[mirror_edk2.git] / MdeModulePkg / Bus / Scsi / ScsiBusDxe / ScsiBus.c

/** @file\r
  SCSI Bus driver that layers on every SCSI Pass Thru and\r
  Extended SCSI Pass Thru protocol in the system.\r
\r
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
\r
#include "ScsiBus.h"\r
\r
\r
EFI_DRIVER_BINDING_PROTOCOL gSCSIBusDriverBinding = {\r
  SCSIBusDriverBindingSupported,\r
  SCSIBusDriverBindingStart,\r
  SCSIBusDriverBindingStop,\r
  0xa,\r
  NULL,\r
  NULL\r
};\r
\r
VOID  *mWorkingBuffer;\r
\r
/**\r
  Convert EFI_SCSI_IO_SCSI_REQUEST_PACKET packet to EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet.\r
\r
  @param  Packet         The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET\r
  @param  CommandPacket  The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiioToPassThruPacket (\r
  IN      EFI_SCSI_IO_SCSI_REQUEST_PACKET         *Packet,\r
  OUT     EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *CommandPacket\r
  );\r
\r
/**\r
  Convert EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet to EFI_SCSI_IO_SCSI_REQUEST_PACKET packet.\r
\r
  @param  ScsiPacket  The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET\r
  @param  Packet      The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
PassThruToScsiioPacket (\r
  IN     EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *ScsiPacket,\r
  OUT    EFI_SCSI_IO_SCSI_REQUEST_PACKET         *Packet\r
  );\r
\r
/**\r
  Notify Function in which convert EFI1.0 PassThru Packet back to UEF2.0\r
  SCSI IO Packet.\r
\r
  @param  Event    The instance of EFI_EVENT.\r
  @param  Context  The parameter passed in.\r
\r
**/\r
VOID\r
EFIAPI\r
NotifyFunction (\r
  IN  EFI_EVENT  Event,\r
  IN  VOID       *Context\r
  );\r
\r
/**\r
  Allocates an aligned buffer for SCSI device.\r
\r
  This function allocates an aligned buffer for the SCSI device to perform\r
  SCSI pass through operations. The alignment requirement is from SCSI pass\r
  through interface.\r
\r
  @param  ScsiIoDevice      The SCSI child device involved for the operation.\r
  @param  BufferSize        The request buffer size.\r
\r
  @return A pointer to the aligned buffer or NULL if the allocation fails.\r
\r
**/\r
VOID *\r
AllocateAlignedBuffer (\r
  IN SCSI_IO_DEV              *ScsiIoDevice,\r
  IN UINTN                    BufferSize\r
  )\r
{\r
  return AllocateAlignedPages (EFI_SIZE_TO_PAGES (BufferSize), ScsiIoDevice->ScsiIo.IoAlign);\r
}\r
\r
/**\r
  Frees an aligned buffer for SCSI device.\r
\r
  This function frees an aligned buffer for the SCSI device to perform\r
  SCSI pass through operations.\r
\r
  @param  Buffer            The aligned buffer to be freed.\r
  @param  BufferSize        The request buffer size.\r
\r
**/\r
VOID\r
FreeAlignedBuffer (\r
  IN VOID                     *Buffer,\r
  IN UINTN                    BufferSize\r
  )\r
{\r
  if (Buffer != NULL) {\r
    FreeAlignedPages (Buffer, EFI_SIZE_TO_PAGES (BufferSize));\r
  }\r
}\r
\r
/**\r
  The user Entry Point for module ScsiBus. The user code starts with this function.\r
\r
  @param  ImageHandle    The firmware allocated handle for the EFI image.\r
  @param  SystemTable    A pointer to the EFI System Table.\r
\r
  @retval EFI_SUCCESS    The entry point is executed successfully.\r
  @retval other          Some error occurs when executing this entry point.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
InitializeScsiBus(\r
  IN EFI_HANDLE           ImageHandle,\r
  IN EFI_SYSTEM_TABLE     *SystemTable\r
  )\r
{\r
  EFI_STATUS              Status;\r
\r
  //\r
  // Install driver model protocol(s).\r
  //\r
  Status = EfiLibInstallDriverBindingComponentName2 (\r
             ImageHandle,\r
             SystemTable,\r
             &gSCSIBusDriverBinding,\r
             ImageHandle,\r
             &gScsiBusComponentName,\r
             &gScsiBusComponentName2\r
             );\r
  ASSERT_EFI_ERROR (Status);\r
\r
  return Status;\r
}\r
\r
\r
/**\r
  Test to see if this driver supports ControllerHandle.\r
\r
  This service is called by the EFI boot service ConnectController(). In order\r
  to make drivers as small as possible, there are a few calling restrictions for\r
  this service. ConnectController() must follow these calling restrictions. If\r
  any other agent wishes to call Supported() it must also follow these calling\r
  restrictions.\r
\r
  @param  This                Protocol instance pointer.\r
  @param  ControllerHandle    Handle of device to test\r
  @param  RemainingDevicePath Optional parameter use to pick a specific child\r
                              device to start.\r
\r
  @retval EFI_SUCCESS         This driver supports this device\r
  @retval EFI_ALREADY_STARTED This driver is already running on this device\r
  @retval other               This driver does not support this device\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SCSIBusDriverBindingSupported (\r
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,\r
  IN EFI_HANDLE                   Controller,\r
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath\r
  )\r
{\r
  EFI_STATUS                      Status;\r
  EFI_SCSI_PASS_THRU_PROTOCOL     *PassThru;\r
  EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtPassThru;\r
  UINT64                          Lun;\r
  UINT8                           *TargetId;\r
  SCSI_TARGET_ID                  ScsiTargetId;\r
\r
  TargetId = &ScsiTargetId.ScsiId.ExtScsi[0];\r
  SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);\r
\r
  //\r
  // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as \r
  // EFI PassThru Protocol. From priority perspective, ExtPassThru Protocol is firstly\r
  // tried to open on host controller handle. If fails, then PassThru Protocol is tried instead.\r
  //\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiExtScsiPassThruProtocolGuid,\r
                  (VOID **)&ExtPassThru,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_BY_DRIVER\r
                  );\r
\r
  if (Status == EFI_ALREADY_STARTED) {\r
    return EFI_SUCCESS;\r
  } else if (!EFI_ERROR(Status)) {\r
    //\r
    // Check if RemainingDevicePath is NULL or the End of Device Path Node,\r
    // if yes, return EFI_SUCCESS.\r
    //\r
    if ((RemainingDevicePath == NULL) || IsDevicePathEnd (RemainingDevicePath)) {\r
      //\r
      // Close protocol regardless of RemainingDevicePath validation\r
      //\r
      gBS->CloseProtocol (\r
             Controller,\r
