From 6c3218c6f7e5be6d785486797d48203d54cfd893 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 14 Jun 2011 01:34:23 +0000 Subject: [PATCH] bnx2x: Adjust ETS to 578xx Signed-off-by: Yaniv Rosner Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_dcb.c | 2 +- drivers/net/bnx2x/bnx2x_link.c | 753 ++++++++++++++++++++++++++++++++- drivers/net/bnx2x/bnx2x_link.h | 40 +- drivers/net/bnx2x/bnx2x_reg.h | 172 ++++++++ 4 files changed, 963 insertions(+), 4 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c index aaed9f09c329..50a5c4f3d583 100644 --- a/drivers/net/bnx2x/bnx2x_dcb.c +++ b/drivers/net/bnx2x/bnx2x_dcb.c @@ -424,7 +424,7 @@ static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp) struct bnx2x_dcbx_pg_params *ets = &(bp->dcbx_port_params.ets); u8 status = 0; - bnx2x_ets_disabled(&bp->link_params/*, &bp->link_vars*/); + bnx2x_ets_disabled(&bp->link_params, &bp->link_vars); if (!ets->enabled) return; diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 73938f9201a9..a5c34880b39e 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -337,12 +337,12 @@ static void bnx2x_set_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 val) /******************************************************************/ /* ETS section */ /******************************************************************/ -void bnx2x_ets_disabled(struct link_params *params) +static void bnx2x_ets_e2e3a0_disabled(struct link_params *params) { /* ETS disabled configuration*/ struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "ETS disabled configuration\n"); + DP(NETIF_MSG_LINK, "ETS E2E3 disabled configuration\n"); /* * mapping between entry priority to client number (0,1,2 -debug and @@ -395,7 +395,756 @@ void bnx2x_ets_disabled(struct link_params *params) /* Defines the number of consecutive slots for the strict priority */ REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0); } +/****************************************************************************** +* Description: +* Getting min_w_val will be set according to line speed . +*. +******************************************************************************/ +static u32 bnx2x_ets_get_min_w_val_nig(const struct link_vars *vars) +{ + u32 min_w_val = 0; + /* Calculate min_w_val.*/ + if (vars->link_up) { + if (SPEED_20000 == vars->line_speed) + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; + else + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS; + } else + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; + /** + * If the link isn't up (static configuration for example ) The + * link will be according to 20GBPS. + */ + return min_w_val; +} +/****************************************************************************** +* Description: +* Getting credit upper bound form min_w_val. +*. +******************************************************************************/ +static u32 bnx2x_ets_get_credit_upper_bound(const u32 min_w_val) +{ + const u32 credit_upper_bound = (u32)MAXVAL((150 * min_w_val), + MAX_PACKET_SIZE); + return credit_upper_bound; +} +/****************************************************************************** +* Description: +* Set credit upper bound for NIG. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_set_credit_upper_bound_nig( + const struct link_params *params, + const u32 min_w_val) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 credit_upper_bound = + bnx2x_ets_get_credit_upper_bound(min_w_val); + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5, credit_upper_bound); + + if (0 == port) { + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6, + credit_upper_bound); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7, + credit_upper_bound); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8, + credit_upper_bound); + } +} +/****************************************************************************** +* Description: +* Will return the NIG ETS registers to init values.Except +* credit_upper_bound. +* That isn't used in this configuration (No WFQ is enabled) and will be +* configured acording to spec +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params, + const struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 min_w_val = bnx2x_ets_get_min_w_val_nig(vars); + /** + * mapping between entry priority to client number (0,1,2 -debug and + * management clients, 3 - COS0 client, 4 - COS1, ... 