Original range calculation in GetNextFile() is incorrect.

[mirror_edk2.git] / EdkUnixPkg / Library / EdkGenericBdsLib / BdsConnect.c

/*++\r
\r
Copyright (c) 2006, Intel Corporation                                                         \r
All rights reserved. This program and the accompanying materials                          \r
are licensed and made available under the terms and conditions of the BSD License         \r
which accompanies this distribution.  The full text of the license may be found at        \r
http://opensource.org/licenses/bsd-license.php                                            \r
                                                                                          \r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             \r
\r
Module Name:\r
\r
  BdsConnect.c\r
\r
Abstract:\r
\r
  BDS Lib functions which relate with connect the device\r
\r
--*/\r
\r
VOID\r
BdsLibConnectAll (\r
  VOID\r
  )\r
/*++\r
\r
Routine Description:\r
  \r
  This function will connect all the system driver to controller\r
  first, and then special connect the default console, this make\r
  sure all the system controller avialbe and the platform default\r
  console connected.\r
  \r
Arguments:\r
\r
  None\r
\r
Returns:\r
\r
  None\r
\r
--*/\r
{\r
  //\r
  // Connect the platform console first\r
  //\r
  BdsLibConnectAllDefaultConsoles ();\r
\r
  //\r
  // Generic way to connect all the drivers\r
  //\r
  BdsLibConnectAllDriversToAllControllers ();\r
\r
  //\r
  // Here we have the assumption that we have already had\r
  // platform default console\r
  //\r
  BdsLibConnectAllDefaultConsoles ();\r
}\r
\r
VOID\r
BdsLibGenericConnectAll (\r
  VOID\r
  )\r
/*++\r
\r
Routine Description:\r
  \r
  This function will connect all the system drivers to all controllers\r
  first, and then connect all the console devices the system current \r
  have. After this we should get all the device work and console avariable\r
  if the system have console device.\r
  \r
Arguments:\r
\r
  None\r
\r
Returns:\r
\r
  None\r
\r
--*/\r
{\r
  //\r
  // Most generic way to connect all the drivers\r
  //\r
  BdsLibConnectAllDriversToAllControllers ();\r
  BdsLibConnectAllConsoles ();\r
}\r
\r
EFI_STATUS\r
BdsLibConnectDevicePath (\r
  IN EFI_DEVICE_PATH_PROTOCOL  *DevicePathToConnect\r
  )\r
/*++\r
\r
Routine Description:\r
  This function will create all handles associate with every device\r
  path node. If the handle associate with one device path node can not\r
  be created success, then still give one chance to do the dispatch,\r
  which load the missing drivers if possible.\r
  \r
Arguments:\r
\r
  DevicePathToConnect  - The device path which will be connected, it can\r
                         be a multi-instance device path\r
\r
Returns:\r
\r
  EFI_SUCCESS          - All handles associate with every device path \r
                         node have been created\r
  \r
  EFI_OUT_OF_RESOURCES - There is no resource to create new handles\r
  \r
  EFI_NOT_FOUND        - Create the handle associate with one device \r
                         path node failed\r
\r
--*/\r
{\r
  EFI_STATUS                Status;\r
  EFI_DEVICE_PATH_PROTOCOL  *DevicePath;\r
  EFI_DEVICE_PATH_PROTOCOL  *CopyOfDevicePath;\r
  EFI_DEVICE_PATH_PROTOCOL  *Instance;\r
  EFI_DEVICE_PATH_PROTOCOL  *RemainingDevicePath;\r
  EFI_DEVICE_PATH_PROTOCOL  *Next;\r
  EFI_HANDLE                Handle;\r
  EFI_HANDLE                PreviousHandle;\r
  UINTN                     Size;\r
\r
  if (DevicePathToConnect == NULL) {\r
    return EFI_SUCCESS;\r
  }\r
\r
  DevicePath        = DuplicateDevicePath (DevicePathToConnect);\r
  CopyOfDevicePath  = DevicePath;\r
  if (DevicePath == NULL) {\r
    return EFI_OUT_OF_RESOURCES;\r
  }\r
\r
  do {\r
    //\r
    // The outer loop handles multi instance device paths.\r
    // Only console variables contain multiple instance device paths.\r
    //\r
    // After this call DevicePath points to the next Instance\r
    //\r
    Instance  = GetNextDevicePathInstance (&DevicePath, &Size);\r
    Next      = Instance;\r
    while (!IsDevicePathEndType (Next)) {\r
      Next = NextDevicePathNode (Next);\r
    }\r
\r
    SetDevicePathEndNode (Next);\r
\r
    //\r
    // Start the real work of connect with RemainingDevicePath\r
    //\r
    PreviousHandle = NULL;\r
    do {\r
      //\r
      // Find the handle that best matches the Device Path. If it is only a\r
      // partial match the remaining part of the device path is returned in\r
      // RemainingDevicePath.\r
      //\r
      RemainingDevicePath = Instance;\r
      Status              = gBS->LocateDevicePath (&gEfiDevicePathProtocolGuid, &RemainingDevicePath, &Handle);\r
\r
      if (!EFI_ERROR (Status)) {\r
        if (Handle == PreviousHandle) {\r
