[mirror_edk2.git] / BeagleBoardPkg / BeagleBoardPkg.fdf

# FLASH layout file for Beagle board.\r
#\r
# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>\r
#\r
#    This program and the accompanying materials\r
#    are licensed and made available under the terms and conditions of the BSD License\r
#    which accompanies this distribution. The full text of the license may be found at\r
#    http://opensource.org/licenses/bsd-license.php\r
#\r
#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
\r
[FD.BeagleBoard_EFI]\r
BaseAddress   = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.\r
Size          = 0x00080000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x1\r
NumBlocks     = 0x80000\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
0x00000000|0x00080000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvBaseSize\r
FV = FVMAIN_COMPACT\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x1\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services) \r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  \r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
   \r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf  \r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf  \r
\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
  \r
!if $(TARGET) == RELEASE\r
  #\r
  # Semi-hosting filesystem\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
!endif\r
  \r
  #\r
  # Nand Flash\r
  #\r
  INF Omap35xxPkg/Flash/Flash.inf\r
\r
  #\r
  # MMC/SD\r
  #\r
  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
  INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf\r
  \r
  #\r
  # I2C\r
  #\r
  INF Omap35xxPkg/SmbusDxe/Smbus.inf\r
  \r
  #\r
  # SoC Drivers\r
  #\r
  INF Omap35xxPkg/Gpio/Gpio.inf\r
  INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf\r
  INF Omap35xxPkg/TimerDxe/TimerDxe.inf \r
  INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf\r
\r
  #\r
  # Power IC\r
  #\r
  INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # USB Support\r
  #\r
\r
  INF Omap35xxPkg/PciEmulation/PciEmulation.inf\r
\r
  #NOTE: Open source EHCI stack doesn't work on Beagleboard.\r
  #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.\r
  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader) \r
  #  \r
  INF EmbeddedPkg/Ebl/Ebl.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # \r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
Commit	Line	Data
0bade105	1	# FLASH layout file for Beagle board.\r
	2	#\r
	3	# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>\r
	4	#\r
	5	# This program and the accompanying materials\r
	6	# are licensed and made available under the terms and conditions of the BSD License\r
	7	# which accompanies this distribution. The full text of the license may be found at\r
	8	# http://opensource.org/licenses/bsd-license.php\r
	9	#\r
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	12	#\r
	13	\r
	14	################################################################################\r
	15	#\r
	16	# FD Section\r
	17	# The [FD] Section is made up of the definition statements and a\r
	18	# description of what goes into the Flash Device Image. Each FD section\r
	19	# defines one flash "device" image. A flash device image may be one of\r
	20	# the following: Removable media bootable image (like a boot floppy\r
	21	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	22	# card,) a System "Flash" image (that would be burned into a system's\r
	23	# flash) or an Update ("Capsule") image that will be used to update and\r
	24	# existing system flash.\r
	25	#\r
	26	################################################################################\r
	27	\r
	28	\r
	29	[FD.BeagleBoard_EFI]\r
	30	BaseAddress = 0x80008000\|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device.\r
	31	Size = 0x00080000\|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device\r
	32	ErasePolarity = 1\r
	33	BlockSize = 0x1\r
	34	NumBlocks = 0x80000\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	0x00000000\|0x00080000\r
	52	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvBaseSize\r
	53	FV = FVMAIN_COMPACT\r
	54	\r
	55	################################################################################\r
	56	#\r
	57	# FV Section\r
	58	#\r
	59	# [FV] section is used to define what components or modules are placed within a flash\r
	60	# device file. This section also defines order the components and modules are positioned\r
	61	# within the image. The [FV] section consists of define statements, set statements and\r
	62	# module statements.\r
	63	#\r
	64	################################################################################\r
65	\r
66	[FV.FvMain]\r
67	BlockSize = 0x1\r
68	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
69	FvAlignment = 8 # FV alignment and FV attributes setting.\r
70	ERASE_POLARITY = 1\r
71	MEMORY_MAPPED = TRUE\r
72	STICKY_WRITE = TRUE\r
73	LOCK_CAP = TRUE\r
74	LOCK_STATUS = TRUE\r
75	WRITE_DISABLED_CAP = TRUE\r
76	WRITE_ENABLED_CAP = TRUE\r
77	WRITE_STATUS = TRUE\r
78	WRITE_LOCK_CAP = TRUE\r
79	WRITE_LOCK_STATUS = TRUE\r
80	READ_DISABLED_CAP = TRUE\r
81	READ_ENABLED_CAP = TRUE\r
82	READ_STATUS = TRUE\r
83	READ_LOCK_CAP = TRUE\r
84	READ_LOCK_STATUS = TRUE\r
85	\r
86	INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
87	\r
88	#\r
89	# PI DXE Drivers producing Architectural Protocols (EFI Services) \r
90	#\r
91	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
92	\r
93	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
94	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
95	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
96	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
97	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
98	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
99	\r
100	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
101	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
102	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf \r
103	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
104	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf \r
