From caf3f562e1161a86bd48a4c4c33af89d3693c658 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 27 Dec 2016 12:40:43 -0200 Subject: [PATCH] PCI: imx6: Remove redundant "Link never came up" message When a PCI card is not connected, the following messages are seen on mx6: imx6q-pcie 1ffc000.pcie: phy link never came up imx6q-pcie 1ffc000.pcie: Link never came up The first one comes from the pcie-designware.c core file, so remove the redundant one from the imx6 driver. Signed-off-by: Fabio Estevam Signed-off-by: Bjorn Helgaas Reviewed-by: Lucas Stach --- drivers/pci/host/pci-imx6.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index c8cefb078218..66c3b84a84d7 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -502,10 +502,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie) IMX6Q_GPR12_PCIE_CTL_2, 1 << 10); ret = imx6_pcie_wait_for_link(imx6_pcie); - if (ret) { - dev_info(dev, "Link never came up\n"); + if (ret) goto err_reset_phy; - } if (imx6_pcie->link_gen == 2) { /* Allow Gen2 mode after the link is up. */ -- 2.39.5