[mirror_edk2.git] / ArmPlatformPkg / ArmPlatformPkg.fdf

#\r
#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.Sec_ArmPlatform_EFI]\r
BaseAddress   = 0xEC000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.\r
Size          = 0x00020000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x00002000\r
NumBlocks     = 0x10\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00020000\r
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
FV = FVMAIN_SEC\r
\r
\r
[FD.ArmPlatform_EFI]\r
BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x200\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00200000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FVMAIN_SEC]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/Sec/Sec.inf\r
\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
FvNameGuid         = 8fa66cd0-f773-4f26-8f9f-5e54d0804c68\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  # Simple TextIn/TextOut for UEFI Terminal\r
  INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf\r
\r
  #\r
  # Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF EmbeddedPkg/Ebl/Ebl.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
  # Legacy Linux Loader\r
  INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.ARM.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
# The AArch64 Vector Table requires a 2K alignment that is not supported by the FDF specification.\r
# It is the reason 4K is used instead of 2K for the module alignment.\r
[Rule.AARCH64.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
Commit	Line	Data
1e57a462	1	#\r
0ead5ec4	2	# Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
1e57a462	3	#\r
6d0ca257 OM	4	# This program and the accompanying materials\r
	5	# are licensed and made available under the terms and conditions of the BSD License\r
	6	# which accompanies this distribution. The full text of the license may be found at\r
	7	# http://opensource.org/licenses/bsd-license.php\r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
1e57a462	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.Sec_ArmPlatform_EFI]\r
	28	BaseAddress = 0xEC000000\|gArmTokenSpaceGuid.PcdSecureFdBaseAddress #The base address of the Secure FLASH Device.\r
55b0a24a	29	Size = 0x00020000\|gArmTokenSpaceGuid.PcdSecureFdSize #The size in bytes of the Secure FLASH Device\r
1e57a462	30	ErasePolarity = 1\r
55b0a24a	31	BlockSize = 0x00002000\r
1e57a462	32	NumBlocks = 0x10\r
	33	\r
	34	################################################################################\r
	35	#\r
	36	# Following are lists of FD Region layout which correspond to the locations of different\r
	37	# images within the flash device.\r
	38	#\r
	39	# Regions must be defined in ascending order and may not overlap.\r
	40	#\r
	41	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	42	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	43	# "0x" characters. Like:\r
	44	# Offset\|Size\r
	45	# PcdOffsetCName\|PcdSizeCName\r
	46	# RegionType <FV, DATA, or FILE>\r
	47	#\r
	48	################################################################################\r
	49	\r
55b0a24a	50	0x00000000\|0x00020000\r
1e57a462	51	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize\r
	52	FV = FVMAIN_SEC\r
	53	\r
	54	\r
	55	[FD.ArmPlatform_EFI]\r
	56	BaseAddress = 0xEC200000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
	57	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	58	ErasePolarity = 1\r
	59	\r
	60	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	61	BlockSize = 0x00001000\r
	62	NumBlocks = 0x200\r
	63	\r
	64	################################################################################\r
	65	#\r
	66	# Following are lists of FD Region layout which correspond to the locations of different\r
	67	# images within the flash device.\r
	68	#\r
	69	# Regions must be defined in ascending order and may not overlap.\r
	70	#\r
	71	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	72	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	73	# "0x" characters. Like:\r
	74	# Offset\|Size\r
	75	# PcdOffsetCName\|PcdSizeCName\r
	76	# RegionType <FV, DATA, or FILE>\r
	77	#\r
	78	################################################################################\r
	79	\r
	80	0x00000000\|0x00200000\r
	81	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	82	FV = FVMAIN_COMPACT\r
	83	\r
	84	\r