8 - + * COS5)(HIGHEST) 4bits client num.TODO_ETS - Should be done by + * reset value or init tool + */ + if (port) { + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, 0x543210); + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB, 0x0); + } else { + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, 0x76543210); + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, 0x8); + } + /** + * For strict priority entries defines the number of consecutive + * slots for the highest priority. + */ + /* TODO_ETS - Should be done by reset value or init tool */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS : + NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); + /** + * mapping between the CREDIT_WEIGHT registers and actual client + * numbers + */ + /* TODO_ETS - Should be done by reset value or init tool */ + if (port) { + /*Port 1 has 6 COS*/ + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB, 0x210543); + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x0); + } else { + /*Port 0 has 9 COS*/ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB, + 0x43210876); + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x5); + } + + /** + * Bitmap of 5bits length. Each bit specifies whether the entry behaves + * as strict. Bits 0,1,2 - debug and management entries, 3 - + * COS0 entry, 4 - COS1 entry. + * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT + * bit4 bit3 bit2 bit1 bit0 + * MCP and debug are strict + */ + if (port) + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT, 0x3f); + else + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1ff); + /* defines which entries (clients) are subjected to WFQ arbitration */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : + NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0); + + /** + * Please notice the register address are note continuous and a + * for here is note appropriate.In 2 port mode port0 only COS0-5 + * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4 + * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT + * are never used for WFQ + */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5, 0x0); + if (0 == port) { + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6, 0x0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7, 0x0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8, 0x0); + } + + bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val); +} +/****************************************************************************** +* Description: +* Set credit upper bound for PBF. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_set_credit_upper_bound_pbf( + const struct link_params *params, + const u32 min_w_val) +{ + struct bnx2x *bp = params->bp; + const u32 credit_upper_bound = + bnx2x_ets_get_credit_upper_bound(min_w_val); + const u8 port = params->port; + u32 base_upper_bound = 0; + u8 max_cos = 0; + u8 i = 0; + /** + * In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4 + * port mode port1 has COS0-2 that can be used for WFQ. + */ + if (0 == port) { + base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P0; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; + } else { + base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P1; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; + } + + for (i = 0; i < max_cos; i++) + REG_WR(bp, base_upper_bound + (i << 2), credit_upper_bound); +} +/****************************************************************************** +* Description: +* Will return the PBF ETS registers to init values.Except +* credit_upper_bound. +* That isn't used in this configuration (No WFQ is enabled) and will be +* configured acording to spec +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; + u8 i = 0; + u32 base_weight = 0; + u8 max_cos = 0; + + /** + * mapping between entry priority to client number 0 - COS0 + * client, 2 - COS1, ... 5 - COS5)(HIGHEST) 4bits client num. + * TODO_ETS - Should be done by reset value or init tool + */ + if (port) + /* 0x688 (|011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , 0x688); + else + /* (10 1|100 |011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , 0x2C688); + + /* TODO_ETS - Should be done by reset value or init tool */ + if (port) + /* 0x688 (|011|0 10|00 1|000)*/ + REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1, 0x688); + else + /* 0x2C688 (10 1|100 |011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0, 0x2C688); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 : + PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 , 0x100); + + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , 0); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 , 0); + /** + * In 2 port mode port0 has COS0-5 that can be used for WFQ. + * In 4 port mode port1 has COS0-2 that can be used for WFQ. + */ + if (0 == port) { + base_weight = PBF_REG_COS0_WEIGHT_P0; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; + } else { + base_weight = PBF_REG_COS0_WEIGHT_P1; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; + } + + for (i = 0; i < max_cos; i++) + REG_WR(bp, base_weight + (0x4 * i), 0); + + bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); +} +/****************************************************************************** +* Description: +* E3B0 disable will return basicly the values to init values. