Clean up to update the reference of the these macros:

[mirror_edk2.git] / MdeModulePkg / Bus / Pci / UhciDxe / UhciSched.h

/** @file\r
\r
  The definition for EHCI register operation routines.\r
\r
Copyright (c) 2007, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#ifndef _EFI_UHCI_SCHED_H_\r
#define _EFI_UHCI_SCHED_H_\r
\r
\r
typedef enum {\r
  UHCI_ASYNC_INT_SIGNATURE = SIGNATURE_32 ('u', 'h', 'c', 'a'),\r
\r
  //\r
  // The failure mask for USB transfer return status. If any of\r
  // these bit is set, the transfer failed. EFI_USB_ERR_NOEXECUTE\r
  // and EFI_USB_ERR_NAK are not considered as error condition:\r
  // the transfer is still going on.\r
  //\r
  USB_ERR_FAIL_MASK = EFI_USB_ERR_STALL   | EFI_USB_ERR_BUFFER |\r
                      EFI_USB_ERR_BABBLE  | EFI_USB_ERR_CRC    |\r
                      EFI_USB_ERR_TIMEOUT | EFI_USB_ERR_BITSTUFF |\r
                      EFI_USB_ERR_SYSTEM\r
\r
}UHCI_ERR_FAIL_MASK;\r
\r
//\r
// Structure to return the result of UHCI QH execution.\r
// Result is the final result of the QH's QTD. NextToggle\r
// is the next data toggle to use. Complete is the actual\r
// length of data transferred.\r
//\r
typedef struct {\r
  UINT32                  Result;\r
  UINT8                   NextToggle;\r
  UINTN                   Complete;\r
} UHCI_QH_RESULT;\r
\r
typedef struct _UHCI_ASYNC_REQUEST  UHCI_ASYNC_REQUEST;\r
\r
//\r
// Structure used to manager the asynchronous interrupt transfers.\r
//\r
struct _UHCI_ASYNC_REQUEST{\r
  UINTN                           Signature;\r
  LIST_ENTRY                      Link;\r
  UHCI_ASYNC_REQUEST              *Recycle;\r
\r
  //\r
  // Endpoint attributes\r
  //\r
  UINT8                           DevAddr;\r
  UINT8                           EndPoint;\r
  BOOLEAN                         IsLow;\r
  UINTN                           Interval;\r
\r
  //\r
  // Data and UHC structures\r
  //\r
  UHCI_QH_SW                      *QhSw;\r
  UHCI_TD_SW                      *FirstTd;\r
  UINT8                           *Data;      // Allocated host memory, not mapped memory\r
  UINTN                           DataLen;\r
  VOID                            *Mapping;\r
\r
  //\r
  // User callback and its context\r
  //\r
  EFI_ASYNC_USB_TRANSFER_CALLBACK Callback;\r
  VOID                            *Context;\r
};\r
\r
#define UHCI_ASYNC_INT_FROM_LINK(a) \\r
          CR (a, UHCI_ASYNC_REQUEST, Link, UHCI_ASYNC_INT_SIGNATURE)\r
\r
\r
/**\r
  Create Frame List Structure.\r
\r
  @param  Uhc                    The UHCI device.\r
\r
  @return EFI_OUT_OF_RESOURCES   Can't allocate memory resources.\r
  @return EFI_UNSUPPORTED        Map memory fail.\r
  @return EFI_SUCCESS            Success.\r
\r
**/\r
EFI_STATUS\r
UhciInitFrameList (\r
  IN USB_HC_DEV         *Uhc\r
  );\r
\r
/**\r
  Destory FrameList buffer.\r
\r
  @param  Uhc                    The UHCI device.\r
\r
  @return None.\r
\r
**/\r
VOID\r
UhciDestoryFrameList (\r
  IN USB_HC_DEV           *Uhc\r
  );\r
\r
\r
/**\r
  Convert the poll rate to the maxium 2^n that is smaller\r
  than Interval.\r
\r
  @param  Interval               The poll rate to convert.\r
\r
  @return The converted poll rate.\r
\r
**/\r
UINTN\r
UhciConvertPollRate (\r
  IN  UINTN               Interval\r
  );\r
\r
\r
/**\r
  Link a queue head (for asynchronous interrupt transfer) to\r
  the frame list.\r
\r
  @param  FrameBase              The base of the frame list.\r
  @param  Qh                     The queue head to link into.\r
\r
  @return None.\r
\r
**/\r
VOID\r
UhciLinkQhToFrameList (\r
  UINT32                  *FrameBase,\r
  UHCI_QH_SW              *Qh\r
  );\r
\r
\r
/**\r
  Unlink QH from the frame list is easier: find all\r
  the precedence node, and pointer there next to QhSw's\r
  next.\r
\r
  @param  FrameBase              The base address of the frame list.\r