	85	################################################################################\r
	86	#\r
	87	# FV Section\r
	88	#\r
	89	# [FV] section is used to define what components or modules are placed within a flash\r
	90	# device file. This section also defines order the components and modules are positioned\r
	91	# within the image. The [FV] section consists of define statements, set statements and\r
	92	# module statements.\r
	93	#\r
	94	################################################################################\r
	95	\r
	96	[FV.FVMAIN_SEC]\r
	97	FvAlignment = 8\r
	98	ERASE_POLARITY = 1\r
	99	MEMORY_MAPPED = TRUE\r
	100	STICKY_WRITE = TRUE\r
	101	LOCK_CAP = TRUE\r
	102	LOCK_STATUS = TRUE\r
	103	WRITE_DISABLED_CAP = TRUE\r
	104	WRITE_ENABLED_CAP = TRUE\r
	105	WRITE_STATUS = TRUE\r
	106	WRITE_LOCK_CAP = TRUE\r
	107	WRITE_LOCK_STATUS = TRUE\r
	108	READ_DISABLED_CAP = TRUE\r
	109	READ_ENABLED_CAP = TRUE\r
	110	READ_STATUS = TRUE\r
	111	READ_LOCK_CAP = TRUE\r
	112	READ_LOCK_STATUS = TRUE\r
	113	\r
	114	INF ArmPlatformPkg/Sec/Sec.inf\r
115	\r
116	\r
117	[FV.FvMain]\r
118	BlockSize = 0x40\r
119	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
120	FvAlignment = 8 # FV alignment and FV attributes setting.\r
121	ERASE_POLARITY = 1\r
122	MEMORY_MAPPED = TRUE\r
123	STICKY_WRITE = TRUE\r
124	LOCK_CAP = TRUE\r
125	LOCK_STATUS = TRUE\r
126	WRITE_DISABLED_CAP = TRUE\r
127	WRITE_ENABLED_CAP = TRUE\r
128	WRITE_STATUS = TRUE\r
129	WRITE_LOCK_CAP = TRUE\r
130	WRITE_LOCK_STATUS = TRUE\r
131	READ_DISABLED_CAP = TRUE\r
132	READ_ENABLED_CAP = TRUE\r
133	READ_STATUS = TRUE\r
134	READ_LOCK_CAP = TRUE\r
135	READ_LOCK_STATUS = TRUE\r
e6c51eaf	136	FvNameGuid = 8fa66cd0-f773-4f26-8f9f-5e54d0804c68\r
1e57a462	137	\r
3402aac7	138	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
1e57a462	139	\r
1e57a462	140	#\r
3402aac7	141	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
1e57a462	142	#\r
	143	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
	144	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
	145	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
	146	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
	147	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
	148	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
	149	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
	150	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
	151	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
	152	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
	153	\r
	154	# Simple TextIn/TextOut for UEFI Terminal\r
	155	INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf\r
3402aac7	156	\r
1e57a462	157	#\r
	158	# Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
	159	#\r
	160	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
3402aac7	161	\r
1e57a462	162	#\r
	163	# FAT filesystem + GPT/MBR partitioning\r
	164	#\r
	165	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	166	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
67fb865c	167	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
1e57a462	168	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
3402aac7 RC	169	\r
	170	#\r
	171	# UEFI application (Shell Embedded Boot Loader)\r
1e57a462	172	#\r
1e57a462	173	INF EmbeddedPkg/Ebl/Ebl.inf\r
3402aac7	174	\r
1e57a462	175	#\r
	176	# Bds\r
	177	#\r
	178	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	179	INF ArmPlatformPkg/Bds/Bds.inf\r
	180	\r
0ead5ec4 RC	181	# Legacy Linux Loader\r
0ead5ec4 RC	182	INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
1e57a462	183	\r
	184	[FV.FVMAIN_COMPACT]\r
	185	FvAlignment = 8\r
	186	ERASE_POLARITY = 1\r
	187	MEMORY_MAPPED = TRUE\r
	188	STICKY_WRITE = TRUE\r
	189	LOCK_CAP = TRUE\r
	190	LOCK_STATUS = TRUE\r
	191	WRITE_DISABLED_CAP = TRUE\r
	192	WRITE_ENABLED_CAP = TRUE\r
	193	WRITE_STATUS = TRUE\r
	194	WRITE_LOCK_CAP = TRUE\r
	195	WRITE_LOCK_STATUS = TRUE\r
	196	READ_DISABLED_CAP = TRUE\r
	197	READ_ENABLED_CAP = TRUE\r
	198	READ_STATUS = TRUE\r
	199	READ_LOCK_CAP = TRUE\r
	200	READ_LOCK_STATUS = TRUE\r
	201	\r
	202	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
	203	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
	204	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
	205	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
	206	INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
	207	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