          //\r
          // If no forward progress is made try invoking the Dispatcher.\r
          // A new FV may have been added to the system an new drivers\r
          // may now be found.\r
          // Status == EFI_SUCCESS means a driver was dispatched\r
          // Status == EFI_NOT_FOUND means no new drivers were dispatched\r
          //\r
          Status = gDS->Dispatch ();\r
        }\r
\r
        if (!EFI_ERROR (Status)) {\r
          PreviousHandle = Handle;\r
          //\r
          // Connect all drivers that apply to Handle and RemainingDevicePath,\r
          // the Recursive flag is FALSE so only one level will be expanded.\r
          //\r
          // Do not check the connect status here, if the connect controller fail,\r
          // then still give the chance to do dispatch, because partial\r
          // RemainingDevicepath may be in the new FV\r
          //\r
          // 1. If the connect fail, RemainingDevicepath and handle will not\r
          //    change, so next time will do the dispatch, then dispatch's status\r
          //    will take effect\r
          // 2. If the connect success, the RemainingDevicepath and handle will\r
          //    change, then avoid the dispatch, we have chance to continue the\r
          //    next connection\r
          //\r
          gBS->ConnectController (Handle, NULL, RemainingDevicePath, FALSE);\r
        }\r
      }\r
      //\r
      // Loop until RemainingDevicePath is an empty device path\r
      //\r
    } while (!EFI_ERROR (Status) && !IsDevicePathEnd (RemainingDevicePath));\r
\r
  } while (DevicePath != NULL);\r
\r
  if (CopyOfDevicePath != NULL) {\r
    gBS->FreePool (CopyOfDevicePath);\r
  }\r
  //\r
  // All handle with DevicePath exists in the handle database\r
  //\r
  return Status;\r
}\r
\r
EFI_STATUS\r
BdsLibConnectAllEfi (\r
  VOID\r
  )\r
/*++\r
\r
Routine Description:\r
\r
  This function will connect all current system handles recursively. The\r
  connection will finish until every handle's child handle created if it have.\r
  \r
Arguments:\r
\r
  None\r
\r
Returns:\r
\r
  EFI_SUCCESS          - All handles and it's child handle have been connected\r
  \r
  EFI_STATUS           - Return the status of gBS->LocateHandleBuffer(). \r
\r
--*/\r
{\r
  EFI_STATUS  Status;\r
  UINTN       HandleCount;\r
  EFI_HANDLE  *HandleBuffer;\r
  UINTN       Index;\r
\r
  Status = gBS->LocateHandleBuffer (\r
                  AllHandles,\r
                  NULL,\r
                  NULL,\r
                  &HandleCount,\r
                  &HandleBuffer\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  for (Index = 0; Index < HandleCount; Index++) {\r
    Status = gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE);\r
  }\r
\r
  gBS->FreePool (HandleBuffer);\r
\r
  return EFI_SUCCESS;\r
}\r
\r
EFI_STATUS\r
BdsLibDisconnectAllEfi (\r
  VOID\r
  )\r
/*++\r
\r
Routine Description:\r
\r
  This function will disconnect all current system handles. The disconnection\r
  will finish until every handle have been disconnected.\r
  \r
Arguments:\r
\r
  None\r
\r
Returns:\r
\r
  EFI_SUCCESS          - All handles have been disconnected\r
  \r
  EFI_STATUS           - Return the status of gBS->LocateHandleBuffer(). \r
\r
--*/\r
{\r
  EFI_STATUS  Status;\r
  UINTN       HandleCount;\r
  EFI_HANDLE  *HandleBuffer;\r
  UINTN       Index;\r
\r
  //\r
  // Disconnect all\r
  //\r
  Status = gBS->LocateHandleBuffer (\r
                  AllHandles,\r
                  NULL,\r
                  NULL,\r
                  &HandleCount,\r
                  &HandleBuffer\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  for (Index = 0; Index < HandleCount; Index++) {\r
    Status = gBS->DisconnectController (HandleBuffer[Index], NULL, NULL);\r
  }\r
\r
  gBS->FreePool (HandleBuffer);\r
\r
  return EFI_SUCCESS;\r
}\r
\r
VOID\r
BdsLibConnectAllDriversToAllControllers (\r
  VOID\r
  )\r
/*++\r
\r
Routine Description:\r
\r
  Connects all drivers to all controllers. \r
  This function make sure all the current system driver will manage\r
  the correspoinding controllers if have. And at the same time, make\r
  sure all the system controllers have driver to manage it if have. \r
  \r
Arguments:\r
  \r
  None\r
  \r
Returns:\r
  \r
  None\r
  \r
--*/\r
{\r
  EFI_STATUS  Status;\r
\r
  do {\r
    //\r
    // Connect All EFI 1.10 drivers following EFI 1.10 algorithm\r
    //\r
    BdsLibConnectAllEfi ();\r
\r
    //\r
    // Check to see if it's possible to dispatch an more DXE drivers.\r
    // The BdsLibConnectAllEfi () may have made new DXE drivers show up.\r
    // If anything is Dispatched Status == EFI_SUCCESS and we will try\r
    // the connect again.\r
    //\r
    Status = gDS->Dispatch ();\r
\r
  } while (!EFI_ERROR (Status));\r
\r
}\r