]> git.proxmox.com Git - mirror_edk2.git/blame - MdeModulePkg/MdeModulePkg.dec
projects / mirror_edk2.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] MdeModulePkg: update poor wording in MdeModulePkg DEC/UNI file
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
e3e134eb 1## @file MdeModulePkg.dec\r
a9141950 2# This package provides the modules that conform to UEFI/PI Industry standards.\r
35c77dae 3# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
bf314e67 4# and libraries instances, which are used for those modules.\r
b7d286b6 5#\r
21d9882c 6# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>\r
64a80549 7# This program and the accompanying materials are licensed and made available under \r
8# the terms and conditions of the BSD License that accompanies this distribution. \r
4f57ff18 9# The full text of the license may be found at\r
64a80549 10# http://opensource.org/licenses/bsd-license.php. \r
11# \r
12# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
13# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
b7d286b6 14#\r
4f57ff18 15##\r
b7d286b6 16\r
17\r
b7d286b6 18[Defines]\r
19 DEC_SPECIFICATION = 0x00010005\r
84e20859 20 PACKAGE_NAME = MdeModulePkg\r
fe44bae5 21 PACKAGE_UNI_FILE = MdeModulePkg.uni\r
b7d286b6 22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
76052fab 23 PACKAGE_VERSION = 0.94\r
b7d286b6 24\r
6bfbb5f0 25[Includes]\r
ed838d0c 26 Include\r
b7d286b6 27\r
30143b15 28\r
6bfbb5f0 29[LibraryClasses]\r
4f57ff18 30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 31 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 32 IpIoLib|Include/Library/IpIoLib.h\r
73850864 33\r
4f57ff18 34 ## @libraryclass Basic function for UEFI network stack.\r
93367605 35 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 36 NetLib|Include/Library/NetLib.h\r
73850864 37\r
4f57ff18 38 ## @libraryclass The helper routines to access UDP service.\r
93367605 39 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 40 UdpIoLib|Include/Library/UdpIoLib.h\r
73850864 41\r
4bad9ada 42 ## @libraryclass The helper routines to access TCP service.\r
43 # This library is only intended to be used by UEFI network stack modules.\r
44 TcpIoLib|Include/Library/TcpIoLib.h\r
45\r
97b2c9b5
LG		 46 ## @libraryclass Defines a set of methods to reset whole system.\r
47 ResetSystemLib|Include/Library/ResetSystemLib.h\r
48\r
4f57ff18 49 ## @libraryclass Defines a set of methods related do S3 mode.\r
05d71050 50 # This library class is no longer used and modules using this library should\r
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
4fb31c2c 52 S3Lib|Include/Library/S3Lib.h\r
73850864 53\r
4f57ff18 54 ## @libraryclass Defines a set of methods related recovery mode.\r
05d71050 55 # This library class is no longer used and modules using this library should\r
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
4fb31c2c 57 RecoveryLib|Include/Library/RecoveryLib.h\r
73850864 58\r
804dbc37 59 ## @libraryclass Provides HII related functions.\r
60 HiiLib|Include/Library/HiiLib.h\r
73850864 61\r
4f57ff18 62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 63 CapsuleLib|Include/Library/CapsuleLib.h\r
73850864 64\r
4f57ff18 65 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG		 66 DpcLib|Include/Library/DpcLib.h\r
67\r
73850864 68 ## @libraryclass Provides global variables that are pointers\r
a90ccab8
LG		 69 # to the UEFI HII related protocols.\r
70 #\r
da801a6e 71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 72\r
cd98f305
LG		 73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
74 #\r
975e8815 75 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
cd98f305 76\r
75dea6bd 77 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
78 #\r
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
80\r
fe92ab29 81 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
82 #\r
83 DebugAgentLib|Include/Library/DebugAgentLib.h\r
6eea8eae 84\r
467d15ae 85 ## @libraryclass Provide platform specific hooks.\r
86 #\r
87 PlatformHookLib|Include/Library/PlatformHookLib.h\r
495797c5 88\r
89 ## @libraryclass Provide platform specific hooks for SMM core.\r
90 #\r
91 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
32e85209
JY		 92\r
93 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
94 #\r
95 LockBoxLib|Include/Library/LockBoxLib.h\r
467d15ae 96 \r
1e172d6b 97 ## @libraryclass Provide the CPU exception handler.\r
98 #\r
99 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
100 \r
7c6c064c
ED		 101 ## @libraryclass Provides platform specific display interface.\r
102 #\r
103 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
104\r
6bfbb5f0 105[Guids]\r
f02d0c0f 106 ## MdeModule package token space guid\r
a90ccab8 107 # Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 108 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 109\r
f02d0c0f 110 ## Hob guid for Pcd DataBase\r
a90ccab8 111 # Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 112 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
73850864 113\r
419db80b
BF		 114 ## Guid for PCD DataBase signature.\r
115 # Include/Guid/PcdDataBaseSignatureGuid.h\r
116 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
117\r
5c526736 118 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 119 # Include/Guid/MdeModuleHii.h\r
5c526736 120 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
73850864 121\r
5c526736 122 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 123 # Include/Guid/MdeModuleHii.h\r
5c526736 124 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
73850864 125\r
f02d0c0f 126 ## Guid to specify the System Non Volatile FV\r
a90ccab8 127 # Include/Guid/SystemNvDataGuid.h\r
351986ae 128 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
73850864 129\r
3e02ebb2
SZ		 130 ## GUID used as the signature of FTW working block header.\r
131 # Include/Guid/SystemNvDataGuid.h\r
132 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
133\r
134 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
135 # Include/Guid/FaultTolerantWrite.h\r
136 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
137\r
f02d0c0f 138 ## Guid specify the device is the console out device.\r
a90ccab8 139 # Include/Guid/ConsoleOutDevice.h\r
