EmbeddedPkg/MmcDxe: set I/O speed and bus width in SD stack

[mirror_edk2.git] / EmbeddedPkg / Universal / MmcDxe / MmcBlockIo.c

/** @file\r
*\r
*  Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
*\r
*  This program and the accompanying materials\r
*  are licensed and made available under the terms and conditions of the BSD License\r
*  which accompanies this distribution.  The full text of the license may be found at\r
*  http://opensource.org/licenses/bsd-license.php\r
*\r
*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
*\r
**/\r
\r
#include <Library/BaseMemoryLib.h>\r
\r
#include "Mmc.h"\r
\r
EFI_STATUS\r
MmcNotifyState (\r
  IN MMC_HOST_INSTANCE *MmcHostInstance,\r
  IN MMC_STATE State\r
  )\r
{\r
  MmcHostInstance->State = State;\r
  return MmcHostInstance->MmcHost->NotifyState (MmcHostInstance->MmcHost, State);\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcGetCardStatus (\r
  IN MMC_HOST_INSTANCE     *MmcHostInstance\r
  )\r
{\r
  EFI_STATUS              Status;\r
  UINT32                  Response[4];\r
  UINTN                   CmdArg;\r
  EFI_MMC_HOST_PROTOCOL   *MmcHost;\r
\r
  Status = EFI_SUCCESS;\r
  MmcHost = MmcHostInstance->MmcHost;\r
  CmdArg = 0;\r
\r
  if (MmcHost == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (MmcHostInstance->State != MmcHwInitializationState) {\r
    //Get the Status of the card.\r
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);\r
    if (EFI_ERROR (Status)) {\r
      DEBUG ((EFI_D_ERROR, "MmcGetCardStatus(MMC_CMD13): Error and Status = %r\n", Status));\r
      return Status;\r
    }\r
\r
    //Read Response\r
    MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);\r
    PrintResponseR1 (Response[0]);\r
  }\r
\r
  return Status;\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcReset (\r
  IN EFI_BLOCK_IO_PROTOCOL    *This,\r
  IN BOOLEAN                  ExtendedVerification\r
  )\r
{\r
  MMC_HOST_INSTANCE       *MmcHostInstance;\r
\r
  MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);\r
\r
  if (MmcHostInstance->MmcHost == NULL) {\r
    // Nothing to do\r
    return EFI_SUCCESS;\r
  }\r
\r
  // If a card is not present then clear all media settings\r
  if (!MmcHostInstance->MmcHost->IsCardPresent (MmcHostInstance->MmcHost)) {\r
    MmcHostInstance->BlockIo.Media->MediaPresent = FALSE;\r
    MmcHostInstance->BlockIo.Media->LastBlock    = 0;\r
    MmcHostInstance->BlockIo.Media->BlockSize    = 512;  // Should be zero but there is a bug in DiskIo\r
    MmcHostInstance->BlockIo.Media->ReadOnly     = FALSE;\r
\r
    // Indicate that the driver requires initialization\r
    MmcHostInstance->State = MmcHwInitializationState;\r
\r
    return EFI_SUCCESS;\r
  }\r
\r
  // Implement me. Either send a CMD0 (could not work for some MMC host) or just turn off/turn\r
  //      on power and restart Identification mode\r
  return EFI_SUCCESS;\r
}\r
\r
EFI_STATUS\r
MmcDetectCard (\r
  EFI_MMC_HOST_PROTOCOL     *MmcHost\r
  )\r
{\r
  if (!MmcHost->IsCardPresent (MmcHost)) {\r
    return EFI_NO_MEDIA;\r
  } else {\r
    return EFI_SUCCESS;\r
  }\r
}\r
\r
EFI_STATUS\r
MmcStopTransmission (\r
  EFI_MMC_HOST_PROTOCOL     *MmcHost\r
  )\r
{\r
  EFI_STATUS              Status;\r
  UINT32                  Response[4];\r
  // Command 12 - Stop transmission (ends read or write)\r
  // Normally only needed for streaming transfers or after error.\r
  Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);\r
  if (!EFI_ERROR (Status)) {\r
    MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1b, Response);\r
  }\r
  return Status;\r
}\r
\r
#define MMCI0_BLOCKLEN 512\r
#define MMCI0_TIMEOUT  10000\r
\r
EFI_STATUS\r
MmcIoBlocks (\r
  IN EFI_BLOCK_IO_PROTOCOL    *This,\r
  IN UINTN                    Transfer,\r
  IN UINT32                   MediaId,\r
  IN EFI_LBA                  Lba,\r
  IN UINTN                    BufferSize,\r
  OUT VOID                    *Buffer\r
  )\r
{\r
  UINT32                  Response[4];\r
  EFI_STATUS              Status;\r
  UINTN                   CmdArg;\r
  INTN                    Timeout;\r
  UINTN                   Cmd;\r
  MMC_HOST_INSTANCE       *MmcHostInstance;\r
  EFI_MMC_HOST_PROTOCOL   *MmcHost;\r
  UINTN                   BytesRemainingToBeTransfered;\r
  UINTN                   BlockCount;\r
\r
  BlockCount = 1;\r
  MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);\r
  ASSERT (MmcHostInstance != NULL);\r
  MmcHost = MmcHostInstance->MmcHost;\r
  ASSERT (MmcHost);\r
\r
  if (This->Media->MediaId != MediaId) {\r
    return EFI_MEDIA_CHANGED;\r
  }\r
\r
  if ((MmcHost == NULL) || (Buffer == NULL)) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  // Check if a Card is Present\r
  if (!MmcHostInstance->BlockIo.Media->MediaPresent) {\r
    return EFI_NO_MEDIA;\r
  }\r
\r
  // All blocks must be within the device\r
