[mirror_edk2.git] / BaseTools / Conf / build_rule.template

#\r
#  Copyright (c) 2007-2009, Intel Corporation\r
#  Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.\r
#  All rights reserved. This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
#  Filename: build_rule.template\r
#\r
\r
## Syntax\r
#\r
# "*" is used to indicate that the source files will be processed at the same time.\r
# "?" is used to indicate that the source files will be processed one by one.\r
#\r
# "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>\r
#   <InputFile[.<ToolChainFamily>]> <EOL>\r
#       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]\r
#\r
#   <OutputFile[.<ToolChainFamily>]> <EOL>\r
#       <FileFullPath>\r
#\r
#   <ExtraDependency>\r
#       <FileFullPath>\r
#\r
#   <Command[.<ToolChainFamily>]> <EOL>\r
#       <Command1>\r
#       [<Command2>]\r
#\r
# <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.\r
# Missing <InputFile> will cause an exception and break build.\r
# Missing <Command> will cause that related build target won't be generated but\r
#   won't break build.\r
#\r
\r
## Placeholders for string substitution\r
#\r
#   ${src}      Source file(s) to be built (full path)\r
#   ${s_path}   Source file directory (absolute path)\r
#   ${s_dir}    Source file relative directory within a module\r
#               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)\r
#   ${s_name}   Source file name without path\r
#   ${s_base}   Source file name without extension and path\r
#   ${s_ext}    Source file extension\r
#\r
#   ${dst}      Destination file(s) built from ${src} (full path)\r
#   ${d_path}   Destination file directory (absolute path)\r
#   ${d_name}   Destination file name without path\r
#   ${d_base}   Destination file name without extension and path\r
#   ${d_ext}    Destination file extension\r
#\r
#   (+)         Directory separator\r
#\r
\r
## Macro\r
#   $(WORKSPACE)        Workspace directory\r
#   $(OUTPUT_DIR)       Directory for intermediate files for building a module\r
#   $(DEBUG_DIR)        Directory for files used to debug a module\r
#   $(BUILD_DIR)        All files for building a platform will be put in this directory\r
#   $(BIN_DIR)          Common directory for executable files\r
#   $(FV_DIR)           Directory to store flash image files\r
#   $(INC)              Search path of current module\r
#   $(INC_LIST)         A file containing search pathes of current module\r
#   $(LIBS)             Static library files of current module\r
#   $(<tool>_FLAGS)     Tools flags of current module\r
#   $(MODULE_NAME)      Current module name\r
#   $(MODULE_TYPE)      Current module type\r
#   $(ARCH)             Architecture of current module\r
#   $(TOOLCHAIN)        Toolchain used to build current module\r
#   $(TARGET)           Target of current module (DEBUG/RELEASE)\r
#   $(<tool>)           Path of tool\r
#   $(EDK_TOOLS_PATH)   Path of build tools\r
#   $(<FILE_TYPES>)     File list of each file type\r
#                       (Note: The macro name is derived from file type name. For example,\r
#                        C-Code-File will have C_CODE_FILES macro.)\r
#   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type\r
#                       (\r
#                        Note: The macro and file name are derived from file type name.\r
#                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing\r
#                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name\r
#                        will be generated only when this macro is used in command line.\r
#                        This is intended to get over the long command line limitation.\r
#                       )\r
#\r
#   $(CP)     copy command\r
#   $(MV)     move command\r
#   $(RM)     delete command\r
#   $(MD)     create dir command\r
#   $(RD)     remove dir command\r
#\r
\r
## Reserved File-Type\r
#\r
# Don't change following names of file types and their associated files,\r
# which are also used in tools' code\r
#\r
#   C-Code-File\r
#   C-Header-File\r
#   Dynamic-Library-File\r
#   Static-Library-File\r
#   Visual-Form-Representation-File\r
#   Unicode-Text-File\r
#\r