351986ae 140 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG		 141\r
142 ## Guid specify the device is the console in device.\r
a90ccab8 143 # Include/Guid/ConsoleInDevice.h\r
351986ae 144 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 145\r
f02d0c0f 146 ## Hob and Variable guid specify the platform memory type information.\r
a90ccab8 147 # Include/Guid/MemoryTypeInformation.h\r
351986ae 148 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
73850864 149\r
f02d0c0f 150 ## Capsule update hob and variable guid\r
a90ccab8 151 # Include/Guid/CapsuleVendor.h\r
351986ae 152 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
73850864 153\r
f02d0c0f 154 ## Guid specifiy the device is the StdErr device.\r
a90ccab8 155 # Include/Guid/StandardErrorDevice.h\r
88f20127 156 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 157\r
3709c4cd 158 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
a90ccab8 159 # Include/Guid/VariableFormat.h\r
3709c4cd 160 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
73850864 161\r
9725730b 162 # Include/Guid/VariableIndexTable.h\r
163 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
164\r
d00ed85e 165 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
166 # Include/Guid/SmmVariableCommon.h\r
167 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
168 \r
2db4a77e 169 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
a90ccab8 170 # Include/Guid/Performance.h\r
f0da4d7d
SZ		 171 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
172 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
173 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
174 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
1df7a023 175\r
76f1dde2 176 ## Guid is defined for CRC32 encapsulation scheme.\r
a90ccab8 177 # Include/Guid/Crc32GuidedSectionExtraction.h\r
76f1dde2
LG		 178 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
179\r
63886849 180 ## Include/Guid/NicIp4ConfigNvData.h\r
181 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
25126a05 182\r
183 ## Include/Guid/StatusCodeCallbackGuid.h\r
184 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
63886849 185\r
10c5d87e 186 ## GUID identifies status code records HOB that originate from the PEI status code\r
187 # Include/Guid/MemoryStatusCodeRecord.h\r
188 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
189\r
190 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
191 # Include/Guid/StatusCodeDataTypeDebug.h\r
192 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
193\r
54ea99a7 194 ## A configuration Table Guid for Load module at fixed address \r
195 # Include/Guid/LoadModuleAtFixedAddress.h\r
196 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
197\r
62a5bf63 198 ## GUID used to store the global debug mask value into an EFI Variable\r
199 # Include/Guid/DebugMask.h \r
200 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
201 \r
54cd17e9 202 ## Event for the DXE Core to signal idle events\r
203 # Include/Guid/EventIdle.h\r
204 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
205\r
30c00a1c 206 ## Include/Guid/RecoveryDevice.h\r
207 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
208\r
209 ## Include/Guid/RecoveryDevice.h\r
210 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
211\r
212 ## Include/Guid/RecoveryDevice.h\r
213 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
214\r
215 ## Include/Guid/RecoveryDevice.h\r
216 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
217\r
1c837cd5 218 ## Include/Guid/SmmLockBox.h\r
044824d9 219 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
1c837cd5 220\r
1261fe23 221 ## Include/Guid/AcpiS3Context.h\r
222 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
223\r
224 ## Include/Guid/AcpiS3Context.h\r
225 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
226\r
be46cd5f 227 ## Include/Guid/BootScriptExecutorVariable.h\r
228 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
229 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
230\r
c8ad2d7a
LG		 231 ## Include/Guid/UsbKeyBoardLayout.h\r
232 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
233 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
234 \r
235 ## Include/Guid/HiiResourceSampleHii.h\r
236 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
237\r
238 ## Include/Guid/DriverSampleHii.h\r
239 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
240 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
c8ad2d7a
LG		 241 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
242\r
243 ## Include/Guid/PlatDriOverrideHii.h\r
244 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
245\r
246 ## Include/Guid/Ip4ConfigHii.h\r
247 gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
248\r
249 ## Include/Guid/VlanConfigHii.h\r
250 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
251\r
252 ## Include/Guid/Ip4IScsiConfigHii.h\r
253 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
254 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
255\r
256 ## Include/Guid/ZeroGuid.h\r
257 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
258 \r
259 ## Include/Guid/MtcVendor.h\r
260 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
261\r
0284e90c
LG		 262 ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
263 # Include/Guid/FirmwarePerformance.h\r
044824d9 264 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
db91c620 265 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
044824d9 266\r
267 ## Include/Guid/ExitBootServiceFailed.h\r
268 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
0284e90c 269\r
f58f3de0 270 ## Include/Guid/ConnectConInEvent.h\r
271 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
272\r
69fc8f08
RN		 273 ## Include/Guid/StatusCodeDataTypeVariable.h\r
274 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
84edd20b
SZ		 275 \r
276 ## Include/Guid/MemoryProfile.h\r
277 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
69fc8f08 278\r
4b1bf81c 279[Ppis]\r
ea060cfa 280 ## Include/Ppi/AtaController.h\r
281 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
282\r
4b1bf81c 283 ## Include/Ppi/UsbHostController.h\r
284 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
