[mirror_edk2.git] / ArmPlatformPkg / ArmRealViewEbPkg / ArmRealViewEb-RTSM-MPCore.fdf

# FLASH layout file for ARM VE.
#
#  Copyright (c) 2011, ARM Limited. All rights reserved.
#  
#  This program and the accompanying materials                          
#  are licensed and made available under the terms and conditions of the BSD License         
#  which accompanies this distribution.  The full text of the license may be found at        
#  http://opensource.org/licenses/bsd-license.php                                            
#
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################


[FD.ArmRealViewEb_EFI]
BaseAddress   = 0x40000000|gArmTokenSpaceGuid.PcdFdBaseAddress
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
ErasePolarity = 1
BlockSize     = 0x00010000
NumBlocks     = 0x20

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00050000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvBaseSize
FV = FVMAIN_SEC

0x00050000|0x00100000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.FVMAIN_SEC]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/Sec/Sec.inf


[FV.FvMain]
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 8         # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF MdeModulePkg/Core/Dxe/DxeMain.inf 

  #
  # PI DXE Drivers producing Architectural Protocols (EFI Services) 
  #
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf

  #
  # Multiple Console IO support
  #
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf
  
  INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
  INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
  
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf

  #
  # Semi-hosting filesystem
  #
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
  
  #
  # FAT filesystem + GPT/MBR partitioning
  #
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
  INF FatPkg/EnhancedFatDxe/Fat.inf
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

  #
  # UEFI application (Shell Embedded Boot Loader) 
  #  
  INF EmbeddedPkg/Ebl/Ebl.inf
  

  #
  # Bds
  #
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
  INF ArmPlatformPkg/Bds/Bds.inf


[FV.FVMAIN_COMPACT]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

!if $(EDK2_SKIP_PEICORE) == 1
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf
!else
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
  INF MdeModulePkg/Core/Pei/PeiMain.inf
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif

  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }

################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################


############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # 
############################################################################
#
#[Rule.Common.DXE_DRIVER]
#  FILE DRIVER = $(NAMED_GUID) {
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
#    COMPRESS PI_STD {
#      GUIDED {
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
#        UI       STRING="$(MODULE_NAME)" Optional
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
#      }
#    }
#  }
#
############################################################################

