]> git.proxmox.com Git - mirror_edk2.git/blame - MdeModulePkg/MdeModulePkg.dec
SecurityPkg: Tcg: New field for User Confirmation Status
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
e3e134eb 1## @file MdeModulePkg.dec\r
a9141950 2# This package provides the modules that conform to UEFI/PI Industry standards.\r
35c77dae 3# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
bf314e67 4# and libraries instances, which are used for those modules.\r
b7d286b6 5#\r
9e9a30bd 6# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>\r
f9bbb8d9 7# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>\r
7c50b343 8# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
5fc1ae69
DB
9# This program and the accompanying materials are licensed and made available under\r
10# the terms and conditions of the BSD License that accompanies this distribution.\r
4f57ff18 11# The full text of the license may be found at\r
5fc1ae69
DB
12# http://opensource.org/licenses/bsd-license.php.\r
13#\r
14# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
15# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
b7d286b6 16#\r
4f57ff18 17##\r
b7d286b6 18\r
19\r
b7d286b6 20[Defines]\r
21 DEC_SPECIFICATION = 0x00010005\r
84e20859 22 PACKAGE_NAME = MdeModulePkg\r
fe44bae5 23 PACKAGE_UNI_FILE = MdeModulePkg.uni\r
b7d286b6 24 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
cd68e4a8 25 PACKAGE_VERSION = 0.96\r
b7d286b6 26\r
6bfbb5f0 27[Includes]\r
ed838d0c 28 Include\r
b7d286b6 29\r
30143b15 30\r
6bfbb5f0 31[LibraryClasses]\r
4f57ff18 32 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 33 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 34 IpIoLib|Include/Library/IpIoLib.h\r
73850864 35\r
4f57ff18 36 ## @libraryclass Basic function for UEFI network stack.\r
93367605 37 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 38 NetLib|Include/Library/NetLib.h\r
73850864 39\r
4f57ff18 40 ## @libraryclass The helper routines to access UDP service.\r
93367605 41 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 42 UdpIoLib|Include/Library/UdpIoLib.h\r
73850864 43\r
4bad9ada 44 ## @libraryclass The helper routines to access TCP service.\r
45 # This library is only intended to be used by UEFI network stack modules.\r
46 TcpIoLib|Include/Library/TcpIoLib.h\r
47\r
3f6d5100 48 ## @libraryclass The helper routines to access HTTP service.\r
49 # This library is only intended to be used by UEFI network stack modules.\r
50 HttpLib|Include/Library/HttpLib.h\r
51\r
97b2c9b5
LG
52 ## @libraryclass Defines a set of methods to reset whole system.\r
53 ResetSystemLib|Include/Library/ResetSystemLib.h\r
54\r
4f57ff18 55 ## @libraryclass Defines a set of methods related do S3 mode.\r
05d71050 56 # This library class is no longer used and modules using this library should\r
57 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
4fb31c2c 58 S3Lib|Include/Library/S3Lib.h\r
73850864 59\r
4f57ff18 60 ## @libraryclass Defines a set of methods related recovery mode.\r
05d71050 61 # This library class is no longer used and modules using this library should\r
62 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
4fb31c2c 63 RecoveryLib|Include/Library/RecoveryLib.h\r
73850864 64\r
804dbc37 65 ## @libraryclass Provides HII related functions.\r
66 HiiLib|Include/Library/HiiLib.h\r
73850864 67\r
4f57ff18 68 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 69 CapsuleLib|Include/Library/CapsuleLib.h\r
73850864 70\r
4f57ff18 71 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG
72 DpcLib|Include/Library/DpcLib.h\r
73\r
73850864 74 ## @libraryclass Provides global variables that are pointers\r
a90ccab8
LG
75 # to the UEFI HII related protocols.\r
76 #\r
da801a6e 77 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 78\r
cd98f305
LG
79 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
80 #\r
975e8815 81 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
cd98f305 82\r
75dea6bd 83 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
84 #\r
85 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
86\r
fe92ab29 87 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
88 #\r
89 DebugAgentLib|Include/Library/DebugAgentLib.h\r
6eea8eae 90\r
467d15ae 91 ## @libraryclass Provide platform specific hooks.\r
92 #\r
93 PlatformHookLib|Include/Library/PlatformHookLib.h\r
495797c5 94\r
95 ## @libraryclass Provide platform specific hooks for SMM core.\r
96 #\r
97 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
32e85209
JY
98\r
99 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
100 #\r
101 LockBoxLib|Include/Library/LockBoxLib.h\r
5fc1ae69 102\r
1e172d6b 103 ## @libraryclass Provide the CPU exception handler.\r
104 #\r
105 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
5fc1ae69 106\r
7c6c064c
ED
107 ## @libraryclass Provides platform specific display interface.\r
108 #\r
109 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
110\r
ae591c14
DM
111 ## @libraryclass Provides sorting functions\r
112 SortLib|Include/Library/SortLib.h\r
113\r
1d112229
RN
114 ## @libraryclass Provides core boot manager functions\r
115 UefiBootManagerLib|Include/Library/UefiBootManagerLib.h\r
116\r
f4cd24da
RN
117 ## @libraryclass Provides core boot manager functions\r
118 PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
119\r
308521b1
SZ
120 ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
121 #\r
122 TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
123\r
b6477d82
SZ
124 ## @libraryclass Provides authenticated variable services.\r
125 #\r
371dc63d 126 AuthVariableLib|Include/Library/AuthVariableLib.h\r
b6477d82 127\r
31b183bc
SZ
128 ## @libraryclass Provides variable check services and database management.\r
129 #\r
130 VarCheckLib|Include/Library/VarCheckLib.h\r
131\r
c95d9ab8
SZ
132 ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
133 #\r
134 PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
5fc1ae69 135\r
ba529e7e
ED
136 ## @libraryclass Provides services to get do the file explorer.\r
137 #\r
138 FileExplorerLib|Include/Library/FileExplorerLib.h\r
c95d9ab8 139\r
345c2b07
RN
140 ## @libraryclass Provides image decoding service.\r
141 #\r
142 ImageDecoderLib|Include/Library/ImageDecoderLib.h\r
143\r
8dfe7fd2
RN
144 ## @libraryclass Provides interfaces about logo display.\r
145 #\r
146 BootLogoLib|Include/Library/BootLogoLib.h\r
147\r
54b330a4
DB
148 ## @libraryclass Provides interfaces about Ipmi submit generic commond.\r
149 #\r
150 IpmiLib|Include/Library/IpmiLib.h\r
151\r
9e9a30bd
RN
152 ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.\r
153 #\r
154 PciHostBridgeLib|Include/Library/PciHostBridgeLib.h\r
155\r
76570576
SZ
156 ## @libraryclass Provides services to record memory profile of multilevel caller.\r
157 #\r
158 MemoryProfileLib|Include/Library/MemoryProfileLib.h\r
159\r
6bfbb5f0 160[Guids]\r
f02d0c0f 161 ## MdeModule package token space guid\r
a90ccab8 162 # Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 163 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 164\r
f02d0c0f 165 ## Hob guid for Pcd DataBase\r
a90ccab8 166 # Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 167 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
73850864 168\r
419db80b
BF
169 ## Guid for PCD DataBase signature.\r
170 # Include/Guid/PcdDataBaseSignatureGuid.h\r
171 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
172\r
5c526736 173 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 174 # Include/Guid/MdeModuleHii.h\r
5c526736 175 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
73850864 176\r
5c526736 177 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 178 # Include/Guid/MdeModuleHii.h\r
5c526736 179 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
73850864 180\r
f02d0c0f 181 ## Guid to specify the System Non Volatile FV\r
a90ccab8 182 # Include/Guid/SystemNvDataGuid.h\r
351986ae 183 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
73850864 184\r
3e02ebb2
SZ
185 ## GUID used as the signature of FTW working block header.\r
186 # Include/Guid/SystemNvDataGuid.h\r
187 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
188\r
189 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
190 # Include/Guid/FaultTolerantWrite.h\r
191 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
192\r
f02d0c0f 193 ## Guid specify the device is the console out device.\r
a90ccab8 194 # Include/Guid/ConsoleOutDevice.h\r
351986ae 195 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG
196\r
197 ## Guid specify the device is the console in device.\r
a90ccab8 198 # Include/Guid/ConsoleInDevice.h\r
351986ae 199 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 200\r
f02d0c0f 201 ## Hob and Variable guid specify the platform memory type information.\r
a90ccab8 202 # Include/Guid/MemoryTypeInformation.h\r
351986ae 203 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
73850864 204\r
f02d0c0f 205 ## Capsule update hob and variable guid\r
a90ccab8 206 # Include/Guid/CapsuleVendor.h\r
351986ae 207 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
73850864 208\r
f02d0c0f 209 ## Guid specifiy the device is the StdErr device.\r
a90ccab8 210 # Include/Guid/StandardErrorDevice.h\r
88f20127 211 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 212\r
3709c4cd 213 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
a90ccab8 214 # Include/Guid/VariableFormat.h\r
3709c4cd 215 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
73850864 216\r
1fe6c125
SZ
217 ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
218 # Include/Guid/AuthenticatedVariableFormat.h\r
219 gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
220\r
9725730b 221 # Include/Guid/VariableIndexTable.h\r
222 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
223\r
d00ed85e 224 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
225 # Include/Guid/SmmVariableCommon.h\r
226 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
5fc1ae69 227\r
2db4a77e 228 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
a90ccab8 229 # Include/Guid/Performance.h\r
f0da4d7d
SZ
230 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
231 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
232 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