285\r
286 ## Include/Ppi/Usb2HostController.h\r
287 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
288\r
289 ## Include/Ppi/UsbController.h\r
290 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
291\r
292 ## Include/Ppi/UsbIo.h\r
293 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
294\r
da58b0db 295 ## Include/Ppi/Capsule.h\r
296 gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
297\r
ce2f13a3 298 ## Include/Ppi/SecPerformance.h\r
299 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
300\r
9fba8e7d 301 ## Include/Ppi/SmmCommunication.h\r
302 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
303\r
e7b7db36 304 ## Include/Ppi/SmmAccess.h\r
305 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
306\r
3e4df77f 307 ## Include/Ppi/SmmControl.h\r
308 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
309\r
78df32f2 310 ## Include/Ppi/PostBootScriptTable.h\r
311 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
312\r
883e23d0
LG		 313 ## Include/Ppi/SerialPortPei.h\r
314 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
315\r
6bfbb5f0 316[Protocols]\r
023c0fec 317 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
a90ccab8
LG		 318 # Include/Protocol/LoadPe32Image.h\r
319 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
320 # If developer need implement such functionality, they should use BasePeCoffLib.\r
023c0fec 321 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
73850864 322\r
504dcb0a 323 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
a90ccab8 324 # Include/Protocol/Print2.h\r
504dcb0a 325 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
2dd4c603 326\r
346cf9ac 327 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
a90ccab8 328 # Include/Protocol/GenericMemoryTest.h\r
351986ae 329 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
73850864 330\r
55e4e173 331 ## Include/Protocol/Dpc.h\r
36ee91ca 332 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
73850864 333\r
85e923a5
LG		 334 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
335 # Include/Protocol/FaultTolerantWrite.h\r
336 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
73850864 337\r
8a2d4996 338 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
339 # Include/Protocol/SmmFaultTolerantWrite.h\r
340 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
341 \r
85e923a5
LG		 342 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
343 # Include/Protocol/SwapAddressRange.h\r
344 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
8a2d4996 345 \r
346 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
347 # Include/Protocol/SmmSwapAddressRange.h\r
348 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
349 \r
350 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
351 # Include/Protocol/SmmVariableProtocol.h\r
352 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
353\r
ff843847
RN		 354 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
355 # Include/Protocol/VariableLock.h\r
356 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
357\r
8a2d4996 358 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
359 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
360 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
73850864 361\r
62a5bf63 362 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
363 # Include/Guid/DebugMask.h \r
364 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
1c837cd5 365\r
366 ## Include/Protocol/LockBox.h\r
367 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
0a48ffb0
LG		 368 \r
369 ## Include/Protocol/FormBrowserEx.h\r
48a9d5f7
LG		 370 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
371\r
c8ad2d7a
LG		 372 ## Include/Protocol/EbcVmTest.h\r
373 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
374\r
375 ## Include/Protocol/EbcSimpleDebugger.h\r
376 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
e2988e66 377\r
378 ## Include/Protocol/BootLogo.h\r
379 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
380\r
7c6c064c
ED		 381 ## Include/Protocol/DisplayProtocol.h\r
382 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
383\r
384 ## Include/Protocol/FormBrowserEx2.h\r
385 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
386\r
fe44bae5
SZ		 387#\r
388# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
389# 0x80000001 | Invalid value provided.\r
390# 0x80000002 | Reserved bits must be set to zero.\r
391# 0x80000003 | Incorrect progress code provided.\r
392# 0x80000004 | Invalid foreground color specified.\r
393# 0x80000005 | Invalid background color specified.\r
394# 0x80000006 | Incorrect error code provided.\r
395#\r
396\r
a86ae184 397[PcdsFeatureFlag]\r
fe44bae5
SZ		 398 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r
399 # TRUE - Supports update capsule across a system reset.<BR>\r
400 # FALSE - Does not support update capsule across a system reset.<BR>\r
401 # @Prompt Enable update capsule across a system reset.\r
109e9a61 402 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
73850864 403\r
fe44bae5
SZ		 404 ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r
405 # TRUE - All PCD PPI services will be produced.<BR>\r
406 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r
407 # @Prompt Enable full PEI PCD services.\r
f806dd27
LG		 408 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
409\r
fe44bae5
SZ		 410 ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r
411 # It can be disabled to save size.<BR><BR>\r
412 # TRUE - Device Path To Text Protocol will be produced.<BR>\r
413 # FALSE - Device Path To Text Protocol will not be produced.<BR>\r
414 # @Prompt Enable Device Path to Text support.\r
348c8131 415 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
73850864 416\r
fe44bae5
SZ		 417 ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r
418 # It can be disabled to save size.<BR><BR>\r
419 # TRUE - Device Path From Text Protocol will be produced.<BR>\r
420 # FALSE - Device Path From Text Protocol will not be produced.<BR>\r
421 # @Prompt Enable Device Path From Text support.\r
348c8131 422 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
73850864 423\r
fe44bae5 424 ## Indicates if the statistics about variable usage will be collected. This information is\r
