Commit | Line | Data |
---|---|---|
1e57a462 | 1 | /** @file\r |
3402aac7 | 2 | Serial IO Abstraction for GDB stub. This allows an EFI consoles that shows up on the system\r |
c6a72cd7 | 3 | running GDB. One console for error information and another console for user input/output.\r |
3402aac7 | 4 | \r |
c6a72cd7 | 5 | Basic packet format is $packet-data#checksum. So every command has 4 bytes of overhead: $,\r |
3402aac7 RC |
6 | #, 0, 0. The 0 and 0 are the ascii characters for the checksum.\r |
7 | \r | |
1e57a462 | 8 | \r |
9 | Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>\r | |
3402aac7 | 10 | \r |
878b807a | 11 | SPDX-License-Identifier: BSD-2-Clause-Patent\r |
1e57a462 | 12 | \r |
13 | **/\r | |
14 | \r | |
15 | #include <GdbStubInternal.h>\r | |
16 | \r | |
17 | //\r | |
18 | // Set TRUE if F Reply package signals a ctrl-c. We can not process the Ctrl-c\r | |
3402aac7 | 19 | // here we need to wait for the periodic callback to do this.\r |
1e57a462 | 20 | //\r |
e7108d0e | 21 | BOOLEAN gCtrlCBreakFlag = FALSE;\r |
1e57a462 | 22 | \r |
23 | //\r | |
24 | // If the periodic callback is called while we are processing an F packet we need\r | |
c6a72cd7 AC |
25 | // to let the callback know to not read from the serial stream as it could steal\r |
26 | // characters from the F response packet\r | |
1e57a462 | 27 | //\r |
e7108d0e | 28 | BOOLEAN gProcessingFPacket = FALSE;\r |
1e57a462 | 29 | \r |
30 | /**\r | |
3402aac7 RC |
31 | Process a control-C break message.\r |
32 | \r | |
33 | Currently a place holder, remove the ASSERT when it gets implemented.\r | |
1e57a462 | 34 | \r |
c6a72cd7 | 35 | @param ErrNo Error information from the F reply packet or other source\r |
1e57a462 | 36 | \r |
37 | **/\r | |
1e57a462 | 38 | VOID\r |
39 | GdbCtrlCBreakMessage (\r | |
e7108d0e | 40 | IN UINTN ErrNo\r |
1e57a462 | 41 | )\r |
42 | {\r | |
43 | // See D.10.5 of gdb.pdf\r | |
44 | // This should look like a break message. Should look like SIGINT\r | |
45 | \r | |
46 | /* TODO: Make sure if we should do anything with ErrNo */\r | |
e7108d0e | 47 | // Turn on the global Ctrl-C flag.\r |
1e57a462 | 48 | gCtrlCBreakFlag = TRUE;\r |
49 | }\r | |
50 | \r | |
1e57a462 | 51 | /**\r |
52 | Parse the F reply packet and extract the return value and an ErrNo if it exists.\r | |
53 | \r | |
54 | @param Packet Packet to parse like an F reply packet\r | |
55 | @param ErrNo Buffer to hold Count bytes that were read\r | |
56 | \r | |
3402aac7 RC |
57 | @retval -1 Error, not a valid F reply packet\r |
58 | @retval other Return the return code from the F reply packet\r | |
1e57a462 | 59 | \r |
60 | **/\r | |
61 | INTN\r | |
62 | GdbParseFReplyPacket (\r | |
e7108d0e MK |
63 | IN CHAR8 *Packet,\r |
64 | OUT UINTN *ErrNo\r | |
1e57a462 | 65 | )\r |
66 | {\r | |
e7108d0e | 67 | INTN RetCode;\r |
3402aac7 | 68 | \r |
1e57a462 | 69 | if (Packet[0] != 'F') {\r |
c6a72cd7 | 70 | // A valid response would be an F packet\r |
