From 639585ac2ff722d4dca1add27c37e6258a091c70 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 17 May 2018 10:29:38 +0200 Subject: [PATCH] arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link This patch adds a fixed-link node to both 10G interfaces of the 8040-db board. This is required as the mvpp2 driver now uses phylink. The best solution would have been to describe the SFP cages but they are not wired correctly, and thus unusable, so we chose to use fixed-link instead. Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 5689fb23bbab..1bac437369a1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -177,6 +177,11 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth2 { @@ -303,6 +308,11 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp1_eth1 { -- 2.39.5