[mirror_edk2.git] / ArmPlatformPkg / ArmPlatformPkg.fdf

#
#  Copyright (c) 2011, ARM Limited. All rights reserved.
#  
#  This program and the accompanying materials                          
#  are licensed and made available under the terms and conditions of the BSD License         
#  which accompanies this distribution.  The full text of the license may be found at        
#  http://opensource.org/licenses/bsd-license.php                                            
#
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################

[FD.Sec_ArmPlatform_EFI]
BaseAddress   = 0xEC000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
Size          = 0x00010000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
ErasePolarity = 1
BlockSize     = 0x00001000
NumBlocks     = 0x10

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00010000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC


[FD.ArmPlatform_EFI]
BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
ErasePolarity = 1

# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize     = 0x00001000
NumBlocks     = 0x200

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00200000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT


################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.FVMAIN_SEC]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/Sec/Sec.inf


[FV.FvMain]
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 8         # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF MdeModulePkg/Core/Dxe/DxeMain.inf 

  #
  # PI DXE Drivers producing Architectural Protocols (EFI Services) 
  #
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

  # Simple TextIn/TextOut for UEFI Terminal
  INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
  
  #
  # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
  #
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
  
  #
  # FAT filesystem + GPT/MBR partitioning
  #
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
  INF FatPkg/EnhancedFatDxe/Fat.inf
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
  
  #
  # UEFI application (Shell Embedded Boot Loader) 
  #  
  INF EmbeddedPkg/Ebl/Ebl.inf
    
  #
  # Bds
  #
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
  INF ArmPlatformPkg/Bds/Bds.inf


[FV.FVMAIN_COMPACT]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
  INF MdeModulePkg/Core/Pei/PeiMain.inf
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
  
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }


################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################


############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # 
############################################################################
#
#[Rule.Common.DXE_DRIVER]
#  FILE DRIVER = $(NAMED_GUID) {
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
#    COMPRESS PI_STD {
#      GUIDED {
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
#        UI       STRING="$(MODULE_NAME)" Optional
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
#      }
#    }
#  }
#
############################################################################