1e57a462 | 71 | return -1;\r |
72 | }\r | |
3402aac7 | 73 | \r |
1e57a462 | 74 | RetCode = AsciiStrHexToUintn (&Packet[1]);\r |
3402aac7 RC |
75 | \r |
76 | // Find 1st comma\r | |
e7108d0e MK |
77 | for ( ; *Packet != '\0' && *Packet != ','; Packet++) {\r |
78 | }\r | |
79 | \r | |
1e57a462 | 80 | if (*Packet == '\0') {\r |
81 | *ErrNo = 0;\r | |
82 | return RetCode;\r | |
83 | }\r | |
3402aac7 | 84 | \r |
1e57a462 | 85 | *ErrNo = AsciiStrHexToUintn (++Packet);\r |
86 | \r | |
3402aac7 | 87 | // Find 2nd comma\r |
e7108d0e MK |
88 | for ( ; *Packet != '\0' && *Packet != ','; Packet++) {\r |
89 | }\r | |
90 | \r | |
1e57a462 | 91 | if (*Packet == '\0') {\r |
92 | return RetCode;\r | |
93 | }\r | |
3402aac7 | 94 | \r |
1e57a462 | 95 | if (*(++Packet) == 'C') {\r |
3402aac7 | 96 | GdbCtrlCBreakMessage (*ErrNo);\r |
1e57a462 | 97 | }\r |
3402aac7 | 98 | \r |
1e57a462 | 99 | return RetCode;\r |
100 | }\r | |
101 | \r | |
1e57a462 | 102 | /**\r |
3402aac7 | 103 | Read data from a FileDescriptor. On success number of bytes read is returned. Zero indicates\r |
1e57a462 | 104 | the end of a file. On error -1 is returned. If count is zero, GdbRead returns zero.\r |
105 | \r | |
106 | @param FileDescriptor Device to talk to.\r | |
107 | @param Buffer Buffer to hold Count bytes that were read\r | |
3402aac7 | 108 | @param Count Number of bytes to transfer.\r |
1e57a462 | 109 | \r |
110 | @retval -1 Error\r | |
111 | @retval {other} Number of bytes read.\r | |
112 | \r | |
113 | **/\r | |
114 | INTN\r | |
115 | GdbRead (\r | |
e7108d0e MK |
116 | IN INTN FileDescriptor,\r |
117 | OUT VOID *Buffer,\r | |
118 | IN UINTN Count\r | |
1e57a462 | 119 | )\r |
120 | {\r | |
e7108d0e MK |
121 | CHAR8 Packet[128];\r |
122 | UINTN Size;\r | |
123 | INTN RetCode;\r | |
124 | UINTN ErrNo;\r | |
125 | BOOLEAN ReceiveDone = FALSE;\r | |
3402aac7 | 126 | \r |
1e57a462 | 127 | // Send:\r |
128 | // "Fread,XX,YYYYYYYY,XX\r | |
129 | //\r | |
130 | // XX - FileDescriptor in ASCII\r | |
3402aac7 | 131 | // YYYYYYYY - Buffer address in ASCII\r |
1e57a462 | 132 | // XX - Count in ASCII\r |
133 | // SS - check sum\r | |
134 | //\r | |
135 | Size = AsciiSPrint (Packet, sizeof (Packet), "Fread,%x,%x,%x", FileDescriptor, Buffer, Count);\r | |
136 | // Packet array is too small if you got this ASSERT\r | |
137 | ASSERT (Size < sizeof (Packet));\r | |
3402aac7 | 138 | \r |
1e57a462 | 139 | gProcessingFPacket = TRUE;\r |
140 | SendPacket (Packet);\r | |
141 | Print ((CHAR16 *)L"Packet sent..\n");\r | |
142 | \r | |
143 | do {\r | |
144 | // Reply:\r | |
145 | ReceivePacket (Packet, sizeof (Packet));\r | |
146 | Print ((CHAR16 *)L"Command received..%c\n", Packet[0]);\r | |
147 | \r | |
148 | // Process GDB commands\r | |
149 | switch (Packet[0]) {\r | |
e7108d0e MK |
150 | // Write memory command.\r |
151 | // M addr,length:XX...\r | |
1e57a462 | 152 | case 'M':\r |
153 | WriteToMemory (Packet);\r | |