  if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  if ((Transfer == MMC_IOBLOCKS_WRITE) && (This->Media->ReadOnly == TRUE)) {\r
    return EFI_WRITE_PROTECTED;\r
  }\r
\r
  // Reading 0 Byte is valid\r
  if (BufferSize == 0) {\r
    return EFI_SUCCESS;\r
  }\r
\r
  // The buffer size must be an exact multiple of the block size\r
  if ((BufferSize % This->Media->BlockSize) != 0) {\r
    return EFI_BAD_BUFFER_SIZE;\r
  }\r
\r
  // Check the alignment\r
  if ((This->Media->IoAlign > 2) && (((UINTN)Buffer & (This->Media->IoAlign - 1)) != 0)) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  BytesRemainingToBeTransfered = BufferSize;\r
  while (BytesRemainingToBeTransfered > 0) {\r
\r
    // Check if the Card is in Ready status\r
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
    Response[0] = 0;\r
    Timeout = 20;\r
    while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))\r
          && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)\r
          && Timeout--) {\r
      Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);\r
      if (!EFI_ERROR (Status)) {\r
        MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);\r
      }\r
    }\r
\r
    if (0 == Timeout) {\r
      DEBUG ((EFI_D_ERROR, "The Card is busy\n"));\r
      return EFI_NOT_READY;\r
    }\r
\r
    //Set command argument based on the card access mode (Byte mode or Block mode)\r
    if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {\r
      CmdArg = Lba;\r
    } else {\r
      CmdArg = Lba * This->Media->BlockSize;\r
    }\r
\r
    if (Transfer == MMC_IOBLOCKS_READ) {\r
      // Read a single block\r
      Cmd = MMC_CMD17;\r
    } else {\r
      // Write a single block\r
      Cmd = MMC_CMD24;\r
    }\r
    Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);\r
    if (EFI_ERROR (Status)) {\r
      DEBUG ((EFI_D_ERROR, "MmcIoBlocks(MMC_CMD%d): Error %r\n", Cmd, Status));\r
      return Status;\r
    }\r
\r
    if (Transfer == MMC_IOBLOCKS_READ) {\r
      // Read one block of Data\r
      Status = MmcHost->ReadBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);\r
      if (EFI_ERROR (Status)) {\r
        DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Read Block Data and Status = %r\n", Status));\r
        MmcStopTransmission (MmcHost);\r
        return Status;\r
      }\r
      Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);\r
      if (EFI_ERROR (Status)) {\r
        DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcProgrammingState\n"));\r
        return Status;\r
      }\r
    } else {\r
      // Write one block of Data\r
      Status = MmcHost->WriteBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);\r
      if (EFI_ERROR (Status)) {\r
        DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Write Block Data and Status = %r\n", Status));\r
        MmcStopTransmission (MmcHost);\r
        return Status;\r
      }\r
    }\r
\r
    // Command 13 - Read status and wait for programming to complete (return to tran)\r
    Timeout = MMCI0_TIMEOUT;\r
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
    Response[0] = 0;\r
    while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))\r
          && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)\r
          && Timeout--) {\r
      Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);\r
      if (!EFI_ERROR (Status)) {\r
        MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);\r
        if ((Response[0] & MMC_R0_READY_FOR_DATA)) {\r
          break;  // Prevents delay once finished\r
        }\r
      }\r
      gBS->Stall (1);\r
    }\r
\r
    Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
    if (EFI_ERROR (Status)) {\r
      DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));\r
      return Status;\r
    }\r
\r
    BytesRemainingToBeTransfered -= This->Media->BlockSize;\r
    Lba    += BlockCount;\r
    Buffer = (UINT8 *)Buffer + This->Media->BlockSize;\r
  }\r
\r
  return EFI_SUCCESS;\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcReadBlocks (\r
  IN EFI_BLOCK_IO_PROTOCOL    *This,\r
  IN UINT32                   MediaId,\r
  IN EFI_LBA                  Lba,\r
  IN UINTN                    BufferSize,\r
  OUT VOID                    *Buffer\r
  )\r
{\r
  return MmcIoBlocks (This, MMC_IOBLOCKS_READ, MediaId, Lba, BufferSize, Buffer);\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcWriteBlocks (\r
  IN EFI_BLOCK_IO_PROTOCOL    *This,\r
  IN UINT32                   MediaId,\r
  IN EFI_LBA                  Lba,\r
  IN UINTN                    BufferSize,\r
  IN VOID                     *Buffer\r
  )\r
{\r
  return MmcIoBlocks (This, MMC_IOBLOCKS_WRITE, MediaId, Lba, BufferSize, Buffer);\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcFlushBlocks (\r
  IN EFI_BLOCK_IO_PROTOCOL  *This\r
  )\r
{\r
  return EFI_SUCCESS;\r
}\r