From 583c871467a4ecad2b09030a3a68156065f9b934 Mon Sep 17 00:00:00 2001 From: Stefan Ringel Date: Mon, 15 Feb 2010 14:37:17 -0300 Subject: [PATCH] V4L/DVB: tm6000: add different tuner reset for terratec [mchehab@redhat.com: Fix CodingStyle] Signed-off-by: Stefan Ringel Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/tm6000/tm6000-cards.c | 28 +++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c index 268a7de20d6d..0db31bc17813 100644 --- a/drivers/staging/tm6000/tm6000-cards.c +++ b/drivers/staging/tm6000/tm6000-cards.c @@ -269,12 +269,28 @@ int tm6000_tuner_callback(void *ptr, int component, int command, int arg) /* Reset codes during load firmware */ switch (arg) { case 0: - tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, - dev->tuner_reset_gpio, 0x00); - msleep(130); - tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, - dev->tuner_reset_gpio, 0x01); - msleep(130); + /* newer tuner can faster reset */ + switch (dev->model) { + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x01); + msleep(60); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x00); + msleep(75); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x01); + msleep(60); + break; + default: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x00); + msleep(130); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x01); + msleep(130); + break; + } break; case 1: tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, -- 2.39.5