154 | break;\r | |
155 | \r | |
e7108d0e MK |
156 | // Fretcode, errno, Ctrl-C flag\r |
157 | // retcode - Count read\r | |
1e57a462 | 158 | case 'F':\r |
e7108d0e MK |
159 | // Once target receives F reply packet that means the previous\r |
160 | // transactions are finished.\r | |
1e57a462 | 161 | ReceiveDone = TRUE;\r |
162 | break;\r | |
163 | \r | |
e7108d0e MK |
164 | // Send empty buffer\r |
165 | default:\r | |
166 | SendNotSupported ();\r | |
1e57a462 | 167 | break;\r |
168 | }\r | |
169 | } while (ReceiveDone == FALSE);\r | |
170 | \r | |
171 | RetCode = GdbParseFReplyPacket (Packet, &ErrNo);\r | |
172 | Print ((CHAR16 *)L"RetCode: %x..ErrNo: %x..\n", RetCode, ErrNo);\r | |
3402aac7 | 173 | \r |
1e57a462 | 174 | if (ErrNo > 0) {\r |
e7108d0e | 175 | // Send error to the host if there is any.\r |
1e57a462 | 176 | SendError ((UINT8)ErrNo);\r |
177 | }\r | |
3402aac7 | 178 | \r |
1e57a462 | 179 | gProcessingFPacket = FALSE;\r |
180 | \r | |
181 | return RetCode;\r | |
3402aac7 RC |
182 | }\r |
183 | \r | |
1e57a462 | 184 | /**\r |
3402aac7 RC |
185 | Write data to a FileDescriptor. On success number of bytes written is returned. Zero indicates\r |
186 | nothing was written. On error -1 is returned.\r | |
1e57a462 | 187 | \r |
188 | @param FileDescriptor Device to talk to.\r | |
189 | @param Buffer Buffer to hold Count bytes that are to be written\r | |
3402aac7 | 190 | @param Count Number of bytes to transfer.\r |
1e57a462 | 191 | \r |
192 | @retval -1 Error\r | |
193 | @retval {other} Number of bytes written.\r | |
194 | \r | |
195 | **/\r | |
196 | INTN\r | |
197 | GdbWrite (\r | |
e7108d0e MK |
198 | IN INTN FileDescriptor,\r |
199 | OUT CONST VOID *Buffer,\r | |
200 | IN UINTN Count\r | |
1e57a462 | 201 | )\r |
202 | {\r | |
e7108d0e MK |
203 | CHAR8 Packet[128];\r |
204 | UINTN Size;\r | |
205 | INTN RetCode;\r | |
206 | UINTN ErrNo;\r | |
207 | BOOLEAN ReceiveDone = FALSE;\r | |
1e57a462 | 208 | \r |
209 | // Send:\r | |
210 | // #Fwrite,XX,YYYYYYYY,XX$SS\r | |
211 | //\r | |
212 | // XX - FileDescriptor in ASCII\r | |
3402aac7 | 213 | // YYYYYYYY - Buffer address in ASCII\r |
1e57a462 | 214 | // XX - Count in ASCII\r |
215 | // SS - check sum\r | |
216 | //\r | |
217 | Size = AsciiSPrint (Packet, sizeof (Packet), "Fwrite,%x,%x,%x", FileDescriptor, Buffer, Count);\r | |
218 | // Packet array is too small if you got this ASSERT\r | |
219 | ASSERT (Size < sizeof (Packet));\r | |
3402aac7 | 220 | \r |
1e57a462 | 221 | SendPacket (Packet);\r |
222 | Print ((CHAR16 *)L"Packet sent..\n");\r | |
223 | \r | |
224 | do {\r | |
225 | // Reply:\r | |
226 | ReceivePacket (Packet, sizeof (Packet));\r | |
227 | Print ((CHAR16 *)L"Command received..%c\n", Packet[0]);\r | |
228 | \r | |
229 | // Process GDB commands\r | |
230 | switch (Packet[0]) {\r | |
e7108d0e MK |
231 | // Read memory command.\r |
232 | // m addr,length.\r | |
1e57a462 | 233 | case 'm':\r |