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_disabled(const struct link_params *params, + const struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + + if (!CHIP_IS_E3B0(bp)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" + "\n"); + return -EINVAL; + } + + bnx2x_ets_e3b0_nig_disabled(params, vars); + + bnx2x_ets_e3b0_pbf_disabled(params); + + return 0; +} + +/****************************************************************************** +* Description: +* Disable will return basicly the values to init values. +*. +******************************************************************************/ +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + + if ((CHIP_IS_E2(bp)) || (CHIP_IS_E3A0(bp))) + bnx2x_ets_e2e3a0_disabled(params); + else if (CHIP_IS_E3B0(bp)) + bnx2x_status = bnx2x_ets_e3b0_disabled(params, vars); + else { + DP(NETIF_MSG_LINK, "bnx2x_ets_disabled - chip not supported\n"); + return -EINVAL; + } + + return bnx2x_status; +} + +/****************************************************************************** +* Description +* Set the COS mappimg to SP and BW until this point all the COS are not +* set as SP or BW. +******************************************************************************/ +static int bnx2x_ets_e3b0_cli_map(const struct link_params *params, + const struct bnx2x_ets_params *ets_params, + const u8 cos_sp_bitmap, + const u8 cos_bw_bitmap) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u8 nig_cli_sp_bitmap = 0x7 | (cos_sp_bitmap << 3); + const u8 pbf_cli_sp_bitmap = cos_sp_bitmap; + const u8 nig_cli_subject2wfq_bitmap = cos_bw_bitmap << 3; + const u8 pbf_cli_subject2wfq_bitmap = cos_bw_bitmap; + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT : + NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, nig_cli_sp_bitmap); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , pbf_cli_sp_bitmap); + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : + NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, + nig_cli_subject2wfq_bitmap); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0, + pbf_cli_subject2wfq_bitmap); + + return 0; +} + +/****************************************************************************** +* Description: +* This function is needed because NIG ARB_CREDIT_WEIGHT_X are +* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. +******************************************************************************/ +static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, + const u8 cos_entry, + const u32 min_w_val_nig, + const u32 min_w_val_pbf, + const u16 total_bw, + const u8 bw, + const u8 port) +{ + u32 nig_reg_adress_crd_weight = 0; + u32 pbf_reg_adress_crd_weight = 0; + /* Calculate and set BW for this COS*/ + const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw; + const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw; + + switch (cos_entry) { + case 0: + nig_reg_adress_crd_weight = + (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0; + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS0_WEIGHT_P1 : PBF_REG_COS0_WEIGHT_P0; + break; + case 1: + nig_reg_adress_crd_weight = (port) ? + NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1; + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS1_WEIGHT_P1 : PBF_REG_COS1_WEIGHT_P0; + break; + case 2: + nig_reg_adress_crd_weight = (port) ? + NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2; + + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS2_WEIGHT_P1 : PBF_REG_COS2_WEIGHT_P0; + break; + case 3: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3; + pbf_reg_adress_crd_weight = + PBF_REG_COS3_WEIGHT_P0; + break; + case 4: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4; + pbf_reg_adress_crd_weight = PBF_REG_COS4_WEIGHT_P0; + break; + case 5: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5; + pbf_reg_adress_crd_weight = PBF_REG_COS5_WEIGHT_P0; + break; + } + + REG_WR(bp, nig_reg_adress_crd_weight, cos_bw_nig); + + REG_WR(bp, pbf_reg_adress_crd_weight, cos_bw_pbf); + + return 0; +} +/****************************************************************************** +* Description: +* Calculate the total BW.A value of 0 isn't legal. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_get_total_bw( + const struct link_params *params, + const struct bnx2x_ets_params *ets_params, + u16 *total_bw) +{ + struct bnx2x *bp = params->bp; + u8 cos_idx = 0; + + *total_bw = 0 ; + /* Calculate total BW requested */ + for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { + if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { + + if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" + "was set to 0\n"); + return -EINVAL; + } + *total_bw += + ets_params->cos[cos_idx].params.bw_params.bw; + } + } + + /*Check taotl BW is valid */ + if ((100 != *total_bw) || (0 == *total_bw)) { + if (0 == *total_bw) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" + "shouldn't be 0\n"); + return -EINVAL; + } + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be" + "100\n"); + /** + * We can handle a case whre the BW isn't 100 this can happen + * if the TC are joined. + */ + } + return 0; +} + +/****************************************************************************** +* Description: +* Invalidate all the sp_pri_to_cos. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_sp_pri_to_cos_init(u8 *sp_pri_to_cos) +{ + u8 pri = 0; + for (pri = 0; pri < DCBX_MAX_NUM_COS; pri++) + sp_pri_to_cos[pri] = DCBX_INVALID_COS; +} +/****************************************************************************** +* Description: +* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers +* according to sp_pri_to_cos. