From bb726b753f75a4eeda291438f89dfd9b94783569 Mon Sep 17 00:00:00 2001 From: Clark Wang Date: Wed, 17 Aug 2022 09:36:18 +0800 Subject: [PATCH] net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG RTL8211F(D)(I)-VD-CG is the pin-to-pin upgrade chip from RTL8211F(D)(I)-CG. Add new PHY ID for this chip. It does not support RTL8211F_PHYCR2 anymore, so remove the w/r operation of this register. Signed-off-by: Clark Wang Signed-off-by: Wei Fang Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 44 ++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index a5671ab896b3..3d99fd6664d7 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -70,6 +70,7 @@ #define RTLGEN_SPEED_MASK 0x0630 #define RTL_GENERIC_PHYID 0x001cc800 +#define RTL_8211FVD_PHYID 0x001cc878 MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); @@ -78,6 +79,7 @@ MODULE_LICENSE("GPL"); struct rtl821x_priv { u16 phycr1; u16 phycr2; + bool has_phycr2; }; static int rtl821x_read_page(struct phy_device *phydev) @@ -94,6 +96,7 @@ static int rtl821x_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct rtl821x_priv *priv; + u32 phy_id = phydev->drv->phy_id; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -108,13 +111,16 @@ static int rtl821x_probe(struct phy_device *phydev) if (of_property_read_bool(dev->of_node, "realtek,aldps-enable")) priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF; - ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2); - if (ret < 0) - return ret; + priv->has_phycr2 = !(phy_id == RTL_8211FVD_PHYID); + if (priv->has_phycr2) { + ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2); + if (ret < 0) + return ret; - priv->phycr2 = ret & RTL8211F_CLKOUT_EN; - if (of_property_read_bool(dev->of_node, "realtek,clkout-disable")) - priv->phycr2 &= ~RTL8211F_CLKOUT_EN; + priv->phycr2 = ret & RTL8211F_CLKOUT_EN; + if (of_property_read_bool(dev->of_node, "realtek,clkout-disable")) + priv->phycr2 &= ~RTL8211F_CLKOUT_EN; + } phydev->priv = priv; @@ -400,12 +406,14 @@ static int rtl8211f_config_init(struct phy_device *phydev) val_rxdly ? "enabled" : "disabled"); } - ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2, - RTL8211F_CLKOUT_EN, priv->phycr2); - if (ret < 0) { - dev_err(dev, "clkout configuration failed: %pe\n", - ERR_PTR(ret)); - return ret; + if (priv->has_phycr2) { + ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2, + RTL8211F_CLKOUT_EN, priv->phycr2); + if (ret < 0) { + dev_err(dev, "clkout configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } } return genphy_soft_reset(phydev); @@ -923,6 +931,18 @@ static struct phy_driver realtek_drvs[] = { .resume = rtl821x_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID), + .name = "RTL8211F-VD Gigabit Ethernet", + .probe = rtl821x_probe, + .config_init = &rtl8211f_config_init, + .read_status = rtlgen_read_status, + .config_intr = &rtl8211f_config_intr, + .handle_interrupt = rtl8211f_handle_interrupt, + .suspend = genphy_suspend, + .resume = rtl821x_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, }, { .name = "Generic FE-GE Realtek PHY", .match_phy_device = rtlgen_match_phy_device, -- 2.39.5