234 | ReadFromMemory (Packet);\r | |
235 | break;\r | |
236 | \r | |
e7108d0e MK |
237 | // Fretcode, errno, Ctrl-C flag\r |
238 | // retcode - Count read\r | |
1e57a462 | 239 | case 'F':\r |
e7108d0e MK |
240 | // Once target receives F reply packet that means the previous\r |
241 | // transactions are finished.\r | |
1e57a462 | 242 | ReceiveDone = TRUE;\r |
243 | break;\r | |
3402aac7 | 244 | \r |
e7108d0e MK |
245 | // Send empty buffer\r |
246 | default:\r | |
247 | SendNotSupported ();\r | |
1e57a462 | 248 | break;\r |
249 | }\r | |
250 | } while (ReceiveDone == FALSE);\r | |
251 | \r | |
252 | RetCode = GdbParseFReplyPacket (Packet, &ErrNo);\r | |
253 | Print ((CHAR16 *)L"RetCode: %x..ErrNo: %x..\n", RetCode, ErrNo);\r | |
254 | \r | |
e7108d0e | 255 | // Send error to the host if there is any.\r |
1e57a462 | 256 | if (ErrNo > 0) {\r |
e7108d0e | 257 | SendError ((UINT8)ErrNo);\r |
1e57a462 | 258 | }\r |
3402aac7 | 259 | \r |
1e57a462 | 260 | return RetCode;\r |
261 | }\r | |
262 | \r | |
1e57a462 | 263 | /**\r |
264 | Reset the serial device.\r | |
265 | \r | |
266 | @param This Protocol instance pointer.\r | |
3402aac7 | 267 | \r |
1e57a462 | 268 | @retval EFI_SUCCESS The device was reset.\r |
269 | @retval EFI_DEVICE_ERROR The serial device could not be reset.\r | |
270 | \r | |
271 | **/\r | |
272 | EFI_STATUS\r | |
273 | EFIAPI\r | |
274 | GdbSerialReset (\r | |
275 | IN EFI_SERIAL_IO_PROTOCOL *This\r | |
276 | )\r | |
277 | {\r | |
278 | return EFI_SUCCESS;\r | |
279 | }\r | |
280 | \r | |
1e57a462 | 281 | /**\r |
c6a72cd7 | 282 | Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,\r |
1e57a462 | 283 | data buts, and stop bits on a serial device.\r |
284 | \r | |
285 | @param This Protocol instance pointer.\r | |
a4037690 | 286 | @param BaudRate The requested baud rate. A BaudRate value of 0 will use the\r |
1e57a462 | 287 | device's default interface speed.\r |
c6a72cd7 | 288 | @param ReceiveFifoDepth The requested depth of the FIFO on the receive side of the\r |
1e57a462 | 289 | serial interface. A ReceiveFifoDepth value of 0 will use\r |
c6a72cd7 | 290 | the device's default FIFO depth.\r |
1e57a462 | 291 | @param Timeout The requested time out for a single character in microseconds.\r |
292 | This timeout applies to both the transmit and receive side of the\r | |
293 | interface. A Timeout value of 0 will use the device's default time\r | |
294 | out value.\r | |
295 | @param Parity The type of parity to use on this serial device. A Parity value of\r | |
296 | DefaultParity will use the device's default parity value.\r | |
297 | @param DataBits The number of data bits to use on the serial device. A DataBits\r | |
c6a72cd7 | 298 | value of 0 will use the device's default data bit setting.\r |
1e57a462 | 299 | @param StopBits The number of stop bits to use on this serial device. A StopBits\r |
300 | value of DefaultStopBits will use the device's default number of\r | |
