From b3d18de3e8231d15a0260a09e79ee4435f8d9161 Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Mon, 30 Dec 2019 17:30:20 +0530 Subject: [PATCH] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio and phy-mode properties. So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file. Cc: Jacopo Mondi Signed-off-by: Michael Trimarchi Signed-off-by: Jagan Teki Tested-by: Jacopo Mondi Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi index d91d46b5898f..0fd7f2e24d9c 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi @@ -25,10 +25,8 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; - phy-mode = "rmii"; status = "okay"; }; -- 2.39.5