[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI     STRING ="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI       STRING="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM.TIANOCOMPRESSED]
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
      UI        STRING="$(MODULE_NAME)" Optional
    }
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI       STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    UI     STRING ="$(MODULE_NAME)" Optional         
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
  }
Commit	Line	Data
1d5d0ae9	1	# FLASH layout file for ARM VE.
	2	#
	3	# Copyright (c) 2011, ARM Limited. All rights reserved.
	4	#
	5	# This program and the accompanying materials
	6	# are licensed and made available under the terms and conditions of the BSD License
	7	# which accompanies this distribution. The full text of the license may be found at
	8	# http://opensource.org/licenses/bsd-license.php
	9	#
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
	12	#
	13
	14	################################################################################
	15	#
	16	# FD Section
	17	# The [FD] Section is made up of the definition statements and a
	18	# description of what goes into the Flash Device Image. Each FD section
	19	# defines one flash "device" image. A flash device image may be one of
	20	# the following: Removable media bootable image (like a boot floppy
	21	# image,) an Option ROM image (that would be "flashed" into an add-in
	22	# card,) a System "Flash" image (that would be burned into a system's
	23	# flash) or an Update ("Capsule") image that will be used to update and
	24	# existing system flash.
	25	#
	26	################################################################################
	27
	28
	29	[FD.ArmRealViewEb_EFI]
f92b93c9	30	BaseAddress = 0x40000000\|gArmTokenSpaceGuid.PcdFdBaseAddress
f92b93c9	31	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize
1d5d0ae9	32	ErasePolarity = 1
	33	BlockSize = 0x00010000
	34	NumBlocks = 0x20
	35
	36	################################################################################
	37	#
	38	# Following are lists of FD Region layout which correspond to the locations of different
	39	# images within the flash device.
	40	#
	41	# Regions must be defined in ascending order and may not overlap.
	42	#
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading
	45	# "0x" characters. Like:
	46	# Offset\|Size
	47	# PcdOffsetCName\|PcdSizeCName
	48	# RegionType <FV, DATA, or FILE>
	49	#
	50	################################################################################
	51
	52	0x00000000\|0x00050000
1ad14bc8	53	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvBaseSize
1d5d0ae9	54	FV = FVMAIN_SEC
	55
	56	0x00050000\|0x00100000
f92b93c9	57	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize
1d5d0ae9	58	FV = FVMAIN_COMPACT
1d5d0ae9	59
1d5d0ae9	60	################################################################################
	61	#
	62	# FV Section
	63	#
	64	# [FV] section is used to define what components or modules are placed within a flash
	65	# device file. This section also defines order the components and modules are positioned
	66	# within the image. The [FV] section consists of define statements, set statements and
	67	# module statements.
	68	#
	69	################################################################################
	70
	71	[FV.FVMAIN_SEC]
	72	FvAlignment = 8
	73	ERASE_POLARITY = 1
	74	MEMORY_MAPPED = TRUE
	75	STICKY_WRITE = TRUE
	76	LOCK_CAP = TRUE
	77	LOCK_STATUS = TRUE
	78	WRITE_DISABLED_CAP = TRUE
	79	WRITE_ENABLED_CAP = TRUE
	80	WRITE_STATUS = TRUE
	81	WRITE_LOCK_CAP = TRUE
	82	WRITE_LOCK_STATUS = TRUE
	83	READ_DISABLED_CAP = TRUE
	84	READ_ENABLED_CAP = TRUE
	85	READ_STATUS = TRUE
	86	READ_LOCK_CAP = TRUE
	87	READ_LOCK_STATUS = TRUE
	88
	89	INF ArmPlatformPkg/Sec/Sec.inf
	90
	91
	92	[FV.FvMain]
	93	BlockSize = 0x40
	94	NumBlocks = 0 # This FV gets compressed so make it just big enough
	95	FvAlignment = 8 # FV alignment and FV attributes setting.
	96	ERASE_POLARITY = 1
	97	MEMORY_MAPPED = TRUE
	98	STICKY_WRITE = TRUE
	99	LOCK_CAP = TRUE
	100	LOCK_STATUS = TRUE
	101	WRITE_DISABLED_CAP = TRUE
	102	WRITE_ENABLED_CAP = TRUE
	103	WRITE_STATUS = TRUE
	104	WRITE_LOCK_CAP = TRUE
	105	WRITE_LOCK_STATUS = TRUE
	106	READ_DISABLED_CAP = TRUE
	107	READ_ENABLED_CAP = TRUE
	108	READ_STATUS = TRUE
	109	READ_LOCK_CAP = TRUE
	110	READ_LOCK_STATUS = TRUE
	111
	112	INF MdeModulePkg/Core/Dxe/DxeMain.inf
	113
	114	#
	115	# PI DXE Drivers producing Architectural Protocols (EFI Services)
	116	#
	117	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
	118	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
	119	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
	120	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
	121	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
a89cb4b7	122	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
a89cb4b7	123	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
1d5d0ae9	124	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
	125	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
	126	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
	127	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
9bc6ef02	128
936eff09	129	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
9bc6ef02	130	INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
936eff09	131
	132	#
	133	# Multiple Console IO support
	134	#
	135	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
	136	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