             &gEfiExtScsiPassThruProtocolGuid,\r
             This->DriverBindingHandle,\r
             Controller\r
             );      \r
      return EFI_SUCCESS;\r
    } else {\r
      //\r
      // If RemainingDevicePath isn't the End of Device Path Node, check its validation\r
      //\r
      Status = ExtPassThru->GetTargetLun (ExtPassThru, RemainingDevicePath, &TargetId, &Lun);\r
      //\r
      // Close protocol regardless of RemainingDevicePath validation\r
      //\r
      gBS->CloseProtocol (\r
             Controller,\r
             &gEfiExtScsiPassThruProtocolGuid,\r
             This->DriverBindingHandle,\r
             Controller\r
             );      \r
      if (!EFI_ERROR(Status)) {\r
        return EFI_SUCCESS;\r
      }\r
    }\r
  }\r
\r
  //\r
  // Come here in 2 condition: \r
  // 1. ExtPassThru doesn't exist.\r
  // 2. ExtPassThru exists but RemainingDevicePath is invalid.\r
  //\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiScsiPassThruProtocolGuid,\r
                  (VOID **)&PassThru,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_BY_DRIVER\r
                  );\r
  \r
  if (Status == EFI_ALREADY_STARTED) {\r
    return EFI_SUCCESS;\r
  }\r
  \r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
  \r
  //\r
  // Test RemainingDevicePath is valid or not.\r
  //\r
  if ((RemainingDevicePath != NULL) && !IsDevicePathEnd (RemainingDevicePath)) {\r
    Status = PassThru->GetTargetLun (PassThru, RemainingDevicePath, &ScsiTargetId.ScsiId.Scsi, &Lun);\r
  }\r
  \r
  gBS->CloseProtocol (\r
         Controller,\r
         &gEfiScsiPassThruProtocolGuid,\r
         This->DriverBindingHandle,\r
         Controller\r
         );\r
  return Status;\r
}\r
\r
\r
/**\r
  Start this driver on ControllerHandle.\r
\r
  This service is called by the EFI boot service ConnectController(). In order\r
  to make drivers as small as possible, there are a few calling restrictions for\r
  this service. ConnectController() must follow these calling restrictions. If\r
  any other agent wishes to call Start() it must also follow these calling\r
  restrictions.\r
\r
  @param  This                 Protocol instance pointer.\r
  @param  ControllerHandle     Handle of device to bind driver to\r
  @param  RemainingDevicePath  Optional parameter use to pick a specific child\r
                               device to start.\r
\r
  @retval EFI_SUCCESS          This driver is added to ControllerHandle\r
  @retval EFI_ALREADY_STARTED  This driver is already running on ControllerHandle\r
  @retval other                This driver does not support this device\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SCSIBusDriverBindingStart (\r
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,\r
  IN EFI_HANDLE                   Controller,\r
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath\r
  )\r
{\r
  UINT64                                Lun;\r
  UINT8                                 *TargetId;\r
  BOOLEAN                               ScanOtherPuns;\r
  BOOLEAN                               FromFirstTarget;\r
  BOOLEAN                               ExtScsiSupport;\r
  EFI_STATUS                            Status;\r
  EFI_STATUS                            DevicePathStatus;\r
  EFI_STATUS                            PassThruStatus;\r
  SCSI_BUS_DEVICE                       *ScsiBusDev;\r
  SCSI_TARGET_ID                        ScsiTargetId;\r
  EFI_DEVICE_PATH_PROTOCOL              *ParentDevicePath;\r
  EFI_SCSI_PASS_THRU_PROTOCOL           *ScsiInterface;\r
  EFI_EXT_SCSI_PASS_THRU_PROTOCOL       *ExtScsiInterface;\r
  EFI_SCSI_BUS_PROTOCOL                 *BusIdentify;\r
\r
  TargetId        = NULL;\r
  ScanOtherPuns   = TRUE;\r
  FromFirstTarget = FALSE;\r
  ExtScsiSupport  = FALSE;\r
  PassThruStatus  = EFI_SUCCESS;\r
  \r
  TargetId = &ScsiTargetId.ScsiId.ExtScsi[0];\r
  SetMem (TargetId, TARGET_MAX_BYTES, 0xFF);\r
  \r
  DevicePathStatus = gBS->OpenProtocol (\r
                            Controller,\r
                            &gEfiDevicePathProtocolGuid,\r
                            (VOID **) &ParentDevicePath,\r
                            This->DriverBindingHandle,\r
                            Controller,\r
                            EFI_OPEN_PROTOCOL_BY_DRIVER\r
                            );\r
  if (EFI_ERROR (DevicePathStatus) && (DevicePathStatus != EFI_ALREADY_STARTED)) {\r
    return DevicePathStatus;\r
  }\r
\r
  //\r
  // Report Status Code to indicate SCSI bus starts\r
  //\r
  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
    EFI_PROGRESS_CODE,\r
    (EFI_IO_BUS_SCSI | EFI_IOB_PC_INIT),\r
    ParentDevicePath\r
    );  \r
\r
  //\r
  // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as \r
  // EFI PassThru Protocol. From priority perspective, ExtPassThru Protocol is firstly\r
  // tried to open on host controller handle. If fails, then PassThru Protocol is tried instead.\r
  //\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiExtScsiPassThruProtocolGuid,\r
                  (VOID **) &ExtScsiInterface,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_BY_DRIVER\r
                  );\r
  //\r
  // Fail to open UEFI ExtendPassThru Protocol, then try to open EFI PassThru Protocol instead.\r
  //\r
  if (EFI_ERROR(Status) && (Status != EFI_ALREADY_STARTED)) {\r
    Status = gBS->OpenProtocol (\r
                    Controller,\r
                    &gEfiScsiPassThruProtocolGuid,\r
                    (VOID **) &ScsiInterface,\r
                    This->DriverBindingHandle,\r
                    Controller,\r
                    EFI_OPEN_PROTOCOL_BY_DRIVER\r
                    );\r
    //\r
    // Fail to open EFI PassThru Protocol, Close the DevicePathProtocol if it is opened by this time.\r
    //\r
    if (EFI_ERROR (Status) && (Status != EFI_ALREADY_STARTED)) {\r
      if (!EFI_ERROR(DevicePathStatus)) {\r
        gBS->CloseProtocol (\r
               Controller,\r
               &gEfiDevicePathProtocolGuid,\r
               This->DriverBindingHandle,\r
               Controller\r
               );\r
      } \r
      return Status;\r
    } \r
  } else {\r
    //\r
    // Succeed to open ExtPassThru Protocol, and meanwhile open PassThru Protocol \r
    // with BY_DRIVER if it is also present on the handle. The intent is to prevent \r
    // another SCSI Bus Driver to work on the same host handle.\r
    //\r