105	\r
106	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
107	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
108	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
109	\r
89a9f54f	110	!if $(TARGET) == RELEASE\r
0bade105	111	#\r
	112	# Semi-hosting filesystem\r
	113	#\r
	114	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
89a9f54f	115	!endif\r
0bade105	116	\r
	117	#\r
	118	# Nand Flash\r
	119	#\r
	120	INF Omap35xxPkg/Flash/Flash.inf\r
	121	\r
	122	#\r
	123	# MMC/SD\r
	124	#\r
	125	INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
	126	INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf\r
	127	\r
	128	#\r
	129	# I2C\r
	130	#\r
	131	INF Omap35xxPkg/SmbusDxe/Smbus.inf\r
	132	\r
	133	#\r
	134	# SoC Drivers\r
	135	#\r
	136	INF Omap35xxPkg/Gpio/Gpio.inf\r
	137	INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf\r
	138	INF Omap35xxPkg/TimerDxe/TimerDxe.inf \r
	139	INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf\r
	140	\r
	141	#\r
	142	# Power IC\r
	143	#\r
	144	INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf\r
	145	\r
	146	#\r
	147	# FAT filesystem + GPT/MBR partitioning\r
	148	#\r
	149	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	150	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
	151	INF FatPkg/EnhancedFatDxe/Fat.inf\r
	152	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	153	\r
	154	#\r
	155	# USB Support\r
	156	#\r
	157	\r
	158	INF Omap35xxPkg/PciEmulation/PciEmulation.inf\r
	159	\r
	160	#NOTE: Open source EHCI stack doesn't work on Beagleboard.\r
	161	#NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.\r
	162	INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
	163	INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
	164	INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
	165	\r
	166	#\r
	167	# UEFI application (Shell Embedded Boot Loader) \r
	168	# \r
	169	INF EmbeddedPkg/Ebl/Ebl.inf\r
	170	\r
	171	#\r
	172	# Bds\r
	173	#\r
	174	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	175	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
	176	INF ArmPlatformPkg/Bds/Bds.inf\r
	177	\r
	178	\r
	179	[FV.FVMAIN_COMPACT]\r
180	FvAlignment = 8\r
181	ERASE_POLARITY = 1\r
182	MEMORY_MAPPED = TRUE\r
183	STICKY_WRITE = TRUE\r
184	LOCK_CAP = TRUE\r
185	LOCK_STATUS = TRUE\r
186	WRITE_DISABLED_CAP = TRUE\r
187	WRITE_ENABLED_CAP = TRUE\r
188	WRITE_STATUS = TRUE\r
189	WRITE_LOCK_CAP = TRUE\r
190	WRITE_LOCK_STATUS = TRUE\r
191	READ_DISABLED_CAP = TRUE\r
192	READ_ENABLED_CAP = TRUE\r
193	READ_STATUS = TRUE\r
194	READ_LOCK_CAP = TRUE\r
195	READ_LOCK_STATUS = TRUE\r
196	\r
197	INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
198	\r
199	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
200	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
201	SECTION FV_IMAGE = FVMAIN\r
202	}\r
203	}\r
204	\r
205	\r
206	################################################################################\r
207	#\r
208	# Rules are use with the [FV] section's module INF type to define\r
209	# how an FFS file is created for a given INF file. The following Rule are the default\r
210	# rules for the different module type. User can add the customized rules to define the\r
211	# content of the FFS file.\r
212	#\r
213	################################################################################\r
214	\r
215	\r
216	############################################################################\r
217	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
218	############################################################################\r
219	#\r
220	#[Rule.Common.DXE_DRIVER]\r
221	# FILE DRIVER = $(NAMED_GUID) {\r
222	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
223	# COMPRESS PI_STD {\r
224	# GUIDED {\r
225	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
226	# UI STRING="$(MODULE_NAME)" Optional\r
227	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
228	# }\r
229	# }\r
230	# }\r
231	#\r
232	############################################################################\r
233	\r
234	[Rule.Common.SEC]\r
235	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
236	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
237	}\r
238	\r
239	[Rule.Common.PEI_CORE]\r
240	FILE PEI_CORE = $(NAMED_GUID) {\r
241	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
242	UI STRING ="$(MODULE_NAME)" Optional \r
243	}\r
244	\r
245	[Rule.Common.PEIM]\r
246	FILE PEIM = $(NAMED_GUID) {\r
247	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
248	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
249	UI STRING="$(MODULE_NAME)" Optional \r
250	}\r
251	\r
252	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
253	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
254	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
255	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
256	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
257	UI STRING="$(MODULE_NAME)" Optional\r
258	}\r
259	}\r
260	\r
261	[Rule.Common.DXE_CORE]\r
262	FILE DXE_CORE = $(NAMED_GUID) {\r
263	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
264	UI STRING="$(MODULE_NAME)" Optional\r
265	}\r
266	\r
267	\r
268	[Rule.Common.UEFI_DRIVER]\r
269	FILE DRIVER = $(NAMED_GUID) {\r
270	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
271	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
272	UI STRING="$(MODULE_NAME)" Optional\r
273	}\r
274	\r
275	[Rule.Common.DXE_DRIVER]\r
276	FILE DRIVER = $(NAMED_GUID) {\r
277	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
278	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
279	UI STRING="$(MODULE_NAME)" Optional\r
280	}\r
281	\r
282	[Rule.Common.DXE_RUNTIME_DRIVER]\r
283	FILE DRIVER = $(NAMED_GUID) {\r
284	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
285	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
286	UI STRING="$(MODULE_NAME)" Optional\r
287	}\r
288	\r
289	\r
290	[Rule.Common.UEFI_APPLICATION]\r
291	FILE APPLICATION = $(NAMED_GUID) {\r
292	UI STRING ="$(MODULE_NAME)" Optional \r
293	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
294	}\r