Roll back changes to apply GetBestLanguage() in HiiDataBase. Exact language match...
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
4f57ff18 1## @file MdeModulePkg.dec\r
2#\r
bf314e67 3# This package provides the modules that conform to EFI/PI Industry standards.\r
4# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) \r
5# and libraries instances, which are used for those modules.\r
b7d286b6 6#\r
4e17cc90 7# Copyright (c) 2007 - 2009, Intel Corporation.\r
b7d286b6 8#\r
9# All rights reserved.\r
4f57ff18 10# This program and the accompanying materials are licensed and made available under\r
11# the terms and conditions of the BSD License which accompanies this distribution.\r
12# The full text of the license may be found at\r
13# http://opensource.org/licenses/bsd-license.php\r
ed838d0c 14#\r
4f57ff18 15# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
16# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
b7d286b6 17#\r
4f57ff18 18##\r
b7d286b6 19\r
20\r
b7d286b6 21[Defines]\r
22 DEC_SPECIFICATION = 0x00010005\r
84e20859 23 PACKAGE_NAME = MdeModulePkg\r
b7d286b6 24 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
25 PACKAGE_VERSION = 0.1\r
26\r
3a98b778 27[Includes.common]\r
ed838d0c 28 Include\r
b7d286b6 29\r
30143b15 30\r
31[LibraryClasses.common]\r
4f57ff18 32 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 33 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 34 IpIoLib|Include/Library/IpIoLib.h\r
f02d0c0f 35 \r
4f57ff18 36 ## @libraryclass Basic function for UEFI network stack.\r
93367605 37 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 38 NetLib|Include/Library/NetLib.h\r
f02d0c0f 39 \r
4f57ff18 40 ## @libraryclass The helper routines to access UDP service.\r
93367605 41 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 42 UdpIoLib|Include/Library/UdpIoLib.h\r
f02d0c0f 43 \r
97b2c9b5
LG
44 ## @libraryclass Defines a set of methods to reset whole system.\r
45 ResetSystemLib|Include/Library/ResetSystemLib.h\r
46\r
4f57ff18 47 ## @libraryclass Defines a set of methods related do S3 mode.\r
4fb31c2c 48 S3Lib|Include/Library/S3Lib.h\r
f02d0c0f 49 \r
4f57ff18 50 ## @libraryclass Defines a set of methods related recovery mode.\r
4fb31c2c 51 RecoveryLib|Include/Library/RecoveryLib.h\r
f02d0c0f 52 \r
804dbc37 53 ## @libraryclass Provides HII related functions.\r
54 HiiLib|Include/Library/HiiLib.h\r
e602a223 55 \r
4f57ff18 56 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 57 CapsuleLib|Include/Library/CapsuleLib.h\r
f02d0c0f 58 \r
4f57ff18 59 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG
60 DpcLib|Include/Library/DpcLib.h\r
61\r
ad801d01 62 ## @libraryclass Provides APIs for system memory test.\r
63 ##\r
d11ad584 64 MemoryTestLib|Include/Library/MemoryTestLib.h\r
ad801d01 65\r
9a6dcbf3
LG
66 ## @libraryclass Provides global variables that are pointers \r
67 ## to the UEFI HII related protocols. \r
68 ##\r
da801a6e 69 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 70\r
88f20127 71[Guids.common]\r
f02d0c0f 72 ## MdeModule package token space guid\r
55e4e173 73 ## Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 74 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 75\r
f02d0c0f 76 ## Hob guid for Pcd DataBase\r
55e4e173 77 ## Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 78 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
f02d0c0f 79 \r
5c526736 80 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 81 # Include/Guid/MdeModuleHii.h\r
5c526736
LG
82 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
83 \r
84 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 85 # Include/Guid/MdeModuleHii.h\r
5c526736 86 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
f02d0c0f
LG
87 \r
88 ## Guid to specify the System Non Volatile FV\r
55e4e173 89 ## Include/Guid/SystemNvDataGuid.h\r
351986ae 90 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
f02d0c0f 91 \r
f02d0c0f 92 ## Guid specify the device is the console out device.\r
55e4e173 93 ## Include/Guid/ConsoleOutDevice.h\r
351986ae 94 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG
95\r
96 ## Guid specify the device is the console in device.\r
55e4e173 97 ## Include/Guid/ConsoleInDevice.h\r
351986ae 98 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f 99 \r
f02d0c0f 100 ## Hob and Variable guid specify the platform memory type information.\r
55e4e173 101 ## Include/Guid/MemoryTypeInformation.h\r
351986ae 102 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
f02d0c0f
LG
103 \r
104 ## Capsule update hob and variable guid\r
55e4e173 105 ## Include/Guid/CapsuleVendor.h\r
351986ae 106 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
93367605 107 \r
f02d0c0f 108 ## Guid specifiy the device is the StdErr device.\r
55e4e173 109 ## Include/Guid/StandardErrorDevice.h\r
88f20127 110 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f 111 \r
3709c4cd 112 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
113 ## Include/Guid/VariableFormat.h\r
114 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
f02d0c0f 115 \r
2db4a77e 116 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
117 ## Include/Guid/Performance.h\r
118 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
1df7a023 119\r
76f1dde2
LG
120 ## Guid is defined for CRC32 encapsulation scheme.\r
121 ## Include/Guid/Crc32GuidedSectionExtraction.h\r