\r
[C-Code-File]\r
    <InputFile>\r
        ?.c\r
        ?.C\r
        ?.cc\r
        ?.CC\r
        ?.cpp\r
        ?.Cpp\r
        ?.CPP\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}\r
\r
    <Command.GCC, Command.RVCT>\r
        # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues\r
        "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}\r
        "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}\r
\r
[C-Header-File]\r
    <InputFile>\r
        *.h, *.H\r
\r
    <OutputFile>\r
\r
    <Command>\r
\r
\r
[Assembly-Code-File.COMMON.COMMON]\r
    <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>\r
        ?.asm, ?.Asm, ?.ASM\r
\r
    <InputFile.GCC>\r
        ?.S, ?.s\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
        Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
        "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii\r
\r
    <Command.GCC, Command.RVCT>\r
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
        Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
        # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues\r
        "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii\r
\r
[Assembly-Code-File.COMMON.IPF]\r
    <InputFile>\r
        ?.s\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
        Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
        # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues\r
        "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii\r
\r
[Visual-Form-Representation-File]\r
    <InputFile>\r
        ?.vfr\r
        ?.Vfr\r
        ?.VFR\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c\r
\r
    <Command>\r
        -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1\r
        "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        -$(MD) ${d_path} > NUL 2>&1\r
        "$(VFR)" $(VFR_FLAGS) --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
\r
[Object-File]\r
    <InputFile>\r
        *.obj\r
        *.o\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME).lib\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)\r
\r
    <Command.GCC>\r
        "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @"$(OBJECT_FILES_LIST)"\r
    \r
    <Command.RVCT>\r
        "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)\r
    \r
    <Command.RVCTCYGWIN>\r
        # $(OBJECT_FILES_LIST) has wrong paths for cygwin\r
        "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)\r
\r
    <Command.XCODE>\r
        "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)\r
\r
[Static-Library-File]\r
    <InputFile>\r
        *.lib\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)$(MODULE_NAME).dll\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)\r
\r
    <Command.GCC>\r
        "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) @"$(STATIC_LIBRARY_FILES_LIST)" -\) $(DLINK2_FLAGS)\r
        "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}\r
\r
    <Command.RVCT>\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
\r
    <Command.RVCTCYGWIN>\r
        #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)\r
\r
    <Command.XCODE>\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)\r
    \r
    \r
[Static-Library-File.USER_DEFINED]\r
    <InputFile>\r
        *.lib\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)$(MODULE_NAME)\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)\r
\r
    <Command.GCC>\r
        "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)\r
\r
    <Command.RVCT>\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
\r
    <Command.RVCTCYGWIN>\r
        #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin\r
        "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)\r
\r
    <Command.XCODE>\r
        "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)\r
      \r
      \r
[Dynamic-Library-File]\r
    <InputFile>\r
        ?.dll\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)$(MODULE_NAME).efi\r
\r
    <Command.MSFT, Command.INTEL, Command.GCC, Command.RVCT>      \r
        GenFw -e $(MODULE_TYPE) -o ${dst} ${src}\r