    ExtScsiSupport = TRUE;\r
    PassThruStatus = gBS->OpenProtocol (\r
                            Controller,\r
                            &gEfiScsiPassThruProtocolGuid,\r
                            (VOID **) &ScsiInterface,\r
                            This->DriverBindingHandle,\r
                            Controller,\r
                            EFI_OPEN_PROTOCOL_BY_DRIVER\r
                            );\r
  }\r
    \r
  if (Status != EFI_ALREADY_STARTED) {\r
    //\r
    // Go through here means either ExtPassThru or PassThru Protocol is successfully opened\r
    // on this handle for this time. Then construct Host controller private data.\r
    //\r
    ScsiBusDev = NULL;\r
    ScsiBusDev = AllocateZeroPool(sizeof(SCSI_BUS_DEVICE));\r
    if (ScsiBusDev == NULL) {\r
      Status = EFI_OUT_OF_RESOURCES;\r
      goto ErrorExit;\r
    }\r
    ScsiBusDev->Signature        = SCSI_BUS_DEVICE_SIGNATURE;\r
    ScsiBusDev->ExtScsiSupport   = ExtScsiSupport;\r
    ScsiBusDev->DevicePath       = ParentDevicePath;\r
    if (ScsiBusDev->ExtScsiSupport) {\r
      ScsiBusDev->ExtScsiInterface = ExtScsiInterface;\r
    } else {\r
      ScsiBusDev->ScsiInterface    = ScsiInterface;    \r
    }\r
\r
    //\r
    // Install EFI_SCSI_BUS_PROTOCOL to the controller handle, So ScsiBusDev could be\r
    // retrieved on this controller handle. With ScsiBusDev, we can know which PassThru\r
    // Protocol is present on the handle, UEFI ExtPassThru Protocol or EFI PassThru Protocol.\r
    // \r
    Status = gBS->InstallProtocolInterface (\r
                    &Controller,\r
                    &gEfiCallerIdGuid,\r
                    EFI_NATIVE_INTERFACE,\r
                    &ScsiBusDev->BusIdentify\r
                    );\r
    if (EFI_ERROR (Status)) {\r
      goto ErrorExit;\r
    }\r
  } else {\r
    //\r
    // Go through here means Start() is re-invoked again, nothing special is required to do except\r
    // picking up Host controller private information.\r
    //\r
    Status = gBS->OpenProtocol (\r
                    Controller,\r
                    &gEfiCallerIdGuid,\r
                    (VOID **) &BusIdentify,\r
                    This->DriverBindingHandle,\r
                    Controller,\r
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
                    );\r
\r
    if (EFI_ERROR (Status)) {\r
      return Status;\r
    }\r
    ScsiBusDev = SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS (BusIdentify);\r
  }\r
\r
  //\r
  // Report Status Code to indicate detecting devices on bus\r
  //\r
  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
    EFI_PROGRESS_CODE,\r
    (EFI_IO_BUS_SCSI | EFI_IOB_PC_DETECT),\r
    ParentDevicePath\r
    );\r
\r
  Lun  = 0;\r
  if (RemainingDevicePath == NULL) {\r
    //\r
    // If RemainingDevicePath is NULL, \r
    // must enumerate all SCSI devices anyway\r
    //\r
    FromFirstTarget = TRUE;\r
  } else if (!IsDevicePathEnd (RemainingDevicePath)) {\r
    //\r
    // If RemainingDevicePath isn't the End of Device Path Node, \r
    // only scan the specified device by RemainingDevicePath\r
    //\r
    if (ScsiBusDev->ExtScsiSupport) {\r
      Status = ScsiBusDev->ExtScsiInterface->GetTargetLun (ScsiBusDev->ExtScsiInterface, RemainingDevicePath, &TargetId, &Lun);  \r
    } else {\r
      Status = ScsiBusDev->ScsiInterface->GetTargetLun (ScsiBusDev->ScsiInterface, RemainingDevicePath, &ScsiTargetId.ScsiId.Scsi, &Lun);\r
    }\r
\r
    if (EFI_ERROR (Status)) {\r
      return Status;\r
    }\r
  } else {\r
    //\r
    // If RemainingDevicePath is the End of Device Path Node,\r
    // skip enumerate any device and return EFI_SUCESSS\r
    // \r
    ScanOtherPuns = FALSE;\r
  }\r
\r
  while(ScanOtherPuns) {\r
    if (FromFirstTarget) {\r
      //\r
      // Remaining Device Path is NULL, scan all the possible Puns in the\r
      // SCSI Channel.\r
      //\r
      if (ScsiBusDev->ExtScsiSupport) {\r
        Status = ScsiBusDev->ExtScsiInterface->GetNextTargetLun (ScsiBusDev->ExtScsiInterface, &TargetId, &Lun);\r
      } else {\r
        Status = ScsiBusDev->ScsiInterface->GetNextDevice (ScsiBusDev->ScsiInterface, &ScsiTargetId.ScsiId.Scsi, &Lun);\r
      }\r
      if (EFI_ERROR (Status)) {\r
        //\r
        // no legal Pun and Lun found any more\r
        //\r
        break;\r
      }\r
    } else {\r
      ScanOtherPuns = FALSE;\r
    }\r
    //\r
    // Avoid creating handle for the host adapter.\r
    //\r
    if (ScsiBusDev->ExtScsiSupport) {\r
      if ((ScsiTargetId.ScsiId.Scsi) == ScsiBusDev->ExtScsiInterface->Mode->AdapterId) {\r
        continue;\r
      }\r
    } else {\r
      if ((ScsiTargetId.ScsiId.Scsi) == ScsiBusDev->ScsiInterface->Mode->AdapterId) {\r
        continue;\r
      }\r
    }\r
    //\r
    // Scan for the scsi device, if it attaches to the scsi bus,\r
    // then create handle and install scsi i/o protocol.\r
    //\r
    Status = ScsiScanCreateDevice (This, Controller, &ScsiTargetId, Lun, ScsiBusDev);\r
  }\r
  return EFI_SUCCESS;\r
\r
ErrorExit:\r
  \r
  if (ScsiBusDev != NULL) {\r
    FreePool (ScsiBusDev);\r
  }\r
  \r
  if (ExtScsiSupport) {\r
    gBS->CloseProtocol (\r
           Controller,\r
           &gEfiExtScsiPassThruProtocolGuid,\r
           This->DriverBindingHandle,\r
           Controller\r
           );\r
    if (!EFI_ERROR (PassThruStatus)) {\r
      gBS->CloseProtocol (\r
             Controller,\r
             &gEfiScsiPassThruProtocolGuid,\r
             This->DriverBindingHandle,\r
             Controller\r
             );\r
    }\r
  } else {\r
    gBS->CloseProtocol (\r
           Controller,\r
           &gEfiScsiPassThruProtocolGuid,\r
           This->DriverBindingHandle,\r
           Controller\r
           );\r
  }\r
  return Status;\r
}\r
\r
/**\r
  Stop this driver on ControllerHandle.\r
\r
  This service is called by the EFI boot service DisconnectController().\r
  In order to make drivers as small as possible, there are a few calling\r
  restrictions for this service. DisconnectController() must follow these\r
  calling restrictions. If any other agent wishes to call Stop() it must also\r
  follow these calling restrictions.\r
  \r
  @param  This              Protocol instance pointer.\r
  @param  ControllerHandle  Handle of device to stop driver on\r
  @param  NumberOfChildren  Number of Handles in ChildHandleBuffer. If number of\r
                            children is zero stop the entire bus driver.\r