[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI     STRING ="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI       STRING="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM.TIANOCOMPRESSED]
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
      UI        STRING="$(MODULE_NAME)" Optional
    }
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI       STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    UI     STRING ="$(MODULE_NAME)" Optional         
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
  }
Commit	Line	Data
12fcdcb8	1	#
	2	# Copyright (c) 2011, ARM Limited. All rights reserved.
	3	#
	4	# This program and the accompanying materials
	5	# are licensed and made available under the terms and conditions of the BSD License
	6	# which accompanies this distribution. The full text of the license may be found at
	7	# http://opensource.org/licenses/bsd-license.php
	8	#
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
	11	#
	12
	13	################################################################################
	14	#
	15	# FD Section
	16	# The [FD] Section is made up of the definition statements and a
	17	# description of what goes into the Flash Device Image. Each FD section
	18	# defines one flash "device" image. A flash device image may be one of
	19	# the following: Removable media bootable image (like a boot floppy
	20	# image,) an Option ROM image (that would be "flashed" into an add-in
	21	# card,) a System "Flash" image (that would be burned into a system's
	22	# flash) or an Update ("Capsule") image that will be used to update and
	23	# existing system flash.
	24	#
	25	################################################################################
	26
	27	[FD.Sec_ArmPlatform_EFI]
	28	BaseAddress = 0xEC000000\|gArmTokenSpaceGuid.PcdSecureFdBaseAddress #The base address of the Secure FLASH Device.
	29	Size = 0x00010000\|gArmTokenSpaceGuid.PcdSecureFdSize #The size in bytes of the Secure FLASH Device
	30	ErasePolarity = 1
	31	BlockSize = 0x00001000
	32	NumBlocks = 0x10
	33
	34	################################################################################
	35	#
	36	# Following are lists of FD Region layout which correspond to the locations of different
	37	# images within the flash device.
	38	#
	39	# Regions must be defined in ascending order and may not overlap.
	40	#
	41	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
	42	# the pipe "\|" character, followed by the size of the region, also in hex with the leading
	43	# "0x" characters. Like:
	44	# Offset\|Size
	45	# PcdOffsetCName\|PcdSizeCName
	46	# RegionType <FV, DATA, or FILE>
	47	#
	48	################################################################################
	49
	50	0x00000000\|0x00010000
504d1460	51	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize
12fcdcb8	52	FV = FVMAIN_SEC
	53
	54
504d1460	55	[FD.ArmPlatform_EFI]
12fcdcb8	56	BaseAddress = 0xEC200000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
	57	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
	58	ErasePolarity = 1
	59
	60	# This one is tricky, it must be: BlockSize * NumBlocks = Size
	61	BlockSize = 0x00001000
	62	NumBlocks = 0x200
	63
	64	################################################################################
	65	#
	66	# Following are lists of FD Region layout which correspond to the locations of different
	67	# images within the flash device.
	68	#
	69	# Regions must be defined in ascending order and may not overlap.
	70	#
	71	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
	72	# the pipe "\|" character, followed by the size of the region, also in hex with the leading
	73	# "0x" characters. Like:
	74	# Offset\|Size
	75	# PcdOffsetCName\|PcdSizeCName
	76	# RegionType <FV, DATA, or FILE>
	77	#
	78	################################################################################
	79
	80	0x00000000\|0x00200000
504d1460	81	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize
12fcdcb8	82	FV = FVMAIN_COMPACT
	83
	84
	85	################################################################################
	86	#
	87	# FV Section
	88	#
	89	# [FV] section is used to define what components or modules are placed within a flash
	90	# device file. This section also defines order the components and modules are positioned
	91	# within the image. The [FV] section consists of define statements, set statements and
	92	# module statements.
	93	#
	94	################################################################################
	95
	96	[FV.FVMAIN_SEC]
	97	FvAlignment = 8
	98	ERASE_POLARITY = 1
	99	MEMORY_MAPPED = TRUE
	100	STICKY_WRITE = TRUE
	101	LOCK_CAP = TRUE
	102	LOCK_STATUS = TRUE
	103	WRITE_DISABLED_CAP = TRUE
	104	WRITE_ENABLED_CAP = TRUE
	105	WRITE_STATUS = TRUE
	106	WRITE_LOCK_CAP = TRUE
	107	WRITE_LOCK_STATUS = TRUE
	108	READ_DISABLED_CAP = TRUE
	109	READ_ENABLED_CAP = TRUE
	110	READ_STATUS = TRUE
	111	READ_LOCK_CAP = TRUE
	112	READ_LOCK_STATUS = TRUE
	113
	114	INF ArmPlatformPkg/Sec/Sec.inf
	115
	116
	117	[FV.FvMain]
	118	BlockSize = 0x40
	119	NumBlocks = 0 # This FV gets compressed so make it just big enough
	120	FvAlignment = 8 # FV alignment and FV attributes setting.
	121	ERASE_POLARITY = 1
	122	MEMORY_MAPPED = TRUE
	123	STICKY_WRITE = TRUE
	124	LOCK_CAP = TRUE
	125	LOCK_STATUS = TRUE
	126	WRITE_DISABLED_CAP = TRUE
	127	WRITE_ENABLED_CAP = TRUE
	128	WRITE_STATUS = TRUE
	129	WRITE_LOCK_CAP = TRUE
	130	WRITE_LOCK_STATUS = TRUE
	131	READ_DISABLED_CAP = TRUE
	132	READ_ENABLED_CAP = TRUE
	133	READ_STATUS = TRUE
	134	READ_LOCK_CAP = TRUE
	135	READ_LOCK_STATUS = TRUE
	136
	137	INF MdeModulePkg/Core/Dxe/DxeMain.inf
	138
	139	#
