Modules cleanup.

[mirror_edk2.git] / MdeModulePkg / Bus / Pci / UhciDxe / UhciReg.h

/** @file\r
\r
Copyright (c) 2007, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
Module Name:\r
\r
  UhciReg.h\r
\r
Abstract:\r
\r
  The definition for UHCI register operation routines.\r
\r
Revision History\r
\r
\r
**/\r
\r
#ifndef _EFI_UHCI_REG_H_\r
#define _EFI_UHCI_REG_H_\r
\r
#define BIT(a)  (1 << (a))\r
\r
enum {\r
  UHCI_FRAME_NUM        = 1024,\r
\r
  //\r
  // Register offset and PCI related staff\r
  //\r
  CLASSC_OFFSET         = 0x09,\r
  USBBASE_OFFSET        = 0x20,\r
  USB_BAR_INDEX         = 4,\r
  PCI_CLASSC_PI_UHCI    = 0x00,\r
\r
  USBCMD_OFFSET         = 0,\r
  USBSTS_OFFSET         = 2,\r
  USBINTR_OFFSET        = 4,\r
  USBPORTSC_OFFSET      = 0x10,\r
  USB_FRAME_NO_OFFSET   = 6,\r
  USB_FRAME_BASE_OFFSET = 8,\r
  USB_EMULATION_OFFSET  = 0xC0,\r
\r
  //\r
  // Packet IDs\r
  //\r
  SETUP_PACKET_ID       = 0x2D,\r
  INPUT_PACKET_ID       = 0x69,\r
  OUTPUT_PACKET_ID      = 0xE1,\r
  ERROR_PACKET_ID       = 0x55,\r
\r
  //\r
  // USB port status and control bit definition.\r
  //\r
  USBPORTSC_CCS         = BIT(0),  // Current Connect Status\r
  USBPORTSC_CSC         = BIT(1),  // Connect Status Change\r
  USBPORTSC_PED         = BIT(2),  // Port Enable / Disable\r
  USBPORTSC_PEDC        = BIT(3),  // Port Enable / Disable Change\r
  USBPORTSC_LSL         = BIT(4),  // Line Status Low BIT\r
  USBPORTSC_LSH         = BIT(5),  // Line Status High BIT\r
  USBPORTSC_RD          = BIT(6),  // Resume Detect\r
  USBPORTSC_LSDA        = BIT(8),  // Low Speed Device Attached\r
  USBPORTSC_PR          = BIT(9),  // Port Reset\r
  USBPORTSC_SUSP        = BIT(12), // Suspend\r
\r
  USB_MAX_ROOTHUB_PORT  = 0x0F,    // Max number of root hub port\r
\r
  //\r
  // Command register bit definitions\r
  //\r
  USBCMD_RS             = BIT(0),  // Run/Stop\r
  USBCMD_HCRESET        = BIT(1),  // Host reset\r
  USBCMD_GRESET         = BIT(2),  // Global reset\r
  USBCMD_EGSM           = BIT(3),  // Global Suspend Mode\r
  USBCMD_FGR            = BIT(4),  // Force Global Resume\r
  USBCMD_SWDBG          = BIT(5),  // SW Debug mode\r
  USBCMD_CF             = BIT(6),  // Config Flag (sw only)\r
  USBCMD_MAXP           = BIT(7),  // Max Packet (0 = 32, 1 = 64)\r
\r
  //\r
  // USB Status register bit definitions\r
  //\r
  USBSTS_USBINT         = BIT(0),  // Interrupt due to IOC\r
  USBSTS_ERROR          = BIT(1),  // Interrupt due to error\r
  USBSTS_RD             = BIT(2),  // Resume Detect\r
  USBSTS_HSE            = BIT(3),  // Host System Error\r
  USBSTS_HCPE           = BIT(4),  // Host Controller Process Error\r
  USBSTS_HCH            = BIT(5),  // HC Halted\r
\r
  USBTD_ACTIVE          = BIT(7),  // TD is still active\r
  USBTD_STALLED         = BIT(6),  // TD is stalled\r
  USBTD_BUFFERR         = BIT(5),  // Buffer underflow or overflow\r
  USBTD_BABBLE          = BIT(4),  // Babble condition\r
  USBTD_NAK             = BIT(3),  // NAK is received\r
  USBTD_CRC             = BIT(2),  // CRC/Time out error\r
  USBTD_BITSTUFF        = BIT(1),  // Bit stuff error\r