fc9da5a6 425 # stored as a vendor configuration table into the EFI system table.\r
fe44bae5
SZ		 426 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
427 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r
428 # TRUE - Statistics about variable usage will be collected.<BR>\r
429 # FALSE - Statistics about variable usage will not be collected.<BR>\r
430 # @Prompt Enable variable statistics collection.\r
33a5a666 431 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
73850864 432\r
fe44bae5
SZ		 433 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r
434 # TRUE - Installs Unicode Collation Protocol.<BR>\r
435 # FALSE - Does not install Unicode Collation Protocol.<BR>\r
436 # @Prompt Enable Unicode Collation support.\r
ac12a167 437 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
73850864 438\r
fe44bae5
SZ		 439 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r
440 # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r
441 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r
442 # @Prompt Enable Unicode Collation 2 support.\r
ac12a167 443 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
73850864 444\r
fe44bae5
SZ		 445 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
446 # It could be set FALSE to save size.<BR><BR>\r
447 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
448 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
449 # @Prompt Enable ConOut GOP support.\r
d0c64728 450 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
73850864 451\r
fe44bae5
SZ		 452 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
453 # It could be set FALSE to save size.<BR><BR>\r
454 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
455 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
456 # @Prompt Enable ConOut UGA support.\r
d0c64728 457 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
73850864 458\r
fe44bae5
SZ		 459 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r
460 # This PCD is used to tune PEI phase performance to reduce the search image time.\r
461 # It can be set according to the generated image section type.<BR><BR>\r
462 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r
463 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r
464 # @Prompt PeiCore search TE section first.\r
3076397e 465 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
73850864 466\r
fe44bae5
SZ		 467 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
468 # interrupt to access usb device in the case of absence of usb stack.\r
469 # DUET platform requires the token to be TRUE.<BR><BR>\r
470 # TRUE - Turn off usb legacy support.<BR>\r
471 # FALSE - Does not turn off usb legacy support.<BR>\r
35c77dae 472 # @Prompt Turn off USB legacy support.\r
cc582cff 473 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
8a2d4996 474 \r
fe44bae5
SZ		 475 ## Indicates if HiiImageProtocol will be installed.\r
476 # FALSE is for size reduction.<BR><BR>\r
477 # TRUE - Installs HiiImageProtocol.<BR>\r
478 # FALSE - Does not install HiiImageProtocol.<BR>\r
479 # @Prompt Enable HII image support.\r
813acf3a 480 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
73850864 481\r
fe44bae5 482 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r
a8e1ed54 483 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
fe44bae5
SZ		 484 # from HII database.<BR><BR>\r
485 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r
486 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r
487 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
813acf3a 488 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 489\r
fe44bae5
SZ		 490 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
491 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
492 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
493 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
494 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
495 # @Prompt Enable framework backward compatibility support.\r
f806dd27 496 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
73850864 497\r
fe44bae5
SZ		 498 ## Indicates if HelloWorld Application will print the verbose information.\r
499 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
500 # TRUE - HelloWorld Application will print the verbose information.<BR>\r
501 # FALSE - HelloWorld Application will not print the verbose information.<BR>\r
502 # @Prompt Enable HelloWorld print.\r
223c22d8 503 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 504\r
fe44bae5
SZ		 505 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r
506 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r
507 # FALSE - Only FTW Write service is available.<BR>\r
508 # @Prompt Enable FULL FTW services.\r
72670d3e 509 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
510\r
fe44bae5
SZ		 511 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r
512 # TRUE - DXE IPL will support UEFI decompression.<BR>\r
513 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r
514 # @Prompt Enable UEFI decompression support in DXE IPL.\r
72670d3e 515 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 516\r
fe44bae5
SZ		 517 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r
518 # TRUE - PciBus driver supports the hot plug device.<BR>\r
519 # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r
520 # @Prompt Enable PciBus hot plug device support.\r
9060e3ec 521 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
522\r
fe44bae5
SZ		 523 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r
524 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
525 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
526 # @Prompt Enable PCI bridge IO alignment probe.\r
b3ec9b56 527 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
fe44bae5
SZ		 528\r
529 ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r
530 # TRUE - Reports StatusCode via Serial port.<BR>\r
531 # FALSE - Does not report StatusCode via Serial port.<BR>\r
532 # @Prompt Enable StatusCode via Serial port.\r
10c5d87e 533 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
534\r
fe44bae5
SZ		 535 ## Indicates if StatusCode is stored in memory.\r
536 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r