122 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
123\r
63886849 124 ## Include/Guid/NicIp4ConfigNvData.h\r
125 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
126\r
5c526736 127[Protocols.common] \r
023c0fec 128 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
129 ## Include/Protocol/LoadPe32Image.h\r
130 ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
131 ## If developer need implement such functionality, they should use BasePeCoffLib.\r
132 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
133 \r
f02d0c0f 134 ## Print protocol defines six basic print functions to print the format unicode and ascii string.\r
55e4e173 135 ## Include/Protocol/Print2.h\r
2dd4c603 136 gEfiPrint2ProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}\r
137\r
346cf9ac 138 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
55e4e173 139 ## Include/Protocol/GenericMemoryTest.h\r
351986ae 140 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
f02d0c0f 141 \r
55e4e173 142 ## Include/Protocol/Dpc.h\r
36ee91ca 143 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
f02d0c0f 144 \r
85e923a5
LG
145 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
146 # Include/Protocol/FaultTolerantWrite.h\r
147 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
148 \r
149 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
150 # Include/Protocol/SwapAddressRange.h\r
151 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
8d4cd915 152 \r
a86ae184 153[PcdsFeatureFlag]\r
f02d0c0f 154 ## Indicate whether platform can support update capsule across a system reset\r
109e9a61 155 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
2a00326e 156 \r
f806dd27 157 ## This feature flag can be used to enable or disable all PCD PEIM services.\r
aa19fa57
LG
158 # If TRUE, all PCD PPI services will be produced.\r
159 ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
f806dd27
LG
160 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
161\r
f02d0c0f
LG
162 ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
163 # It can be disabled to save size.\r
348c8131 164 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
f02d0c0f
LG
165 \r
166 ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
167 # It can be disabled to save size.\r
348c8131 168 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
2a00326e 169 \r
fc9da5a6 170 ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
171 # stored as a vendor configuration table into the EFI system table.\r
172 # If user wants to get variable usage info, this pcd should be set as TRUE.\r
33a5a666 173 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
f02d0c0f
LG
174 \r
175 ## If TRUE, Unicode Collation Protocol will be installed.\r
ac12a167 176 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
f02d0c0f
LG
177 \r
178 ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
ac12a167 179 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
f02d0c0f 180 \r
cebfa899 181 ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
182 # It could be set FALSE to save size.\r
d0c64728 183 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
f02d0c0f 184 \r
cebfa899 185 ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
186 # It could be set FALSE to save size.\r
d0c64728 187 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
f02d0c0f 188 \r
aa19fa57
LG
189 ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
190 # If TE section is not found, then PeiCore will search PE section.\r
191 # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
192 # This PCD is used to tune Pei phase performance to reduce the search image time.\r
193 # It can be set according to the generated image section type.\r
3076397e 194 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
f02d0c0f 195 \r
fc9da5a6 196 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
197 # interrupt to access usb device in the case of absence of usb stack.\r
198 ##\r
cc582cff 199 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
aa103f48 200\r
f02d0c0f
LG
201 ## If TRUE, HiiImageProtocol will be installed.\r
202 # FALSE is for size reduction.\r
813acf3a 203 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
f02d0c0f 204 \r
a8e1ed54 205 ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
206 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
207 # from HII database.\r
813acf3a 208 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 209\r
dae93068 210 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. \r
f806dd27
LG
211 # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
212 ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
213 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
223c22d8
LG
214 \r
215 ##\r
9dddc0ff 216 # If TRUE, HelloWorld Application will print the verbose information.\r
223c22d8
LG
217 # This PCD is a sample to explain FeatureFlag PCD usage.\r
218 ##\r
219 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 220\r
85e923a5
LG
221 ##\r
222 # If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
223 # If FASLE, only FTW Write service is available.\r
72670d3e 224 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
225\r
226 ##\r
227 # If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
228 # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
229 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 230\r
4e17cc90 231[PcdsFeatureFlag.IA32]\r