  @param  Qh                     The queue head to unlink.\r
\r
  @return None.\r
\r
**/\r
VOID\r
UhciUnlinkQhFromFrameList (\r
  UINT32                *FrameBase,\r
  UHCI_QH_SW            *Qh\r
  );\r
\r
\r
/**\r
  Check the result of the transfer.\r
\r
  @param  Uhc                    The UHCI device.\r
  @param  Qh                     The queue head of the transfer.\r
  @param  Td                     The first TDs of the transfer.\r
  @param  TimeOut                TimeOut value in milliseconds.\r
  @param  IsLow                  Is Low Speed Device.\r
  @param  QhResult               The variable to return result.\r
\r
  @retval EFI_SUCCESS            The transfer finished with success.\r
  @retval EFI_DEVICE_ERROR       Transfer failed.\r
\r
**/\r
EFI_STATUS\r
UhciExecuteTransfer (\r
  IN  USB_HC_DEV          *Uhc,\r
  IN  UHCI_QH_SW          *Qh,\r
  IN  UHCI_TD_SW          *Td,\r
  IN  UINTN               TimeOut,\r
  IN  BOOLEAN             IsLow,\r
  OUT UHCI_QH_RESULT      *QhResult\r
  );\r
\r
\r
/**\r
  Create Async Request node, and Link to List.\r
\r
  @param  Uhc                    The UHCI device.\r
  @param  Qh                     The queue head of the transfer.\r
  @param  FirstTd                First TD of the transfer.\r
  @param  DevAddr                Device Address.\r
  @param  EndPoint               EndPoint Address.\r
  @param  DataLen                Data length.\r
  @param  Interval               Polling Interval when inserted to frame list.\r
  @param  Mapping                Mapping value.\r
  @param  Data                   Data buffer, unmapped.\r
  @param  Callback               Callback after interrupt transfeer.\r
  @param  Context                Callback Context passed as function parameter.\r
  @param  IsLow                  Is Low Speed.\r
\r
  @retval EFI_SUCCESS            An asynchronous transfer is created.\r
  @retval EFI_INVALID_PARAMETER  Paremeter is error.\r
  @retval EFI_OUT_OF_RESOURCES   Failed because of resource shortage.\r
\r
**/\r
EFI_STATUS\r
UhciCreateAsyncReq (\r
  IN USB_HC_DEV                       *Uhc,\r
  IN UHCI_QH_SW                       *Qh,\r
  IN UHCI_TD_SW                       *FirstTd,\r
  IN UINT8                            DevAddr,\r
  IN UINT8                            EndPoint,\r
  IN UINTN                            DataLen,\r
  IN UINTN                            Interval,\r
  IN VOID                             *Mapping,\r
  IN UINT8                            *Data,\r
  IN EFI_ASYNC_USB_TRANSFER_CALLBACK  Callback,\r
  IN VOID                             *Context,\r
  IN BOOLEAN                          IsLow\r
  );\r
\r
\r
/**\r
  Delete Async Interrupt QH and TDs.\r
\r
  @param  Uhc                    The UHCI device.\r
  @param  DevAddr                Device Address.\r
  @param  EndPoint               EndPoint Address.\r
  @param  Toggle                 The next data toggle to use.\r
\r
  @retval EFI_SUCCESS            The request is deleted.\r
  @retval EFI_INVALID_PARAMETER  Paremeter is error.\r
  @retval EFI_NOT_FOUND          The asynchronous isn't found.\r
\r
**/\r
EFI_STATUS\r
UhciRemoveAsyncReq (\r
  IN  USB_HC_DEV          *Uhc,\r
  IN  UINT8               DevAddr,\r
  IN  UINT8               EndPoint,\r
  OUT UINT8               *Toggle\r
  );\r
\r
\r
/**\r
  Release all the asynchronous transfers on the lsit.\r
\r
  @param  Uhc                    The UHCI device.\r
\r
  @return None.\r
\r
**/\r
VOID\r
UhciFreeAllAsyncReq (\r
  IN USB_HC_DEV           *Uhc\r
  );\r
\r
\r
/**\r
  Interrupt transfer periodic check handler.\r
\r
  @param  Event                  The event of the time.\r
  @param  Context                Context of the event, pointer to USB_HC_DEV.\r
\r
  @return None.\r
\r
**/\r
VOID\r
UhciMonitorAsyncReqList (\r
  IN EFI_EVENT            Event,\r
  IN VOID                 *Context\r
  );\r
\r
#endif\r