  @param  ChildHandleBuffer List of Child Handles to Stop.\r
\r
  @retval EFI_SUCCESS       This driver is removed ControllerHandle\r
  @retval other             This driver was not removed from this device\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SCSIBusDriverBindingStop (\r
  IN  EFI_DRIVER_BINDING_PROTOCOL     *This,\r
  IN  EFI_HANDLE                      Controller,\r
  IN  UINTN                           NumberOfChildren,\r
  IN  EFI_HANDLE                      *ChildHandleBuffer\r
  )\r
{\r
  EFI_STATUS                  Status;\r
  BOOLEAN                     AllChildrenStopped;\r
  UINTN                       Index;\r
  EFI_SCSI_IO_PROTOCOL        *ScsiIo;\r
  SCSI_IO_DEV                 *ScsiIoDevice;\r
  VOID                        *ScsiPassThru;\r
  EFI_SCSI_BUS_PROTOCOL       *Scsidentifier;\r
  SCSI_BUS_DEVICE             *ScsiBusDev;\r
\r
  if (NumberOfChildren == 0) {\r
    //\r
    // Get the SCSI_BUS_DEVICE\r
    //\r
    Status = gBS->OpenProtocol (\r
                    Controller,\r
                    &gEfiCallerIdGuid,\r
                    (VOID **) &Scsidentifier,\r
                    This->DriverBindingHandle,\r
                    Controller,\r
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
                    );\r
\r
    if (EFI_ERROR (Status)) {\r
      return EFI_DEVICE_ERROR;\r
    }\r
\r
    ScsiBusDev = SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS (Scsidentifier);\r
\r
    //\r
    // Uninstall SCSI Bus Protocol\r
    //\r
    gBS->UninstallProtocolInterface (\r
           Controller,\r
           &gEfiCallerIdGuid,\r
           &ScsiBusDev->BusIdentify\r
           );\r
\r
    //\r
    // Close the bus driver\r
    //\r
    if (ScsiBusDev->ExtScsiSupport) {\r
      //\r
      // Close ExtPassThru Protocol from this controller handle\r
      //\r
      gBS->CloseProtocol (\r
             Controller,\r
             &gEfiExtScsiPassThruProtocolGuid,\r
             This->DriverBindingHandle,\r
             Controller\r
             );\r
      //\r
      // When Start() succeeds to open ExtPassThru, it always tries to open PassThru BY_DRIVER.\r
      // Its intent is to prevent another SCSI Bus Driver from woking on the same host handle. \r
      // So Stop() needs to try to close PassThru if present here.\r
      //\r
      gBS->CloseProtocol (\r
             Controller,\r
             &gEfiScsiPassThruProtocolGuid,\r
             This->DriverBindingHandle,\r
             Controller\r
             );\r
    } else {\r
      gBS->CloseProtocol (\r
             Controller,\r
             &gEfiScsiPassThruProtocolGuid,\r
             This->DriverBindingHandle,\r
             Controller\r
             );\r
    }\r
\r
    gBS->CloseProtocol (\r
           Controller,\r
           &gEfiDevicePathProtocolGuid,\r
           This->DriverBindingHandle,\r
           Controller\r
           );\r
    FreePool (ScsiBusDev);\r
    return EFI_SUCCESS;\r
  }\r
\r
  AllChildrenStopped = TRUE;\r
\r
  for (Index = 0; Index < NumberOfChildren; Index++) {\r
\r
    Status = gBS->OpenProtocol (\r
                    ChildHandleBuffer[Index],\r
                    &gEfiScsiIoProtocolGuid,\r
                    (VOID **) &ScsiIo,\r
                    This->DriverBindingHandle,\r
                    Controller,\r
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
                    );\r
    if (EFI_ERROR (Status)) {\r
      AllChildrenStopped = FALSE;\r
      continue;\r
    }\r
\r
    ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (ScsiIo);\r
    //\r
    // Close the child handle\r
    //\r
    if (ScsiIoDevice->ExtScsiSupport) {\r
      Status = gBS->CloseProtocol (\r
                      Controller,\r
                      &gEfiExtScsiPassThruProtocolGuid,\r
                      This->DriverBindingHandle,\r
                      ChildHandleBuffer[Index]\r
                      );\r
\r
    } else {\r
      Status = gBS->CloseProtocol (\r
                      Controller,\r
                      &gEfiScsiPassThruProtocolGuid,\r
                      This->DriverBindingHandle,\r
                      ChildHandleBuffer[Index]\r
                      );\r
    }\r
\r
    Status = gBS->UninstallMultipleProtocolInterfaces (\r
                    ChildHandleBuffer[Index],\r
                    &gEfiDevicePathProtocolGuid,\r
                    ScsiIoDevice->DevicePath,\r
                    &gEfiScsiIoProtocolGuid,\r
                    &ScsiIoDevice->ScsiIo,\r
                    NULL\r
                    );\r
    if (EFI_ERROR (Status)) {\r
      AllChildrenStopped = FALSE;\r
      if (ScsiIoDevice->ExtScsiSupport) {\r
        gBS->OpenProtocol (\r
               Controller,\r
               &gEfiExtScsiPassThruProtocolGuid,\r
               &ScsiPassThru,\r
               This->DriverBindingHandle,\r
               ChildHandleBuffer[Index],\r
               EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER\r
               );\r
      } else {\r
        gBS->OpenProtocol (\r
               Controller,\r
               &gEfiScsiPassThruProtocolGuid,\r
               &ScsiPassThru,\r
               This->DriverBindingHandle,\r
               ChildHandleBuffer[Index],\r
               EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER\r
               );\r
      }\r
    } else {\r
      FreePool (ScsiIoDevice);\r
    }\r
  }\r
\r
  if (!AllChildrenStopped) {\r
    return EFI_DEVICE_ERROR;\r
  }\r
\r
  return EFI_SUCCESS;\r
}\r
\r
\r
/**\r
  Retrieves the device type information of the SCSI Controller.\r
\r
  @param  This          Protocol instance pointer.\r
  @param  DeviceType    A pointer to the device type information retrieved from\r
                        the SCSI Controller. \r
\r
  @retval EFI_SUCCESS             Retrieves the device type information successfully.\r
  @retval EFI_INVALID_PARAMETER   The DeviceType is NULL.\r
  \r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiGetDeviceType (\r
  IN  EFI_SCSI_IO_PROTOCOL     *This,\r
  OUT UINT8                    *DeviceType\r
  )\r
{\r
  SCSI_IO_DEV *ScsiIoDevice;\r
\r
  if (DeviceType == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  ScsiIoDevice  = SCSI_IO_DEV_FROM_THIS (This);\r
  *DeviceType   = ScsiIoDevice->ScsiDeviceType;\r
  return EFI_SUCCESS;\r
}\r
\r
\r
/**\r
  Retrieves the device location in the SCSI channel.\r
\r