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, + u8 *sp_pri_to_cos, const u8 pri, + const u8 cos_entry) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + + if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " + "parameter There can't be two COS's with" + "the same strict pri\n"); + return -EINVAL; + } + + if (pri > max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid" + "parameter Illegal strict priority\n"); + return -EINVAL; + } + + sp_pri_to_cos[pri] = cos_entry; + return 0; + +} + +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in +* the sp_pri_cli register. +*. +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg(const u8 cos, const u8 cos_offset, + const u8 pri_set, + const u8 pri_offset, + const u8 entry_size) +{ + u64 pri_cli_nig = 0; + pri_cli_nig = ((u64)(cos + cos_offset)) << (entry_size * + (pri_set + pri_offset)); + + return pri_cli_nig; +} +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in the +* sp_pri_cli register for NIG. +*. +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg_nig(const u8 cos, const u8 pri_set) +{ + /* MCP Dbg0 and dbg1 are always with higher strict pri*/ + const u8 nig_cos_offset = 3; + const u8 nig_pri_offset = 3; + + return bnx2x_e3b0_sp_get_pri_cli_reg(cos, nig_cos_offset, pri_set, + nig_pri_offset, 4); + +} +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in the +* sp_pri_cli register for PBF. +*. +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg_pbf(const u8 cos, const u8 pri_set) +{ + const u8 pbf_cos_offset = 0; + const u8 pbf_pri_offset = 0; + + return bnx2x_e3b0_sp_get_pri_cli_reg(cos, pbf_cos_offset, pri_set, + pbf_pri_offset, 3); + +} + +/****************************************************************************** +* Description: +* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers +* according to sp_pri_to_cos.(which COS has higher priority) +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_sp_set_pri_cli_reg(const struct link_params *params, + u8 *sp_pri_to_cos) +{ + struct bnx2x *bp = params->bp; + u8 i = 0; + const u8 port = params->port; + /* MCP Dbg0 and dbg1 are always with higher strict pri*/ + u64 pri_cli_nig = 0x210; + u32 pri_cli_pbf = 0x0; + u8 pri_set = 0; + u8 pri_bitmask = 0; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + + u8 cos_bit_to_set = (1 << max_num_of_cos) - 1; + + /* Set all the strict priority first */ + for (i = 0; i < max_num_of_cos; i++) { + if (DCBX_INVALID_COS != sp_pri_to_cos[i]) { + if (DCBX_MAX_NUM_COS <= sp_pri_to_cos[i]) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_sp_set_pri_cli_reg " + "invalid cos entry\n"); + return -EINVAL; + } + + pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( + sp_pri_to_cos[i], pri_set); + + pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( + sp_pri_to_cos[i], pri_set); + pri_bitmask = 1 << sp_pri_to_cos[i]; + /* COS is used remove it from bitmap.*/ + if (0 == (pri_bitmask & cos_bit_to_set)) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_sp_set_pri_cli_reg " + "invalid There can't be two COS's with" + " the same strict pri\n"); + return -EINVAL; + } + cos_bit_to_set &= ~pri_bitmask; + pri_set++; + } + } + + /* Set all the Non strict priority i= COS*/ + for (i = 0; i < max_num_of_cos; i++) { + pri_bitmask = 1 << i; + /* Check if COS was already used for SP */ + if (pri_bitmask & cos_bit_to_set) { + /* COS wasn't used for SP */ + pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( + i, pri_set); + + pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( + i, pri_set); + /* COS is used remove it from bitmap.*/ + cos_bit_to_set &= ~pri_bitmask; + pri_set++; + } + } + + if (pri_set != max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_set_pri_cli_reg not all " + "entries were set\n"); + return -EINVAL; + } + + if (port) { + /* Only 6 usable clients*/ + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, + (u32)pri_cli_nig); + + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , pri_cli_pbf); + } else { + /* Only 9 usable clients*/ + const u32 pri_cli_nig_lsb = (u32) (pri_cli_nig); + const u32 pri_cli_nig_msb = (u32) ((pri_cli_nig >> 32) & 0xF); + + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, + pri_cli_nig_lsb); + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, + pri_cli_nig_msb); + + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , pri_cli_pbf); + } + return 0; +} + +/****************************************************************************** +* Description: +* Configure the COS to ETS according to BW and SP settings. +******************************************************************************/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + const struct bnx2x_ets_params *ets_params) +{ + struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + const u8 port = params->port; + u16 total_bw = 0; + const u32 min_w_val_nig = bnx2x_ets_get_min_w_val_nig(vars); + const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; + u8 cos_bw_bitmap = 0; + u8 cos_sp_bitmap = 0; + u8 sp_pri_to_cos[DCBX_MAX_NUM_COS] = {0}; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + u8 cos_entry = 0; + + if (!CHIP_IS_E3B0(bp)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" + "\n"); + return -EINVAL; + } + + if ((ets_params->num_of_cos > max_num_of_cos)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config the number of COS " + "isn't supported\n"); + return -EINVAL; + } + + /* Prepare sp strict priority parameters*/ + bnx2x_ets_e3b0_sp_pri_to_cos_init(sp_pri_to_cos); + + /* Prepare BW parameters*/ + bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params, + &total_bw); + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed " + "\n"); + return -EINVAL; + } + + /** + * Upper bound is set according to current link speed (min_w_val + * should be the same for upper bound and COS credit val). + */ + bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val_nig); + bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); + + + for (cos_entry = 0; cos_entry < ets_params->num_of_cos; cos_entry++) { + if (bnx2x_cos_state_bw == ets_params->cos[cos_entry].state) { + cos_bw_bitmap |= (1 << cos_entry); + /** + * The function also sets the BW in HW(not the mappin + * yet) + */ + bnx2x_status = bnx2x_ets_e3b0_set_cos_bw( + bp, cos_entry, min_w_val_nig, min_w_val_pbf, + total_bw, + ets_params->cos[cos_entry].params.bw_params.bw, + port); + } else if (bnx2x_cos_state_strict == + ets_params->cos[cos_entry].state){ + cos_sp_bitmap |= (1 << cos_entry); + + bnx2x_status = bnx2x_ets_e3b0_sp_pri_to_cos_set( + params, + sp_pri_to_cos, + ets_params->cos[cos_entry].params.sp_params.pri, + cos_entry); + + } else { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not" + " valid\n"); + return -EINVAL; + } + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw " + "failed\n"); + return bnx2x_status; + } + } + + /* Set SP register (which COS has higher priority) */ + bnx2x_status = bnx2x_ets_e3b0_sp_set_pri_cli_reg(params, + sp_pri_to_cos); + + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg " + "failed\n"); + return bnx2x_status; + } + + /* Set client mapping of BW and strict */ + bnx2x_status = bnx2x_ets_e3b0_cli_map(params, ets_params, + cos_sp_bitmap, + cos_bw_bitmap); + + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config SP failed\n"); + return bnx2x_status; + } + return 0; +} static void bnx2x_ets_bw_limit_common(const struct link_params *params) { /* ETS disabled configuration */ diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index 82bc021bdf07..3d9c46bb108c 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -411,6 +411,38 @@ struct bnx2x_nig_brb_pfc_port_params { u32 cos1_pauseable; }; + +/* ETS port configuration params */ +struct bnx2x_ets_bw_params { + u8 bw; +}; + +struct bnx2x_ets_sp_params { + /** + * valid values are 0 - 5. 0 is highest strict priority. + * There can't be two COS's with the same pri. + */ + u8 pri; +}; + +enum bnx2x_cos_state { + bnx2x_cos_state_strict = 0, + bnx2x_cos_state_bw = 1, +}; + +struct bnx2x_ets_cos_params { + enum bnx2x_cos_state state ; + union { + struct bnx2x_ets_bw_params bw_params; + struct bnx2x_ets_sp_params sp_params; + } params; +}; + +struct bnx2x_ets_params { + u8 num_of_cos; /* Number of valid COS entries*/ + struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS]; +}; + /** * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB * when link is already up @@ -421,7 +453,8 @@ int bnx2x_update_pfc(struct link_params *params, /* Used to configure the ETS to disable */ -void bnx2x_ets_disabled(struct link_params *params); +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars); /* Used to configure the ETS to BW limited */ void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, @@ -430,6 +463,11 @@ void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, /* Used to configure the ETS to strict */ int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); + +/* Configure the COS to ETS according to BW and SP settings.*/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + const struct bnx2x_ets_params *ets_params); /* Read pfc statistic*/ void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, u32 pfc_frames_sent[2], diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index bf43b9b16d8b..d0cf072d21eb 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -2057,6 +2057,26 @@ * clients that are not subject to WFQ credit blocking - their * specifications here are not used. */ #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0 +/* [RW 32] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x18688 +/* [RW 4] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x1868c /* [RW 5] Specify whether the client competes directly in the strict * priority arbiter. The bits are mapped according to client ID (client IDs * are defined in tx_arb_priority_client). Default value is set to enable @@ -2071,10 +2091,24 @@ * reach. */ #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 0x18114 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 0x18118 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 0x1811c +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 0x186a0 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 0x186a4 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 