Sync EDKII BaseTools to BaseTools project r1988

[mirror_edk2.git] / BaseTools / Conf / build_rule.template

#\r
#  Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>\r
#  Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
#  Filename: build_rule.template\r
#\r
\r
## Syntax\r
#\r
# "*" is used to indicate that the source files will be processed at the same time.\r
# "?" is used to indicate that the source files will be processed one by one.\r
#\r
# "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>\r
#   <InputFile[.<ToolChainFamily>]> <EOL>\r
#       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]\r
#\r
#   <OutputFile[.<ToolChainFamily>]> <EOL>\r
#       <FileFullPath>\r
#\r
#   <ExtraDependency>\r
#       <FileFullPath>\r
#\r
#   <Command[.<ToolChainFamily>]> <EOL>\r
#       <Command1>\r
#       [<Command2>]\r
#\r
# <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.\r
# Missing <InputFile> will cause an exception and break build.\r
# Missing <Command> will cause that related build target won't be generated but\r
#   won't break build.\r
#\r
\r
## Placeholders for string substitution\r
#\r
#   ${src}      Source file(s) to be built (full path)\r
#   ${s_path}   Source file directory (absolute path)\r
#   ${s_dir}    Source file relative directory within a module\r
#               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)\r
#   ${s_name}   Source file name without path\r
#   ${s_base}   Source file name without extension and path\r
#   ${s_ext}    Source file extension\r
#\r
#   ${dst}      Destination file(s) built from ${src} (full path)\r
#   ${d_path}   Destination file directory (absolute path)\r
#   ${d_name}   Destination file name without path\r
#   ${d_base}   Destination file name without extension and path\r
#   ${d_ext}    Destination file extension\r
#\r
#   (+)         Directory separator\r
#\r
\r
## Macro\r
#   $(WORKSPACE)        Workspace directory\r
#   $(OUTPUT_DIR)       Directory for intermediate files for building a module\r
#   $(DEBUG_DIR)        Directory for files used to debug a module\r
#   $(BUILD_DIR)        All files for building a platform will be put in this directory\r
#   $(BIN_DIR)          Common directory for executable files\r
#   $(FV_DIR)           Directory to store flash image files\r
#   $(INC)              Search path of current module\r
#   $(INC_LIST)         A file containing search pathes of current module\r
#   $(LIBS)             Static library files of current module\r
#   $(<tool>_FLAGS)     Tools flags of current module\r
#   $(MODULE_NAME)      Current module name\r
#   $(MODULE_TYPE)      Current module type\r
#   $(MODULE_GUID)      Current module guid\r
#   $(ARCH)             Architecture of current module\r
#   $(TOOLCHAIN)        Toolchain used to build current module\r
#   $(TARGET)           Target of current module (DEBUG/RELEASE)\r
#   $(<tool>)           Path of tool\r
#   $(EDK_TOOLS_PATH)   Path of build tools\r
#   $(<FILE_TYPES>)     File list of each file type\r
#                       (Note: The macro name is derived from file type name. For example,\r
#                        C-Code-File will have C_CODE_FILES macro.)\r
#   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type\r
#                       (\r
#                        Note: The macro and file name are derived from file type name.\r
#                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing\r
#                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name\r
#                        will be generated only when this macro is used in command line.\r
#                        This is intended to get over the long command line limitation.\r
#                       )\r
#\r
#   $(CP)     copy command\r
#   $(MV)     move command\r
#   $(RM)     delete command\r
#   $(MD)     create dir command\r
#   $(RD)     remove dir command\r
#\r
\r
## Reserved File-Type\r
#\r
# Don't change following names of file types and their associated files,\r
# which are also used in tools' code\r
#\r
#   C-Code-File\r
#   C-Header-File\r
#   Dynamic-Library-File\r
#   Static-Library-File\r
#   Visual-Form-Representation-File\r
#   Unicode-Text-File\r
#\r
\r
[C-Code-File]\r
    <InputFile>\r
        ?.c\r
        ?.C\r
        ?.cc\r
        ?.CC\r
        ?.cpp\r
        ?.Cpp\r
        ?.CPP\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}\r
\r
    <Command.GCC, Command.RVCT>\r
        # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues\r
        "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}\r
        "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}\r
\r
    <Command.ARMGCC>\r