233 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
1df7a023 234\r
76f1dde2 235 ## Guid is defined for CRC32 encapsulation scheme.\r
a90ccab8 236 # Include/Guid/Crc32GuidedSectionExtraction.h\r
76f1dde2
LG
237 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
238\r
25126a05 239 ## Include/Guid/StatusCodeCallbackGuid.h\r
240 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
63886849 241\r
10c5d87e 242 ## GUID identifies status code records HOB that originate from the PEI status code\r
243 # Include/Guid/MemoryStatusCodeRecord.h\r
244 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
245\r
246 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
247 # Include/Guid/StatusCodeDataTypeDebug.h\r
248 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
249\r
5fc1ae69 250 ## A configuration Table Guid for Load module at fixed address\r
54ea99a7 251 # Include/Guid/LoadModuleAtFixedAddress.h\r
252 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
253\r
62a5bf63 254 ## GUID used to store the global debug mask value into an EFI Variable\r
5fc1ae69 255 # Include/Guid/DebugMask.h\r
62a5bf63 256 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
5fc1ae69 257\r
54cd17e9 258 ## Event for the DXE Core to signal idle events\r
259 # Include/Guid/EventIdle.h\r
260 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
261\r
30c00a1c 262 ## Include/Guid/RecoveryDevice.h\r
263 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
264\r
265 ## Include/Guid/RecoveryDevice.h\r
266 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
267\r
268 ## Include/Guid/RecoveryDevice.h\r
269 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
270\r
271 ## Include/Guid/RecoveryDevice.h\r
272 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
273\r
1c837cd5 274 ## Include/Guid/SmmLockBox.h\r
044824d9 275 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
1c837cd5 276\r
1261fe23 277 ## Include/Guid/AcpiS3Context.h\r
278 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
279\r
280 ## Include/Guid/AcpiS3Context.h\r
281 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
282\r
be46cd5f 283 ## Include/Guid/BootScriptExecutorVariable.h\r
284 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
285 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
286\r
c8ad2d7a
LG
287 ## Include/Guid/UsbKeyBoardLayout.h\r
288 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
289 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
5fc1ae69 290\r
c8ad2d7a
LG
291 ## Include/Guid/HiiResourceSampleHii.h\r
292 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
293\r
294 ## Include/Guid/DriverSampleHii.h\r
295 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
296 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
c8ad2d7a
LG
297 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
298\r
299 ## Include/Guid/PlatDriOverrideHii.h\r
300 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
301\r
1f6729ff 302 ## Include/Guid/Ip4Config2Hii.h\r
303 gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
304\r
c8ad2d7a
LG
305 ## Include/Guid/VlanConfigHii.h\r
306 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
307\r
308 ## Include/Guid/Ip4IScsiConfigHii.h\r
309 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
310 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
311\r
312 ## Include/Guid/ZeroGuid.h\r
313 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
5fc1ae69 314\r
c8ad2d7a
LG
315 ## Include/Guid/MtcVendor.h\r
316 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
317\r
0284e90c
LG
318 ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
319 # Include/Guid/FirmwarePerformance.h\r
044824d9 320 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
db91c620 321 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
044824d9 322\r
323 ## Include/Guid/ExitBootServiceFailed.h\r
324 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
0284e90c 325\r
f58f3de0 326 ## Include/Guid/ConnectConInEvent.h\r
327 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
328\r
69fc8f08
RN
329 ## Include/Guid/StatusCodeDataTypeVariable.h\r
330 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
5fc1ae69 331\r
84edd20b
SZ
332 ## Include/Guid/MemoryProfile.h\r
333 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
94092aa6 334 gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}\r
69fc8f08 335\r
4edb1866
SZ
336 ## Include/Protocol/VarErrorFlag.h\r
337 gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
338\r
a7adc5c5
LG
339 ## GUID indicates the LZMA custom compress/decompress algorithm.\r
340 # Include/Guid/LzmaDecompress.h\r
341 gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
342 gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
343\r
6e3227c8
RF
344 ## Include/Guid/TtyTerm.h\r
345 gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
346\r
143f0b1d
ED
347 ## Include/Guid/HiiBootMaintenanceFormset.h\r
348 gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
3a2dc0f5
DB
349\r
350 gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }\r
351\r
20752cb8
HW
352 ## Include/Guid/RamDiskHii.h\r
353 gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}\r
354\r
1e01ea24
JY
355 ## Include/Guid/PiSmmCommunicationRegionTable.h\r
356 gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}\r
5fc1ae69 357\r
4b1bf81c 358[Ppis]\r
ea060cfa 359 ## Include/Ppi/AtaController.h\r
360 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
361\r
4b1bf81c 362 ## Include/Ppi/UsbHostController.h\r
363 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
364\r
365 ## Include/Ppi/Usb2HostController.h\r
366 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
367\r
368 ## Include/Ppi/UsbController.h\r
369 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
370\r
371 ## Include/Ppi/UsbIo.h\r
372 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
373\r
ce2f13a3 374 ## Include/Ppi/SecPerformance.h\r
375 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
376\r
9fba8e7d 377 ## Include/Ppi/SmmCommunication.h\r
378 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
379\r
e7b7db36 380 ## Include/Ppi/SmmAccess.h\r
381 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
382\r
3e4df77f 383 ## Include/Ppi/SmmControl.h\r
384 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
385\r
78df32f2 386 ## Include/Ppi/PostBootScriptTable.h\r
387 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
388\r
883e23d0
LG
389 ## Include/Ppi/SerialPortPei.h\r
390 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
391\r
0591696e
FT
392 ## Include/Ppi/UfsHostController.h\r
393 gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
394\r
54b330a4
DB
395 ## Include/Ppi/IpmiPpi.h\r
396 gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}\r
397\r
48555339
FT
398 ## Include/Ppi/SdMmcHostController.h\r
399 gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}\r
400\r
6bfbb5f0 401[Protocols]\r
023c0fec 402 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
a90ccab8
LG
403 # Include/Protocol/LoadPe32Image.h\r
404 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
405 # If developer need implement such functionality, they should use BasePeCoffLib.\r
023c0fec 406 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
73850864 407\r
504dcb0a 408 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
a90ccab8 409 # Include/Protocol/Print2.h\r
504dcb0a 410 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
2dd4c603 411\r
346cf9ac 412 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
a90ccab8 413 # Include/Protocol/GenericMemoryTest.h\r
351986ae 414 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
73850864 415\r
55e4e173 416 ## Include/Protocol/Dpc.h\r
36ee91ca 417 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
73850864 418\r
85e923a5
LG
419 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
420 # Include/Protocol/FaultTolerantWrite.h\r
421 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
73850864 422\r
8a2d4996 423 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
424 # Include/Protocol/SmmFaultTolerantWrite.h\r
425 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
5fc1ae69 426\r
85e923a5
LG
427 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
428 # Include/Protocol/SwapAddressRange.h\r
429 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
5fc1ae69 430\r
8a2d4996 431 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
432 # Include/Protocol/SmmSwapAddressRange.h\r
433 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
5fc1ae69 434\r
8a2d4996 435 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
436 # Include/Protocol/SmmVariableProtocol.h\r
437 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
438\r
ff843847
RN
439 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
440 # Include/Protocol/VariableLock.h\r
441 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
442\r
efb01a10
SZ
443 ## Include/Protocol/VarCheck.h\r
444 gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }\r
445\r
446 ## Include/Protocol/SmmVarCheck.h\r
447 gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }\r
448\r
8a2d4996 449 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
450 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
451 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
73850864 452\r
62a5bf63 453 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
5fc1ae69 454 # Include/Guid/DebugMask.h\r
62a5bf63 455 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
1c837cd5 456\r
457 ## Include/Protocol/LockBox.h\r
458 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
5fc1ae69 459\r
0a48ffb0 460 ## Include/Protocol/FormBrowserEx.h\r
48a9d5f7
LG
461 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
462\r
c8ad2d7a
LG
463 ## Include/Protocol/EbcVmTest.h\r
464 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
465\r
466 ## Include/Protocol/EbcSimpleDebugger.h\r
467 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
e2988e66 468\r
469 ## Include/Protocol/BootLogo.h\r
470 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
471\r
7c6c064c
ED
472 ## Include/Protocol/DisplayProtocol.h\r
473 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