        $(CP) ${dst} $(OUTPUT_DIR)\r
        $(CP) ${dst} $(BIN_DIR)\r
        -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
        \r
    <Command.XCODE>\r
        # tool to convert Mach-O to PE/COFF\r
        "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff\r
        # create symbol file for GDB debug\r
        -$(DSYMUTIL) ${src}\r
        GenFw -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff \r
        $(CP) ${dst} $(OUTPUT_DIR)\r
        $(CP) ${dst} $(BIN_DIR)\r
        -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
\r
[Dependency-Expression-File]\r
    <InputFile>\r
        ?.dxs, ?.Dxs, ?.DXS\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME).depex\r
\r
    <Command>\r
        "$(PP)" $(CC_FLAGS) $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
        GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
\r
[Acpi-Source-Language-File]\r
    <InputFile>\r
        ?.asl, ?.Asl, ?.ASL\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command.MSFT, Command.INTEL>\r
        Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}\r
        "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
        "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
\r
    <Command.GCC>\r
        Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}\r
        "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
        "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
\r
[C-Code-File.AcpiTable]\r
    <InputFile>\r
        ?.c\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
\r
    <Command.GCC>\r
        "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
\r
[Acpi-Table-Code-File]\r
    <InputFile>\r
        ?.aslc, ?.act\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <Command.MSFT, Command.INTEL>\r
        "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
\r
    <Command.GCC>\r
        "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
        \r
    <Command.XCODE>        \r
        "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}\r
        "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
        "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi\r
        GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi\r
      \r
      \r
[Masm16-Code-File]\r
    <InputFile>\r
        ?.asm16, ?.Asm16, ?.ASM16\r
\r
    <ExtraDependency>\r
        $(MAKE_FILE)\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_base}.com\r
\r
    <Command.MSFT, Command.INTEL>\r
        cd $(OUTPUT_DIR)(+)${s_dir}\r
        "$(ASM)" /nologo /c /omf /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${src}\r
        "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,\r
\r
    <Command.GCC>\r
      "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
      Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
      "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii\r
      "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -( $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj -)\r
     \r
    <Command.XCODE>\r
      "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
      Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
      "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii\r
      "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
      otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}\r
      \r
\r
[Microcode-File]\r
    <InputFile>\r
        ?.txt, ?.TXT, ?.Txt, ?.mut\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)${s_base}.mcb\r
\r
    <Command>\r
        GenFw -o ${dst} -m ${src}\r
\r
[Microcode-Binary-File]\r
    <InputFile>\r
        *.mcb\r
\r
    <OutputFile>\r
        $(OUTPUT_DIR)(+)$(MODULE_NAME).bin\r
\r
    <Command>\r
        GenFw -o ${dst} -j $(MICROCODE_BINARY_FILES)\r
        -$(CP) ${dst} $(BIN_DIR)\r
\r
[EFI-Image-File]\r
    <InputFile>\r
        ?.efi, ?.Efi, ?.EFI\r
\r
    <OutputFile>\r
\r
    <Command>\r
\r
[Unicode-Text-File]\r
    <InputFile>\r
        *.uni, *.Uni, *.UNI\r
\r
    <OutputFile>\r
        $(DEBUG_DIR)(+)AutoGen.c\r
        $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h\r
\r
    <Command>\r