537 # TRUE - Stores StatusCode in memory.<BR>\r
538 # FALSE - Does not store StatusCode in memory.<BR>\r
539 # @Prompt Enable StatusCode via memory.\r
10c5d87e 540 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
541\r
fe44bae5
SZ		 542 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r
543 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r
544 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r
545 # @Prompt Enable PEI StatusCode replay in DXE phase\r
10c5d87e 546 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
9060e3ec 547\r
fe44bae5
SZ		 548 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r
549 # TRUE - Installs ACPI SDT protocol.<BR>\r
550 # FALSE - Does not install ACPI SDT protocol.<BR>\r
551 # @Prompt Enable ACPI SDT support.\r
3dc8585e
JY		 552 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
553\r
fe44bae5
SZ		 554 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
555 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r
556 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
557 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
558 # @Prompt Enable unaligned PCI I/O support.\r
aeeb84ba 559 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
11232773 560\r
fe44bae5
SZ		 561 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r
562 # TRUE - TEXT statement will always be set to GrayOut.<BR>\r
563 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r
564 # @Prompt Always GrayOut TEXT statement.\r
11232773 565 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
fe44bae5
SZ		 566\r
567 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r
568 # TRUE - The unselectable menu will be set to GrayOut.<BR>\r
569 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r
570 # @Prompt GrayOut read only menu.\r
0777cea6
ED		 571 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
572\r
fe44bae5
SZ		 573 ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r
574 # TRUE - Supports recovery from IDE disk.<BR>\r
575 # FALSE - Does not support recovery from IDE disk.<BR>\r
576 # @Prompt Enable recovery on IDE disk.\r
74ef1d42 577 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
578\r
fe44bae5
SZ		 579 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r
580 # TRUE - Supports recovery from FAT floppy disk.<BR>\r
581 # FALSE - Does not support recovery from FAT floppy disk.<BR>\r
582 # @Prompt Enable recovery on FAT floppy disk.\r
74ef1d42 583 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
584\r
fe44bae5
SZ		 585 ## Indicates if recovery from data CD will be supported.<BR><BR>\r
586 # TRUE - Supports recovery from data CD.<BR>\r
587 # FALSE - Does not support recovery from data CD.<BR>\r
588 # @Prompt Enable recovery on data CD.\r
74ef1d42 589 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
590\r
fe44bae5
SZ		 591 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r
592 # TRUE - Supports recovery from USB disk.<BR>\r
593 # FALSE - Does not support recovery from USB disk.<BR>\r
594 # @Prompt Enable recovery on FAT USB disk.\r
74ef1d42 595 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
596\r
fe44bae5
SZ		 597 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r
598 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r
599 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r
600 # @Prompt Enable S3 performance data support.\r
0284e90c
LG		 601 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
602\r
5d2311be 603[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
fe44bae5
SZ		 604 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
605 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
606 # is built in firmware.<BR><BR>\r
607 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r
608 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r
609 # @Prompt DxeIpl switch to long mode.\r
4e17cc90 610 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
611\r
fe44bae5
SZ		 612 ## Indicates if DxeIpl should rebuild page tables. This flag only\r
613 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r
614 # TRUE - DxeIpl will rebuild page tables.<BR>\r
615 # FALSE - DxeIpl will not rebuild page tables.<BR>\r
616 # @Prompt DxeIpl rebuild page tables.\r
e47f0da4 617 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
618\r
a86ae184 619[PcdsFixedAtBuild]\r
fe44bae5
SZ		 620 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r
621 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r
622 # 0: Disable the feature.<BR>\r
623 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r
624 # @Prompt Enable LMFA feature.\r
625 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r
54ea99a7 626 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
d13e7bda 627\r
fe44bae5
SZ		 628 ## Progress Code for OS Loader LoadImage start.<BR><BR>\r
629 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r
630 # @Prompt Progress Code for OS Loader LoadImage start.\r
631 # @ValidList 0x80000003 | 0x03058000\r
eab90a61 632 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
633\r
fe44bae5
SZ		 634 ## Progress Code for OS Loader StartImage start.<BR><BR>\r
635 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r
636 # @Prompt Progress Code for OS Loader StartImage start.\r
637 # @ValidList 0x80000003 | 0x03058001\r
eab90a61 638 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
639\r
fe44bae5
SZ		 640 ## Progress Code for S3 Suspend start.<BR><BR>\r
641 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r
642 # @Prompt Progress Code for S3 Suspend start.\r
643 # @ValidList 0x80000003 | 0x03078000\r
eab90a61 644 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
645\r
fe44bae5
SZ		 646 ## Progress Code for S3 Suspend end.<BR><BR>\r
647 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r
648 # @Prompt Progress Code for S3 Suspend end.\r
649 # @ValidList 0x80000003 | 0x03078001\r
eab90a61 650 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
651\r
fe44bae5
SZ		 652 ## Error Code for SetVariable failure.<BR><BR>\r
653 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r
654 # @Prompt Error Code for SetVariable failure.\r
655 # @ValidList 0x80000006 | 0x03058002\r
69fc8f08
RN		 656 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
