From 64b91379439ff0fb007bde90eb496299c14a9b2a Mon Sep 17 00:00:00 2001 From: Pat Gefre Date: Sat, 25 Mar 2006 03:08:07 -0800 Subject: [PATCH] [PATCH] Altix: rs422 support for ioc4 serial driver Add rs422 support to the Altix ioc4 serial driver. Signed-off-by: Patrick Gefre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/ioc4_serial.c | 387 ++++++++++++++++++++++------------- 1 file changed, 249 insertions(+), 138 deletions(-) diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index a37579ce6d76..c620209d7b9a 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. */ @@ -323,9 +323,12 @@ static unsigned int Num_of_ioc4_cards; #define IOC4_FIFO_CHARS 255 /* Device name we're using */ -#define DEVICE_NAME "ttyIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 50 +#define DEVICE_NAME_RS232 "ttyIOC" +#define DEVICE_NAME_RS422 "ttyAIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR_RS232 50 +#define DEVICE_MINOR_RS422 84 + /* register offsets */ #define IOC4_SERIAL_OFFSET 0x300 @@ -341,10 +344,8 @@ static unsigned int Num_of_ioc4_cards; #define MAX_BAUD_SUPPORTED 115200 /* protocol types supported */ -enum sio_proto { - PROTO_RS232, - PROTO_RS422 -}; +#define PROTO_RS232 3 +#define PROTO_RS422 7 /* Notification types */ #define N_DATA_READY 0x01 @@ -395,11 +396,17 @@ enum sio_proto { /* * This is the entry saved by the driver - one per card */ + +#define UART_PORT_MIN 0 +#define UART_PORT_RS232 UART_PORT_MIN +#define UART_PORT_RS422 1 +#define UART_PORT_COUNT 2 /* one for each mode */ + struct ioc4_control { int ic_irq; struct { - /* uart ports are allocated here */ - struct uart_port icp_uart_port; + /* uart ports are allocated here - 1 for rs232, 1 for rs422 */ + struct uart_port icp_uart_port[UART_PORT_COUNT]; /* Handy reference material */ struct ioc4_port *icp_port; } ic_port[IOC4_NUM_SERIAL_PORTS]; @@ -443,7 +450,9 @@ struct ioc4_soft { /* Local port info for each IOC4 serial ports */ struct ioc4_port { - struct uart_port *ip_port; + struct uart_port *ip_port; /* current active port ptr */ + /* Ptrs for all ports */ + struct uart_port *ip_all_ports[UART_PORT_COUNT]; /* Back ptrs for this port */ struct ioc4_control *ip_control; struct pci_dev *ip_pdev; @@ -502,6 +511,9 @@ struct ioc4_port { #define DCD_ON 0x02 #define LOWAT_WRITTEN 0x04 #define READ_ABORTED 0x08 +#define PORT_ACTIVE 0x10 +#define PORT_INACTIVE 0 /* This is the value when "off" */ + /* Since each port has different register offsets and bitmasks * for everything, we'll store those that we need in tables so we @@ -623,6 +635,23 @@ struct ring_buffer { static void receive_chars(struct uart_port *); static void handle_intr(void *arg, uint32_t sio_ir); +/* + * port_is_active - determines if this port is currently active + * @port: ptr to soft struct for this port + * @uart_port: uart port to test for + */ +static inline int port_is_active(struct ioc4_port *port, + struct uart_port *uart_port) +{ + if (port) { + if ((port->ip_flags & PORT_ACTIVE) + && (port->ip_port == uart_port)) + return 1; + } + return 0; +} + + /** * write_ireg - write the interrupt regs * @ioc4_soft: ptr to soft struct for this port @@ -708,19 +737,33 @@ static int set_baud(struct ioc4_port *port, int baud) /** * get_ioc4_port - given a uart port, return the control structure * @port: uart port + * @set: set this port as current */ -static struct ioc4_port *get_ioc4_port(struct uart_port *the_port) +static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set) { struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev); struct ioc4_control *control = idd->idd_serial_data; - int ii; + struct ioc4_port *port; + int port_num, port_type; if (control) { - for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) { - if (!control->ic_port[ii].icp_port) + for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; + port_num++ ) { + port = control->ic_port[port_num].icp_port; + if (!port) continue; - if (the_port == control->ic_port[ii].icp_port->ip_port) - return control->ic_port[ii].icp_port; + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + if (the_port == port->ip_all_ports + [port_type]) { + /* set local copy */ + if (set) { + port->ip_port = the_port; + } + return port; + } + } } } return NULL; @@ -946,6 +989,7 @@ intr_connect(struct ioc4_soft *soft, int type, * @arg: handler arg * @regs: registers */ + static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) { struct ioc4_soft *soft; @@ -953,7 +997,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) int xx, num_intrs = 0; int intr_type; int handled = 0; - struct ioc4_intr_info *ii; + struct ioc4_intr_info *intr_info; soft = arg; for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { @@ -966,13 +1010,13 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) * which interrupt bits are set. */ for (xx = 0; xx < num_intrs; xx++) { - ii = &soft->is_intr_type[intr_type].is_intr_info[xx]; - if ((this_mir = this_ir & ii->sd_bits)) { + intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; + if ((this_mir = this_ir & intr_info->sd_bits)) { /* Disable owned interrupts, call handler */ handled++; - write_ireg(soft, ii->sd_bits, IOC4_W_IEC, + write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, intr_type); - ii->sd_intr(ii->sd_info, this_mir); + intr_info->sd_intr(intr_info->sd_info, this_mir); this_ir &= ~this_mir; } } @@ -980,7 +1024,6 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) #ifdef DEBUG_INTERRUPTS { struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; - spinlock_t *lp = &soft->is_ir_lock; unsigned long flag; spin_lock_irqsave(&soft->is_ir_lock, flag); @@ -1177,7 +1220,7 @@ static inline int local_open(struct ioc4_port *port) { int spiniter = 0; - port->ip_flags = 0; + port->ip_flags = PORT_ACTIVE; /* Pause the DMA interface if necessary */ if (port->ip_sscr & IOC4_SSCR_DMA_EN) { @@ -1187,6 +1230,7 @@ static inline int local_open(struct ioc4_port *port) & IOC4_SSCR_PAUSE_STATE) == 0) { spiniter++; if (spiniter > MAXITER) { + port->ip_flags = PORT_INACTIVE; return -1; } } @@ -1506,14 +1550,13 @@ static int set_notification(struct ioc4_port *port, int mask, int set_on) /** * set_mcr - set the master control reg * @the_port: port to use - * @set: set ? * @mask1: mcr mask * @mask2: shadow mask */ -static inline int set_mcr(struct uart_port *the_port, int set, +static inline int set_mcr(struct uart_port *the_port, int mask1, int mask2) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); uint32_t shadow; int spiniter = 0; char mcr; @@ -1536,13 +1579,9 @@ static inline int set_mcr(struct uart_port *the_port, int set, mcr = (shadow & 0xff000000) >> 24; /* Set new value */ - if (set) { - mcr |= mask1; - shadow |= mask2; - } else { - mcr &= ~mask1; - shadow &= ~mask2; - } + mcr |= mask1; + shadow |= mask2; + writeb(mcr, &port->ip_uart_regs->i4u_mcr); writel(shadow, &port->ip_serial_regs->shadow); @@ -1558,7 +1597,7 @@ static inline int set_mcr(struct uart_port *the_port, int set, * @port: port to use * @proto: protocol to use */ -static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto) +static int ioc4_set_proto(struct ioc4_port *port, int proto) { struct hooks *hooks = port->ip_hooks; @@ -1589,7 +1628,7 @@ static void transmit_chars(struct uart_port *the_port) int result; char *start; struct tty_struct *tty; - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); struct uart_info *info; if (!the_port) @@ -1645,7 +1684,7 @@ static void ioc4_change_speed(struct uart_port *the_port, struct termios *new_termios, struct termios *old_termios) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); int baud, bits; unsigned cflag; int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; @@ -1752,7 +1791,7 @@ static inline int ic4_startup_local(struct uart_port *the_port) if (!the_port) return -1; - port = get_ioc4_port(the_port); + port = get_ioc4_port(the_port, 0); if (!port) return -1; @@ -1760,6 +1799,9 @@ static inline int ic4_startup_local(struct uart_port *the_port) local_open(port); + /* set the protocol - mapbase has the port type */ + ioc4_set_proto(port, the_port->mapbase); + /* set the speed of the serial port */ ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0); @@ -1768,17 +1810,17 @@ static inline int ic4_startup_local(struct uart_port *the_port) /* * ioc4_cb_output_lowat - called when the output low water mark is hit - * @port: port to output + * @the_port: port to output */ -static void ioc4_cb_output_lowat(struct ioc4_port *port) +static void ioc4_cb_output_lowat(struct uart_port *the_port) { unsigned