474\r
475 ## Include/Protocol/FormBrowserEx2.h\r
476 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
477\r
0591696e
FT
478 ## Include/Protocol/UfsHostController.h\r
479 gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
5fc1ae69 480\r
8d51e87d
CZ
481 ## Include/Protocol/EsrtManagement.h\r
482 gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
0591696e 483\r
53ec4d7f
SZ
484 ## Include/Protocol/SmmExitBootServices.h\r
485 gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
486\r
487 ## Include/Protocol/SmmLegacyBoot.h\r
488 gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
489\r
490 ## Include/Protocol/SmmReadyToBoot.h\r
491 gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
492\r
6313eb25
RN
493 ## Include/Protocol/PlatformLogo.h\r
494 gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }\r
495\r
515575f7
ED
496 ## Include/Protocol/FileExplorer.h\r
497 gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
498\r
54b330a4
DB
499 ## Include/Protocol/IpmiProtocol.h\r
500 gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }\r
501 gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }\r
502\r
08a41a25
RN
503 ## PS/2 policy protocol abstracts the specific platform initialization and setting.\r
504 # Include/Protocol/Ps2Policy.h\r
505 gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }\r
506\r
fe44bae5
SZ
507#\r
508# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
509# 0x80000001 | Invalid value provided.\r
510# 0x80000002 | Reserved bits must be set to zero.\r
511# 0x80000003 | Incorrect progress code provided.\r
512# 0x80000004 | Invalid foreground color specified.\r
513# 0x80000005 | Invalid background color specified.\r
514# 0x80000006 | Incorrect error code provided.\r
515#\r
516\r
a86ae184 517[PcdsFeatureFlag]\r
fe44bae5
SZ
518 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r
519 # TRUE - Supports update capsule across a system reset.<BR>\r
520 # FALSE - Does not support update capsule across a system reset.<BR>\r
521 # @Prompt Enable update capsule across a system reset.\r
109e9a61 522 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
73850864 523\r
fe44bae5
SZ
524 ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r
525 # TRUE - All PCD PPI services will be produced.<BR>\r
526 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r
527 # @Prompt Enable full PEI PCD services.\r
f806dd27
LG
528 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
529\r
fe44bae5
SZ
530 ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r
531 # It can be disabled to save size.<BR><BR>\r
532 # TRUE - Device Path To Text Protocol will be produced.<BR>\r
533 # FALSE - Device Path To Text Protocol will not be produced.<BR>\r
534 # @Prompt Enable Device Path to Text support.\r
348c8131 535 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
73850864 536\r
fe44bae5
SZ
537 ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r
538 # It can be disabled to save size.<BR><BR>\r
539 # TRUE - Device Path From Text Protocol will be produced.<BR>\r
540 # FALSE - Device Path From Text Protocol will not be produced.<BR>\r
541 # @Prompt Enable Device Path From Text support.\r
348c8131 542 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
73850864 543\r
fe44bae5 544 ## Indicates if the statistics about variable usage will be collected. This information is\r
fc9da5a6 545 # stored as a vendor configuration table into the EFI system table.\r
fe44bae5
SZ
546 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
547 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r
548 # TRUE - Statistics about variable usage will be collected.<BR>\r
549 # FALSE - Statistics about variable usage will not be collected.<BR>\r
550 # @Prompt Enable variable statistics collection.\r
33a5a666 551 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
73850864 552\r
fe44bae5
SZ
553 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r
554 # TRUE - Installs Unicode Collation Protocol.<BR>\r
555 # FALSE - Does not install Unicode Collation Protocol.<BR>\r
556 # @Prompt Enable Unicode Collation support.\r
ac12a167 557 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
73850864 558\r
fe44bae5
SZ
559 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r
560 # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r
561 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r
562 # @Prompt Enable Unicode Collation 2 support.\r
ac12a167 563 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
73850864 564\r
fe44bae5
SZ
565 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
566 # It could be set FALSE to save size.<BR><BR>\r
567 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
568 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
569 # @Prompt Enable ConOut GOP support.\r
d0c64728 570 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
73850864 571\r
fe44bae5
SZ
572 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
573 # It could be set FALSE to save size.<BR><BR>\r
574 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
575 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
576 # @Prompt Enable ConOut UGA support.\r
d0c64728 577 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
73850864 578\r
fe44bae5
SZ
579 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r
580 # This PCD is used to tune PEI phase performance to reduce the search image time.\r
581 # It can be set according to the generated image section type.<BR><BR>\r
582 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r
583 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r
584 # @Prompt PeiCore search TE section first.\r
3076397e 585 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
73850864 586\r
fe44bae5
SZ
587 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
588 # interrupt to access usb device in the case of absence of usb stack.\r
589 # DUET platform requires the token to be TRUE.<BR><BR>\r
590 # TRUE - Turn off usb legacy support.<BR>\r
591 # FALSE - Does not turn off usb legacy support.<BR>\r
35c77dae 592 # @Prompt Turn off USB legacy support.\r
cc582cff 593 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
5fc1ae69 594\r
fe44bae5
SZ
595 ## Indicates if HiiImageProtocol will be installed.\r
596 # FALSE is for size reduction.<BR><BR>\r
597 # TRUE - Installs HiiImageProtocol.<BR>\r
598 # FALSE - Does not install HiiImageProtocol.<BR>\r
599 # @Prompt Enable HII image support.\r
813acf3a 600 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
73850864 601\r
fe44bae5 602 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r
a8e1ed54 603 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
fe44bae5
SZ
604 # from HII database.<BR><BR>\r
605 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r
606 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r
607 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
813acf3a 608 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 609\r
fe44bae5
SZ
610 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
611 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
612 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
613 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
614 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
615 # @Prompt Enable framework backward compatibility support.\r
f806dd27 616 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
73850864 617\r
fe44bae5
SZ
618 ## Indicates if HelloWorld Application will print the verbose information.\r
619 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
620 # TRUE - HelloWorld Application will print the verbose information.<BR>\r
621 # FALSE - HelloWorld Application will not print the verbose information.<BR>\r
622 # @Prompt Enable HelloWorld print.\r
223c22d8 623 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 624\r
fe44bae5
SZ
625 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r
626 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r
627 # FALSE - Only FTW Write service is available.<BR>\r
628 # @Prompt Enable FULL FTW services.\r
72670d3e 629 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
630\r
fe44bae5
SZ
631 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r
632 # TRUE - DXE IPL will support UEFI decompression.<BR>\r
633 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r
634 # @Prompt Enable UEFI decompression support in DXE IPL.\r
72670d3e 635 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 636\r
fe44bae5
SZ
637 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r
638 # TRUE - PciBus driver supports the hot plug device.<BR>\r
639 # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r
640 # @Prompt Enable PciBus hot plug device support.\r
9060e3ec 641 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
642\r
fe44bae5
SZ
643 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r
644 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
645 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
646 # @Prompt Enable PCI bridge IO alignment probe.\r
b3ec9b56 647 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
fe44bae5
SZ
648\r
649 ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r
650 # TRUE - Reports StatusCode via Serial port.<BR>\r
651 # FALSE - Does not report StatusCode via Serial port.<BR>\r
652 # @Prompt Enable StatusCode via Serial port.\r
10c5d87e 653 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
654\r
fe44bae5
SZ
655 ## Indicates if StatusCode is stored in memory.\r
656 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r
657 # TRUE - Stores StatusCode in memory.<BR>\r
658 # FALSE - Does not store StatusCode in memory.<BR>\r
659 # @Prompt Enable StatusCode via memory.\r
10c5d87e 660 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
661\r
fe44bae5
SZ
662 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r
663 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r
664 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r
665 # @Prompt Enable PEI StatusCode replay in DXE phase\r
10c5d87e 666 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
9060e3ec 667\r
fe44bae5
SZ
668 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r
669 # TRUE - Installs ACPI SDT protocol.<BR>\r