	140	# PI DXE Drivers producing Architectural Protocols (EFI Services)
	141	#
	142	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
	143	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
	144	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
504d1460	145	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
12fcdcb8	146	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
504d1460	147	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
12fcdcb8	148	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
	149	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
	150	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
	151	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
	152
504d1460	153	# Simple TextIn/TextOut for UEFI Terminal
	154	INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
	155
12fcdcb8	156	#
	157	# Semi-hosting filesystem (Required the Hardware Debugger to be connected)
	158	#
	159	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
	160
	161	#
	162	# FAT filesystem + GPT/MBR partitioning
	163	#
	164	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
	165	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
	166	INF FatPkg/EnhancedFatDxe/Fat.inf
	167	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
	168
	169	#
	170	# UEFI application (Shell Embedded Boot Loader)
	171	#
	172	INF EmbeddedPkg/Ebl/Ebl.inf
	173
	174	#
	175	# Bds
	176	#
	177	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
	178	INF ArmPlatformPkg/Bds/Bds.inf
	179
	180
	181	[FV.FVMAIN_COMPACT]
	182	FvAlignment = 8
	183	ERASE_POLARITY = 1
	184	MEMORY_MAPPED = TRUE
	185	STICKY_WRITE = TRUE
	186	LOCK_CAP = TRUE
	187	LOCK_STATUS = TRUE
	188	WRITE_DISABLED_CAP = TRUE
	189	WRITE_ENABLED_CAP = TRUE
	190	WRITE_STATUS = TRUE
	191	WRITE_LOCK_CAP = TRUE
	192	WRITE_LOCK_STATUS = TRUE
	193	READ_DISABLED_CAP = TRUE
	194	READ_ENABLED_CAP = TRUE
	195	READ_STATUS = TRUE
	196	READ_LOCK_CAP = TRUE
	197	READ_LOCK_STATUS = TRUE
	198
	199	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
	200	INF MdeModulePkg/Core/Pei/PeiMain.inf
	201	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
	202	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
	203	INF ArmPkg/Drivers/CpuPei/CpuPei.inf
	204	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
	205	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
	206	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
	207	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
	208
	209	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
	210	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
	211	SECTION FV_IMAGE = FVMAIN
	212	}
	213	}
	214
	215
	216	################################################################################
	217	#
	218	# Rules are use with the [FV] section's module INF type to define
	219	# how an FFS file is created for a given INF file. The following Rule are the default
220	# rules for the different module type. User can add the customized rules to define the
221	# content of the FFS file.
222	#
223	################################################################################
224
225
226	############################################################################
227	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
228	############################################################################
229	#
230	#[Rule.Common.DXE_DRIVER]
231	# FILE DRIVER = $(NAMED_GUID) {
232	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
233	# COMPRESS PI_STD {
234	# GUIDED {
235	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
236	# UI STRING="$(MODULE_NAME)" Optional
237	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
238	# }
239	# }
240	# }
241	#
242	############################################################################
243
244	[Rule.Common.SEC]
245	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
246	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
247	}
248
249	[Rule.Common.PEI_CORE]
250	FILE PEI_CORE = $(NAMED_GUID) {
251	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
252	UI STRING ="$(MODULE_NAME)" Optional
253	}
254
255	[Rule.Common.PEIM]
256	FILE PEIM = $(NAMED_GUID) {
257	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
258	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
259	UI STRING="$(MODULE_NAME)" Optional
260	}
261
262	[Rule.Common.PEIM.TIANOCOMPRESSED]
263	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
264	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
265	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
266	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
267	UI STRING="$(MODULE_NAME)" Optional
268	}
269	}
270
271	[Rule.Common.DXE_CORE]
272	FILE DXE_CORE = $(NAMED_GUID) {
273	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
274	UI STRING="$(MODULE_NAME)" Optional
275	}
276
277	[Rule.Common.UEFI_DRIVER]
278	FILE DRIVER = $(NAMED_GUID) {
279	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
280	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
281	UI STRING="$(MODULE_NAME)" Optional
282	}
283
284	[Rule.Common.DXE_DRIVER]
285	FILE DRIVER = $(NAMED_GUID) {
286	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
287	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
288	UI STRING="$(MODULE_NAME)" Optional
289	}
290
291	[Rule.Common.DXE_RUNTIME_DRIVER]
292	FILE DRIVER = $(NAMED_GUID) {
293	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
294	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
295	UI STRING="$(MODULE_NAME)" Optional
296	}
297
298	[Rule.Common.UEFI_APPLICATION]
299	FILE APPLICATION = $(NAMED_GUID) {
300	UI STRING ="$(MODULE_NAME)" Optional
301	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
302	}