	137	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
	138	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
	139	INF EmbeddedPkg/SerialDxe/SerialDxe.inf
1d5d0ae9	140
55fad965	141	INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
1d5d0ae9	142	INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
a89cb4b7	143
a89cb4b7	144	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
1d5d0ae9	145
	146	#
	147	# Semi-hosting filesystem
	148	#
	149	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
	150
	151	#
	152	# FAT filesystem + GPT/MBR partitioning
	153	#
	154	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
	155	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
	156	INF FatPkg/EnhancedFatDxe/Fat.inf
	157	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
	158
	159	#
	160	# UEFI application (Shell Embedded Boot Loader)
	161	#
	162	INF EmbeddedPkg/Ebl/Ebl.inf
	163
	164
	165	#
	166	# Bds
	167	#
	168	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
	169	INF ArmPlatformPkg/Bds/Bds.inf
	170
	171
	172	[FV.FVMAIN_COMPACT]
	173	FvAlignment = 8
	174	ERASE_POLARITY = 1
	175	MEMORY_MAPPED = TRUE
	176	STICKY_WRITE = TRUE
	177	LOCK_CAP = TRUE
	178	LOCK_STATUS = TRUE
	179	WRITE_DISABLED_CAP = TRUE
	180	WRITE_ENABLED_CAP = TRUE
	181	WRITE_STATUS = TRUE
	182	WRITE_LOCK_CAP = TRUE
	183	WRITE_LOCK_STATUS = TRUE
	184	READ_DISABLED_CAP = TRUE
	185	READ_ENABLED_CAP = TRUE
	186	READ_STATUS = TRUE
	187	READ_LOCK_CAP = TRUE
	188	READ_LOCK_STATUS = TRUE
	189
64e03133	190	!if $(EDK2_SKIP_PEICORE) == 1
	191	INF ArmPlatformPkg/PrePi/PeiMPCore.inf
	192	!else
1d5d0ae9	193	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
1d5d0ae9	194	INF MdeModulePkg/Core/Pei/PeiMain.inf
64e03133	195	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
64e03133	196	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
1d5d0ae9	197	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
	198	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
	199	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
	200	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
64e03133	201	!endif
64e03133	202
1d5d0ae9	203	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
	204	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
	205	SECTION FV_IMAGE = FVMAIN
	206	}
	207	}
	208
1d5d0ae9	209	################################################################################
	210	#
	211	# Rules are use with the [FV] section's module INF type to define
	212	# how an FFS file is created for a given INF file. The following Rule are the default
	213	# rules for the different module type. User can add the customized rules to define the
	214	# content of the FFS file.
	215	#
	216	################################################################################
	217
	218
	219	############################################################################
	220	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
	221	############################################################################
	222	#
	223	#[Rule.Common.DXE_DRIVER]
	224	# FILE DRIVER = $(NAMED_GUID) {
6740ea74	225	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
1d5d0ae9	226	# COMPRESS PI_STD {
1d5d0ae9	227	# GUIDED {
6740ea74	228	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	229	# UI STRING="$(MODULE_NAME)" Optional
	230	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
	231	# }
	232	# }
	233	# }
	234	#
	235	############################################################################
	236
	237	[Rule.Common.SEC]
	238	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
6740ea74	239	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	240	}
	241
	242	[Rule.Common.PEI_CORE]
	243	FILE PEI_CORE = $(NAMED_GUID) {
6740ea74	244	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	245	UI STRING ="$(MODULE_NAME)" Optional
	246	}
	247
	248	[Rule.Common.PEIM]
	249	FILE PEIM = $(NAMED_GUID) {
6740ea74	250	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
6740ea74	251	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	252	UI STRING="$(MODULE_NAME)" Optional
	253	}
	254
	255	[Rule.Common.PEIM.TIANOCOMPRESSED]
	256	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
6740ea74	257	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
1d5d0ae9	258	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
6740ea74	259	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	260	UI STRING="$(MODULE_NAME)" Optional
	261	}
	262	}
	263
	264	[Rule.Common.DXE_CORE]
	265	FILE DXE_CORE = $(NAMED_GUID) {
6740ea74	266	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	267	UI STRING="$(MODULE_NAME)" Optional
	268	}
	269
	270	[Rule.Common.UEFI_DRIVER]
	271	FILE DRIVER = $(NAMED_GUID) {
6740ea74	272	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
6740ea74	273	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	274	UI STRING="$(MODULE_NAME)" Optional
	275	}
	276
	277	[Rule.Common.DXE_DRIVER]
	278	FILE DRIVER = $(NAMED_GUID) {
6740ea74	279	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
6740ea74	280	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	281	UI STRING="$(MODULE_NAME)" Optional
	282	}
	283
	284	[Rule.Common.DXE_RUNTIME_DRIVER]
	285	FILE DRIVER = $(NAMED_GUID) {
6740ea74	286	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
6740ea74	287	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	288	UI STRING="$(MODULE_NAME)" Optional
	289	}
	290
	291	[Rule.Common.UEFI_APPLICATION]
	292	FILE APPLICATION = $(NAMED_GUID) {
	293	UI STRING ="$(MODULE_NAME)" Optional
6740ea74	294	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
1d5d0ae9	295	}