long pflags; /* ip_lock is set on the call here */ - if (port->ip_port) { - spin_lock_irqsave(&port->ip_port->lock, pflags); - transmit_chars(port->ip_port); - spin_unlock_irqrestore(&port->ip_port->lock, pflags); + if (the_port) { + spin_lock_irqsave(&the_port->lock, pflags); + transmit_chars(the_port); + spin_unlock_irqrestore(&the_port->lock, pflags); } } @@ -1923,7 +1965,7 @@ static void handle_intr(void *arg, uint32_t sio_ir) &port->ip_mem->sio_ir.raw); if (port->ip_notify & N_OUTPUT_LOWAT) - ioc4_cb_output_lowat(port); + ioc4_cb_output_lowat(port->ip_port); } /* Handle tx_mt. Must come after tx_explicit. */ @@ -1936,7 +1978,7 @@ static void handle_intr(void *arg, uint32_t sio_ir) * So send the notification now. */ if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc4_cb_output_lowat(port); + ioc4_cb_output_lowat(port->ip_port); /* We need to reload the sio_ir since the lowat * call may have caused another write to occur, @@ -2023,7 +2065,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf, int len) { int prod_ptr, cons_ptr, total; - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); struct ring *inring; struct ring_entry *entry; struct hooks *hooks = port->ip_hooks; @@ -2335,17 +2377,27 @@ static void receive_chars(struct uart_port *the_port) */ static const char *ic4_type(struct uart_port *the_port) { - return "SGI IOC4 Serial"; + if (the_port->mapbase == PROTO_RS232) + return "SGI IOC4 Serial [rs232]"; + else + return "SGI IOC4 Serial [rs422]"; } /** - * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty - * @port: Port to operate on (we ignore since we always return 1) + * ic4_tx_empty - Is the transmitter empty? + * @port: Port to operate on * */ static unsigned int ic4_tx_empty(struct uart_port *the_port) { - return 1; + struct ioc4_port *port = get_ioc4_port(the_port, 0); + unsigned int ret = 0; + + if (port_is_active(port, the_port)) { + if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT) + ret = TIOCSER_TEMT; + } + return ret; } /** @@ -2355,6 +2407,10 @@ static unsigned int ic4_tx_empty(struct uart_port *the_port) */ static void ic4_stop_tx(struct uart_port *the_port) { + struct ioc4_port *port = get_ioc4_port(the_port, 0); + + if (port_is_active(port, the_port)) + set_notification(port, N_OUTPUT_LOWAT, 0); } /** @@ -2377,11 +2433,12 @@ static void ic4_shutdown(struct uart_port *the_port) struct ioc4_port *port; struct uart_info *info; - port = get_ioc4_port(the_port); + port = get_ioc4_port(the_port, 0); if (!port) return; info = the_port->info; + port->ip_port = NULL; wake_up_interruptible(&info->delta_msr_wait); @@ -2390,6 +2447,7 @@ static void ic4_shutdown(struct uart_port *the_port) spin_lock_irqsave(&the_port->lock, port_flags); set_notification(port, N_ALL, 0); + port->ip_flags = PORT_INACTIVE; spin_unlock_irqrestore(&the_port->lock, port_flags); } @@ -2402,6 +2460,11 @@ static void ic4_shutdown(struct uart_port *the_port) static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) { unsigned char mcr = 0; + struct ioc4_port *port; + + port = get_ioc4_port(the_port, 0); + if (!port_is_active(port, the_port)) + return; if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; @@ -2414,7 +2477,7 @@ static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR); + set_mcr(the_port, mcr, IOC4_SHADOW_DTR); } /** @@ -2424,11 +2487,11 @@ static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) */ static unsigned int ic4_get_mctrl(struct uart_port *the_port) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); uint32_t shadow; unsigned int ret = 0; - if (!port) + if (!port_is_active(port, the_port)) return 0; shadow = readl(&port->ip_serial_regs->shadow); @@ -2448,9 +2511,9 @@ static unsigned int ic4_get_mctrl(struct uart_port *the_port) */ static void ic4_start_tx(struct uart_port *the_port) { - struct ioc4_port *port = get_ioc4_port(the_port); + struct ioc4_port *port = get_ioc4_port(the_port, 0); - if (port) { + if (port_is_active(port, the_port)) { set_notification(port, N_OUTPUT_LOWAT, 1); enable_intrs(port, port->ip_hooks->intr_tx_mt); } @@ -2467,7 +2530,7 @@ static void ic4_break_ctl(struct uart_port *the_port, int break_state) } /** - * ic4_startup - Start up the serial port - always return 0 (We're always on) + * ic4_startup - Start up the serial port * @port: Port to operate on * */ @@ -2479,17 +2542,16 @@ static int ic4_startup(struct uart_port *the_port) struct uart_info *info; unsigned long port_flags; - if (!the_port) { + if (!the_port) return -ENODEV; - } - port = get_ioc4_port(the_port); - if (!port) { + port = get_ioc4_port(the_port, 1); + if (!port) return -ENODEV; - } info = the_port->info; control = port->ip_control; if (!control) { + port->ip_port = NULL; return -ENODEV; } @@ -2551,28 +2613,104 @@ static struct uart_ops ioc4_ops = { * Boot-time initialization code */ -static struct uart_driver ioc4_uart = { +static struct uart_driver ioc4_uart_rs232 = { .owner = THIS_MODULE, - .driver_name = "ioc4_serial", - .dev_name = DEVICE_NAME, + .driver_name = "ioc4_serial_rs232", + .dev_name = DEVICE_NAME_RS232, .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR, + .minor = DEVICE_MINOR_RS232, .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, }; +static struct uart_driver ioc4_uart_rs422 = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial_rs422", + .dev_name = DEVICE_NAME_RS422, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR_RS422, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + + /** - * ioc4_serial_core_attach - register with serial core + * ioc4_serial_remove_one - detach function + * + * @idd: IOC4 master module data for this IOC4 + */ + +static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) +{ + int port_num, port_type; + struct ioc4_control *control; + struct uart_port *the_port; + struct ioc4_port *port; + struct ioc4_soft *soft; + + control = idd->idd_serial_data; + + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type]; + if (the_port) { + switch (port_type) { + case UART_PORT_RS422: + uart_remove_one_port(&ioc4_uart_rs422, + the_port); + break; + default: + case UART_PORT_RS232: + uart_remove_one_port(&ioc4_uart_rs232, + the_port); + break; + } + } + } + port = control->ic_port[port_num].icp_port; + /* we allocate in pairs */ + if (!(port_num & 1) && port) { + pci_free_consistent(port->ip_pdev, + TOTAL_RING_BUF_SIZE, + port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + } + } + soft = control->ic_soft; + if (soft) { + free_irq(control->ic_irq, soft); + if (soft->is_ioc4_serial_addr) { + release_region((unsigned long) + soft->is_ioc4_serial_addr, + sizeof(struct ioc4_serial)); + } + kfree(soft); + } + kfree(control); + idd->idd_serial_data = NULL; + + return 0; +} + + +/** + * ioc4_serial_core_attach_rs232 - register with serial core * This is done during pci probing * @pdev: handle for this card */ static inline int -ioc4_serial_core_attach(struct pci_dev *pdev) +ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) { struct ioc4_port *port; struct uart_port *the_port; struct ioc4_driver_data *idd = pci_get_drvdata(pdev); struct ioc4_control *control = idd->idd_serial_data; - int ii; + int port_num; + int port_type_idx; + struct uart_driver *u_driver; + DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", __FUNCTION__, pdev, (void *)control)); @@ -2580,28 +2718,36 @@ ioc4_serial_core_attach(struct pci_dev *pdev) if (!control) return -ENODEV; + port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232 + : UART_PORT_RS422; + + u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232 + : &ioc4_uart_rs422; + /* once around for each port on this card */ - for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { - the_port = &control->ic_port[ii].icp_uart_port; - port = control->ic_port[ii].icp_port; - port->ip_port = the_port; + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type_idx]; + port = control->ic_port[port_num].icp_port; + port->ip_all_ports[port_type_idx] = the_port; - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n", + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", __FUNCTION__, (void *)the_port, - (void *)port)); + (void *)port, + port_type == PROTO_RS232 ? "rs232" : "rs422")); /* membase, iobase and mapbase just need to be non-0 */ the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | ii; - the_port->line = (Num_of_ioc4_cards << 2) | ii; - the_port->mapbase = 1; + the_port->iobase = (pdev->bus->number << 16) | port_num; + the_port->line = (Num_of_ioc4_cards << 2) | port_num; + the_port->mapbase = port_type; the_port->type = PORT_16550A; the_port->fifosize = IOC4_FIFO_CHARS; the_port->ops = &ioc4_ops; the_port->irq = control->ic_irq; the_port->dev = &pdev->dev; spin_lock_init(&the_port->lock); - if (uart_add_one_port(&ioc4_uart, the_port) < 0) { + if (uart_add_one_port(u_driver, the_port) < 0) { printk(KERN_WARNING "%s: unable to add port %d bus %d\n", __FUNCTION__, the_port->line, pdev->bus->number); @@ -2610,8 +2756,6 @@ ioc4_serial_core_attach(struct pci_dev *pdev) ("IOC4 serial port %d irq = %d, bus %d\n", the_port->line, the_port->irq, pdev->bus->number)); } - /* all ports are rs232 for now */ - ioc4_set_proto(port, PROTO_RS232); } return 0; } @@ -2631,7 +2775,8 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) int ret = 0; - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id)); + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, + idd->idd_pci_id)); /* request serial registers */ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; @@ -2653,11 +2798,11 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) goto out2; } DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", - __FUNCTION__, (void *)idd->idd_misc_regs, (void *)serial)); + __FUNCTION__, (void *)idd->idd_misc_regs, + (void *)serial)); /* Get memory for the new card */ - control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS, - GFP_KERNEL); + control = kmalloc(sizeof(struct ioc4_control), GFP_KERNEL); if (!control) { printk(KERN_WARNING "ioc4_attach_one" @@ -2702,7 +2847,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) /* Hook up interrupt handler */ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ, - "sgi-ioc4serial", (void *)soft)) { + "sgi-ioc4serial", soft)) { control->ic_irq = idd->idd_pdev->irq; } else { printk(KERN_WARNING @@ -2713,16 +2858,21 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) if (ret) goto out4; - /* register port with the serial core */ + /* register port with the serial core - 1 rs232, 1 rs422 */ - if ((ret = ioc4_serial_core_attach(idd->idd_pdev))) + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) goto out4; + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) + goto out5; + Num_of_ioc4_cards++; return ret; /* error exits that give back resources */ +out5: + ioc4_serial_remove_one(idd); out4: kfree(soft); out3: @@ -2735,52 +2885,6 @@ out1: } -/** - * ioc4_serial_remove_one - detach function - * - * @idd: IOC4 master module data for this IOC4 - */ - -int ioc4_serial_remove_one(struct ioc4_driver_data *idd) -{ - int ii; - struct ioc4_control *control; - struct uart_port *the_port; - struct ioc4_port *port; - struct ioc4_soft *soft; - - control = idd->idd_serial_data; - - for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { - the_port = &control->ic_port[ii].icp_uart_port; - if (the_port) { - uart_remove_one_port(&ioc4_uart, the_port); - } - port = control->ic_port[ii].icp_port; - if (!(ii & 1) && port) { - pci_free_consistent(port->ip_pdev, - TOTAL_RING_BUF_SIZE, - (void *)port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - } - } - soft = control->ic_soft; - if (soft) { - free_irq(control->ic_irq, (void *)soft); - if (soft->is_ioc4_serial_addr) { - release_region((unsigned long) - soft->is_ioc4_serial_addr, - sizeof(struct ioc4_serial)); - } - kfree(soft); - } - kfree(control); - idd->idd_serial_data = NULL; - - return 0; -} - static struct ioc4_submodule ioc4_serial_submodule = { .is_name = "IOC4_serial", .is_owner = THIS_MODULE, @@ -2796,9 +2900,15 @@ int ioc4_serial_init(void) int ret; /* register with serial core */ - if ((ret = uart_register_driver(&ioc4_uart)) < 0) { + if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register rs232 IOC4 serial driver\n", + __FUNCTION__); + return ret; + } + if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { printk(KERN_WARNING - "%s: Couldn't register IOC4 serial driver\n", + "%s: Couldn't register rs422 IOC4 serial driver\n", __FUNCTION__); return ret; } @@ -2810,7 +2920,8 @@ int ioc4_serial_init(void) static void __devexit ioc4_serial_exit(void) { ioc4_unregister_submodule(&ioc4_serial_submodule); - uart_unregister_driver(&ioc4_uart); + uart_unregister_driver(&ioc4_uart_rs232); + uart_unregister_driver(&ioc4_uart_rs422); } module_init(ioc4_serial_init); -- 2.39.5