } /* - Next does some sort of 2 packet challenge / response - evidence suggests its an Atmel I2C crypto part but nobody cares to look - (to make sure its not cloned hardware?) - Ignore: I want to work with their hardware, not clone it - 16 bytes out challenge, requestType: 0x40 - 16 bytes in response, requestType: 0xC0 - */ + * Next does some sort of 2 packet challenge / response + * evidence suggests its an Atmel I2C crypto part but nobody cares to + * look + * (to make sure its not cloned hardware?) + * Ignore: I want to work with their hardware, not clone it + * 16 bytes out challenge, requestType: 0x40 + * 16 bytes in response, requestType: 0xC0 + */ rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500); @@ -496,11 +494,12 @@ static int configure(struct gspca_dev *gspca_dev) } /* - Serial number? Doesn't seem to be required - cam1: \xE6\x0D\x00\x00, cam2: \x70\x19\x00\x00 - rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), - 0x20, 0xC0, 0x0000, 0x0000, buff, 4, 500); - */ + * Serial number? Doesn't seem to be required + * cam1: \xE6\x0D\x00\x00, cam2: \x70\x19\x00\x00 + * rc = usb_control_msg(gspca_dev->dev, + * usb_rcvctrlpipe(gspca_dev->dev, 0), + * 0x20, 0xC0, 0x0000, 0x0000, buff, 4, 500); + */ /* Large (EEPROM?) read, skip it since no idea what to do with it */ gspca_dev->usb_err = 0; -- 2.39.5