[mirror_edk2.git] / ArmPlatformPkg / ArmVExpressPkg / ArmVExpress-CTA9x4.fdf

# FLASH layout file for ARM VE.
#
#  Copyright (c) 2011, ARM Limited. All rights reserved.
#  
#  This program and the accompanying materials                          
#  are licensed and made available under the terms and conditions of the BSD License         
#  which accompanies this distribution.  The full text of the license may be found at        
#  http://opensource.org/licenses/bsd-license.php                                            
#
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################

[FD.Sec_ArmVExpress_EFI]
BaseAddress   = 0x44000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
Size          = 0x00200000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
ErasePolarity = 1
BlockSize     = 0x00001000
NumBlocks     = 0x200

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00200000
gEmbeddedTokenSpaceGuid.PcdFlashFvSecBase|gEmbeddedTokenSpaceGuid.PcdFlashFvSecSize
FV = FVMAIN_SEC


[FD.ArmVExpress_EFI]
!if $(EDK2_ARMVE_STANDALONE) == 1
BaseAddress   = 0x45000000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress  # The base address of the Firmware in NOR Flash.
!else
BaseAddress   = 0x80000000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress  # The base address of the Firmware in remapped DRAM.
!endif
Size          = 0x00200000|gArmTokenSpaceGuid.PcdNormalFdSize         # The size in bytes of the FLASH Device
ErasePolarity = 1

# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize     = 0x00001000
NumBlocks     = 0x200

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00200000
gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
FV = FVMAIN_COMPACT


################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.FVMAIN_SEC]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/Sec/Sec.inf


[FV.FvMain]
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 8         # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF MdeModulePkg/Core/Dxe/DxeMain.inf 

  #
  # PI DXE Drivers producing Architectural Protocols (EFI Services) 
  #
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
   
  INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf

  INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
  INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
  INF ArmPlatformPkg/ArmVExpressPkg/NorFlashDxe/NorFlashDxe.inf

  #
  # Semi-hosting filesystem
  #
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
  
  #
  # FAT filesystem + GPT/MBR partitioning
  #
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
  INF FatPkg/EnhancedFatDxe/Fat.inf
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

  #
  # Multimedia Card Interface
  #
  INF ArmPkg/Universal/MmcDxe/MmcDxe.inf
  INF ArmPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
  
  #
  # UEFI application (Shell Embedded Boot Loader) 
  #  
  INF EmbeddedPkg/Ebl/Ebl.inf
    
  #
  # Bds
  #
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
  INF ArmPlatformPkg/Bds/Bds.inf


[FV.FVMAIN_COMPACT]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
  INF MdeModulePkg/Core/Pei/PeiMain.inf
  INF ArmPlatformPkg/PlatformPei/PlatformPei.inf
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPei.inf
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
  
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }


################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################


############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # 
############################################################################
#
#[Rule.Common.DXE_DRIVER]
#  FILE DRIVER = $(NAMED_GUID) {
#    DXE_DEPEX    DXE_DEPEX Optional      |.depex
#    COMPRESS PI_STD {
#      GUIDED {
#        PE32     PE32                    |.efi
#        UI       STRING="$(MODULE_NAME)" Optional
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
#      }
#    }
#  }
#
############################################################################

