From cd28d1d6e52e740130745429b3ff0af7cbba7b2c Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Mon, 21 Jan 2019 14:43:17 +0530 Subject: [PATCH] net: phy: at803x: Disable phy delay for RGMII mode For RGMII mode, phy delay should be disabled. Add this case along with disable delay routines. Signed-off-by: Vinod Koul Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index f9432d053a22..8ff12938ab47 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -110,16 +110,16 @@ static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, return phy_write(phydev, AT803X_DEBUG_DATA, val); } -static inline int at803x_enable_rx_delay(struct phy_device *phydev) +static inline int at803x_disable_rx_delay(struct phy_device *phydev) { - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0, - AT803X_DEBUG_RX_CLK_DLY_EN); + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, + AT803X_DEBUG_RX_CLK_DLY_EN, 0); } -static inline int at803x_enable_tx_delay(struct phy_device *phydev) +static inline int at803x_disable_tx_delay(struct phy_device *phydev) { - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0, - AT803X_DEBUG_TX_CLK_DLY_EN); + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, + AT803X_DEBUG_TX_CLK_DLY_EN, 0); } /* save relevant PHY registers to private copy */ @@ -256,15 +256,17 @@ static int at803x_config_init(struct phy_device *phydev) return ret; if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { - ret = at803x_enable_rx_delay(phydev); + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII) { + ret = at803x_disable_rx_delay(phydev); if (ret < 0) return ret; } if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { - ret = at803x_enable_tx_delay(phydev); + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII) { + ret = at803x_disable_tx_delay(phydev); if (ret < 0) return ret; } -- 2.39.5