From 3dc266896d75039aa9726bf2627b7b08cfd324bf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sat, 2 Jul 2016 11:00:18 +0200 Subject: [PATCH] mlxsw: reg: Add Router Interface Table Register Add the Router Interface Table Register (RITR), which allows us to create and configure router interfaces (RIFs). Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 194 ++++++++++++++++++++++ 1 file changed, 194 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index ea05e832d776..5ddc1d3c7e25 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -3262,6 +3262,198 @@ static inline void mlxsw_reg_rgcr_pack(char *payload, bool ipv4_en) mlxsw_reg_rgcr_ipv4_en_set(payload, ipv4_en); } +/* RITR - Router Interface Table Register + * -------------------------------------- + * The register is used to configure the router interface table. + */ +#define MLXSW_REG_RITR_ID 0x8002 +#define MLXSW_REG_RITR_LEN 0x40 + +static const struct mlxsw_reg_info mlxsw_reg_ritr = { + .id = MLXSW_REG_RITR_ID, + .len = MLXSW_REG_RITR_LEN, +}; + +/* reg_ritr_enable + * Enables routing on the router interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, enable, 0x00, 31, 1); + +/* reg_ritr_ipv4 + * IPv4 routing enable. Enables routing of IPv4 traffic on the router + * interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv4, 0x00, 29, 1); + +/* reg_ritr_ipv6 + * IPv6 routing enable. Enables routing of IPv6 traffic on the router + * interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv6, 0x00, 28, 1); + +enum mlxsw_reg_ritr_if_type { + MLXSW_REG_RITR_VLAN_IF, + MLXSW_REG_RITR_FID_IF, + MLXSW_REG_RITR_SP_IF, +}; + +/* reg_ritr_type + * Router interface type. + * 0 - VLAN interface. + * 1 - FID interface. + * 2 - Sub-port interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, type, 0x00, 23, 3); + +enum { + MLXSW_REG_RITR_RIF_CREATE, + MLXSW_REG_RITR_RIF_DEL, +}; + +/* reg_ritr_op + * Opcode: + * 0 - Create or edit RIF. + * 1 - Delete RIF. + * Reserved for SwitchX-2. For Spectrum, editing of interface properties + * is not supported. An interface must be deleted and re-created in order + * to update properties. + * Access: WO + */ +MLXSW_ITEM32(reg, ritr, op, 0x00, 20, 2); + +/* reg_ritr_rif + * Router interface index. A pointer to the Router Interface Table. + * Access: Index + */ +MLXSW_ITEM32(reg, ritr, rif, 0x00, 0, 16); + +/* reg_ritr_ipv4_fe + * IPv4 Forwarding Enable. + * Enables routing of IPv4 traffic on the router interface. When disabled, + * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. + * Not supported in SwitchX-2. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv4_fe, 0x04, 29, 1); + +/* reg_ritr_ipv6_fe + * IPv6 Forwarding Enable. + * Enables routing of IPv6 traffic on the router interface. When disabled, + * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. + * Not supported in SwitchX-2. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv6_fe, 0x04, 28, 1); + +/* reg_ritr_virtual_router + * Virtual router ID associated with the router interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, virtual_router, 0x04, 0, 16); + +/* reg_ritr_mtu + * Router interface MTU. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, mtu, 0x34, 0, 16); + +/* reg_ritr_if_swid + * Switch partition ID. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, if_swid, 0x08, 24, 8); + +/* reg_ritr_if_mac + * Router interface MAC address. + * In Spectrum, all MAC addresses must have the same 38 MSBits. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, ritr, if_mac, 0x12, 6); + +/* VLAN Interface */ + +/* reg_ritr_vlan_if_vid + * VLAN ID. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, vlan_if_vid, 0x08, 0, 12); + +/* FID Interface */ + +/* reg_ritr_fid_if_fid + * Filtering ID. Used to connect a bridge to the router. Only FIDs from + * the vFID range are supported. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, fid_if_fid, 0x08, 0, 16); + +static inline void mlxsw_reg_ritr_fid_set(char *payload, + enum mlxsw_reg_ritr_if_type rif_type, + u16 fid) +{ + if (rif_type == MLXSW_REG_RITR_FID_IF) + mlxsw_reg_ritr_fid_if_fid_set(payload, fid); + else + mlxsw_reg_ritr_vlan_if_vid_set(payload, fid); +} + +/* Sub-port Interface */ + +/* reg_ritr_sp_if_lag + * LAG indication. When this bit is set the system_port field holds the + * LAG identifier. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, sp_if_lag, 0x08, 24, 1); + +/* reg_ritr_sp_system_port + * Port unique indentifier. When lag bit is set, this field holds the + * lag_id in bits 0:9. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, sp_if_system_port, 0x08, 0, 16); + +/* reg_ritr_sp_if_vid + * VLAN ID. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, sp_if_vid, 0x18, 0, 12); + +static inline void mlxsw_reg_ritr_rif_pack(char *payload, u16 rif) +{ + MLXSW_REG_ZERO(ritr, payload); + mlxsw_reg_ritr_rif_set(payload, rif); +} + +static inline void mlxsw_reg_ritr_sp_if_pack(char *payload, bool lag, + u16 system_port, u16 vid) +{ + mlxsw_reg_ritr_sp_if_lag_set(payload, lag); + mlxsw_reg_ritr_sp_if_system_port_set(payload, system_port); + mlxsw_reg_ritr_sp_if_vid_set(payload, vid); +} + +static inline void mlxsw_reg_ritr_pack(char *payload, bool enable, + enum mlxsw_reg_ritr_if_type type, + u16 rif, u16 mtu, const char *mac) +{ + bool op = enable ? MLXSW_REG_RITR_RIF_CREATE : MLXSW_REG_RITR_RIF_DEL; + + MLXSW_REG_ZERO(ritr, payload); + mlxsw_reg_ritr_enable_set(payload, enable); + mlxsw_reg_ritr_ipv4_set(payload, 1); + mlxsw_reg_ritr_type_set(payload, type); + mlxsw_reg_ritr_op_set(payload, op); + mlxsw_reg_ritr_rif_set(payload, rif); + mlxsw_reg_ritr_ipv4_fe_set(payload, 1); + mlxsw_reg_ritr_mtu_set(payload, mtu); + mlxsw_reg_ritr_if_mac_memcpy_to(payload, mac); +} + /* MFCR - Management Fan Control Register * -------------------------------------- * This register controls the settings of the Fan Speed PWM mechanism. @@ -4002,6 +4194,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "HPKT"; case MLXSW_REG_RGCR_ID: return "RGCR"; + case MLXSW_REG_RITR_ID: + return "RITR"; case MLXSW_REG_MFCR_ID: return "MFCR"; case MLXSW_REG_MFSC_ID: -- 2.39.5