From 61e754f44b57060464b1fcf261a8428ecfa23bed Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 4 Aug 2008 16:38:02 +0200 Subject: [PATCH] rt2x00: Implement HW encryption (rt61pci) rt61pci supports hardware encryption. rt61pci supports up to 4 shared keys and up to 64 pairwise keys. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 1 + drivers/net/wireless/rt2x00/rt61pci.c | 256 +++++++++++++++++++++++++- drivers/net/wireless/rt2x00/rt61pci.h | 21 ++- 3 files changed, 270 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 2f60e175f039..f333f6100d09 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -107,6 +107,7 @@ config RT61PCI depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE + select RT2X00_LIB_CRYPTO select CRC_ITU_T select EEPROM_93CX6 ---help--- diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 087e90b328cd..86e7a50374b9 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -346,6 +346,204 @@ static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, /* * Configuration handlers. */ +static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for shared keys. We have 1 register + * with key valid bits. The goal is simple, read + * the register, if that is full we have no slots + * left. + * Note that each BSS is allowed to have up to 4 + * shared keys, so put a mask over the allowed + * entries. + */ + mask = (0xf << crypto->bssidx); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + key->hw_key_idx += reg ? (ffz(reg) - 1) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + reg = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + /* + * The cipher types are stored over 2 registers. + * bssidx 0 and 1 keys are stored in SEC_CSR1 and + * bssidx 1 and 2 keys are stored in SEC_CSR5. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + if (key->hw_key_idx < 8) { + field.bit_offset = (3 * key->hw_key_idx); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg); + } else { + field.bit_offset = (3 * (key->hw_key_idx - 8)); + field.bit_mask = 0x7 << field.bit_offset; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00_set_field32(®, field, crypto->cipher); + rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg); + } + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR0 contains only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR0, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg); + + return 0; +} + +static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_pairwise_ta_entry addr_entry; + struct hw_key_entry key_entry; + u32 mask; + u32 reg; + + if (crypto->cmd == SET_KEY) { + /* + * rt2x00lib can't determine the correct free + * key_idx for pairwise keys. We have 2 registers + * with key valid bits. The goal is simple, read + * the first register, if that is full move to + * the next register. + * When both registers are full, we drop the key, + * otherwise we use the first invalid entry. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (reg && reg == ~0) { + key->hw_key_idx = 32; + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (reg && reg == ~0) + return -ENOSPC; + } + + key->hw_key_idx += reg ? (ffz(reg) - 1) : 0; + + /* + * Upload key to hardware + */ + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + memset(&addr_entry, 0, sizeof(addr_entry)); + memcpy(&addr_entry, crypto->address, ETH_ALEN); + addr_entry.cipher = crypto->cipher; + + reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); + + reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); + rt2x00pci_register_multiwrite(rt2x00dev, reg, + &addr_entry, sizeof(addr_entry)); + + /* + * Enable pairwise lookup table for given BSS idx, + * without this received frames will not be decrypted + * by the hardware. + */ + rt2x00pci_register_read(rt2x00dev, SEC_CSR4, ®); + reg |= (1 << crypto->bssidx); + rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } + + /* + * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate + * a particular key is valid. Because using the FIELD32() + * defines directly will cause a lot of overhead we use + * a calculation to determine the correct bit directly. + */ + if (key->hw_key_idx < 32) { + mask = 1 << key->hw_key_idx; + + rt2x00pci_register_read(rt2x00dev, SEC_CSR2, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg); + } else { + mask = 1 << (key->hw_key_idx - 32); + + rt2x00pci_register_read(rt2x00dev, SEC_CSR3, ®); + if (crypto->cmd == SET_KEY) + reg |= mask; + else if (crypto->cmd == DISABLE_KEY) + reg &= ~mask; + rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg); + } + + return 0; +} + static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -1533,8 +1731,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, * TX descriptor initialization */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct txentry_desc *txdesc) + struct sk_buff *skb, + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1548,7 +1746,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); @@ -1561,6 +1759,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv); + _rt2x00_desc_write(txd, 4, skbdesc->eiv); + } + rt2x00_desc_read(txd, 5, &word); rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, @@ -1595,11 +1798,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); + rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, + test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, + test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); rt2x00_desc_write(txd, 0, word); } @@ -1718,6 +1925,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt61pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word1; @@ -1728,6 +1936,38 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG); + rxdesc->cipher_status = + rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR); + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv); + _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv); + _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + /* + * FIXME: Legacy driver indicates that the frame does + * contain the Michael Mic. Unfortunately, in rt2x00 + * the MIC seems to be missing completely... + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1735,7 +1975,7 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); + rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); if (rt2x00_get_field32(word0, RXD_W0_OFDM)) @@ -2355,6 +2595,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2404,6 +2645,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, @@ -2432,6 +2674,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_beacon = rt61pci_write_beacon, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, + .config_shared_key = rt61pci_config_shared_key, + .config_pairwise_key = rt61pci_config_pairwise_key, .config_filter = rt61pci_config_filter, .config_intf = rt61pci_config_intf, .config_erp = rt61pci_config_erp, diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 1004d5b899e6..6d591cef3e5d 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -134,6 +134,16 @@ #define PAIRWISE_KEY_TABLE_BASE 0x1200 #define PAIRWISE_TA_TABLE_BASE 0x1a00 +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_key_entry)) ) +#define PAIRWISE_TA_ENTRY(__idx) \ + ( PAIRWISE_TA_TABLE_BASE + \ + ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) + struct hw_key_entry { u8 key[16]; u8 tx_mic[8]; @@ -142,7 +152,8 @@ struct hw_key_entry { struct hw_pairwise_ta_entry { u8 address[6]; - u8 reserved[2]; + u8 cipher; + u8 reserved; } __attribute__ ((packed)); /* @@ -662,6 +673,10 @@ struct hw_pairwise_ta_entry { * SEC_CSR4: Pairwise key table lookup control. */ #define SEC_CSR4 0x30b0 +#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) +#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) +#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) +#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) /* * SEC_CSR5: shared key table security mode register. @@ -1428,8 +1443,10 @@ struct hw_pairwise_ta_entry { /* * Word4 + * ICV: Received ICV of originally encrypted. + * NOTE: This is a guess, the official definition is "reserved" */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) +#define RXD_W4_ICV FIELD32(0xffffffff) /* * the above 20-byte is called RXINFO and will be DMAed to MAC RX block -- 2.39.5