\r
[Efi-Image.UEFI_OPTIONROM]\r
    <InputFile>\r
        ?.efi, ?.EFI, ?.Efi\r
\r
    <OutputFile>\r
        $(BIN_DIR)(+)$(MODULE_NAME).rom\r
\r
    <Command>\r
        $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src\r
\r
Commit	Line	Data
07a756b9	1	#\r
c6094890	2	# Copyright (c) 2007-2009, Intel Corporation\r
fd171542	3	# Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.\r
07a756b9	4	# All rights reserved. This program and the accompanying materials\r
	5	# are licensed and made available under the terms and conditions of the BSD License\r
	6	# which accompanies this distribution. The full text of the license may be found at\r
	7	# http://opensource.org/licenses/bsd-license.php\r
	8	\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	11	#\r
	12	# Filename: build_rule.template\r
	13	#\r
	14	\r
	15	## Syntax\r
	16	#\r
	17	# "*" is used to indicate that the source files will be processed at the same time.\r
	18	# "?" is used to indicate that the source files will be processed one by one.\r
	19	#\r
f285eb16	20	# "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>\r
07a756b9	21	# <InputFile[.<ToolChainFamily>]> <EOL>\r
f285eb16	22	# (?\|).<File-Extension> [(\n\|,) (?\|).<File-Extension>]\r
07a756b9	23	#\r
	24	# <OutputFile[.<ToolChainFamily>]> <EOL>\r
	25	# <FileFullPath>\r
	26	#\r
f285eb16	27	# <ExtraDependency>\r
	28	# <FileFullPath>\r
	29	#\r
07a756b9	30	# <Command[.<ToolChainFamily>]> <EOL>\r
	31	# <Command1>\r
	32	# [<Command2>]\r
	33	#\r
f285eb16	34	# <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE in EDK.\r
	35	# Missing <InputFile> will cause an exception and break build.\r
	36	# Missing <Command> will cause that related build target won't be generated but\r
	37	# won't break build.\r
	38	#\r
07a756b9	39	\r
	40	## Placeholders for string substitution\r
	41	#\r
	42	# ${src} Source file(s) to be built (full path)\r
	43	# ${s_path} Source file directory (absolute path)\r
	44	# ${s_dir} Source file relative directory within a module\r
	45	# (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)\r
	46	# ${s_name} Source file name without path\r
	47	# ${s_base} Source file name without extension and path\r
	48	# ${s_ext} Source file extension\r
	49	#\r
	50	# ${dst} Destination file(s) built from ${src} (full path)\r
	51	# ${d_path} Destination file directory (absolute path)\r
	52	# ${d_name} Destination file name without path\r
	53	# ${d_base} Destination file name without extension and path\r
	54	# ${d_ext} Destination file extension\r
	55	#\r
	56	# (+) Directory separator\r
	57	#\r
	58	\r
	59	## Macro\r
	60	# $(WORKSPACE) Workspace directory\r
	61	# $(OUTPUT_DIR) Directory for intermediate files for building a module\r
	62	# $(DEBUG_DIR) Directory for files used to debug a module\r
	63	# $(BUILD_DIR) All files for building a platform will be put in this directory\r
	64	# $(BIN_DIR) Common directory for executable files\r
	65	# $(FV_DIR) Directory to store flash image files\r
	66	# $(INC) Search path of current module\r
a388ec43	67	# $(INC_LIST) A file containing search pathes of current module\r
07a756b9	68	# $(LIBS) Static library files of current module\r
	69	# $(<tool>_FLAGS) Tools flags of current module\r
	70	# $(MODULE_NAME) Current module name\r
	71	# $(MODULE_TYPE) Current module type\r
	72	# $(ARCH) Architecture of current module\r
	73	# $(TOOLCHAIN) Toolchain used to build current module\r
	74	# $(TARGET) Target of current module (DEBUG/RELEASE)\r
	75	# $(<tool>) Path of tool\r
	76	# $(EDK_TOOLS_PATH) Path of build tools\r
a388ec43	77	# $(<FILE_TYPES>) File list of each file type\r
07a756b9	78	# (Note: The macro name is derived from file type name. For example,\r
a388ec43	79	# C-Code-File will have C_CODE_FILES macro.)\r
	80	# $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type\r
	81	# (\r
	82	# Note: The macro and file name are derived from file type name.\r
a7d37687	83	# For example, C-Code-File will have C_CODE_FILES_LIST macro pointing\r
a388ec43	84	# to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name\r
	85	# will be generated only when this macro is used in command line.\r