657\r
fe44bae5
SZ		 658[PcdsFixedAtBuild, PcdsPatchableInModule]\r
659 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
660 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
661 # for a dynamic PCD used in PEI phase.\r
662 # @Prompt Max PEI PCD callback number per PCD entry.\r
663 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
664\r
35c77dae 665 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r
adcd7381 666 # to store PCD value.\r
fe44bae5 667 # @Prompt VPD base address.\r
adcd7381
SZ		 668 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
669\r
fe781940
SZ		 670 ## Maximum number of FV is supported by PeiCore's dispatching.\r
671 # @Prompt Maximum number of FV supported by PeiCore.\r
672 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
673\r
674 ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
675 # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
676 # @Prompt Maximum File count per FV supported by PeiCore.\r
677 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
678\r
fe44bae5
SZ		 679 ## Maximum stack size for PeiCore.\r
680 # @Prompt Maximum stack size for PeiCore.\r
681 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
682\r
fe781940
SZ		 683 ## Maximum PPI count is supported by PeiCore's PPI database.\r
684 # @Prompt Maximum PPI count supported by PeiCore.\r
685 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
686\r
fe44bae5
SZ		 687 ## The maximum size of a single non-HwErr type variable.\r
688 # @Prompt Maximum variable size.\r
689 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
690\r
691 ## The maximum size of single hardware error record variable.<BR><BR>\r
692 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
693 # In IA64 platforms, this value should be larger than 128KB.<BR>\r
694 # @Prompt Maximum HwErr variable size.\r
695 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
696\r
697 ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize.\r
698 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
699 # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
700 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
701 # @Prompt HwErr variable storage size.\r
702 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
703\r
704 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r
705 # @Prompt Variable storage size.\r
706 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
707\r
708 ## FFS filename to find the ACPI tables.\r
709 # @Prompt FFS name of ACPI tables storage.\r
710 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
711\r
712 ## FFS filename to find the capsule coalesce image.\r
713 # @Prompt FFS name of capsule coalesce image.\r
714 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
715\r
35c77dae
LG		 716 ## Maximum number of performance log entries during PEI phase.\r
717 # @Prompt Maximum number of PEI performance log entries.\r
348c8131 718 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 719\r
fe44bae5
SZ		 720 ## RTC Update Timeout Value(microsecond).\r
721 # @Prompt RTC Update Timeout Value.\r
4e17cc90 722 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
73850864 723\r
fe44bae5
SZ		 724 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r
725 # TRUE - 16550 serial port registers are in MMIO space.<BR>\r
726 # FALSE - 16550 serial port registers are in I/O space.<BR>\r
727 # @Prompt Serial port registers use MMIO.\r
467d15ae 728 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
fe44bae5
SZ		 729\r
730 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
731 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
732 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
733 # @Prompt Enable serial port hardware flow control.\r
467d15ae 734 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
735\r
fe44bae5
SZ		 736 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r
737 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r
738 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r
739 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
740 # @Prompt Enable serial port cable detetion.\r
784ce127 741 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
742 \r
fe44bae5
SZ		 743 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
744 # @Prompt Base address of serial port registers.\r
467d15ae 745 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
746\r
747 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
fe44bae5
SZ		 748 # @Prompt Baud rate for serial port.\r
749 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r
467d15ae 750 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
751\r
fe44bae5
SZ		 752 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r
753 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r
754 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r
755 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r
756 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 757 #\r
fe44bae5
SZ		 758 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r
759 # @Prompt Serial port Line Control settings.\r
760 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r
467d15ae 761 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
762\r
fe44bae5
SZ		 763 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r
764 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r
765 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r
766 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r
767 # BIT4..BIT3 - Reserved. Must be 0.<BR>\r
768 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r
769 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 770 #\r
fe44bae5
SZ		 771 # Default is to enable and clear all FIFOs.<BR>\r
772 # @Prompt Serial port FIFO Control settings.\r
773 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
467d15ae 774 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
775\r
3ddcceea 776 ## This setting can override the default TFTP block size. A value of 0 computes\r
777 # the default from MTU information. A non-zero value will be used as block size\r
778 # in bytes.\r
fe44bae5
SZ		 779 # @Prompt TFTP block size.\r
780 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
781\r
6eea8eae 782 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