[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    TE  TE    Align = 8      |.efi
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    TE     TE           |.efi
    UI     STRING ="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional        |.depex
     TE       TE                         |.efi
     UI       STRING="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM.TIANOCOMPRESSED]
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
    PEI_DEPEX PEI_DEPEX Optional         |.depex
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
      PE32      PE32                     |.efi
      UI        STRING="$(MODULE_NAME)" Optional
    }
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32     PE32           |.efi
    UI       STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    PE32         PE32                    |.efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    PE32         PE32                    |.efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX Optional      |.depex
    PE32         PE32                    |.efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    UI     STRING ="$(MODULE_NAME)" Optional         
    PE32   PE32                    |.efi
  }
Commit	Line	Data
1d5d0ae9	1	# FLASH layout file for ARM VE.
	2	#
	3	# Copyright (c) 2011, ARM Limited. All rights reserved.
	4	#
	5	# This program and the accompanying materials
	6	# are licensed and made available under the terms and conditions of the BSD License
	7	# which accompanies this distribution. The full text of the license may be found at
	8	# http://opensource.org/licenses/bsd-license.php
	9	#
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
	12	#
	13
	14	################################################################################
	15	#
	16	# FD Section
	17	# The [FD] Section is made up of the definition statements and a
	18	# description of what goes into the Flash Device Image. Each FD section
	19	# defines one flash "device" image. A flash device image may be one of
	20	# the following: Removable media bootable image (like a boot floppy
	21	# image,) an Option ROM image (that would be "flashed" into an add-in
	22	# card,) a System "Flash" image (that would be burned into a system's
	23	# flash) or an Update ("Capsule") image that will be used to update and
	24	# existing system flash.
	25	#
	26	################################################################################
	27
	28	[FD.Sec_ArmVExpress_EFI]
	29	BaseAddress = 0x44000000\|gArmTokenSpaceGuid.PcdSecureFdBaseAddress #The base address of the Secure FLASH Device.
	30	Size = 0x00200000\|gArmTokenSpaceGuid.PcdSecureFdSize #The size in bytes of the Secure FLASH Device
	31	ErasePolarity = 1
	32	BlockSize = 0x00001000
	33	NumBlocks = 0x200
	34
	35	################################################################################
	36	#
	37	# Following are lists of FD Region layout which correspond to the locations of different
	38	# images within the flash device.
	39	#
	40	# Regions must be defined in ascending order and may not overlap.
	41	#
	42	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
	43	# the pipe "\|" character, followed by the size of the region, also in hex with the leading
	44	# "0x" characters. Like:
	45	# Offset\|Size
	46	# PcdOffsetCName\|PcdSizeCName
	47	# RegionType <FV, DATA, or FILE>
	48	#
	49	################################################################################
	50
	51	0x00000000\|0x00200000
	52	gEmbeddedTokenSpaceGuid.PcdFlashFvSecBase\|gEmbeddedTokenSpaceGuid.PcdFlashFvSecSize
	53	FV = FVMAIN_SEC
	54
	55
	56	[FD.ArmVExpress_EFI]
	57	!if $(EDK2_ARMVE_STANDALONE) == 1
262a9b04	58	BaseAddress = 0x45000000\|gArmTokenSpaceGuid.PcdNormalFdBaseAddress # The base address of the Firmware in NOR Flash.
1d5d0ae9	59	!else
262a9b04	60	BaseAddress = 0x80000000\|gArmTokenSpaceGuid.PcdNormalFdBaseAddress # The base address of the Firmware in remapped DRAM.
1d5d0ae9	61	!endif
262a9b04	62	Size = 0x00200000\|gArmTokenSpaceGuid.PcdNormalFdSize # The size in bytes of the FLASH Device