670 # FALSE - Does not install ACPI SDT protocol.<BR>\r
671 # @Prompt Enable ACPI SDT support.\r
3dc8585e
JY
672 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
673\r
fe44bae5
SZ
674 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
675 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r
676 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
677 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
678 # @Prompt Enable unaligned PCI I/O support.\r
aeeb84ba 679 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
11232773 680\r
fe44bae5
SZ
681 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r
682 # TRUE - TEXT statement will always be set to GrayOut.<BR>\r
683 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r
684 # @Prompt Always GrayOut TEXT statement.\r
11232773 685 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
fe44bae5
SZ
686\r
687 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r
688 # TRUE - The unselectable menu will be set to GrayOut.<BR>\r
689 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r
690 # @Prompt GrayOut read only menu.\r
0777cea6
ED
691 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
692\r
fe44bae5
SZ
693 ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r
694 # TRUE - Supports recovery from IDE disk.<BR>\r
695 # FALSE - Does not support recovery from IDE disk.<BR>\r
696 # @Prompt Enable recovery on IDE disk.\r
74ef1d42 697 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
698\r
fe44bae5
SZ
699 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r
700 # TRUE - Supports recovery from FAT floppy disk.<BR>\r
701 # FALSE - Does not support recovery from FAT floppy disk.<BR>\r
702 # @Prompt Enable recovery on FAT floppy disk.\r
74ef1d42 703 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
704\r
fe44bae5
SZ
705 ## Indicates if recovery from data CD will be supported.<BR><BR>\r
706 # TRUE - Supports recovery from data CD.<BR>\r
707 # FALSE - Does not support recovery from data CD.<BR>\r
708 # @Prompt Enable recovery on data CD.\r
74ef1d42 709 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
710\r
fe44bae5
SZ
711 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r
712 # TRUE - Supports recovery from USB disk.<BR>\r
713 # FALSE - Does not support recovery from USB disk.<BR>\r
714 # @Prompt Enable recovery on FAT USB disk.\r
74ef1d42 715 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
716\r
fe44bae5
SZ
717 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r
718 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r
719 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r
720 # @Prompt Enable S3 performance data support.\r
0284e90c
LG
721 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
722\r
4aa68cbc
RN
723 ## Indicates if PS2 keyboard does a extended verification during start.\r
724 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
725 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
726 # TRUE - Turn on PS2 keyboard extended verification.<BR>\r
727 # FALSE - Turn off PS2 keyboard extended verification.<BR>\r
728 # @Prompt Turn on PS2 Keyboard Extended Verification\r
729 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072\r
730\r
a59e2ede
RN
731 ## Indicates if Serial device uses half hand shake.<BR><BR>\r
732 # TRUE - Serial device uses half hand shake.<BR>\r
733 # FALSE - Serial device doesn't use half hand shake.<BR>\r
734 # @Prompt Enable Serial device Half Hand Shake\r
735 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073\r
736\r
8a45f80e
DB
737 ## Indicates if HII data and configuration has been exported.<BR><BR>\r
738 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
739 # simulator platform because the performance cost for this feature.\r
740 # TRUE - Export HII data and configuration data.<BR>\r
741 # FALSE - Does not export HII data and configuration.<BR>\r
742 # @Prompt Enable export HII data and configuration to be used in OS runtime.\r
743 gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074\r
744\r
77833d0b
RN
745 ## Indicates if PS2 mouse does a extended verification during start.\r
746 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
747 # TRUE - Turn on PS2 mouse extended verification. <BR>\r
748 # FALSE - Turn off PS2 mouse extended verification. <BR>\r
749 # @Prompt Turn on PS2 Mouse Extended Verification\r
750 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075\r
751\r
065ae7d7
AB
752[PcdsFeatureFlag.X64]\r
753 ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM\r
754 # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),\r
755 # which requires that all PCI MMIO BARs are located below 4 GB\r
756 # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM\r
757 # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM\r
758 # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs\r
759 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a\r
760\r
761[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]\r
762 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a\r
763\r
5d2311be 764[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
fe44bae5
SZ
765 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
766 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
767 # is built in firmware.<BR><BR>\r
768 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r
769 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r
770 # @Prompt DxeIpl switch to long mode.\r
4e17cc90 771 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
772\r
fe44bae5
SZ
773 ## Indicates if DxeIpl should rebuild page tables. This flag only\r
774 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r
775 # TRUE - DxeIpl will rebuild page tables.<BR>\r
776 # FALSE - DxeIpl will not rebuild page tables.<BR>\r
777 # @Prompt DxeIpl rebuild page tables.\r
e47f0da4 778 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
779\r
a86ae184 780[PcdsFixedAtBuild]\r
fe44bae5
SZ
781 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r
782 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r
783 # 0: Disable the feature.<BR>\r
784 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r
785 # @Prompt Enable LMFA feature.\r
786 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r
54ea99a7 787 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
d13e7bda 788\r
fe44bae5
SZ
789 ## Progress Code for OS Loader LoadImage start.<BR><BR>\r
790 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r
791 # @Prompt Progress Code for OS Loader LoadImage start.\r
792 # @ValidList 0x80000003 | 0x03058000\r
eab90a61 793 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
794\r
fe44bae5
SZ
795 ## Progress Code for OS Loader StartImage start.<BR><BR>\r
796 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r
797 # @Prompt Progress Code for OS Loader StartImage start.\r
798 # @ValidList 0x80000003 | 0x03058001\r
eab90a61 799 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
800\r
fe44bae5
SZ
801 ## Progress Code for S3 Suspend start.<BR><BR>\r
802 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r
803 # @Prompt Progress Code for S3 Suspend start.\r
804 # @ValidList 0x80000003 | 0x03078000\r
eab90a61 805 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
806\r
fe44bae5
SZ
807 ## Progress Code for S3 Suspend end.<BR><BR>\r
808 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r
809 # @Prompt Progress Code for S3 Suspend end.\r
810 # @ValidList 0x80000003 | 0x03078001\r
eab90a61 811 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
812\r
fe44bae5
SZ
813 ## Error Code for SetVariable failure.<BR><BR>\r
814 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r
815 # @Prompt Error Code for SetVariable failure.\r
816 # @ValidList 0x80000006 | 0x03058002\r
69fc8f08
RN
817 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
818\r
fe44bae5
SZ
819[PcdsFixedAtBuild, PcdsPatchableInModule]\r
820 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
821 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
822 # for a dynamic PCD used in PEI phase.\r
823 # @Prompt Max PEI PCD callback number per PCD entry.\r
824 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
825\r
35c77dae 826 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r
adcd7381 827 # to store PCD value.\r
fe44bae5 828 # @Prompt VPD base address.\r
adcd7381
SZ
829 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
830\r
fe781940
SZ
831 ## Maximum number of FV is supported by PeiCore's dispatching.\r
832 # @Prompt Maximum number of FV supported by PeiCore.\r
833 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
834\r
835 ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
836 # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
837 # @Prompt Maximum File count per FV supported by PeiCore.\r
838 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
839\r
fe44bae5
SZ
840 ## Maximum stack size for PeiCore.\r
841 # @Prompt Maximum stack size for PeiCore.\r
842 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
843\r
fe781940
SZ
844 ## Maximum PPI count is supported by PeiCore's PPI database.\r
845 # @Prompt Maximum PPI count supported by PeiCore.\r
846 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
847\r
fe44bae5
SZ
848 ## The maximum size of a single non-HwErr type variable.\r
849 # @Prompt Maximum variable size.\r
850 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
851\r
8457d0e7
SZ
852 ## The maximum size of a single authenticated variable.\r
853 # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
854 # @Prompt Maximum authenticated variable size.\r
855 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
856\r
fe44bae5
SZ
857 ## The maximum size of single hardware error record variable.<BR><BR>\r
858 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
859 # In IA64 platforms, this value should be larger than 128KB.<BR>\r
860 # @Prompt Maximum HwErr variable size.\r
861 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
862\r
4edb1866 863 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
fe44bae5 864 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
4edb1866 865 # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
fe44bae5
SZ
866 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