	86	# This is intended to get over the long command line limitation.\r
	87	# )\r
07a756b9	88	#\r
	89	# $(CP) copy command\r
	90	# $(MV) move command\r
	91	# $(RM) delete command\r
	92	# $(MD) create dir command\r
	93	# $(RD) remove dir command\r
	94	#\r
	95	\r
	96	## Reserved File-Type\r
	97	#\r
d78f8ac7	98	# Don't change following names of file types and their associated files,\r
07a756b9	99	# which are also used in tools' code\r
	100	#\r
	101	# C-Code-File\r
	102	# C-Header-File\r
	103	# Dynamic-Library-File\r
	104	# Static-Library-File\r
	105	# Visual-Form-Representation-File\r
	106	# Unicode-Text-File\r
	107	#\r
	108	\r
f285eb16	109	[C-Code-File]\r
07a756b9	110	<InputFile>\r
	111	?.c\r
	112	?.C\r
	113	?.cc\r
	114	?.CC\r
	115	?.cpp\r
	116	?.Cpp\r
	117	?.CPP\r
f285eb16	118	\r
f285eb16	119	<ExtraDependency>\r
23fdff82	120	$(MAKE_FILE)\r
07a756b9	121	\r
	122	<OutputFile>\r
	123	$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	124	\r
	125	<Command.MSFT, Command.INTEL>\r
	126	"$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}\r
	127	\r
fd171542	128	<Command.GCC, Command.RVCT>\r
	129	# For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues\r
	130	"$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}\r
3b6c90a1	131	"$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}\r
07a756b9	132	\r
f285eb16	133	[C-Header-File]\r
07a756b9	134	<InputFile>\r
	135	.h, .H\r
	136	\r
	137	<OutputFile>\r
07a756b9	138	\r
	139	<Command>\r
	140	\r
	141	\r
f285eb16	142	[Assembly-Code-File.COMMON.COMMON]\r
fd171542	143	<InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>\r
f285eb16	144	?.asm, ?.Asm, ?.ASM\r
07a756b9	145	\r
07a756b9	146	<InputFile.GCC>\r
3b6c90a1	147	?.S, ?.s\r
f285eb16	148	\r
f285eb16	149	<ExtraDependency>\r
23fdff82	150	$(MAKE_FILE)\r
07a756b9	151	\r
	152	<OutputFile>\r
	153	$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	154	\r
	155	<Command.MSFT, Command.INTEL>\r
	156	"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
	157	Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
ffe084ee	158	"$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii\r
07a756b9	159	\r
fd171542	160	<Command.GCC, Command.RVCT>\r
07a756b9	161	"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
07a756b9	162	Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
fd171542	163	# For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues\r
fd171542	164	"$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii\r
07a756b9	165	\r
f285eb16	166	[Assembly-Code-File.COMMON.IPF]\r
07a756b9	167	<InputFile>\r
07a756b9	168	?.s\r
f285eb16	169	\r
f285eb16	170	<ExtraDependency>\r
23fdff82	171	$(MAKE_FILE)\r
07a756b9	172	\r
	173	<OutputFile>\r
	174	$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	175	\r
	176	<Command.MSFT, Command.INTEL>\r
	177	"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
	178	Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
fd171542	179	# For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues\r
fd171542	180	"$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii\r
07a756b9	181	\r
f285eb16	182	[Visual-Form-Representation-File]\r
07a756b9	183	<InputFile>\r
	184	?.vfr\r
	185	?.Vfr\r
	186	?.VFR\r
f285eb16	187	\r
f285eb16	188	<ExtraDependency>\r
23fdff82	189	$(MAKE_FILE)\r
07a756b9	190	\r
	191	<OutputFile>\r
	192	$(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c\r
	193	\r
	194	<Command>\r
77696b61	195	-$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1\r
6ff04b8e	196	"$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
77696b61	197	-$(MD) ${d_path} > NUL 2>&1\r
fd171542	198	"$(VFR)" $(VFR_FLAGS) --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
07a756b9	199	\r
f285eb16	200	[Object-File]\r
07a756b9	201	<InputFile>\r
	202	*.obj\r
	203	*.o\r
	204	\r
	205	<OutputFile>\r
	206	$(OUTPUT_DIR)(+)$(MODULE_NAME).lib\r
	207	\r
	208	<Command.MSFT, Command.INTEL>\r
3b6c90a1	209	"$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)\r
07a756b9	210	\r
07a756b9	211	<Command.GCC>\r
c9c705a8	212	"$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @"$(OBJECT_FILES_LIST)"\r
fd171542	213	\r
	214	<Command.RVCT>\r
	215	"$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)\r