fe44bae5 783 # structure. The default value for this PCD is 0, which means that the DXE Core\r
6eea8eae
LG		 784 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
785 # boundary as close to the top of memory as feasible. If this PCD is set to a \r
fe44bae5 786 # value other than 0, then the DXE Core will first attempt to allocate the\r
6eea8eae
LG		 787 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
788 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
789 # boundary as close to the top of memory as feasible.\r
fe44bae5 790 # @Prompt Maximum Efi System Table Pointer address.\r
6eea8eae 791 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
838a9c58 792\r
fe44bae5
SZ		 793 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
794 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
795 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
796 # @Prompt Shadow Peim On S3 Boot. \r
5d7f3126
LG		 797 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
798\r
e84f07b5 799 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
fe44bae5 800 # @Prompt Default OEM ID for ACPI table creation.\r
e84f07b5
SZ		 801 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
802\r
803 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
fe44bae5 804 # @Prompt Default OEM Table ID for ACPI table creation.\r
e84f07b5
SZ		 805 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
806\r
807 ## Default OEM Revision for ACPI table creation.\r
fe44bae5 808 # @Prompt Default OEM Revision for ACPI table creation.\r
e84f07b5
SZ		 809 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
810\r
811 ## Default Creator ID for ACPI table creation.\r
fe44bae5 812 # @Prompt Default Creator ID for ACPI table creation.\r
e84f07b5
SZ		 813 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
814\r
815 ## Default Creator Revision for ACPI table creation.\r
fe44bae5 816 # @Prompt Default Creator Revision for ACPI table creation.\r
e84f07b5
SZ		 817 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
818\r
84edd20b
SZ		 819 ## The mask is used to control memory profile behavior.<BR><BR>\r
820 # BIT0 - Enable UEFI memory profile.<BR>\r
821 # BIT1 - Enable SMRAM profile.<BR>\r
822 # @Prompt Memory Profile Property.\r
823 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
824 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
825\r
826 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
827 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
828 #\r
829 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
830 # EfiReservedMemoryType 0x0001<BR>\r
831 # EfiLoaderCode 0x0002<BR>\r
832 # EfiLoaderData 0x0004<BR>\r
833 # EfiBootServicesCode 0x0008<BR>\r
834 # EfiBootServicesData 0x0010<BR>\r
835 # EfiRuntimeServicesCode 0x0020<BR>\r
836 # EfiRuntimeServicesData 0x0040<BR>\r
837 # EfiConventionalMemory 0x0080<BR>\r
838 # EfiUnusableMemory 0x0100<BR>\r
839 # EfiACPIReclaimMemory 0x0200<BR>\r
840 # EfiACPIMemoryNVS 0x0400<BR>\r
841 # EfiMemoryMappedIO 0x0800<BR>\r
842 # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
843 # EfiPalCode 0x2000<BR>\r
844 # OS Reserved 0x8000000000000000<BR>\r
845 #\r
846 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
847 #\r
848 # @Prompt Memory profile memory type.\r
849 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
850\r
31122d8c 851 ## UART clock frequency is for the baud rate configuration.\r
35c77dae 852 # @Prompt Serial Port Clock Rate.\r
31122d8c
LG		 853 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
854 \r
855 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
856 # information that describes the path that contains zero or more PCI to PCI briges \r
857 # followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
858 # first byte is the PCI Device Number, then second byte is the PCI Function Number, \r
859 # and the last two bytes are the offset to the PCI power management capabilities \r
860 # register used to manage the D0-D3 states. If a PCI power management capabilities \r
861 # register is not present, then the last two bytes in the offset is set to 0. The \r
862 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a \r
863 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
864 # @Prompt Pci Serial Device Info\r
865 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
866\r
867 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
35c77dae 868 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
31122d8c
LG		 869 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
870 \r
be046357 871[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
fe44bae5
SZ		 872 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
873 # This PCD could be set to 0 then console output would be at max column and max row.\r
874 # @Prompt Console output row.\r
4bfa7dc4 875 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
73850864 876\r
fe44bae5
SZ		 877 ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.\r
878 # This PCD could be set to 0 then console output would be at max column and max row.\r
879 # @Prompt Console output column.\r
4e17cc90 880 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
73850864 881\r
b9b5e307 882 ## This PCD defines the video horizontal resolution.\r
fe44bae5
SZ		 883 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
884 # @Prompt Video horizontal resolution.\r
b9b5e307 885 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
886\r
887 ## This PCD defines the video vertical resolution.\r
fe44bae5
SZ		 888 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
889 # @Prompt Video vertical resolution.\r
b9b5e307 890 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
891\r
fe44bae5
SZ		 892[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
893 ## Base address of the NV variable range in flash device.\r
894 # @Prompt Base address of flash NV variable range.\r
a86ae184 895 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
73850864 896\r
fe44bae5
SZ		 897 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r
898 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
899 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
900 # be reflushed through the manner of fault tolerant write.\r