  @param  This   Protocol instance pointer.\r
  @param  Target A pointer to the Target ID of a SCSI device\r
                 on the SCSI channel.\r
  @param  Lun    A pointer to the LUN of the SCSI device on\r
                 the SCSI channel.\r
\r
  @retval EFI_SUCCESS           Retrieves the device location successfully.\r
  @retval EFI_INVALID_PARAMETER The Target or Lun is NULL.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiGetDeviceLocation (\r
  IN  EFI_SCSI_IO_PROTOCOL    *This,\r
  IN OUT UINT8                **Target,\r
  OUT UINT64                  *Lun\r
  )\r
{\r
  SCSI_IO_DEV *ScsiIoDevice;\r
\r
  if (Target == NULL || Lun == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);\r
\r
  CopyMem (*Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);\r
\r
  *Lun         = ScsiIoDevice->Lun;\r
\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  Resets the SCSI Bus that the SCSI Controller is attached to.\r
\r
  @param  This  Protocol instance pointer.\r
\r
  @retval  EFI_SUCCESS       The SCSI bus is reset successfully.\r
  @retval  EFI_DEVICE_ERROR  Errors encountered when resetting the SCSI bus.\r
  @retval  EFI_UNSUPPORTED   The bus reset operation is not supported by the\r
                             SCSI Host Controller.\r
  @retval  EFI_TIMEOUT       A timeout occurred while attempting to reset \r
                             the SCSI bus.\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiResetBus (\r
  IN  EFI_SCSI_IO_PROTOCOL     *This\r
  )\r
{\r
  SCSI_IO_DEV *ScsiIoDevice;\r
\r
  ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);\r
\r
  //\r
  // Report Status Code to indicate reset happens\r
  //\r
  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
    EFI_PROGRESS_CODE,\r
    (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),\r
    ScsiIoDevice->ScsiBusDeviceData->DevicePath\r
    );\r
\r
  if (ScsiIoDevice->ExtScsiSupport){\r
    return ScsiIoDevice->ExtScsiPassThru->ResetChannel (ScsiIoDevice->ExtScsiPassThru);\r
  } else {\r
    return ScsiIoDevice->ScsiPassThru->ResetChannel (ScsiIoDevice->ScsiPassThru);\r
  }\r
}\r
\r
\r
/**\r
  Resets the SCSI Controller that the device handle specifies.\r
\r
  @param  This  Protocol instance pointer.\r
\r
  @retval  EFI_SUCCESS       Reset the SCSI controller successfully.\r
  @retval  EFI_DEVICE_ERROR  Errors are encountered when resetting the SCSI Controller.\r
  @retval  EFI_UNSUPPORTED   The SCSI bus does not support a device reset operation.\r
  @retval  EFI_TIMEOUT       A timeout occurred while attempting to reset the\r
                             SCSI Controller.\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiResetDevice (\r
  IN  EFI_SCSI_IO_PROTOCOL     *This\r
  )\r
{\r
  SCSI_IO_DEV  *ScsiIoDevice;\r
  UINT8        Target[TARGET_MAX_BYTES];\r
\r
  ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);\r
\r
  //\r
  // Report Status Code to indicate reset happens\r
  //\r
  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
    EFI_PROGRESS_CODE,\r
    (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),\r
    ScsiIoDevice->ScsiBusDeviceData->DevicePath\r
    );\r
  \r
  CopyMem (Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);\r
\r
\r
  if (ScsiIoDevice->ExtScsiSupport) {\r
    return ScsiIoDevice->ExtScsiPassThru->ResetTargetLun (\r
                                        ScsiIoDevice->ExtScsiPassThru,\r
                                        Target,\r
                                        ScsiIoDevice->Lun\r
                                          );\r
  } else {\r
    return ScsiIoDevice->ScsiPassThru->ResetTarget (\r
                                          ScsiIoDevice->ScsiPassThru,\r
                                          ScsiIoDevice->Pun.ScsiId.Scsi,\r
                                          ScsiIoDevice->Lun\r
                                            );\r
  }\r
}\r
\r
\r
/**\r
  Sends a SCSI Request Packet to the SCSI Controller for execution.\r
\r
  @param  This            Protocol instance pointer.\r
  @param  CommandPacket   The SCSI request packet to send to the SCSI \r
                          Controller specified by the device handle.\r
  @param  Event           If the SCSI bus where the SCSI device is attached\r
                          does not support non-blocking I/O, then Event is \r
                          ignored, and blocking I/O is performed.  \r
                          If Event is NULL, then blocking I/O is performed.\r
                          If Event is not NULL and non-blocking I/O is \r
                          supported, then non-blocking I/O is performed,\r
                          and Event will be signaled when the SCSI Request\r
                          Packet completes.\r
\r
  @retval EFI_SUCCESS         The SCSI Request Packet was sent by the host \r
                              successfully, and TransferLength bytes were \r
                              transferred to/from DataBuffer.See \r
                              HostAdapterStatus, TargetStatus, \r
                              SenseDataLength, and SenseData in that order\r
                              for additional status information.\r
  @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, \r
                              but the entire DataBuffer could not be transferred.\r
                              The actual number of bytes transferred is returned\r
                              in TransferLength. See HostAdapterStatus, \r
                              TargetStatus, SenseDataLength, and SenseData in \r
                              that order for additional status information.\r
  @retval EFI_NOT_READY       The SCSI Request Packet could not be sent because \r
                              there are too many SCSI Command Packets already \r
                              queued.The caller may retry again later.\r
  @retval EFI_DEVICE_ERROR    A device error occurred while attempting to send \r
                              the SCSI Request Packet. See HostAdapterStatus, \r
                              TargetStatus, SenseDataLength, and SenseData in \r
                              that order for additional status information.\r
  @retval EFI_INVALID_PARAMETER  The contents of CommandPacket are invalid.  \r
                                 The SCSI Request Packet was not sent, so no \r
                                 additional status information is available.\r