301 | stop bits.\r | |
302 | \r | |
303 | @retval EFI_SUCCESS The device was reset.\r | |
304 | @retval EFI_DEVICE_ERROR The serial device could not be reset.\r | |
305 | \r | |
306 | **/\r | |
307 | EFI_STATUS\r | |
308 | EFIAPI\r | |
309 | GdbSerialSetAttributes (\r | |
310 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
311 | IN UINT64 BaudRate,\r | |
312 | IN UINT32 ReceiveFifoDepth,\r | |
313 | IN UINT32 Timeout,\r | |
314 | IN EFI_PARITY_TYPE Parity,\r | |
315 | IN UINT8 DataBits,\r | |
316 | IN EFI_STOP_BITS_TYPE StopBits\r | |
317 | )\r | |
318 | {\r | |
319 | return EFI_UNSUPPORTED;\r | |
320 | }\r | |
321 | \r | |
1e57a462 | 322 | /**\r |
323 | Set the control bits on a serial device\r | |
324 | \r | |
325 | @param This Protocol instance pointer.\r | |
326 | @param Control Set the bits of Control that are settable.\r | |
327 | \r | |
328 | @retval EFI_SUCCESS The new control bits were set on the serial device.\r | |
329 | @retval EFI_UNSUPPORTED The serial device does not support this operation.\r | |
330 | @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.\r | |
331 | \r | |
332 | **/\r | |
333 | EFI_STATUS\r | |
334 | EFIAPI\r | |
335 | GdbSerialSetControl (\r | |
336 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
337 | IN UINT32 Control\r | |
338 | )\r | |
339 | {\r | |
340 | return EFI_UNSUPPORTED;\r | |
341 | }\r | |
342 | \r | |
1e57a462 | 343 | /**\r |
c6a72cd7 | 344 | Retrieves the status of the control bits on a serial device\r |
1e57a462 | 345 | \r |
346 | @param This Protocol instance pointer.\r | |
347 | @param Control A pointer to return the current Control signals from the serial device.\r | |
3402aac7 | 348 | \r |
1e57a462 | 349 | @retval EFI_SUCCESS The control bits were read from the serial device.\r |
350 | @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.\r | |
351 | \r | |
352 | **/\r | |
353 | EFI_STATUS\r | |
354 | EFIAPI\r | |
355 | GdbSerialGetControl (\r | |
356 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
357 | OUT UINT32 *Control\r | |
358 | )\r | |
359 | {\r | |
360 | return EFI_UNSUPPORTED;\r | |
361 | }\r | |
362 | \r | |
1e57a462 | 363 | /**\r |
364 | Writes data to a serial device.\r | |
365 | \r | |
366 | @param This Protocol instance pointer.\r | |
367 | @param BufferSize On input, the size of the Buffer. On output, the amount of\r | |
368 | data actually written.\r | |
369 | @param Buffer The buffer of data to write\r | |
370 | \r | |
371 | @retval EFI_SUCCESS The data was written.\r | |
372 | @retval EFI_DEVICE_ERROR The device reported an error.\r | |
373 | @retval EFI_TIMEOUT The data write was stopped due to a timeout.\r | |
374 | \r | |
375 | **/\r | |
376 | EFI_STATUS\r | |
377 | EFIAPI\r | |
378 | GdbSerialWrite (\r | |
379 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
380 | IN OUT UINTN *BufferSize,\r | |
381 | IN VOID *Buffer\r | |
382 | )\r | |
383 | {\r | |
