OvmfPkg XenConsoleSerialPortLib: Implement Get(Set)Control/SetAttributes

[mirror_edk2.git] / ArmVirtPkg / ArmVirtQemu.fdf

#\r
#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
#  Copyright (c) 2014, Linaro Limited. All rights reserved.\r
#  Copyright (c) 2015, Intel Corporation. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.QEMU_EFI]\r
BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x200\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
#\r
# UEFI has trouble dealing with FVs that reside at physical address 0x0.\r
# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the\r
# real FV at offset 0x1000\r
#\r
0x00000000|0x00001000\r
DATA = {\r
!if $(ARCH) == AARCH64\r
  0x00, 0x04, 0x00, 0x14   # 'b 0x1000' in AArch64 ASM\r
!else\r
  0xfe, 0x03, 0x00, 0xea   # 'b 0x1000' in AArch32 ASM\r
!endif\r
}\r
\r
0x00001000|0x001ff000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 16        # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  APRIORI DXE {\r
    INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
    INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf\r
  }\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
  INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
  INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
!if $(SECURE_BOOT_ENABLE) == TRUE\r
  INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf\r
!endif\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
!if $(SECURE_BOOT_ENABLE) == TRUE\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashAuthenticatedDxe.inf\r
!else\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
!endif\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # Platform Driver\r
  #\r
  INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf\r
  INF OvmfPkg/VirtioNetDxe/VirtioNet.inf\r
  INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF ShellPkg/Application/Shell/Shell.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
  INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
\r
  #\r
  # Networking stack\r
  #\r
  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
\r
  #\r
  # SCSI Bus and Disk Driver\r
  #\r
  INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
  INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
\r
  #\r
  # SMBIOS Support\r
  #\r
  INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
  INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf\r
\r
  #\r
  # ACPI Support\r
  #\r
  INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
  INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf\r
\r
  #\r
  # PCI support\r
  #\r
  INF ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf\r
  INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
  INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf\r
\r
  #\r
  # Video support\r
  #\r
  INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf\r
  INF OvmfPkg/PlatformDxe/Platform.inf\r
\r
  #\r
  # USB Support\r
  #\r
  INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf\r
  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
  INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
\r
  #\r
  # TianoCore logo (splash screen)\r
  #\r
  FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {\r
    SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
  }\r
\r
!if $(ARCH) == ARM\r
  INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf\r
  INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
!endif\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 16\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  APRIORI PEI {\r
    INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  }\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {\r
    TE  TE Align = Auto                 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) FIXED {\r
    TE     TE Align = Auto              $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) FIXED {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE Align = Auto           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)"     Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.USER_DEFINED.ACPITABLE]\r
  FILE FREEFORM = $(NAMED_GUID) {\r
    RAW       ACPI                    |.acpi\r
    RAW       ASL                     |.aml\r
    UI        STRING="$(MODULE_NAME)" Optional\r
  }\r