  @retval EFI_UNSUPPORTED     The command described by the SCSI Request Packet\r
                              is not supported by the SCSI initiator(i.e., SCSI \r
                              Host Controller). The SCSI Request Packet was not\r
                              sent, so no additional status information is \r
                              available.\r
  @retval EFI_TIMEOUT         A timeout occurred while waiting for the SCSI \r
                              Request Packet to execute. See HostAdapterStatus,\r
                              TargetStatus, SenseDataLength, and SenseData in \r
                              that order for additional status information.\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiExecuteSCSICommand (\r
  IN     EFI_SCSI_IO_PROTOCOL                     *This,\r
  IN OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET          *Packet,\r
  IN     EFI_EVENT                                Event  OPTIONAL\r
  )\r
{\r
  SCSI_IO_DEV                                 *ScsiIoDevice;\r
  EFI_STATUS                                  Status;\r
  UINT8                                       Target[TARGET_MAX_BYTES];\r
  EFI_EVENT                                   PacketEvent;\r
  EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *ExtRequestPacket;\r
  SCSI_EVENT_DATA                             EventData;                                     \r
\r
  PacketEvent = NULL;\r
  \r
  if (Packet == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  ScsiIoDevice  = SCSI_IO_DEV_FROM_THIS (This);\r
  CopyMem (Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);\r
\r
  if (ScsiIoDevice->ExtScsiSupport) {\r
    ExtRequestPacket = (EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *) Packet;\r
\r
    if (((ScsiIoDevice->ExtScsiPassThru->Mode->Attributes & EFI_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO) != 0) && (Event !=  NULL)) {\r
      Status = ScsiIoDevice->ExtScsiPassThru->PassThru (\r
                                                ScsiIoDevice->ExtScsiPassThru,\r
                                                Target,\r
                                                ScsiIoDevice->Lun,\r
                                                ExtRequestPacket,\r
                                                Event\r
                                                );\r
    } else {\r
      //\r
      // If there's no event or the SCSI Device doesn't support NON-BLOCKING,\r
      // let the 'Event' parameter for PassThru() be NULL.\r
      //\r
      Status = ScsiIoDevice->ExtScsiPassThru->PassThru (\r
                                                ScsiIoDevice->ExtScsiPassThru,\r
                                                Target,\r
                                                ScsiIoDevice->Lun,\r
                                                ExtRequestPacket,\r
                                                NULL\r
                                                );\r
      if ((!EFI_ERROR(Status)) && (Event != NULL)) {\r
        //\r
        // Signal Event to tell caller to pick up the SCSI IO packet if the\r
        // PassThru() succeeds.\r
        //\r
        gBS->SignalEvent (Event);\r
      }\r
    }\r
  } else {\r
\r
    mWorkingBuffer = AllocatePool (sizeof(EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));\r
\r
    if (mWorkingBuffer == NULL) {\r
      return EFI_DEVICE_ERROR;\r
    }\r
\r
    //\r
    // Convert package into EFI1.0, EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET.\r
    //\r
    Status = ScsiioToPassThruPacket(Packet, (EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET*)mWorkingBuffer);\r
    if (EFI_ERROR(Status)) {\r
      FreePool(mWorkingBuffer);\r
      return Status;\r
    }\r
\r
    if (((ScsiIoDevice->ScsiPassThru->Mode->Attributes & EFI_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO) != 0) && (Event !=  NULL)) {\r
      EventData.Data1 = (VOID*)Packet;\r
      EventData.Data2 = Event;\r
      //\r
      // Create Event\r
      //\r
      Status = gBS->CreateEvent (\r
                       EVT_NOTIFY_SIGNAL,\r
                       TPL_NOTIFY,\r
                       NotifyFunction,\r
                       &EventData,\r
                       &PacketEvent\r
                       );\r
      if (EFI_ERROR(Status)) {\r
        FreePool(mWorkingBuffer);\r
        return Status;\r
      }\r
\r
      Status = ScsiIoDevice->ScsiPassThru->PassThru (\r
                                          ScsiIoDevice->ScsiPassThru,\r
                                          ScsiIoDevice->Pun.ScsiId.Scsi,\r
                                          ScsiIoDevice->Lun,\r
                                          mWorkingBuffer,\r
                                          PacketEvent\r
                                          );\r
\r
      if (EFI_ERROR(Status)) {\r
        FreePool(mWorkingBuffer);\r
        gBS->CloseEvent(PacketEvent);\r
        return Status;\r
      }\r
\r
    } else {\r
      //\r
      // If there's no event or SCSI Device doesn't support NON-BLOCKING, just convert\r
      // EFI1.0 PassThru packet back to UEFI2.0 SCSI IO Packet.\r
      //\r
      Status = ScsiIoDevice->ScsiPassThru->PassThru (\r
                                          ScsiIoDevice->ScsiPassThru,\r
                                          ScsiIoDevice->Pun.ScsiId.Scsi,\r
                                          ScsiIoDevice->Lun,\r
                                          mWorkingBuffer,\r
                                          NULL\r
                                          );\r
      if (EFI_ERROR(Status)) {\r
        FreePool(mWorkingBuffer);\r
        return Status;\r
      }\r
\r
      PassThruToScsiioPacket((EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET*)mWorkingBuffer,Packet);\r
      //\r
      // After converting EFI1.0 PassThru Packet back to UEFI2.0 SCSI IO Packet,\r
      // free mWorkingBuffer.\r
      //\r
      FreePool(mWorkingBuffer);\r
\r
      //\r
      // Signal Event to tell caller to pick up the SCSI IO Packet.\r
      //\r
      if (Event != NULL) {\r
        gBS->SignalEvent (Event);\r
      }\r
    }\r
  }\r
  return Status;\r
}\r
\r
\r
/**\r
  Scan SCSI Bus to discover the device, and attach ScsiIoProtocol to it.\r
\r
  @param  This           Protocol instance pointer\r
  @param  Controller     Controller handle\r