};\r
\r
\r
/**\r
  Read a UHCI register\r
\r
  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use\r
  @param  Offset       Register offset to USB_BAR_INDEX\r
\r
  @return Content of register\r
\r
**/\r
UINT16\r
UhciReadReg (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo,\r
  IN UINT32                  Offset\r
  )\r
;\r
\r
\r
\r
/**\r
  Write data to UHCI register\r
\r
  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use\r
  @param  Offset       Register offset to USB_BAR_INDEX\r
  @param  Data         Data to write\r
\r
  @return VOID\r
\r
**/\r
VOID\r
UhciWriteReg (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo,\r
  IN UINT32                  Offset,\r
  IN UINT16                  Data\r
  )\r
;\r
\r
\r
\r
/**\r
  Set a bit of the UHCI Register\r
\r
  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use\r
  @param  Offset       Register offset to USB_BAR_INDEX\r
  @param  Bit          The bit to set\r
\r
  @return None\r
\r
**/\r
VOID\r
UhciSetRegBit (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo,\r
  IN UINT32                  Offset,\r
  IN UINT16                  Bit\r
  )\r
;\r
\r
\r
\r
/**\r
  Clear a bit of the UHCI Register\r
\r
  @param  PciIo        The PCI_IO protocol to access the PCI\r
  @param  Offset       Register offset to USB_BAR_INDEX\r
  @param  Bit          The bit to clear\r
\r
  @return None\r
\r
**/\r
VOID\r
UhciClearRegBit (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo,\r
  IN UINT32                  Offset,\r
  IN UINT16                  Bit\r
  )\r
;\r
\r
\r
/**\r
  Clear all the interrutp status bits, these bits\r
  are Write-Clean\r
\r
  @param  Uhc          The UHCI device\r
\r
  @return None\r
\r
**/\r
VOID\r
UhciAckAllInterrupt (\r
  IN  USB_HC_DEV          *Uhc\r
  )\r
;\r
\r
\r
/**\r
  Stop the host controller\r
\r
  @param  Uhc          The UHCI device\r
  @param  Timeout      Max time allowed\r
\r
  @retval EFI_SUCCESS  The host controller is stopped\r
  @retval EFI_TIMEOUT  Failed to stop the host controller\r
\r
**/\r
EFI_STATUS\r
UhciStopHc (\r
  IN USB_HC_DEV         *Uhc,\r
  IN UINTN              Timeout\r
  )\r
;\r
\r
\r
\r
/**\r
  Check whether the host controller operates well\r
\r
  @param  PciIo        The PCI_IO protocol to use\r
\r
  @retval TRUE         Host controller is working\r
  @retval FALSE        Host controller is halted or system error\r
\r
**/\r
BOOLEAN\r
UhciIsHcWorking (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo\r
  )\r
;\r
\r
\r
/**\r
  Set the UHCI frame list base address. It can't use\r
  UhciWriteReg which access memory in UINT16.\r
\r
  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use\r
  @param  Addr         Address to set\r
\r
  @return VOID\r
\r
**/\r
VOID\r
UhciSetFrameListBaseAddr (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo,\r
  IN VOID                    *Addr\r
  )\r
;\r
\r
\r
/**\r
  Disable USB Emulation\r
\r
  @param  PciIo        The EFI_PCI_IO_PROTOCOL protocol to use\r
\r
  @return VOID\r
\r
**/\r
VOID\r
UhciTurnOffUsbEmulation (\r
  IN EFI_PCI_IO_PROTOCOL     *PciIo\r
  )\r
;\r
#endif\r