384 | GDB_SERIAL_DEV *SerialDev;\r | |
e7108d0e | 385 | UINTN Return;\r |
1e57a462 | 386 | \r |
387 | SerialDev = GDB_SERIAL_DEV_FROM_THIS (This);\r | |
3402aac7 | 388 | \r |
1e57a462 | 389 | Return = GdbWrite (SerialDev->OutFileDescriptor, Buffer, *BufferSize);\r |
390 | if (Return == (UINTN)-1) {\r | |
391 | return EFI_DEVICE_ERROR;\r | |
392 | }\r | |
3402aac7 | 393 | \r |
1e57a462 | 394 | if (Return != *BufferSize) {\r |
395 | *BufferSize = Return;\r | |
396 | }\r | |
3402aac7 | 397 | \r |
1e57a462 | 398 | return EFI_SUCCESS;\r |
399 | }\r | |
400 | \r | |
401 | /**\r | |
402 | Writes data to a serial device.\r | |
403 | \r | |
404 | @param This Protocol instance pointer.\r | |
405 | @param BufferSize On input, the size of the Buffer. On output, the amount of\r | |
406 | data returned in Buffer.\r | |
407 | @param Buffer The buffer to return the data into.\r | |
408 | \r | |
409 | @retval EFI_SUCCESS The data was read.\r | |
410 | @retval EFI_DEVICE_ERROR The device reported an error.\r | |
411 | @retval EFI_TIMEOUT The data write was stopped due to a timeout.\r | |
412 | \r | |
413 | **/\r | |
1e57a462 | 414 | EFI_STATUS\r |
415 | EFIAPI\r | |
416 | GdbSerialRead (\r | |
417 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
418 | IN OUT UINTN *BufferSize,\r | |
419 | OUT VOID *Buffer\r | |
420 | )\r | |
421 | {\r | |
422 | GDB_SERIAL_DEV *SerialDev;\r | |
e7108d0e | 423 | UINTN Return;\r |
1e57a462 | 424 | \r |
425 | SerialDev = GDB_SERIAL_DEV_FROM_THIS (This);\r | |
3402aac7 | 426 | \r |
1e57a462 | 427 | Return = GdbRead (SerialDev->InFileDescriptor, Buffer, *BufferSize);\r |
428 | if (Return == (UINTN)-1) {\r | |
429 | return EFI_DEVICE_ERROR;\r | |
430 | }\r | |
3402aac7 | 431 | \r |
1e57a462 | 432 | if (Return != *BufferSize) {\r |
433 | *BufferSize = Return;\r | |
434 | }\r | |
3402aac7 | 435 | \r |
1e57a462 | 436 | return EFI_SUCCESS;\r |
437 | }\r | |
438 | \r | |
3402aac7 | 439 | //\r |
c6a72cd7 | 440 | // Template used to initialize the GDB Serial IO protocols\r |
1e57a462 | 441 | //\r |
e7108d0e | 442 | GDB_SERIAL_DEV gdbSerialDevTemplate = {\r |
1e57a462 | 443 | GDB_SERIAL_DEV_SIGNATURE,\r |
444 | NULL,\r | |
3402aac7 | 445 | \r |
1e57a462 | 446 | { // SerialIo\r |
447 | SERIAL_IO_INTERFACE_REVISION,\r | |
448 | GdbSerialReset,\r | |
449 | GdbSerialSetAttributes,\r | |
450 | GdbSerialSetControl,\r | |
451 | GdbSerialGetControl,\r | |
452 | GdbSerialWrite,\r | |
453 | GdbSerialRead,\r | |
454 | NULL\r | |
455 | },\r | |
e7108d0e MK |
456 | { // SerialMode\r |
457 | 0, // ControlMask\r | |
458 | 0, // Timeout\r | |
459 | 0, // BaudRate\r | |
460 | 1, // RceiveFifoDepth\r | |
461 | 0, // DataBits\r | |
462 | 0, // Parity\r | |
463 | 0 // StopBits\r | |
1e57a462 | 464 | },\r |
b0fdce95 | 465 | {\r |
1e57a462 | 466 | {\r |
1e57a462 | 467 | {\r |
b0fdce95 OM |
468 | HARDWARE_DEVICE_PATH,\r |
469 | HW_VENDOR_DP,\r | |
470 | {\r | |
e7108d0e MK |