0x186a8 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 0x186ac /* [RW 32] Specify the weight (in bytes) to be added to credit register 0 * when it is time to increment. */ #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 0x18100 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 0x18104 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 0x18108 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 0x18690 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 0x18694 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 0x18698 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 0x1869c /* [RW 12] Specify the number of strict priority arbitration slots between * two round-robin arbitration slots to avoid starvation. A value of 0 means * no strict priority cycles - the strict priority with anti-starvation @@ -2094,6 +2128,26 @@ #define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c #define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0 #define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460 +/* [RW 32] Specify the client number to be assigned to each priority of the + * strict priority arbiter. This register specifies bits 31:0 of the 36-bit + * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + * client; bits [35-32] are for priority 8 client. The clients are assigned + * the following IDs: 0-management; 1-debug traffic from this port; 2-debug + * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + * accommodate the 9 input clients to ETS arbiter. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB 0x18680 +/* [RW 4] Specify the client number to be assigned to each priority of the + * strict priority arbiter. This register specifies bits 35:32 of the 36-bit + * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + * client; bits [35-32] are for priority 8 client. The clients are assigned + * the following IDs: 0-management; 1-debug traffic from this port; 2-debug + * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + * accommodate the 9 input clients to ETS arbiter. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684 #define NIG_REG_P1_MAC_IN_EN 0x185c0 /* [RW 1] Output enable for TX MAC interface */ #define NIG_REG_P1_MAC_OUT_EN 0x185c4 @@ -2164,6 +2218,54 @@ * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is * 0 for not using WFQ credit blocking. */ #define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x18238 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 0x18258 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 0x1825c +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 0x18260 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 0x18264 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 0x18268 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 0x186f4 +/* [RW 32] Specify the weight (in bytes) to be added to credit register 0 + * when it is time to increment. */ +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 0x18244 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 0x18248 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 0x1824c +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 0x18250 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 0x18254 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 0x186f0 +/* [RW 12] Specify the number of strict priority arbitration slots between + two round-robin arbitration slots to avoid starvation. A value of 0 means + no strict priority cycles - the strict priority with anti-starvation + arbiter becomes a round-robin arbiter. */ +#define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS 0x18240 +/* [RW 32] Specify the client number to be assigned to each priority of the + strict priority arbiter. This register specifies bits 31:0 of the 36-bit + value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + client; bits [35-32] are for priority 8 client. The clients are assigned + the following IDs: 0-management; 1-debug traffic from this port; 2-debug + traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + accommodate the 9 input clients to ETS arbiter. Note that this register + is the same as the one for port 0, except that port 1 only has COS 0-2 + traffic. There is no traffic for COS 3-5 of port 1. */ +#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB 0x186e0 +/* [RW 4] Specify the client number to be assigned to each priority of the + strict priority arbiter. This register specifies bits 35:32 of the 36-bit + value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + client; bits [35-32] are for priority 8 client. The clients are assigned + the following IDs: 0-management; 1-debug traffic from this port; 2-debug + traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + accommodate the 9 input clients to ETS arbiter. Note that this register + is the same as the one for port 0, except that port 1 only has COS 0-2 + traffic. There is no traffic for COS 3-5 of port 1. */ +#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4 +/* [R 1] TX FIFO for transmitting data to MAC is empty. */ +#define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594 +/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets + forwarded to the host. */ +#define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8 /* [RW 32] Specify the upper bound that credit register 0 is allowed to * reach. */ /* [RW 1] Pause enable for port0. This register may get 1 only when @@ -2249,12 +2351,36 @@ #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18 /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */ #define PBF_REG_COS0_UPPER_BOUND 0x15c05c +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter + * of port 0. */ +#define PBF_REG_COS0_UPPER_BOUND_P0 0x15c2cc +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter + * of port 1. */ +#define PBF_REG_COS0_UPPER_BOUND_P1 0x15c2e4 /* [RW 31] The weight of COS0 in the ETS command arbiter. */ #define PBF_REG_COS0_WEIGHT 0x15c054 +/* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT_P0 0x15c2a8 +/* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT_P1 0x15c2c0 /* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */ #define PBF_REG_COS1_UPPER_BOUND 0x15c060 /* [RW 31] The weight of COS1 in the ETS command arbiter. */ #define PBF_REG_COS1_WEIGHT 0x15c058 +/* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT_P0 0x15c2ac +/* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT_P1 0x15c2c4 +/* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */ +#define PBF_REG_COS2_WEIGHT_P0 0x15c2b0 +/* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */ +#define PBF_REG_COS2_WEIGHT_P1 0x15c2c8 +/* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */ +#define PBF_REG_COS3_WEIGHT_P0 0x15c2b4 +/* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */ +#define PBF_REG_COS4_WEIGHT_P0 0x15c2b8 +/* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */ +#define PBF_REG_COS5_WEIGHT_P0 0x15c2bc /* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte * lines. */ #define PBF_REG_CREDIT_LB_Q 0x140338 @@ -2274,6 +2400,52 @@ current task in process). */ #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c #define PBF_REG_DISABLE_PF 0x1402e8 +/* [RW 18] For port 0: For each client that is subject to WFQ (the + * corresponding bit is 1); indicates to which of the credit registers this + * client is mapped. For clients which are not credit blocked; their mapping + * is dont care. */ +#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 0x15c288 +/* [RW 9] For port 1: For each client that is subject to WFQ (the + * corresponding bit is 1); indicates to which of the credit registers this + * client is mapped. For clients which are not credit blocked; their mapping + * is dont care. */ +#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 0x15c28c +/* [RW 6] For port 0: Bit per client to indicate if the client competes in + * the strict priority arbiter directly (corresponding bit = 1); or first + * goes to the RR arbiter (corresponding bit = 0); and then competes in the + * lowest priority in the strict-priority arbiter. */ +#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 0x15c278 +/* [RW 3] For port 1: Bit per client to indicate if the client competes in + * the strict priority arbiter directly (corresponding bit = 1); or first + * goes to the RR arbiter (corresponding bit = 0); and then competes in the + * lowest priority in the strict-priority arbiter. */ +#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 0x15c27c +/* [RW 6] For port 0: Bit per client to indicate if the client is subject to + * WFQ credit blocking (corresponding bit = 1). */ +#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 0x15c280 +/* [RW 3] For port 0: Bit per client to indicate if the client is subject to + * WFQ credit blocking (corresponding bit = 1). */ +#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 0x15c284 +/* [RW 16] For port 0: The number of strict priority arbitration slots + * between 2 RR arbitration slots. A value of 0 means no strict priority + * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR + * arbiter. */ +#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 0x15c2a0 +/* [RW 16] For port 1: The number of strict priority arbitration slots + * between 2 RR arbitration slots. A value of 0 means no strict priority + * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR + * arbiter. */ +#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 0x15c2a4 +/* [RW 18] For port 0: Indicates which client is connected to each priority + * in the strict-priority arbiter. Priority 0 is the highest priority, and + * priority 5 is the lowest; to which the RR output is connected to (this is + * not configurable). */ +#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 0x15c270 +/* [RW 9] For port 1: Indicates which client is connected to each priority + * in the strict-priority arbiter. Priority 0 is the highest priority, and + * priority 5 is the lowest; to which the RR output is connected to (this is + * not configurable). */ +#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 0x15c274 /* [RW 1] Indicates that ETS is performed between the COSes in the command * arbiter. If reset strict priority w/ anti-starvation will be performed * w/o WFQ. */ -- 2.39.2