232 ## \r
233 # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
234 # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
235 # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
236 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
237 # is built in firmware.\r
238 #\r
239 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
240\r
a86ae184 241[PcdsFixedAtBuild]\r
1cedc893 242 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
243 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
244 # for a dynamic PCD used in PEI phase.\r
b3af5df6 245 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
9dddc0ff 246\r
1cedc893 247 ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
248 # to store PCD value. \r
249 #\r
b3af5df6 250 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
97b2c9b5 251 \r
1cedc893 252 ## Maximum number of FV is supported by PeiCore's dispatching.\r
177aabe6 253 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
f02d0c0f 254\r
1cedc893 255 ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
177aabe6 256 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
f02d0c0f 257\r
1cedc893 258 ## Maximum stack size for PeiCore.\r
58dcdada 259 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
f02d0c0f 260\r
1cedc893 261 ## Maximum PPI count is supported by PeiCore's PPI database.\r
eaf539d0 262 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
f02d0c0f 263 \r
2fcdca1d 264 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
265 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
266 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
267 # be reflushed through the manner of fault tolerant write. \r
b3af5df6 268 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
f02d0c0f 269 \r
2fcdca1d 270 ## The maximum size of single common variable, that is non-HwErr type varible.\r
518d395c 271 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
f02d0c0f 272 \r
2fcdca1d 273 ## The maximum size of single hardware error record variable.\r
274 # In IA32/X64 platforms, this value should be larger than 1KB.\r
275 # In IA64 platforms, this value should be larger than 128KB.\r
518d395c 276 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
f02d0c0f 277 \r
2fcdca1d 278 ## The size of reserved HwErr variable space. This space is located at NV variable range.\r
279 # HwErr type variable is stored with common non-volatile variables in NV region.\r
280 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
281 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006\r
282\r
283 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
518d395c 284 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
2fcdca1d 285\r
286 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
287 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
288 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
289 # be reflushed through the manner of fault tolerant write.\r
b3af5df6 290 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
a86ae184 291 \r
f02d0c0f 292 ## Size of the FTW working block range.\r
b3af5df6 293 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
3c506ddd 294\r
295 ## FFS filename to find the ACPI tables\r
296 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r
297\r
a86ae184 298[PcdsFixedAtBuild,PcdsPatchableInModule]\r
f02d0c0f 299 ## Maximun number of performance log entries during PEI phase.\r
348c8131 300 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 301\r
302 ## RTC Update Timeout Value\r
303 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
a86ae184 304 \r
305[PcdsPatchableInModule,PcdsDynamic]\r
4bfa7dc4 306 ##\r
307 # This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
308 ##\r
309 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
310 \r
311 ##\r
312 # This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
313 ##\r
4e17cc90 314 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
a86ae184 315 \r
316[PcdsFixedAtBuild,PcdsDynamic]\r
317 ## Base address of the NV variable range in flash device \r
318 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
319 \r
320 ## Base address of the FTW spare block range in flash device.\r
321 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 \r
322 \r
323 ## Base address of the FTW working block range in flash device.\r
324 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 \r
325 \r
223c22d8 326 ##\r
a86ae184 327 # This PCD defines the print string.\r
4e17cc90 328 # This PCD is a sample to explain String typed PCD usage.\r
223c22d8 329 ##\r
a86ae184 330 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 \r
331 \r
4e17cc90 332[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
333 ##\r
334 # This PCD defines the times to print hello world string.\r
335 # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
336 ##\r
337 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 338\r
4e17cc90 339 ## Indicate the max size of the populated capsule image that the platform can support.\r
340 # The default max size is 100MB (0x6400000) for more than one large capsule images. \r
341 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
342 \r
343 ## Indicate the max size of the non-populated capsule image that the platform can support.\r
344 # The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r
345 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r