	216	\r
	217	<Command.RVCTCYGWIN>\r
	218	# $(OBJECT_FILES_LIST) has wrong paths for cygwin\r
	219	"$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)\r
	220	\r
	221	<Command.XCODE>\r
	222	"$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)\r
07a756b9	223	\r
f285eb16	224	[Static-Library-File]\r
f285eb16	225	<InputFile>\r
2eab98c1	226	*.lib\r
07a756b9	227	\r
f285eb16	228	<ExtraDependency>\r
4bf47781	229	$(MAKE_FILE)\r
9ba67b5c	230	\r
07a756b9	231	<OutputFile>\r
	232	$(DEBUG_DIR)(+)$(MODULE_NAME).dll\r
	233	\r
	234	<Command.MSFT, Command.INTEL>\r
3b6c90a1	235	"$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)\r
07a756b9	236	\r
07a756b9	237	<Command.GCC>\r
c9c705a8	238	"$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) @"$(STATIC_LIBRARY_FILES_LIST)" -\) $(DLINK2_FLAGS)\r
3b6c90a1	239	"$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}\r
a7d37687	240	\r
fd171542	241	<Command.RVCT>\r
	242	"$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
	243	\r
	244	<Command.RVCTCYGWIN>\r
	245	#$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin\r
	246	"$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)\r
	247	\r
	248	<Command.XCODE>\r
	249	"$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
	250	\r
	251	\r
a7d37687	252	[Static-Library-File.USER_DEFINED]\r
	253	<InputFile>\r
	254	*.lib\r
	255	\r
	256	<ExtraDependency>\r
	257	$(MAKE_FILE)\r
	258	\r
	259	<OutputFile>\r
	260	$(DEBUG_DIR)(+)$(MODULE_NAME)\r
	261	\r
	262	<Command.MSFT, Command.INTEL>\r
3b6c90a1	263	"$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)\r
a7d37687	264	\r
a7d37687	265	<Command.GCC>\r
3b6c90a1	266	"$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)\r
07a756b9	267	\r
fd171542	268	<Command.RVCT>\r
	269	"$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
	270	\r
	271	<Command.RVCTCYGWIN>\r
	272	#$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin\r
	273	"$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)\r
	274	\r
	275	<Command.XCODE>\r
	276	"$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)\r
	277	\r
	278	\r
f285eb16	279	[Dynamic-Library-File]\r
07a756b9	280	<InputFile>\r
	281	?.dll\r
	282	\r
	283	<OutputFile>\r
	284	$(DEBUG_DIR)(+)$(MODULE_NAME).efi\r
	285	\r
fd171542	286	<Command.MSFT, Command.INTEL, Command.GCC, Command.RVCT> \r
07a756b9	287	GenFw -e $(MODULE_TYPE) -o ${dst} ${src}\r
	288	$(CP) ${dst} $(OUTPUT_DIR)\r
	289	$(CP) ${dst} $(BIN_DIR)\r
	290	-$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
fd171542	291	\r
	292	<Command.XCODE>\r
	293	# tool to convert Mach-O to PE/COFF\r
	294	"$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff\r
	295	# create symbol file for GDB debug\r
	296	-$(DSYMUTIL) ${src}\r
	297	GenFw -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff \r
	298	$(CP) ${dst} $(OUTPUT_DIR)\r
	299	$(CP) ${dst} $(BIN_DIR)\r
	300	-$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)\r
07a756b9	301	\r
f285eb16	302	[Dependency-Expression-File]\r
07a756b9	303	<InputFile>\r
	304	?.dxs, ?.Dxs, ?.DXS\r
	305	\r
	306	<OutputFile>\r
	307	$(OUTPUT_DIR)(+)$(MODULE_NAME).depex\r
	308	\r
	309	<Command>\r
58ce61eb	310	"$(PP)" $(CC_FLAGS) $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
	311	Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i\r
	312	GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
07a756b9	313	\r
f285eb16	314	[Acpi-Source-Language-File]\r
07a756b9	315	<InputFile>\r
	316	?.asl, ?.Asl, ?.ASL\r
	317	\r
	318	<OutputFile>\r
ffe084ee	319	$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml\r
07a756b9	320	\r
f285eb16	321	<ExtraDependency>\r
	322	$(MAKE_FILE)\r
	323	\r
07a756b9	324	<Command.MSFT, Command.INTEL>\r
64cd21af LG	325	Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}\r
64cd21af LG	326	"$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
38d4998a	327	"$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
07a756b9	328	\r
c6094890	329	<Command.GCC>\r
	330	Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}\r
	331	"$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
38d4998a	332	"$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii\r
c6094890	333	\r
