From 9ca953a3d6a649f4d5d2a4f1d5d51db10de46e5b Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 31 Aug 2018 17:11:13 +0200 Subject: [PATCH] MIPS: dts: mscc: Add i2c on ocelot Ocelot has an i2c controller, add it. There is only one possible pinmux configuration so add it as well. Signed-off-by: Alexandre Belloni Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/20353/ Cc: Wolfram Sang Cc: Jarkko Nikula Cc: James Hogan Cc: Andy Shevchenko Cc: Mika Westerberg Cc: linux-i2c@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Thomas Petazzoni Cc: Allan Nielsen --- arch/mips/boot/dts/mscc/ocelot.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index f7eb612b46ba..99a9e8555087 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -78,6 +78,19 @@ status = "disabled"; }; + i2c: i2c@100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x100400 0x100>, <0x198 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + uart2: serial@100800 { pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; @@ -183,6 +196,11 @@ interrupts = <13>; #interrupt-cells = <2>; + i2c_pins: i2c-pins { + pins = "GPIO_16", "GPIO_17"; + function = "twi"; + }; + uart_pins: uart-pins { pins = "GPIO_6", "GPIO_7"; function = "uart"; @@ -197,6 +215,7 @@ pins = "GPIO_14", "GPIO_15"; function = "miim1"; }; + }; mdio0: mdio@107009c { -- 2.39.5