867 # @Prompt HwErr variable storage size.\r
868 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
869\r
4edb1866
SZ
870 ## The size of maximum user NV variable space.<BR><BR>\r
871 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
872 # If the value is 0, it means user variable share the same NV storage with system variable,\r
873 # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>\r
7cff4456 874 # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,\r
4edb1866
SZ
875 # otherwise the variable will be regarded as user variable.<BR>\r
876 # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>\r
877 # 2) Variables managed by Variable driver internally.<BR>\r
878 # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>\r
7cff4456 879 # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>\r
4edb1866
SZ
880 # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>\r
881 # @Prompt Maximum user NV variable space size.\r
882 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009\r
883\r
884 ## The size of NV variable space reserved at UEFI boottime.<BR><BR>\r
885 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
886 # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.\r
887 # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>\r
888 # Then the common NV variable space size at boottime will be\r
889 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>\r
890 # and the common NV variable space size at runtime will be\r
891 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>\r
892 # @Prompt Boottime reserved NV variable space size.\r
893 gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007\r
894\r
0fb5e515
SZ
895 ## Reclaim variable space at EndOfDxe.<BR><BR>\r
896 # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>\r
897 # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>\r
898 # @Prompt Reclaim variable space at EndOfDxe.\r
899 gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008\r
900\r
fe44bae5
SZ
901 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r
902 # @Prompt Variable storage size.\r
903 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
904\r
905 ## FFS filename to find the ACPI tables.\r
906 # @Prompt FFS name of ACPI tables storage.\r
907 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
908\r
909 ## FFS filename to find the capsule coalesce image.\r
910 # @Prompt FFS name of capsule coalesce image.\r
911 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
912\r
35c77dae 913 ## Maximum number of performance log entries during PEI phase.\r
7c50b343
CS
914 # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is\r
915 # more than 255.\r
35c77dae 916 # @Prompt Maximum number of PEI performance log entries.\r
348c8131 917 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 918\r
7c50b343
CS
919 ## Maximum number of performance log entries during PEI phase.\r
920 # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of\r
921 # entries. If greater than 0, then this PCD determines the number of entries,\r
922 # and PcdMaxPeiPerformanceLogEntries is ignored.\r
923 # @Prompt Maximum number of PEI performance log entries.\r
924 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035\r
925\r
fe44bae5
SZ
926 ## RTC Update Timeout Value(microsecond).\r
927 # @Prompt RTC Update Timeout Value.\r
4e17cc90 928 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
73850864 929\r
fe44bae5
SZ
930 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r
931 # TRUE - 16550 serial port registers are in MMIO space.<BR>\r
932 # FALSE - 16550 serial port registers are in I/O space.<BR>\r
933 # @Prompt Serial port registers use MMIO.\r
467d15ae 934 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
fe44bae5
SZ
935\r
936 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
937 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
938 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
939 # @Prompt Enable serial port hardware flow control.\r
467d15ae 940 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
941\r
fe44bae5
SZ
942 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r
943 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r
944 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r
945 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
946 # @Prompt Enable serial port cable detetion.\r
784ce127 947 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
5fc1ae69 948\r
fe44bae5
SZ
949 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
950 # @Prompt Base address of serial port registers.\r
467d15ae 951 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
952\r
953 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
fe44bae5
SZ
954 # @Prompt Baud rate for serial port.\r
955 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r
467d15ae 956 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
957\r
fe44bae5
SZ
958 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r
959 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r
960 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r
961 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r
962 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 963 #\r
fe44bae5
SZ
964 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r
965 # @Prompt Serial port Line Control settings.\r
966 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r
467d15ae 967 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
968\r
fe44bae5
SZ
969 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r
970 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r
971 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r
972 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r
973 # BIT4..BIT3 - Reserved. Must be 0.<BR>\r
974 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r
975 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 976 #\r
fe44bae5
SZ
977 # Default is to enable and clear all FIFOs.<BR>\r
978 # @Prompt Serial port FIFO Control settings.\r
979 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
467d15ae 980 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
981\r
3ddcceea 982 ## This setting can override the default TFTP block size. A value of 0 computes\r
983 # the default from MTU information. A non-zero value will be used as block size\r
984 # in bytes.\r
fe44bae5
SZ
985 # @Prompt TFTP block size.\r
986 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
987\r
6eea8eae 988 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
fe44bae5 989 # structure. The default value for this PCD is 0, which means that the DXE Core\r
6eea8eae 990 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
5fc1ae69 991 # boundary as close to the top of memory as feasible. If this PCD is set to a\r
fe44bae5 992 # value other than 0, then the DXE Core will first attempt to allocate the\r
6eea8eae
LG
993 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
994 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
995 # boundary as close to the top of memory as feasible.\r
fe44bae5 996 # @Prompt Maximum Efi System Table Pointer address.\r
6eea8eae 997 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
838a9c58 998\r
fe44bae5
SZ
999 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
1000 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
1001 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
5fc1ae69 1002 # @Prompt Shadow Peim On S3 Boot.\r
5d7f3126
LG
1003 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
1004\r
3d44658c 1005 ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
5fc1ae69 1006 # This PCD is used on other boot path except for S3 boot.\r
3d44658c
LG
1007 # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
1008 # FALSE - Not shadow PEIM after memory is ready.<BR>\r
1009 # @Prompt Shadow Peim and PeiCore on boot\r
1010 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
1011\r
84edd20b
SZ
1012 ## The mask is used to control memory profile behavior.<BR><BR>\r
1013 # BIT0 - Enable UEFI memory profile.<BR>\r
1014 # BIT1 - Enable SMRAM profile.<BR>\r
94092aa6 1015 # BIT7 - Disable recording at the start.<BR>\r
84edd20b 1016 # @Prompt Memory Profile Property.\r
94092aa6 1017 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0\r
84edd20b
SZ
1018 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
1019\r
1020 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
1021 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
1022 #\r
1023 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
1024 # EfiReservedMemoryType 0x0001<BR>\r
1025 # EfiLoaderCode 0x0002<BR>\r
1026 # EfiLoaderData 0x0004<BR>\r
1027 # EfiBootServicesCode 0x0008<BR>\r
1028 # EfiBootServicesData 0x0010<BR>\r
1029 # EfiRuntimeServicesCode 0x0020<BR>\r
1030 # EfiRuntimeServicesData 0x0040<BR>\r
1031 # EfiConventionalMemory 0x0080<BR>\r
1032 # EfiUnusableMemory 0x0100<BR>\r
1033 # EfiACPIReclaimMemory 0x0200<BR>\r
1034 # EfiACPIMemoryNVS 0x0400<BR>\r
1035 # EfiMemoryMappedIO 0x0800<BR>\r
1036 # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
1037 # EfiPalCode 0x2000<BR>\r
8f2f2f19 1038 # EfiPersistentMemory 0x4000<BR>\r
db9b00f1 1039 # OEM Reserved 0x4000000000000000<BR>\r
84edd20b
SZ
1040 # OS Reserved 0x8000000000000000<BR>\r
1041 #\r
1042 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
1043 #\r
1044 # @Prompt Memory profile memory type.\r
1045 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
1046\r
94092aa6
SZ
1047 ## This PCD is to control which drivers need memory profile data.<BR><BR>\r
1048 # For example:<BR>\r
1049 # One image only (Shell):<BR>\r
1050 # Header GUID<BR>\r
1051 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
1052 # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
1053 # Two or more images (Shell + WinNtSimpleFileSystem):<BR>\r
1054 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
1055 # 0x7F, 0x01, 0x04, 0x00,<BR>\r
1056 # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>\r
1057 # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
1058 # @Prompt Memory profile driver path.\r
1059 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043\r
1060\r
31122d8c 1061 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
5fc1ae69
DB