	208	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
	209	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
	210	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
3402aac7	211	\r
1e57a462	212	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	213	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	214	SECTION FV_IMAGE = FVMAIN\r
	215	}\r
	216	}\r
	217	\r
	218	\r
	219	################################################################################\r
	220	#\r
	221	# Rules are use with the [FV] section's module INF type to define\r
	222	# how an FFS file is created for a given INF file. The following Rule are the default\r
	223	# rules for the different module type. User can add the customized rules to define the\r
	224	# content of the FFS file.\r
	225	#\r
	226	################################################################################\r
	227	\r
	228	\r
	229	############################################################################\r
3402aac7	230	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
1e57a462	231	############################################################################\r
	232	#\r
	233	#[Rule.Common.DXE_DRIVER]\r
	234	# FILE DRIVER = $(NAMED_GUID) {\r
	235	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	236	# COMPRESS PI_STD {\r
	237	# GUIDED {\r
	238	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	239	# UI STRING="$(MODULE_NAME)" Optional\r
	240	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	241	# }\r
	242	# }\r
	243	# }\r
	244	#\r
	245	############################################################################\r
	246	\r
6d0ca257	247	[Rule.ARM.SEC]\r
1e57a462	248	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
	249	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	250	}\r
	251	\r
6d0ca257 OM	252	# The AArch64 Vector Table requires a 2K alignment that is not supported by the FDF specification.\r
	253	# It is the reason 4K is used instead of 2K for the module alignment.\r
	254	[Rule.AARCH64.SEC]\r
	255	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
	256	TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	257	}\r
	258	\r
1e57a462	259	[Rule.Common.PEI_CORE]\r
	260	FILE PEI_CORE = $(NAMED_GUID) {\r
	261	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
febad023	262	UI STRING ="$(MODULE_NAME)" Optional\r
1e57a462	263	}\r
	264	\r
	265	[Rule.Common.PEIM]\r
	266	FILE PEIM = $(NAMED_GUID) {\r
	267	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	268	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
febad023	269	UI STRING="$(MODULE_NAME)" Optional\r
1e57a462	270	}\r
	271	\r
	272	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
	273	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
	274	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	275	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
	276	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	277	UI STRING="$(MODULE_NAME)" Optional\r
	278	}\r
	279	}\r
	280	\r
	281	[Rule.Common.DXE_CORE]\r
	282	FILE DXE_CORE = $(NAMED_GUID) {\r
	283	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	284	UI STRING="$(MODULE_NAME)" Optional\r
	285	}\r
	286	\r
	287	[Rule.Common.UEFI_DRIVER]\r
	288	FILE DRIVER = $(NAMED_GUID) {\r
	289	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	290	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	291	UI STRING="$(MODULE_NAME)" Optional\r
	292	}\r
	293	\r
67fb865c	294	[Rule.Common.UEFI_DRIVER.BINARY]\r
	295	FILE DRIVER = $(NAMED_GUID) {\r
	296	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	297	PE32 PE32 \|.efi\r
	298	UI STRING="$(MODULE_NAME)" Optional\r
	299	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	300	}\r
	301	\r
1e57a462	302	[Rule.Common.DXE_DRIVER]\r
	303	FILE DRIVER = $(NAMED_GUID) {\r
	304	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	305	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	306	UI STRING="$(MODULE_NAME)" Optional\r
	307	}\r
	308	\r
	309	[Rule.Common.DXE_RUNTIME_DRIVER]\r
	310	FILE DRIVER = $(NAMED_GUID) {\r
	311	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	312	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	313	UI STRING="$(MODULE_NAME)" Optional\r
	314	}\r
	315	\r
	316	[Rule.Common.UEFI_APPLICATION]\r
	317	FILE APPLICATION = $(NAMED_GUID) {\r
3402aac7	318	UI STRING ="$(MODULE_NAME)" Optional\r
1e57a462	319	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
1e57a462	320	}\r