From e586bb66b57c2a50d464d0f87cf8c7c9c3b36835 Mon Sep 17 00:00:00 2001 From: Henry Tieman Date: Tue, 8 Nov 2016 13:05:07 -0800 Subject: [PATCH] i40e: Pass unknown PHY type for unknown PHYs The PHY type value for unrecognized PHYs and cables was changed based on firmware version number. Newer hardware use lower firmware version numbers and this was causing some PHYs to be identified as type 0x16 instead of 0xe (unknown). Without this patch, newer card will incorrectly identify unknown PHYs and cables. This change adds hardware type to the check for firmware version so the PHY type is reported correctly. Change-ID: I0723cbfd263c76fc73ff1a5275d1639051376c9a Signed-off-by: Henry Tieman Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index fc7ce0238dea..f6fee7950726 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -1854,7 +1854,8 @@ i40e_status i40e_aq_get_link_info(struct i40e_hw *hw, else hw_link_info->lse_enable = false; - if ((hw->aq.fw_maj_ver < 4 || (hw->aq.fw_maj_ver == 4 && + if ((hw->mac.type == I40E_MAC_XL710) && + (hw->aq.fw_maj_ver < 4 || (hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver < 40)) && hw_link_info->phy_type == 0xE) hw_link_info->phy_type = I40E_PHY_TYPE_10GBASE_SFPP_CU; -- 2.39.5