From f4bd542bcaee551fbc5b53061bd252b878712d4a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 10 Jan 2019 12:40:49 +0100 Subject: [PATCH] drm/fb-helper: Scale back depth to supported maximum MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The following happened when migrating an old fbdev driver to DRM: The Integrator/CP PL111 supports 16BPP but only ARGB1555/ABGR1555 or XRGB1555/XBGR1555 i.e. the maximum depth is 15. This makes the initialization of the framebuffer fail since the code in drm_fb_helper_single_fb_probe() assigns the same value to sizes.surface_bpp and sizes.surface_depth. I.e. it simply assumes a 1-to-1 mapping between BPP and depth, which is true in most cases but not for this hardware that only support odd formats. To support the odd case of a driver supporting 16BPP with only 15 bits of depth, this patch will make the code loop over the formats supported on the primary plane on each CRTC managed by the FB helper and cap the depth to the maximum supported on any primary plane. On the PL110 Integrator, this makes drm_mode_legacy_fb_format() select DRM_FORMAT_XRGB1555 which is acceptable for this driver, and thus we get framebuffer, penguin and console on the Integrator/CP. Cc: Noralf Trønnes Cc: Ville Syrjälä Reviewed-by: Daniel Vetter Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20190110114049.10618-1-linus.walleij@linaro.org --- drivers/gpu/drm/drm_fb_helper.c | 55 ++++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index a83d9c73bcc8..883a0c44714c 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1797,6 +1797,7 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, int i; struct drm_fb_helper_surface_size sizes; int gamma_size = 0; + int best_depth = 0; memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size)); sizes.surface_depth = 24; @@ -1804,7 +1805,10 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, sizes.fb_width = (u32)-1; sizes.fb_height = (u32)-1; - /* if driver picks 8 or 16 by default use that for both depth/bpp */ + /* + * If driver picks 8 or 16 by default use that for both depth/bpp + * to begin with + */ if (preferred_bpp != sizes.surface_bpp) sizes.surface_depth = sizes.surface_bpp = preferred_bpp; @@ -1839,6 +1843,55 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, } } + /* + * If we run into a situation where, for example, the primary plane + * supports RGBA5551 (16 bpp, depth 15) but not RGB565 (16 bpp, depth + * 16) we need to scale down the depth of the sizes we request. + */ + for (i = 0; i < fb_helper->crtc_count; i++) { + struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; + struct drm_crtc *crtc = mode_set->crtc; + struct drm_plane *plane = crtc->primary; + int j; + + DRM_DEBUG("test CRTC %d primary plane\n", i); + + for (j = 0; j < plane->format_count; j++) { + const struct drm_format_info *fmt; + + fmt = drm_format_info(plane->format_types[j]); + + /* + * Do not consider YUV or other complicated formats + * for framebuffers. This means only legacy formats + * are supported (fmt->depth is a legacy field) but + * the framebuffer emulation can only deal with such + * formats, specifically RGB/BGA formats. + */ + if (fmt->depth == 0) + continue; + + /* We found a perfect fit, great */ + if (fmt->depth == sizes.surface_depth) { + best_depth = fmt->depth; + break; + } + + /* Skip depths above what we're looking for */ + if (fmt->depth > sizes.surface_depth) + continue; + + /* Best depth found so far */ + if (fmt->depth > best_depth) + best_depth = fmt->depth; + } + } + if (sizes.surface_depth != best_depth) { + DRM_INFO("requested bpp %d, scaled depth down to %d", + sizes.surface_bpp, best_depth); + sizes.surface_depth = best_depth; + } + crtc_count = 0; for (i = 0; i < fb_helper->crtc_count; i++) { struct drm_display_mode *desired_mode; -- 2.39.5