1062 # information that describes the path that contains zero or more PCI to PCI briges\r
1063 # followed by a PCI serial device. Each array entry is 4-bytes in length. The\r
1064 # first byte is the PCI Device Number, then second byte is the PCI Function Number,\r
1065 # and the last two bytes are the offset to the PCI power management capabilities\r
1066 # register used to manage the D0-D3 states. If a PCI power management capabilities\r
1067 # register is not present, then the last two bytes in the offset is set to 0. The\r
1068 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a\r
31122d8c
LG
1069 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
1070 # @Prompt Pci Serial Device Info\r
1071 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
1072\r
a59e2ede 1073 ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,\r
5fc1ae69 1074 # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that\r
a59e2ede
RN
1075 # describes the parameters of special PCI serial devices.\r
1076 # Each array entry is 24-byte in length. The array is terminated\r
1077 # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a\r
1078 # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.\r
ff3b043f
RN
1079 # The C style structure is defined as below:<BR>\r
1080 # typedef struct {<BR>\r
1081 # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>\r
1082 # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>\r
1083 # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>\r
1084 # UINT64 Offset; ///< The byte offset into to the BAR.<BR>\r
1085 # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>\r
1086 # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>\r
1087 # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
1088 # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
1089 # UINT8 Reserved[2];<BR>\r
1090 # } PCI_SERIAL_PARAMETER;<BR>\r
1091 # It contains zero or more instances of the above structure.<BR>\r
a59e2ede
RN
1092 # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs\r
1093 # to contain two instances of the above structure, with the VendorId and DeviceId\r
1094 # equals to the Device ID and Vendor ID of the device; If the PCI device uses the\r
1095 # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and\r
1096 # BarIndex of second one equals to 1; If the PCI device uses the first BAR to\r
1097 # support both UARTs, BarIndex of both instance equals to 0, Offset of first\r
1098 # instance equals to 0 and Offset of second one equals to a value bigger than or\r
ff3b043f 1099 # equal to 8.<BR>\r
a59e2ede
RN
1100 # For certain UART whose register needs to be accessed in DWORD aligned address,\r
1101 # RegisterStride equals to 4.\r
1102 # @Prompt Pci Serial Parameters\r
1103 gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071\r
1104\r
5fc1ae69 1105 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.\r
35c77dae 1106 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
31122d8c 1107 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
5fc1ae69 1108\r
1d112229
RN
1109 ## This PCD points to the file name GUID of the BootManagerMenuApp\r
1110 # Platform can customize the PCD to point to different application for Boot Manager Menu\r
a9890ea5 1111 # @Prompt Boot Manager Menu File\r
1d112229
RN
1112 gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
1113\r
1114 ## This PCD points to the formset GUID of the driver health management form\r
1115 # The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
1116 # Platform can customize the PCD to point to different formset.\r
a9890ea5 1117 # @Prompt Driver Health Management Form\r
1d112229
RN
1118 gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
1119\r
cd68e4a8
MK
1120 ## The number of bytes between registers in serial device. The default is 1 byte.\r
1121 # @Prompt Serial Port Register Stride in Bytes\r
1eb904a6 1122 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
5630cdfe 1123\r
1241af95
SZ
1124 ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
1125 # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
1126 # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
1127 # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
1128 gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
1129\r
f9bbb8d9
AB
1130 ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS\r
1131 # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h\r
1132 # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>\r
1133 # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>\r
1134 # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>\r
1135 # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>\r
1136 # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>\r
1137 # @Prompt Exposed ACPI table versions.\r
1138 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c\r
1139\r
b34e4461
GL
1140 ## This PCD defines the MAX repair count.\r
1141 # The default value is 0 that means infinite.\r
1142 # @Prompt MAX repair count\r
1143 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076\r
1144\r
be046357 1145[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
fe44bae5
SZ
1146 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
1147 # This PCD could be set to 0 then console output would be at max column and max row.\r
1148 # @Prompt Console output row.\r
4bfa7dc4 1149 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
73850864 1150\r
60d73737 1151 ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
fe44bae5
SZ
1152 # This PCD could be set to 0 then console output would be at max column and max row.\r
1153 # @Prompt Console output column.\r
4e17cc90 1154 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
73850864 1155\r
b9b5e307 1156 ## This PCD defines the video horizontal resolution.\r
fe44bae5
SZ
1157 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
1158 # @Prompt Video horizontal resolution.\r
b9b5e307 1159 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
1160\r
1161 ## This PCD defines the video vertical resolution.\r
fe44bae5
SZ
1162 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
1163 # @Prompt Video vertical resolution.\r
b9b5e307 1164 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
1165\r
4e5c0d12
RN
1166 # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r
1167 # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r
1168 # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r
1169 # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r
1170 # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r
1171 # for text setup.\r
1172\r
1173 ## Specify the video horizontal resolution of text setup.\r
1174 # @Prompt Video Horizontal Resolution of Text Setup\r
1175 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r
1176\r
1177 ## Specify the video vertical resolution of text setup.\r
1178 # @Prompt Video Vertical Resolution of Text Setup\r
1179 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r
1180\r
1181 ## Specify the console output column of text setup.\r
1182 # @Prompt Console Output Column of Text Setup\r
1183 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r
1184\r
1185 ## Specify the console output row of text setup.\r
1186 # @Prompt Console Output Row of Text Setup\r
1187 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
1188\r
fe44bae5 1189[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
b2a41b1e
RN
1190 ## UART clock frequency is for the baud rate configuration.\r
1191 # @Prompt Serial Port Clock Rate.\r
1192 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
1193\r
5e30b69e
DB
1194 ## This PCD points to the front page formset GUID\r
1195 # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
a9890ea5 1196 # @Prompt Front Page Formset.\r
5e30b69e
DB
1197 gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
1198\r
fe44bae5
SZ
1199 ## Base address of the NV variable range in flash device.\r
1200 # @Prompt Base address of flash NV variable range.\r
a86ae184 1201 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
73850864 1202\r
fe44bae5
SZ
1203 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r
1204 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1205 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1206 # be reflushed through the manner of fault tolerant write.\r
1207 # @Prompt Size of flash NV variable range.\r
1208 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
1209\r
2c4b18e0 1210 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 1211 # @Prompt Base address of flash FTW spare block range.\r
73850864 1212 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
1213\r
fe44bae5
SZ
1214 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
1215 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1216 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1217 # be reflushed through the manner of fault tolerant write.\r
1218 # @Prompt Size of flash FTW spare block range.\r
1219 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
1220\r
a86ae184 1221 ## Base address of the FTW working block range in flash device.\r
0d3edd9d 1222 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 1223 # @Prompt Base address of flash FTW working block range.\r
73850864 1224 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
1225\r
fe44bae5 1226 ## Size of the FTW working block range.\r
0d3edd9d
SZ
1227 # If the value is less than one block size, the work space range should not span blocks.\r
1228 # If the value is larger than one block size, it should be block size aligned.\r
fe44bae5
SZ
1229 # @Prompt Size of flash FTW working block range.\r
1230 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
1231\r
1232 ## 64-bit Base address of the NV variable range in flash device.\r
1233 # @Prompt 64-bit Base address of flash NV variable range.\r
92a4f6f3 1234 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
1235\r
2c4b18e0 1236 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 1237 # @Prompt 64-bit Base address of flash FTW spare block range.\r
92a4f6f3 1238 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
1239\r
1240 ## 64-bit Base address of the FTW working block range in flash device.\r
0d3edd9d 1241 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 1242 # @Prompt 64-bit Base address of flash FTW working block range.\r