        "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}\r
\r
\r
[C-Header-File]\r
    <InputFile>\r
        *.h, *.H\r
\r
    <OutputFile>\r
\r
    <Command>\r
\r
\r
[Assembly-Code-File.COMMON.COMMON]\r
    <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>\r
        ?.asm, ?.Asm, ?.ASM\r
\r
    <InputFile.GCC>\r
        ?.S, ?.s\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
        Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
        "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii\r
\r
    <Command.GCC, Command.RVCT>\r
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
        Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
        # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues\r
        "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii\r
\r
[Assembly-Code-File.COMMON.IPF]\r
    <InputFile>\r
        ?.s\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
        Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
        # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues\r
        "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii\r
\r
[Visual-Form-Representation-File]\r
    <InputFile>\r
        ?.vfr\r
        ?.Vfr\r
        ?.VFR\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c\r
\r
    <Command>\r
        -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1\r
        "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        -$(MD) ${d_path} > NUL 2>&1\r
        "$(VFR)" $(VFR_FLAGS) --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
\r
[Object-File]\r
    <InputFile>\r
        *.obj\r
        *.o\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME).lib\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)\r
\r
    <Command.GCC>\r
        "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)\r
    \r
    <Command.RVCT>\r
        "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)\r
    \r
    <Command.RVCTCYGWIN, Command.ARMGCC>\r
        # $(OBJECT_FILES_LIST) has wrong paths for cygwin\r
        "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)\r
\r
    <Command.XCODE>\r
        "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)\r
\r
[Static-Library-File]\r
    <InputFile>\r
        *.lib\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)$(MODULE_NAME).dll\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)\r
\r
    <Command.GCC>\r
        "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)\r
        "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}\r
\r
    <Command.ARMGCC>\r
        "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -) $(DLINK2_FLAGS)\r
\r
    <Command.RVCT>\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
\r
    <Command.RVCTCYGWIN>\r
        #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)\r
\r
    <Command.XCODE>\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)\r
    \r
    \r
[Static-Library-File.USER_DEFINED]\r
    <InputFile>\r
        *.lib\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)$(MODULE_NAME)\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)\r
\r
    <Command.GCC>\r
        "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)\r
\r
    <Command.ARMGCC>\r
        "$(DLINK)" $(DLINK_FLAGS) -( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -) $(DLINK2_FLAGS)\r
\r
    <Command.RVCT>\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
\r
    <Command.RVCTCYGWIN>\r
        #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)\r
\r
    <Command.XCODE>\r
        "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)\r
      \r
      \r
[Dynamic-Library-File]\r
    <InputFile>\r
        ?.dll\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)$(MODULE_NAME).efi\r
\r
    <Command.MSFT, Command.INTEL, Command.RVCT, Command.ARMGCC>  \r
        GenFw -e $(MODULE_TYPE) -o ${dst} ${src}\r
        $(CP) ${dst} $(OUTPUT_DIR)\r
        $(CP) ${dst} $(BIN_DIR)\r
        -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
\r
    <Command.GCC>\r
        $(OBJCOPY) --only-keep-debug ${src} $(BIN_DIR)(+)$(MODULE_NAME).debug\r
        $(OBJCOPY) --strip-unneeded ${src}\r
        $(OBJCOPY) --add-gnu-debuglink=$(BIN_DIR)(+)$(MODULE_NAME).debug ${src}\r
        GenFw -e $(MODULE_TYPE) -o ${dst} ${src}\r
        $(CP) ${dst} $(OUTPUT_DIR)\r
        $(CP) ${dst} $(BIN_DIR)\r
        -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
        \r
    <Command.XCODE>\r
        # tool to convert Mach-O to PE/COFF\r
        "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff\r
        # create symbol file for GDB debug\r
        -$(DSYMUTIL) ${src}\r
        GenFw -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff \r
