From b8afeaee9d03f644f72b35e8433c9c2f651ade9c Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 29 Jul 2021 17:46:20 -0500 Subject: [PATCH] ARM: dts: am57xx: Add PRU-ICSS nodes Add the DT nodes for the PRU-ICSS1 and PRU-ICSS2 processor subsystems that are present on AM57xx family of SoCs. Each PRU-ICSS instance is represented by a pruss node and other child nodes. The two PRU-ICSSs are identical to each other. They are not supported on DRA7xx SoCs in general, so the nodes are added under the respective interconnect target module nodes in a common am57-pruss.dtsi file. The file is already included only in the AM57xx related board files. The PRU-ICSSs on AM57xx are very similar to the PRUSS in AM33xx and AM437x except for variations in the RAM sizes and the number of interrupts coming into the MPU INTC. The interrupt events into the PRU-ICSS also requires programming of the corresponding crossbars properly. The PRUSS subsystem node contains the entire address space. The various sub-modules of the PRU-ICSS are represented as individual child nodes (so platform devices themselves) of the PRUSS subsystem node. These include the two PRU cores and the interrupt controller. All the Data RAMs are represented within a child node of its own named 'memories' without any compatible. The Real Time Media Independent Interface controller (MII_RT), and the CFG sub-module are represented as syscon nodes. The PRUSS CFG module has a clock mux for IEP clock, this clk node is added under the CFG child node 'clocks'. The default source for this mux clock is the ICSS_IEP_CLK clock. The DT nodes use all standard properties. The regs property in the PRU nodes define the addresses for the Instruction RAM, the Debug and Control sub-modules for that PRU core. The firmware for each PRU core is defined through a 'firmware-name' property. The default names for the firmware images for each PRU core are defined as follows (these can be adjusted either in derivative board dts files or through sysfs at runtime if required): PRU-ICSS1 PRU0 Core: am57xx-pru1_0-fw PRU-ICSS1 PRU1 Core: am57xx-pru1_1-fw PRU-ICSS2 PRU0 Core: am57xx-pru2_0-fw PRU-ICSS2 PRU1 Core: am57xx-pru2_1-fw Note: 1. There are few more sub-modules like the Industrial Ethernet Peripheral (IEPs), MDIO, UART, eCAP that do not have bindings and so will be added in the future. 2. The PRUSS INTC on AM57xx SoCs also connect the host interrupts 6 and 7 as possible DMA events, so use the 'ti,irqs-reserved' property in derivative board dts files _if_ any of them should not be handled by the host OS. Signed-off-by: Suman Anna Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57-pruss.dtsi | 158 +++++++++++++++++++++++++++++- 1 file changed, 157 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi index 032c1acfcda3..494d56830b34 100644 --- a/arch/arm/boot/dts/am57-pruss.dtsi +++ b/arch/arm/boot/dts/am57-pruss.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ * * Common PRUSS data for TI AM57xx platforms */ @@ -25,6 +25,84 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x4b200000 0x80000>; + + pruss1: pruss@0 { + compatible = "ti,am5728-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss1_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */ + <&dpll_gmac_h13x2_ck>; /* icss_clk */ + }; + }; + }; + + pruss1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss1_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru1_0: pru@34000 { + compatible = "ti,am5728-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am5728-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru1_1-fw"; + }; + }; }; pruss2_tm: target-module@4b2a6000 { @@ -46,5 +124,83 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x4b280000 0x80000>; + + pruss2: pruss@0 { + compatible = "ti,am5728-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss2_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss2_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss2_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&dpll_gmac_m3x2_ck>, /* icss_iep_clk */ + <&dpll_gmac_h13x2_ck>; /* icss_clk */ + }; + }; + }; + + pruss2_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss2_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru2_0: pru@34000 { + compatible = "ti,am5728-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru2_0-fw"; + }; + + pru2_1: pru@38000 { + compatible = "ti,am5728-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am57xx-pru2_1-fw"; + }; + }; }; }; -- 2.39.5