  @param  TargetId       Tartget to be scanned\r
  @param  Lun            The Lun of the SCSI device on the SCSI channel.\r
  @param  ScsiBusDev     The pointer of SCSI_BUS_DEVICE\r
\r
  @retval EFI_SUCCESS           Successfully to discover the device and attach\r
                                ScsiIoProtocol to it.\r
  @retval EFI_OUT_OF_RESOURCES  Fail to discover the device.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiScanCreateDevice (\r
  IN     EFI_DRIVER_BINDING_PROTOCOL   *This,\r
  IN     EFI_HANDLE                    Controller,\r
  IN     SCSI_TARGET_ID                *TargetId,\r
  IN     UINT64                        Lun,\r
  IN OUT SCSI_BUS_DEVICE               *ScsiBusDev\r
  )\r
{\r
  EFI_STATUS                Status;\r
  SCSI_IO_DEV               *ScsiIoDevice;\r
  EFI_DEVICE_PATH_PROTOCOL  *ScsiDevicePath;\r
  EFI_DEVICE_PATH_PROTOCOL  *DevicePath;\r
  EFI_DEVICE_PATH_PROTOCOL  *RemainingDevicePath;\r
  EFI_HANDLE                 DeviceHandle;\r
\r
  DevicePath          = NULL;\r
  RemainingDevicePath = NULL;\r
  ScsiDevicePath      = NULL;\r
  ScsiIoDevice        = NULL;\r
\r
  //\r
  // Build Device Path\r
  //\r
  if (ScsiBusDev->ExtScsiSupport){\r
    Status = ScsiBusDev->ExtScsiInterface->BuildDevicePath (\r
                                             ScsiBusDev->ExtScsiInterface,\r
                                             &TargetId->ScsiId.ExtScsi[0],\r
                                             Lun,\r
                                             &ScsiDevicePath\r
                                             );\r
  } else {\r
    Status = ScsiBusDev->ScsiInterface->BuildDevicePath (\r
                                          ScsiBusDev->ScsiInterface,\r
                                          TargetId->ScsiId.Scsi,\r
                                          Lun,\r
                                          &ScsiDevicePath\r
                                          );\r
  }\r
\r
  if (EFI_ERROR(Status)) {\r
    return Status;\r
  }\r
\r
  DevicePath = AppendDevicePathNode (\r
                 ScsiBusDev->DevicePath,\r
                 ScsiDevicePath\r
                 );\r
\r
  if (DevicePath == NULL) {\r
    Status = EFI_OUT_OF_RESOURCES;\r
    goto ErrorExit;\r
  }\r
\r
  DeviceHandle = NULL;\r
  RemainingDevicePath = DevicePath;\r
  Status = gBS->LocateDevicePath (&gEfiDevicePathProtocolGuid, &RemainingDevicePath, &DeviceHandle);\r
  if (!EFI_ERROR (Status) && (DeviceHandle != NULL) && IsDevicePathEnd(RemainingDevicePath)) {\r
    //\r
    // The device has been started, directly return to fast boot.\r
    //\r
    Status = EFI_ALREADY_STARTED;\r
    goto ErrorExit;\r
  }\r
\r
  ScsiIoDevice = AllocateZeroPool (sizeof (SCSI_IO_DEV));\r
  if (ScsiIoDevice == NULL) {\r
    Status = EFI_OUT_OF_RESOURCES;\r
    goto ErrorExit;\r
  }\r
\r
  ScsiIoDevice->Signature                 = SCSI_IO_DEV_SIGNATURE;\r
  ScsiIoDevice->ScsiBusDeviceData         = ScsiBusDev;\r
  CopyMem(&ScsiIoDevice->Pun, TargetId, TARGET_MAX_BYTES);\r
  ScsiIoDevice->Lun                       = Lun;\r
\r
  if (ScsiBusDev->ExtScsiSupport) {\r
    ScsiIoDevice->ExtScsiPassThru         = ScsiBusDev->ExtScsiInterface;\r
    ScsiIoDevice->ExtScsiSupport          = TRUE;\r
    ScsiIoDevice->ScsiIo.IoAlign          = ScsiIoDevice->ExtScsiPassThru->Mode->IoAlign;\r
\r
  } else {\r
    ScsiIoDevice->ScsiPassThru            = ScsiBusDev->ScsiInterface;\r
    ScsiIoDevice->ExtScsiSupport          = FALSE;\r
    ScsiIoDevice->ScsiIo.IoAlign          = ScsiIoDevice->ScsiPassThru->Mode->IoAlign;\r
  }\r
\r
  ScsiIoDevice->ScsiIo.GetDeviceType      = ScsiGetDeviceType;\r
  ScsiIoDevice->ScsiIo.GetDeviceLocation  = ScsiGetDeviceLocation;\r
  ScsiIoDevice->ScsiIo.ResetBus           = ScsiResetBus;\r
  ScsiIoDevice->ScsiIo.ResetDevice        = ScsiResetDevice;\r
  ScsiIoDevice->ScsiIo.ExecuteScsiCommand = ScsiExecuteSCSICommand;\r
\r
  //\r
  // Report Status Code here since the new SCSI device will be discovered\r
  //\r
  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
    EFI_PROGRESS_CODE,\r
    (EFI_IO_BUS_SCSI | EFI_IOB_PC_ENABLE),\r
    ScsiBusDev->DevicePath\r
    );\r
\r
  if (!DiscoverScsiDevice (ScsiIoDevice)) {\r
    Status = EFI_OUT_OF_RESOURCES;\r
    goto ErrorExit;\r
  }\r
\r
  ScsiIoDevice->DevicePath = DevicePath;\r
\r
  Status = gBS->InstallMultipleProtocolInterfaces (\r
                  &ScsiIoDevice->Handle,\r
                  &gEfiDevicePathProtocolGuid,\r
                  ScsiIoDevice->DevicePath,\r
                  &gEfiScsiIoProtocolGuid,\r
                  &ScsiIoDevice->ScsiIo,\r
                  NULL\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    goto ErrorExit;\r
  } else {\r
    if (ScsiBusDev->ExtScsiSupport) {\r
      gBS->OpenProtocol (\r
             Controller,\r
             &gEfiExtScsiPassThruProtocolGuid,\r
             (VOID **) &(ScsiBusDev->ExtScsiInterface),\r
             This->DriverBindingHandle,\r
             ScsiIoDevice->Handle,\r
             EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER\r
             );\r
     } else {\r
      gBS->OpenProtocol (\r
             Controller,\r
             &gEfiScsiPassThruProtocolGuid,\r
             (VOID **) &(ScsiBusDev->ScsiInterface),\r
             This->DriverBindingHandle,\r
             ScsiIoDevice->Handle,\r
             EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER\r
             );\r
     }\r
  }\r
  return EFI_SUCCESS;\r
\r
ErrorExit:\r
  \r
  //\r
  // The memory space for ScsiDevicePath is allocated in\r
  // ScsiPassThru->BuildDevicePath() function; It is no longer used\r
  // after AppendDevicePathNode,so free the memory it occupies.\r
  //\r
  FreePool (ScsiDevicePath);\r
\r
  if (DevicePath != NULL) {\r
    FreePool (DevicePath);\r
  }\r
\r
  if (ScsiIoDevice != NULL) {\r
    FreePool (ScsiIoDevice);\r
  }\r
\r
  return Status;\r
}\r
\r
\r
/**\r
  Discovery SCSI Device\r
\r
  @param  ScsiIoDevice    The pointer of SCSI_IO_DEV\r
\r
  @retval  TRUE   Find SCSI Device and verify it.\r
  @retval  FALSE  Unable to find SCSI Device.\r
\r
**/\r
BOOLEAN\r
DiscoverScsiDevice (\r
  IN OUT  SCSI_IO_DEV   *ScsiIoDevice\r
  )\r
{\r
  EFI_STATUS            Status;\r
  UINT32                InquiryDataLength;\r
  UINT8                 SenseDataLength;\r
  UINT8                 HostAdapterStatus;\r
  UINT8                 TargetStatus;\r
  EFI_SCSI_INQUIRY_DATA *InquiryData;\r
