From a8bfeceb0c1400b9331c00f6969afa6cb82d5d4a Mon Sep 17 00:00:00 2001 From: "Zhu, Richard \\(NSN - CN/Beijing\\)" Date: Tue, 1 Jul 2014 07:14:23 +0000 Subject: [PATCH] hwmon: (pmbus) Add tps40422 front-end driver For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command on page 0, this will lead to a result that the temperature sensor in page 1 couldn't be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo front-end driver. Signed-off-by: Zhu Laiwen [Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)] Signed-off-by: Guenter Roeck --- Documentation/hwmon/pmbus | 5 ++- Documentation/hwmon/tps40422 | 64 ++++++++++++++++++++++++++++++++++ drivers/hwmon/pmbus/Kconfig | 13 +++++-- drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/pmbus.c | 1 - drivers/hwmon/pmbus/tps40422.c | 64 ++++++++++++++++++++++++++++++++++ 6 files changed, 142 insertions(+), 6 deletions(-) create mode 100644 Documentation/hwmon/tps40422 create mode 100644 drivers/hwmon/pmbus/tps40422.c diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index cf756ed48ff9..a3557da8f5b4 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -23,12 +23,11 @@ Supported chips: http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf - * Texas Instruments TPS40400, TPS40422 - Prefixes: 'tps40400', 'tps40422' + * Texas Instruments TPS40400 + Prefixes: 'tps40400' Addresses scanned: - Datasheets: http://www.ti.com/lit/gpn/tps40400 - http://www.ti.com/lit/gpn/tps40422 * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - diff --git a/Documentation/hwmon/tps40422 b/Documentation/hwmon/tps40422 new file mode 100644 index 000000000000..24bb0688d515 --- /dev/null +++ b/Documentation/hwmon/tps40422 @@ -0,0 +1,64 @@ +Kernel driver tps40422 +====================== + +Supported chips: + * TI TPS40422 + Prefix: 'tps40422' + Addresses scanned: - + Datasheet: http://www.ti.com/lit/gpn/tps40422 + +Author: Zhu Laiwen + + +Description +----------- + +This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck +Controller with PMBus + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. + +in[1-2]_label "vout[1-2]" +in[1-2]_input Measured voltage. From READ_VOUT register. +in[1-2]_alarm voltage alarm. + +curr[1-2]_input Measured current. From READ_IOUT register. +curr[1-2]_label "iout[1-2]" +curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status. +curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. +curr2_alarm Current high alarm. From IOUT_OC_WARNING status. + +temp1_input Measured temperature. From READ_TEMPERATURE_2 register on page 0. +temp1_max Maximum temperature. From OT_WARN_LIMIT register. +temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp1_max_alarm Chip temperature high alarm. Set by comparing + READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING + status is set. +temp1_crit_alarm Chip temperature critical high alarm. Set by comparing + READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT + status is set. +temp2_input Measured temperature. From READ_TEMPERATURE_2 register on page 1. +temp2_alarm Chip temperature alarm on page 1. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 39cc63edfbb0..6e1e4935fc62 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -20,8 +20,7 @@ config SENSORS_PMBUS help If you say yes here you get hardware monitoring support for generic PMBus devices, including but not limited to ADP4000, BMR453, BMR454, - MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, TPS40400, - and TPS40422. + MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, and TPS40400. This driver can also be built as a module. If so, the module will be called pmbus. @@ -87,6 +86,16 @@ config SENSORS_MAX8688 This driver can also be built as a module. If so, the module will be called max8688. +config SENSORS_TPS40422 + tristate "TI TPS40422" + default n + help + If you say yes here you get hardware monitoring support for TI + TPS40422. + + This driver can also be built as a module. If so, the module will + be called tps40422. + config SENSORS_UCD9000 tristate "TI UCD90120, UCD90124, UCD9090, UCD90910" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 789376c85dbb..1454293e985c 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o +obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 7e91700131a7..554d0249dcde 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -193,7 +193,6 @@ static const struct i2c_device_id pmbus_id[] = { {"pdt012", 1}, {"pmbus", 0}, {"tps40400", 1}, - {"tps40422", 2}, {"udt020", 1}, {} }; diff --git a/drivers/hwmon/pmbus/tps40422.c b/drivers/hwmon/pmbus/tps40422.c new file mode 100644 index 000000000000..32803825d47e --- /dev/null +++ b/drivers/hwmon/pmbus/tps40422.c @@ -0,0 +1,64 @@ +/* + * Hardware monitoring driver for TI TPS40422 + * + * Copyright (c) 2014 Nokia Solutions and Networks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "pmbus.h" + +static struct pmbus_driver_info tps40422_info = { + .pages = 2, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = linear, + .format[PSC_TEMPERATURE] = linear, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, +}; + +static int tps40422_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &tps40422_info); +} + +static const struct i2c_device_id tps40422_id[] = { + {"tps40422", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tps40422_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver tps40422_driver = { + .driver = { + .name = "tps40422", + }, + .probe = tps40422_probe, + .remove = pmbus_do_remove, + .id_table = tps40422_id, +}; + +module_i2c_driver(tps40422_driver); + +MODULE_AUTHOR("Zhu Laiwen "); +MODULE_DESCRIPTION("PMBus driver for TI TPS40422"); +MODULE_LICENSE("GPL"); -- 2.39.5