471 | (UINT8)(sizeof (VENDOR_DEVICE_PATH) + sizeof (UINT32)),\r |
472 | (UINT8)((sizeof (VENDOR_DEVICE_PATH) + sizeof (UINT32)) >> 8)\r | |
b0fdce95 | 473 | },\r |
1e57a462 | 474 | },\r |
b0fdce95 | 475 | EFI_SERIAL_IO_PROTOCOL_GUID\r |
1e57a462 | 476 | },\r |
477 | 0,\r | |
478 | {\r | |
479 | END_DEVICE_PATH_TYPE,\r | |
480 | END_ENTIRE_DEVICE_PATH_SUBTYPE,\r | |
481 | {\r | |
e7108d0e MK |
482 | (UINT8)(sizeof (EFI_DEVICE_PATH_PROTOCOL)),\r |
483 | (UINT8)(sizeof (EFI_DEVICE_PATH_PROTOCOL) >> 8)\r | |
1e57a462 | 484 | }\r |
485 | },\r | |
486 | },\r | |
487 | GDB_STDIN,\r | |
488 | GDB_STDOUT\r | |
489 | };\r | |
490 | \r | |
1e57a462 | 491 | /**\r |
492 | Make two serial consoles: 1) StdIn and StdOut via GDB. 2) StdErr via GDB.\r | |
3402aac7 | 493 | \r |
1e57a462 | 494 | These console show up on the remote system running GDB\r |
495 | \r | |
496 | **/\r | |
497 | VOID\r | |
498 | GdbInitializeSerialConsole (\r | |
499 | VOID\r | |
500 | )\r | |
501 | {\r | |
502 | EFI_STATUS Status;\r | |
503 | GDB_SERIAL_DEV *StdOutSerialDev;\r | |
504 | GDB_SERIAL_DEV *StdErrSerialDev;\r | |
505 | \r | |
506 | // Use the template to make a copy of the Serial Console private data structure.\r | |
e7108d0e | 507 | StdOutSerialDev = AllocateCopyPool (sizeof (GDB_SERIAL_DEV), &gdbSerialDevTemplate);\r |
1e57a462 | 508 | ASSERT (StdOutSerialDev != NULL);\r |
3402aac7 | 509 | \r |
1e57a462 | 510 | // Fixup pointer after the copy\r |
511 | StdOutSerialDev->SerialIo.Mode = &StdOutSerialDev->SerialMode;\r | |
3402aac7 | 512 | \r |
e7108d0e | 513 | StdErrSerialDev = AllocateCopyPool (sizeof (GDB_SERIAL_DEV), &gdbSerialDevTemplate);\r |
1e57a462 | 514 | ASSERT (StdErrSerialDev != NULL);\r |
515 | \r | |
516 | // Fixup pointer and modify stuff that is different for StdError\r | |
e7108d0e MK |
517 | StdErrSerialDev->SerialIo.Mode = &StdErrSerialDev->SerialMode;\r |
518 | StdErrSerialDev->DevicePath.Index = 1;\r | |
1e57a462 | 519 | StdErrSerialDev->OutFileDescriptor = GDB_STDERR;\r |
3402aac7 | 520 | \r |
1e57a462 | 521 | // Make a new handle with Serial IO protocol and its device path on it.\r |
522 | Status = gBS->InstallMultipleProtocolInterfaces (\r | |
3402aac7 | 523 | &StdOutSerialDev->Handle,\r |
e7108d0e MK |
524 | &gEfiSerialIoProtocolGuid,\r |
525 | &StdOutSerialDev->SerialIo,\r | |
526 | &gEfiDevicePathProtocolGuid,\r | |
527 | &StdOutSerialDev->DevicePath,\r | |
1e57a462 | 528 | NULL\r |
529 | );\r | |
530 | ASSERT_EFI_ERROR (Status);\r | |
531 | \r | |
532 | // Make a new handle with Serial IO protocol and its device path on it.\r | |
533 | Status = gBS->InstallMultipleProtocolInterfaces (\r | |
3402aac7 | 534 | &StdErrSerialDev->Handle,\r |
e7108d0e MK |
535 | &gEfiSerialIoProtocolGuid,\r |
536 | &StdErrSerialDev->SerialIo,\r | |
537 | &gEfiDevicePathProtocolGuid,\r | |
538 | &StdErrSerialDev->DevicePath,\r | |
1e57a462 | 539 | NULL\r |
540 | );\r | |
541 | ASSERT_EFI_ERROR (Status);\r | |
542 | }\r |