92a4f6f3 1243 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
1244\r
fe44bae5
SZ
1245 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
1246 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
1247 # @Prompt Reserved memory range for EMU variable NV storage.\r
02328a57 1248 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
1249\r
a90ccab8 1250 ## This PCD defines the times to print hello world string.\r
fe44bae5
SZ
1251 # This PCD is a sample to explain UINT32 PCD usage.\r
1252 # @Prompt HellowWorld print times.\r
4e17cc90 1253 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 1254\r
fe44bae5
SZ
1255 ## This PCD defines the HelloWorld print string.\r
1256 # This PCD is a sample to explain String typed PCD usage.\r
1257 # @Prompt HelloWorld print string.\r
1258 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
1259\r
1260 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r
73850864 1261 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
fe44bae5 1262 # @Prompt Max size of populated capsule.\r
4e17cc90 1263 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
73850864 1264\r
fe44bae5 1265 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r
0ef42f88 1266 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
fe44bae5 1267 # @Prompt Max size of non-populated capsule.\r
4e17cc90 1268 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 1269\r
fe44bae5
SZ
1270 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r
1271 # @Prompt Firmware vendor.\r
e026f005 1272 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
73850864 1273\r
fe44bae5
SZ
1274 ## Firmware revision that is the default revision filled into the EFI System Table.\r
1275 # @Prompt Firmware revision.\r
6144e7af 1276 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
1277\r
fe44bae5
SZ
1278 ## Null-terminated Unicode string that describes the firmware version.\r
1279 # @Prompt Firmware version string.\r
73850864 1280 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
1281\r
fe44bae5
SZ
1282 ## Null-terminated Unicode string that contains the date the firmware was released\r
1283 # @Prompt Firmware release data string.\r
6144e7af 1284 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
1285\r
fe44bae5
SZ
1286 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r
1287 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r
1288 # The default value in PeiPhase is 1 KBytes.<BR>\r
1289 # The default value in DxePhase is 128 KBytes.<BR>\r
1290 # @Prompt StatusCode memory size.\r
10c5d87e 1291 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
1292\r
fe44bae5
SZ
1293 ## Indicates if to reset system when memory type information changes.<BR><BR>\r
1294 # TRUE - Resets system when memory type information changes.<BR>\r
1295 # FALSE - Does not reset system when memory type information changes.<BR>\r
1296 # @Prompt Reset on memory type information change.\r
dad63934
RN
1297 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
1298\r
f0a1bf11 1299 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
fe44bae5
SZ
1300 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1301 # 0x00 (EFI_BLACK)<BR>\r
1302 # 0x01 (EFI_BLUE)<BR>\r
1303 # 0x02 (EFI_GREEN)<BR>\r
1304 # 0x03 (EFI_CYAN)<BR>\r
1305 # 0x04 (EFI_RED)<BR>\r
1306 # 0x05 (EFI_MAGENTA)<BR>\r
1307 # 0x06 (EFI_BROWN)<BR>\r
1308 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1309 # 0x08 (EFI_DARKGRAY)<BR>\r
1310 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1311 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1312 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1313 # 0x0C (EFI_LIGHTRED)<BR>\r
1314 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1315 # 0x0E (EFI_YELLOW)<BR>\r
1316 # 0x0F (EFI_WHITE)<BR>\r
1317 # @Prompt Foreground color for browser subtile.\r
1318 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11 1319 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
5fc1ae69 1320\r
f0a1bf11 1321 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
fe44bae5
SZ
1322 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1323 # 0x00 (EFI_BLACK)<BR>\r
1324 # 0x01 (EFI_BLUE)<BR>\r
1325 # 0x02 (EFI_GREEN)<BR>\r
1326 # 0x03 (EFI_CYAN)<BR>\r
1327 # 0x04 (EFI_RED)<BR>\r
1328 # 0x05 (EFI_MAGENTA)<BR>\r
1329 # 0x06 (EFI_BROWN)<BR>\r
1330 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1331 # 0x08 (EFI_DARKGRAY)<BR>\r
1332 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1333 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1334 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1335 # 0x0C (EFI_LIGHTRED)<BR>\r
1336 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1337 # 0x0E (EFI_YELLOW)<BR>\r
1338 # 0x0F (EFI_WHITE)<BR>\r
1339 # @Prompt Foreground color for browser field.\r
1340 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11 1341 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
5fc1ae69 1342\r
f0a1bf11 1343 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ
1344 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
1345 # 0x00 (EFI_BLACK)<BR>\r
1346 # 0x01 (EFI_BLUE)<BR>\r
1347 # 0x02 (EFI_GREEN)<BR>\r
1348 # 0x03 (EFI_CYAN)<BR>\r
1349 # 0x04 (EFI_RED)<BR>\r
1350 # 0x05 (EFI_MAGENTA)<BR>\r
1351 # 0x06 (EFI_BROWN)<BR>\r
1352 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1353 # 0x08 (EFI_DARKGRAY)<BR>\r
1354 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1355 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1356 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1357 # 0x0C (EFI_LIGHTRED)<BR>\r
1358 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1359 # 0x0E (EFI_YELLOW)<BR>\r
1360 # 0x0F (EFI_WHITE)<BR>\r
1361 # @Prompt Foreground color for highlighted browser field.\r
1362 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11 1363 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
5fc1ae69 1364\r
f0a1bf11 1365 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ
1366 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
1367 # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
1368 # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r
1369 # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r
1370 # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r
1371 # 0x40 (EFI_BACKGROUND_RED)<BR>\r
1372 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r
1373 # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r
1374 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r
1375 # @Prompt Background color for highlighted browser field.\r
1376 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r
f0a1bf11
LG
1377 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
1378\r
ea060cfa 1379 ## Time in second to delay for SATA devices to spin-up for recovery.\r
fe44bae5 1380 # @Prompt SATA spin-up delay time in second for recovery path.\r
ea060cfa 1381 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
1382\r
960f2d53
SZ
1383 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
1384 # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
1385 # When changing the value of this PCD, the platform developer should make sure the memory size is\r
1386 # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
fe44bae5 1387 # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
88d20adc 1388 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
1389\r
ab7017fe 1390 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
fe44bae5
SZ
1391 # The default size is 32K. When changing the value of this PCD, the platform developer should\r
1392 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r
1393 # @Prompt Stack size for CapsulePei transfer to long mode.\r
6bea3336 1394 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
ab7017fe 1395\r
fe44bae5
SZ
1396 ## Indicates if 1G page table will be enabled.<BR><BR>\r
1397 # TRUE - 1G page table will be enabled.<BR>\r
1398 # FALSE - 1G page table will not be enabled.<BR>\r
1399 # @Prompt Enable 1G page table support.\r
3ecd0155
JY
1400 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
1401\r
fe44bae5
SZ
1402 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r
1403 # TRUE - Single Root I/O virtualization is supported.<BR>\r
1404 # FALSE - Single Root I/O virtualization is not supported.<BR>\r
1405 # @Prompt Enable SRIOV support.\r
1406 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
1407\r
1408 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r
1409 # TRUE - Alternative Routing-ID is supported.<BR>\r
1410 # FALSE - Alternative Routing-ID is not supported.<BR>\r
1411 # @Prompt Enable ARI support.\r
1412 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
1413\r
1414 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r
1415 # TRUE - Multi Root I/O virtualization is supported.<BR>\r
1416 # FALSE - Multi Root I/O virtualization is not supported.<BR>\r
1417 # @Prompt Enable MRIOV support.\r
1418 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
1419\r
1420 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r
1421 # BITN set indicates 2 of n+12 power<BR>\r
1422 # BIT0 set indicates 4KB alignment<BR>\r
1423 # BIT1 set indicates 8KB alignment<BR>\r
1424 # @Prompt SRIOV system page size.\r
1425 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
1426\r
35c77dae
LG
1427 ## SMBIOS version.\r
1428 # @Prompt SMBIOS version.\r
54753b60 1429 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055\r
fe781940 1430\r
e63f3308
EL
1431 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1432 # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1433 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A\r
1434\r
1435 ## SMBIOS produce method.\r
1436 # BIT0 set indicates 32-bit entry point and table are produced.<BR>\r
1437 # BIT1 set indicates 64-bit entry point and table are produced.<BR>\r
1438 # @Prompt The policy to produce SMBIOS entry point and table.\r
1439 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069\r
1440\r
fe44bae5
SZ
1441 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
1442 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
1443 # @Prompt Pad size for extension FPDT boot records.\r
1c0cc375
LG
1444 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
1445\r
fe44bae5
SZ