f0373115 LG	334	[C-Code-File.AcpiTable]\r
	335	<InputFile>\r
	336	?.c\r
	337	\r
	338	<OutputFile>\r
ffe084ee	339	$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi\r
f0373115 LG	340	\r
	341	<ExtraDependency>\r
	342	$(MAKE_FILE)\r
	343	\r
	344	<Command.MSFT, Command.INTEL>\r
	345	"$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
	346	"$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	347	GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
	348	\r
c6094890	349	<Command.GCC>\r
623471a3	350	"$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
623471a3	351	"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
c6094890	352	GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
c6094890	353	\r
f285eb16	354	[Acpi-Table-Code-File]\r
07a756b9	355	<InputFile>\r
f0373115	356	?.aslc, ?.act\r
07a756b9	357	\r
07a756b9	358	<OutputFile>\r
ffe084ee	359	$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi\r
07a756b9	360	\r
f285eb16	361	<ExtraDependency>\r
	362	$(MAKE_FILE)\r
	363	\r
07a756b9	364	<Command.MSFT, Command.INTEL>\r
a1c949f3 LG	365	"$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
a1c949f3 LG	366	"$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
07a756b9	367	GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
07a756b9	368	\r
c6094890	369	<Command.GCC>\r
	370	"$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}\r
	371	"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	372	GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll\r
fd171542	373	\r
	374	<Command.XCODE> \r
	375	"$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}\r
	376	"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	377	"$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi\r
	378	GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi\r
	379	\r
	380	\r
f285eb16	381	[Masm16-Code-File]\r
07a756b9	382	<InputFile>\r
	383	?.asm16, ?.Asm16, ?.ASM16\r
	384	\r
f285eb16	385	<ExtraDependency>\r
	386	$(MAKE_FILE)\r
	387	\r
07a756b9	388	<OutputFile>\r
	389	$(OUTPUT_DIR)(+)${s_base}.com\r
	390	\r
	391	<Command.MSFT, Command.INTEL>\r
	392	cd $(OUTPUT_DIR)(+)${s_dir}\r
	393	"$(ASM)" /nologo /c /omf /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${src}\r
	394	"$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,\r
	395	\r
fd171542	396	<Command.GCC>\r
	397	"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
	398	Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
	399	"$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii\r
	400	"$(DLINK)" -o ${dst} $(DLINK_FLAGS) -( $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj -)\r
	401	\r
	402	<Command.XCODE>\r
	403	"$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i\r
	404	Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i\r
	405	"$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii\r
	406	"$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj\r
	407	otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib \| hex2bin.py ${dst}\r
	408	\r
	409	\r
f285eb16	410	[Microcode-File]\r
07a756b9	411	<InputFile>\r
576b299a	412	?.txt, ?.TXT, ?.Txt, ?.mut\r
07a756b9	413	\r
	414	<OutputFile>\r
	415	$(OUTPUT_DIR)(+)${s_base}.mcb\r
	416	\r
	417	<Command>\r
	418	GenFw -o ${dst} -m ${src}\r
	419	\r
f285eb16	420	[Microcode-Binary-File]\r
07a756b9	421	<InputFile>\r
	422	*.mcb\r
	423	\r
	424	<OutputFile>\r
	425	$(OUTPUT_DIR)(+)$(MODULE_NAME).bin\r
	426	\r
	427	<Command>\r
a7d37687	428	GenFw -o ${dst} -j $(MICROCODE_BINARY_FILES)\r
25ab7ab1	429	-$(CP) ${dst} $(BIN_DIR)\r
07a756b9	430	\r
f285eb16	431	[EFI-Image-File]\r
	432	<InputFile>\r
	433	?.efi, ?.Efi, ?.EFI\r
	434	\r
	435	<OutputFile>\r
	436	\r
	437	<Command>\r
	438	\r
e1b4bd14 LG	439	[Unicode-Text-File]\r
	440	<InputFile>\r
	441	.uni, .Uni, *.UNI\r
	442	\r
	443	<OutputFile>\r
	444	$(DEBUG_DIR)(+)AutoGen.c\r
	445	$(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h\r
	446	\r
	447	<Command>\r
15543340	448	\r
	449	[Efi-Image.UEFI_OPTIONROM]\r
	450	<InputFile>\r
	451	?.efi, ?.EFI, ?.Efi\r
	452	\r
	453	<OutputFile>\r
	454	$(BIN_DIR)(+)$(MODULE_NAME).rom\r
	455	\r
	456	<Command>\r
de29c94a	457	$(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src\r
15543340	458	\r