1d5d0ae9	63	ErasePolarity = 1
	64
	65	# This one is tricky, it must be: BlockSize * NumBlocks = Size
	66	BlockSize = 0x00001000
	67	NumBlocks = 0x200
	68
	69	################################################################################
	70	#
	71	# Following are lists of FD Region layout which correspond to the locations of different
	72	# images within the flash device.
	73	#
	74	# Regions must be defined in ascending order and may not overlap.
	75	#
	76	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
	77	# the pipe "\|" character, followed by the size of the region, also in hex with the leading
	78	# "0x" characters. Like:
	79	# Offset\|Size
	80	# PcdOffsetCName\|PcdSizeCName
	81	# RegionType <FV, DATA, or FILE>
	82	#
	83	################################################################################
	84
	85	0x00000000\|0x00200000
	86	gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase\|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
	87	FV = FVMAIN_COMPACT
	88
	89
1d5d0ae9	90	################################################################################
	91	#
	92	# FV Section
	93	#
	94	# [FV] section is used to define what components or modules are placed within a flash
	95	# device file. This section also defines order the components and modules are positioned
	96	# within the image. The [FV] section consists of define statements, set statements and
	97	# module statements.
	98	#
	99	################################################################################
	100
	101	[FV.FVMAIN_SEC]
	102	FvAlignment = 8
	103	ERASE_POLARITY = 1
	104	MEMORY_MAPPED = TRUE
	105	STICKY_WRITE = TRUE
	106	LOCK_CAP = TRUE
	107	LOCK_STATUS = TRUE
	108	WRITE_DISABLED_CAP = TRUE
	109	WRITE_ENABLED_CAP = TRUE
	110	WRITE_STATUS = TRUE
	111	WRITE_LOCK_CAP = TRUE
	112	WRITE_LOCK_STATUS = TRUE
	113	READ_DISABLED_CAP = TRUE
	114	READ_ENABLED_CAP = TRUE
	115	READ_STATUS = TRUE
	116	READ_LOCK_CAP = TRUE
	117	READ_LOCK_STATUS = TRUE
	118
	119	INF ArmPlatformPkg/Sec/Sec.inf
	120
	121
	122	[FV.FvMain]
	123	BlockSize = 0x40
	124	NumBlocks = 0 # This FV gets compressed so make it just big enough
	125	FvAlignment = 8 # FV alignment and FV attributes setting.
	126	ERASE_POLARITY = 1
	127	MEMORY_MAPPED = TRUE
	128	STICKY_WRITE = TRUE
	129	LOCK_CAP = TRUE
	130	LOCK_STATUS = TRUE
	131	WRITE_DISABLED_CAP = TRUE
	132	WRITE_ENABLED_CAP = TRUE
	133	WRITE_STATUS = TRUE
	134	WRITE_LOCK_CAP = TRUE
	135	WRITE_LOCK_STATUS = TRUE
	136	READ_DISABLED_CAP = TRUE
	137	READ_ENABLED_CAP = TRUE
	138	READ_STATUS = TRUE
	139	READ_LOCK_CAP = TRUE
	140	READ_LOCK_STATUS = TRUE
	141
	142	INF MdeModulePkg/Core/Dxe/DxeMain.inf
	143
	144	#
	145	# PI DXE Drivers producing Architectural Protocols (EFI Services)
	146	#
	147	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
	148	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
	149	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
	150	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
	151	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
	152	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
	153	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
154	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
155	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
156	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
157	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
158
159	INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
160
161	INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
162	INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
163	INF ArmPlatformPkg/ArmVExpressPkg/NorFlashDxe/NorFlashDxe.inf
164
165	#
166	# Semi-hosting filesystem
167	#
168	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
169
170	#
171	# FAT filesystem + GPT/MBR partitioning
172	#
173	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
174	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
175	INF FatPkg/EnhancedFatDxe/Fat.inf
176	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