        $(CP) ${dst} $(OUTPUT_DIR)\r
        $(CP) ${dst} $(BIN_DIR)\r
        -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
\r
[Dependency-Expression-File]\r
    <InputFile>\r
        ?.dxs, ?.Dxs, ?.DXS\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME).depex\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command>\r
        "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
\r
[Acpi-Source-Language-File]\r
    <InputFile>\r
        ?.asl, ?.Asl, ?.ASL\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command.MSFT, Command.INTEL>\r
        Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}\r
        "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
        "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
\r
    <Command.GCC>\r
        Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}\r
        "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
        "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
\r
[C-Code-File.AcpiTable]\r
    <InputFile>\r
        ?.c\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
\r
    <Command.GCC>\r
        "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
\r
[Acpi-Table-Code-File]\r
    <InputFile>\r
        ?.aslc, ?.act\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
\r
    <Command.GCC>\r
        "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
        \r
    <Command.XCODE>        \r
        "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi\r
      \r
      \r
[Masm16-Code-File]\r
    <InputFile>\r
        ?.asm16, ?.Asm16, ?.ASM16\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_base}.com\r
\r
    <Command.MSFT, Command.INTEL>\r
        cd $(OUTPUT_DIR)(+)${s_dir}\r
        "$(ASM)" /nologo /c /omf /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${src}\r
        "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,\r
\r
    <Command.GCC>\r
      "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
      Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
      "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii\r
      "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -( $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj -)\r
     \r
    <Command.XCODE>\r
      "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
      Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
      "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii\r
      "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
      otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}\r
      \r
\r
[Microcode-File.USER_DEFINED, Microcode-File.Microcode]\r
    <InputFile>\r
        ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_base}.mcb\r
\r
    <Command>\r
        GenFw -o ${dst} -m ${src}\r
\r
[Microcode-Binary-File]\r
    <InputFile>\r
        *.mcb\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME).bin\r
\r
    <Command>\r
        GenFw -o ${dst} -j $(MICROCODE_BINARY_FILES)\r
        -$(CP) ${dst} $(BIN_DIR)\r
\r
[EFI-Image-File]\r
    <InputFile>\r
        ?.efi, ?.Efi, ?.EFI\r
\r
    <OutputFile>\r
\r
    <Command>\r
\r
[Unicode-Text-File]\r
    <InputFile>\r
        *.uni, *.Uni, *.UNI\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)AutoGen.c\r
        $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h\r
\r
    <Command>\r
\r
[Efi-Image.UEFI_OPTIONROM]\r
    <InputFile>\r
        ?.efi, ?.EFI, ?.Efi\r
\r
    <OutputFile>\r
        $(BIN_DIR)(+)$(MODULE_NAME).rom\r
\r
    <Command>\r
        $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src\r
\r
[Unicode-Text-File.UEFI_HII]\r
    <InputFile>\r
        *.uni, *.Uni, *.UNI\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk\r
        $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h\r
\r
    <Command>\r
\r
[Visual-Form-Representation-File.UEFI_HII]\r
    <InputFile>\r
        ?.vfr\r
        ?.Vfr\r
        ?.VFR\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk\r
\r
    <Command>\r
        -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1\r
        "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1\r
        "$(VFR)" $(VFR_FLAGS) --create-ifr-package --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
\r
[Hii-Binary-Package.UEFI_HII]\r
    <InputFile>\r
        *.hpk\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib\r
\r
    <Command.MSFT, Command.INTEL>\r
        GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES)\r
        "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc\r
\r
    <Command.GCC>\r
        GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)\r
        "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}\r