  UINT8                 MaxRetry;\r
  UINT8                 Index;\r
  BOOLEAN               ScsiDeviceFound;\r
\r
  HostAdapterStatus = 0;\r
  TargetStatus      = 0;\r
\r
  InquiryData = AllocateAlignedBuffer (ScsiIoDevice, sizeof (EFI_SCSI_INQUIRY_DATA));\r
  if (InquiryData == NULL) {\r
    ScsiDeviceFound = FALSE;\r
    goto Done;\r
  }\r
\r
  //\r
  // Using Inquiry command to scan for the device\r
  //\r
  InquiryDataLength = sizeof (EFI_SCSI_INQUIRY_DATA);\r
  SenseDataLength   = 0;\r
  ZeroMem (InquiryData, InquiryDataLength);\r
\r
  MaxRetry = 2;\r
  for (Index = 0; Index < MaxRetry; Index++) {\r
    Status = ScsiInquiryCommand (\r
              &ScsiIoDevice->ScsiIo,\r
              SCSI_BUS_TIMEOUT,\r
              NULL,\r
              &SenseDataLength,\r
              &HostAdapterStatus,\r
              &TargetStatus,\r
              (VOID *) InquiryData,\r
              &InquiryDataLength,\r
              FALSE\r
              );\r
    if (!EFI_ERROR (Status)) {\r
      break;\r
    }\r
    if ((Status == EFI_BAD_BUFFER_SIZE) ||\r
        (Status == EFI_INVALID_PARAMETER) ||\r
        (Status == EFI_UNSUPPORTED)) {\r
      ScsiDeviceFound = FALSE;\r
      goto Done;\r
    }\r
  }\r
\r
  if (Index == MaxRetry) {\r
    ScsiDeviceFound = FALSE;\r
    goto Done;\r
  }\r
  \r
  //\r
  // Retrieved inquiry data successfully\r
  //\r
  if (InquiryData->Peripheral_Qualifier != 0) {\r
    ScsiDeviceFound = FALSE;\r
    goto Done;\r
  }\r
\r
  if (0x1e >= InquiryData->Peripheral_Type && InquiryData->Peripheral_Type >= 0xa) {\r
    ScsiDeviceFound = FALSE;\r
    goto Done;\r
  }\r
\r
  //\r
  // valid device type and peripheral qualifier combination.\r
  //\r
  ScsiIoDevice->ScsiDeviceType  = InquiryData->Peripheral_Type;\r
  ScsiIoDevice->RemovableDevice = InquiryData->Rmb;\r
  if (InquiryData->Version == 0) {\r
    ScsiIoDevice->ScsiVersion = 0;\r
  } else {\r
    //\r
    // ANSI-approved version\r
    //\r
    ScsiIoDevice->ScsiVersion = (UINT8) (InquiryData->Version & 0x07);\r
  }\r
\r
  ScsiDeviceFound = TRUE;\r
\r
Done:\r
  FreeAlignedBuffer (InquiryData, sizeof (EFI_SCSI_INQUIRY_DATA));\r
\r
  return ScsiDeviceFound;\r
}\r
\r
\r
/**\r
  Convert EFI_SCSI_IO_SCSI_REQUEST_PACKET packet to EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet.\r
\r
  @param  Packet         The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET\r
  @param  CommandPacket  The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
ScsiioToPassThruPacket (\r
  IN      EFI_SCSI_IO_SCSI_REQUEST_PACKET         *Packet,\r
  OUT     EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *CommandPacket\r
  )\r
{\r
  //\r
  //EFI 1.10 doesn't support Bi-Direction Command.\r
  //\r
  if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_BIDIRECTIONAL) {\r
    return EFI_UNSUPPORTED;\r
  }\r
\r
  ZeroMem (CommandPacket, sizeof (EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));\r
\r
  CommandPacket->Timeout           = Packet->Timeout;\r
  CommandPacket->Cdb               = Packet->Cdb;\r
  CommandPacket->CdbLength         = Packet->CdbLength;\r
  CommandPacket->DataDirection     = Packet->DataDirection;\r
  CommandPacket->HostAdapterStatus = Packet->HostAdapterStatus;\r
  CommandPacket->TargetStatus      = Packet->TargetStatus;\r
  CommandPacket->SenseData         = Packet->SenseData;\r
  CommandPacket->SenseDataLength   = Packet->SenseDataLength;\r
\r
  if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_READ) {\r
    CommandPacket->DataBuffer = Packet->InDataBuffer;\r
    CommandPacket->TransferLength = Packet->InTransferLength;\r
  } else if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_WRITE) {\r
    CommandPacket->DataBuffer = Packet->OutDataBuffer;\r
    CommandPacket->TransferLength = Packet->OutTransferLength;\r
  }\r
  return EFI_SUCCESS;\r
}\r
\r
\r
/**\r
  Convert EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet to EFI_SCSI_IO_SCSI_REQUEST_PACKET packet.\r
\r
  @param  ScsiPacket  The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET\r
  @param  Packet      The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
PassThruToScsiioPacket (\r
  IN     EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *ScsiPacket,\r
  OUT    EFI_SCSI_IO_SCSI_REQUEST_PACKET         *Packet\r
  )\r
{\r
  Packet->Timeout           = ScsiPacket->Timeout;\r
  Packet->Cdb               = ScsiPacket->Cdb;\r
  Packet->CdbLength         = ScsiPacket->CdbLength;\r
  Packet->DataDirection     = ScsiPacket->DataDirection;\r
  Packet->HostAdapterStatus = ScsiPacket->HostAdapterStatus;\r
  Packet->TargetStatus      = ScsiPacket->TargetStatus;\r
  Packet->SenseData         = ScsiPacket->SenseData;\r
  Packet->SenseDataLength   = ScsiPacket->SenseDataLength;\r
\r
  if (ScsiPacket->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_READ) {\r
    Packet->InDataBuffer = ScsiPacket->DataBuffer;\r
    Packet->InTransferLength = ScsiPacket->TransferLength;\r
  } else if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_WRITE) {\r
    Packet->OutDataBuffer = ScsiPacket->DataBuffer;\r
    Packet->OutTransferLength = ScsiPacket->TransferLength;\r
  }\r
\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  Notify Function in which convert EFI1.0 PassThru Packet back to UEF2.0\r
  SCSI IO Packet.\r
\r
  @param  Event    The instance of EFI_EVENT.\r
  @param  Context  The parameter passed in.\r
\r
**/\r
VOID\r
EFIAPI\r
NotifyFunction (\r
  IN  EFI_EVENT  Event,\r
  IN  VOID       *Context\r
  )\r
{\r
  EFI_SCSI_IO_SCSI_REQUEST_PACKET          *Packet;\r
  EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET   *ScsiPacket;\r
  EFI_EVENT                                CallerEvent;\r
  SCSI_EVENT_DATA                          *PassData;\r
\r
  PassData = (SCSI_EVENT_DATA*)Context;\r
  Packet  = (EFI_SCSI_IO_SCSI_REQUEST_PACKET *)PassData->Data1;\r
  ScsiPacket =  (EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET*)mWorkingBuffer;\r
\r
  //\r
  // Convert EFI1.0 PassThru packet to UEFI2.0 SCSI IO Packet.\r
  //\r
  PassThruToScsiioPacket(ScsiPacket, Packet);\r
\r
  //\r
  // After converting EFI1.0 PassThru Packet back to UEFI2.0 SCSI IO Packet,\r
  // free mWorkingBuffer.\r
  //\r
  gBS->FreePool(mWorkingBuffer);\r
\r
  //\r
  // Signal Event to tell caller to pick up UEFI2.0 SCSI IO Packet.\r
  //\r
  CallerEvent = PassData->Data2;\r
  gBS->CloseEvent(Event);\r
  gBS->SignalEvent(CallerEvent);\r
}\r
\r