177
178	#
179	# Multimedia Card Interface
180	#
181	INF ArmPkg/Universal/MmcDxe/MmcDxe.inf
182	INF ArmPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
183
184	#
185	# UEFI application (Shell Embedded Boot Loader)
186	#
187	INF EmbeddedPkg/Ebl/Ebl.inf
188
189	#
190	# Bds
191	#
192	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
193	INF ArmPlatformPkg/Bds/Bds.inf
194
195
196	[FV.FVMAIN_COMPACT]
197	FvAlignment = 8
198	ERASE_POLARITY = 1
199	MEMORY_MAPPED = TRUE
200	STICKY_WRITE = TRUE
201	LOCK_CAP = TRUE
202	LOCK_STATUS = TRUE
203	WRITE_DISABLED_CAP = TRUE
204	WRITE_ENABLED_CAP = TRUE
205	WRITE_STATUS = TRUE
206	WRITE_LOCK_CAP = TRUE
207	WRITE_LOCK_STATUS = TRUE
208	READ_DISABLED_CAP = TRUE
209	READ_ENABLED_CAP = TRUE
210	READ_STATUS = TRUE
211	READ_LOCK_CAP = TRUE
212	READ_LOCK_STATUS = TRUE
213
214	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
215	INF MdeModulePkg/Core/Pei/PeiMain.inf
216	INF ArmPlatformPkg/PlatformPei/PlatformPei.inf
217	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPei.inf
218	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
219	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
220	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
221	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
222
223	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
224	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
225	SECTION FV_IMAGE = FVMAIN
226	}
227	}
228
229
230	################################################################################
231	#
232	# Rules are use with the [FV] section's module INF type to define
233	# how an FFS file is created for a given INF file. The following Rule are the default
234	# rules for the different module type. User can add the customized rules to define the
235	# content of the FFS file.
236	#
237	################################################################################
238
239
240	############################################################################
241	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
242	############################################################################
243	#
244	#[Rule.Common.DXE_DRIVER]
245	# FILE DRIVER = $(NAMED_GUID) {
246	# DXE_DEPEX DXE_DEPEX Optional \|.depex
247	# COMPRESS PI_STD {
248	# GUIDED {
249	# PE32 PE32 \|.efi
250	# UI STRING="$(MODULE_NAME)" Optional
251	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
252	# }
253	# }
254	# }
255	#
256	############################################################################
257
258	[Rule.Common.SEC]
259	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
260	TE TE Align = 8 \|.efi
261	}
262
263	[Rule.Common.PEI_CORE]
264	FILE PEI_CORE = $(NAMED_GUID) {
265	TE TE \|.efi
266	UI STRING ="$(MODULE_NAME)" Optional
267	}
268
269	[Rule.Common.PEIM]
270	FILE PEIM = $(NAMED_GUID) {
271	PEI_DEPEX PEI_DEPEX Optional \|.depex
272	TE TE \|.efi
273	UI STRING="$(MODULE_NAME)" Optional
274	}
275
276	[Rule.Common.PEIM.TIANOCOMPRESSED]
277	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
278	PEI_DEPEX PEI_DEPEX Optional \|.depex
279	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
280	PE32 PE32 \|.efi
281	UI STRING="$(MODULE_NAME)" Optional
282	}
283	}
284
285	[Rule.Common.DXE_CORE]
286	FILE DXE_CORE = $(NAMED_GUID) {
287	PE32 PE32 \|.efi
288	UI STRING="$(MODULE_NAME)" Optional
289	}
290
291	[Rule.Common.UEFI_DRIVER]
292	FILE DRIVER = $(NAMED_GUID) {
293	DXE_DEPEX DXE_DEPEX Optional \|.depex
294	PE32 PE32 \|.efi
295	UI STRING="$(MODULE_NAME)" Optional
296	}
297
298	[Rule.Common.DXE_DRIVER]
299	FILE DRIVER = $(NAMED_GUID) {
300	DXE_DEPEX DXE_DEPEX Optional \|.depex
301	PE32 PE32 \|.efi
302	UI STRING="$(MODULE_NAME)" Optional
303	}
304
305	[Rule.Common.DXE_RUNTIME_DRIVER]
306	FILE DRIVER = $(NAMED_GUID) {
307	DXE_DEPEX DXE_DEPEX Optional \|.depex
308	PE32 PE32 \|.efi
309	UI STRING="$(MODULE_NAME)" Optional
310	}
311
312	[Rule.Common.UEFI_APPLICATION]
313	FILE APPLICATION = $(NAMED_GUID) {
314	UI STRING ="$(MODULE_NAME)" Optional
315	PE32 PE32 \|.efi
316	}