1446 ## Indicates if ConIn device are connected on demand.<BR><BR>\r
1447 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
1448 # by Consplitter should be called before any real key read operation.<BR>\r
1449 # FALSE - ConIn device may be connected normally during BDS.<BR>\r
1450 # @Prompt ConIn connect on demand.\r
838a9c58 1451 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
1452\r
fe44bae5
SZ
1453 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r
1454 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r
1455 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r
1456 # @Prompt Enable ATA S.M.A.R.T feature.\r
0e185864 1457 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
1458\r
fe44bae5
SZ
1459 ## Indicates if full PCI enumeration is disabled.<BR><BR>\r
1460 # TRUE - Full PCI enumeration is disabled.<BR>\r
1461 # FALSE - Full PCI enumeration is not disabled.<BR>\r
1462 # @Prompt Disable full PCI enumeration.\r
5624a27d
WL
1463 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
1464\r
fe44bae5 1465 ## Disk I/O - Number of Data Buffer block.\r
e645bd85 1466 # Define the size in block of the pre-allocated buffer. It provide better\r
fe44bae5
SZ
1467 # performance for large Disk I/O requests.\r
1468 # @Prompt Disk I/O - Number of Data Buffer block.\r
e645bd85
OM
1469 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
1470\r
0591696e
FT
1471 ## This PCD specifies the PCI-based UFS host controller mmio base address.\r
1472 # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r
1473 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1474 # @Prompt Mmio base address of pci-based UFS host controller.\r
1475 gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
1476\r
8d51e87d
CZ
1477 ## Specify Max ESRT cache entry number supported for FMP instances\r
1478 #\r
1479 # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
1480 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
1481\r
1482 ## Specify Max ESRT cache entry number supported for Non FMP instances\r
1483 #\r
1484 # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
1485 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
1486\r
1487 ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
1488 #\r
1489 # @Prompt Flag to request system reboot after processing capsule.\r
1490 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
1491\r
03d486b2
JY
1492 ## Publish PropertiesTable or not.\r
1493 #\r
1494 # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
1495 # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
1496 # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
1497 # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
1498 # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
1499 #\r
1500 # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
1501 # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
1502 # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
1503 # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
1504 # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
1505 # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
1506 #\r
1507 # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
1508 # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
1509 # section. If PE code/data sections are merged, the result is unpredictable.\r
1510 #\r
cc260e62
JY
1511 # UEFI 2.6 specification does not recommend to use this BIT0 attribute.\r
1512 #\r
03d486b2 1513 # @Prompt Publish UEFI PropertiesTable.\r
cc260e62 1514 gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e\r
03d486b2 1515\r
f096950d
SZ
1516 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
1517 # @Prompt Default OEM ID for ACPI table creation.\r
1518 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
1519\r
1520 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
e90a0ee8 1521 # According to ACPI specification, this field is particularly useful when\r
44d1d2a8
JY
1522 # defining a definition block to distinguish definition block functions.\r
1523 # The OEM assigns each dissimilar table a new OEM Table ID.\r
1524 # This PCD is ignored for definition block.\r
f096950d
SZ
1525 # @Prompt Default OEM Table ID for ACPI table creation.\r
1526 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
1527\r
1528 ## Default OEM Revision for ACPI table creation.\r
e90a0ee8 1529 # According to ACPI specification, for LoadTable() opcode, the OS can also\r
44d1d2a8
JY
1530 # check the OEM Table ID and Revision ID against a database for a newer\r
1531 # revision Definition Block of the same OEM Table ID and load it instead.\r
1532 # This PCD is ignored for definition block.\r
f096950d
SZ
1533 # @Prompt Default OEM Revision for ACPI table creation.\r
1534 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
1535\r
1536 ## Default Creator ID for ACPI table creation.\r
e90a0ee8 1537 # According to ACPI specification, for tables containing Definition Blocks,\r
44d1d2a8
JY
1538 # this is the ID for the ASL Compiler.\r
1539 # This PCD is ignored for definition block.\r
f096950d
SZ
1540 # @Prompt Default Creator ID for ACPI table creation.\r
1541 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
1542\r
1543 ## Default Creator Revision for ACPI table creation.\r
e90a0ee8 1544 # According to ACPI specification, for tables containing Definition Blocks,\r
44d1d2a8
JY
1545 # this is the revision for the ASL Compiler.\r
1546 # This PCD is ignored for definition block.\r
f096950d
SZ
1547 # @Prompt Default Creator Revision for ACPI table creation.\r
1548 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
1549\r
901c58c5
LE
1550 ## Indicates if to set NX for stack.<BR><BR>\r
1551 # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
1552 # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
1553 # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
1554 # TRUE - to set NX for stack.<BR>\r
1555 # FALSE - Not to set NX for stack.<BR>\r
1556 # @Prompt Set NX for stack.\r
1557 gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
1558\r
48555339
FT
1559 ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.\r
1560 # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC\r
1561 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1562 # @Prompt Mmio base address of pci-based SD/MMC host controller.\r
1563 gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043\r
1564\r
11a291a4
SZ
1565 ## Indicates if ACPI S3 will be enabled.<BR><BR>\r
1566 # TRUE - ACPI S3 will be enabled.<BR>\r
1567 # FALSE - ACPI S3 will be disabled.<BR>\r
1568 # @Prompt ACPI S3 Enable.\r
1569 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000\r
1570\r
bd890a73
SZ
1571 ## Specify memory size for boot script executor stack usage in S3 phase.\r
1572 # The default size 32K. When changing the value make sure the memory size is large enough \r
1573 # to meet boot script executor requirement in the S3 phase.\r
1574 # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size\r
1575 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000\r
1576\r
08a41a25
RN
1577 ## Indicates if to use the optimized timing for best PS2 detection performance.\r
1578 # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>\r
1579 # TRUE - Use the optimized timing for best PS2 detection performance.<BR>\r
1580 # FALSE - Use the normal timing to detect PS2.<BR>\r
1581 # @Prompt Enable fast PS2 detection\r
1582 gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044\r
1583\r
097e8d68 1584[PcdsPatchableInModule]\r
fe44bae5
SZ
1585 ## Specify memory size with page number for PEI code when\r
1586 # Loading Module at Fixed Address feature is enabled.\r
1587 # The value will be set by the build tool.\r
1588 # @Prompt LMFA PEI code page number.\r
1589 # @ValidList 0x80000001 | 0\r
54ea99a7 1590 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
5fc1ae69 1591\r
fe44bae5
SZ
1592 ## Specify memory size with page number for DXE boot time code when\r
1593 # Loading Module at Fixed Address feature is enabled.\r
1594 # The value will be set by the build tool.\r
1595 # @Prompt LMFA DXE boot code page number.\r
1596 # @ValidList 0x80000001 | 0\r
54ea99a7 1597 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
5fc1ae69 1598\r
fe44bae5
SZ
1599 ## Specify memory size with page number for DXE runtime code when\r
1600 # Loading Module at Fixed Address feature is enabled.\r
1601 # The value will be set by the build tool.\r
1602 # @Prompt LMFA DXE runtime code page number.\r
1603 # @ValidList 0x80000001 | 0\r
54ea99a7 1604 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
5fc1ae69 1605\r
fe44bae5
SZ
1606 ## Specify memory size with page number for SMM code when\r
1607 # Loading Module at Fixed Address feature is enabled.\r
1608 # The value will be set by the build tool.\r
1609 # @Prompt LMFA SMM code page number.\r
1610 # @ValidList 0x80000001 | 0\r
54ea99a7 1611 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
1612\r
88d20adc 1613[PcdsDynamic, PcdsDynamicEx]\r
1614 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
1615 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1616 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1617 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ
1618 # @Prompt S3 Boot Script Table Private Data pointer.\r
1619 # @ValidList 0x80000001 | 0x0\r
88d20adc 1620 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
1621\r
3aa764ed
SZ
1622 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
1623 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1624 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1625 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ
1626 # @Prompt S3 Boot Script Table Private Smm Data pointer.\r
1627 # @ValidList 0x80000001 | 0x0\r
3aa764ed
SZ
1628 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
1629\r
5fc1ae69 1630 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1\r
b5040e4c 1631 # Virtual to Physical mapping according to the processor physical address bits.\r
fe44bae5
SZ
1632 # @Prompt Identify Mapping Page Table pointer.\r
1633 # @ValidList 0x80000001 | 0x0\r
b5040e4c 1634 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
fe44bae5
SZ
1635\r
1636[UserExtensions.TianoCore."ExtraFiles"]\r
1637 MdeModulePkgExtra.uni\r