901 # @Prompt Size of flash NV variable range.\r
902 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
903\r
2c4b18e0 904 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 905 # @Prompt Base address of flash FTW spare block range.\r
73850864 906 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
907\r
fe44bae5
SZ		 908 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
909 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
910 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
911 # be reflushed through the manner of fault tolerant write.\r
912 # @Prompt Size of flash FTW spare block range.\r
913 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
914\r
a86ae184 915 ## Base address of the FTW working block range in flash device.\r
0d3edd9d 916 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 917 # @Prompt Base address of flash FTW working block range.\r
73850864 918 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
919\r
fe44bae5 920 ## Size of the FTW working block range.\r
0d3edd9d
SZ		 921 # If the value is less than one block size, the work space range should not span blocks.\r
922 # If the value is larger than one block size, it should be block size aligned.\r
fe44bae5
SZ		 923 # @Prompt Size of flash FTW working block range.\r
924 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
925\r
926 ## 64-bit Base address of the NV variable range in flash device.\r
927 # @Prompt 64-bit Base address of flash NV variable range.\r
92a4f6f3 928 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
929\r
2c4b18e0 930 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 931 # @Prompt 64-bit Base address of flash FTW spare block range.\r
92a4f6f3 932 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
933\r
934 ## 64-bit Base address of the FTW working block range in flash device.\r
0d3edd9d 935 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 936 # @Prompt 64-bit Base address of flash FTW working block range.\r
92a4f6f3 937 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
938\r
fe44bae5
SZ		 939 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
940 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
941 # @Prompt Reserved memory range for EMU variable NV storage.\r
02328a57 942 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
943\r
a90ccab8 944 ## This PCD defines the times to print hello world string.\r
fe44bae5
SZ		 945 # This PCD is a sample to explain UINT32 PCD usage.\r
946 # @Prompt HellowWorld print times.\r
4e17cc90 947 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 948\r
fe44bae5
SZ		 949 ## This PCD defines the HelloWorld print string.\r
950 # This PCD is a sample to explain String typed PCD usage.\r
951 # @Prompt HelloWorld print string.\r
952 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
953\r
954 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r
73850864 955 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
fe44bae5 956 # @Prompt Max size of populated capsule.\r
4e17cc90 957 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
73850864 958\r
fe44bae5 959 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r
0ef42f88 960 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
fe44bae5 961 # @Prompt Max size of non-populated capsule.\r
4e17cc90 962 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 963\r
fe44bae5
SZ		 964 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r
965 # @Prompt Firmware vendor.\r
e026f005 966 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
73850864 967\r
fe44bae5
SZ		 968 ## Firmware revision that is the default revision filled into the EFI System Table.\r
969 # @Prompt Firmware revision.\r
6144e7af 970 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
971\r
fe44bae5
SZ		 972 ## Null-terminated Unicode string that describes the firmware version.\r
973 # @Prompt Firmware version string.\r
73850864 974 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
975\r
fe44bae5
SZ		 976 ## Null-terminated Unicode string that contains the date the firmware was released\r
977 # @Prompt Firmware release data string.\r
6144e7af 978 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
979\r
fe44bae5
SZ		 980 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r
981 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r
982 # The default value in PeiPhase is 1 KBytes.<BR>\r
983 # The default value in DxePhase is 128 KBytes.<BR>\r
984 # @Prompt StatusCode memory size.\r
10c5d87e 985 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
986\r
fe44bae5
SZ		 987 ## Indicates if to reset system when memory type information changes.<BR><BR>\r
988 # TRUE - Resets system when memory type information changes.<BR>\r
989 # FALSE - Does not reset system when memory type information changes.<BR>\r
990 # @Prompt Reset on memory type information change.\r
dad63934
RN		 991 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
992\r
f0a1bf11 993 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
fe44bae5
SZ		 994 # Only following values defined in UEFI specification are valid:<BR><BR>\r
995 # 0x00 (EFI_BLACK)<BR>\r
996 # 0x01 (EFI_BLUE)<BR>\r
997 # 0x02 (EFI_GREEN)<BR>\r
998 # 0x03 (EFI_CYAN)<BR>\r
999 # 0x04 (EFI_RED)<BR>\r
1000 # 0x05 (EFI_MAGENTA)<BR>\r
1001 # 0x06 (EFI_BROWN)<BR>\r
1002 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1003 # 0x08 (EFI_DARKGRAY)<BR>\r
1004 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1005 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1006 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1007 # 0x0C (EFI_LIGHTRED)<BR>\r
1008 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1009 # 0x0E (EFI_YELLOW)<BR>\r
1010 # 0x0F (EFI_WHITE)<BR>\r
1011 # @Prompt Foreground color for browser subtile.\r
1012 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11
LG		 1013 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
1014 \r
1015 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
fe44bae5
SZ		 1016 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1017 # 0x00 (EFI_BLACK)<BR>\r
1018 # 0x01 (EFI_BLUE)<BR>\r
1019 # 0x02 (EFI_GREEN)<BR>\r
1020 # 0x03 (EFI_CYAN)<BR>\r
1021 # 0x04 (EFI_RED)<BR>\r
1022 # 0x05 (EFI_MAGENTA)<BR>\r
1023 # 0x06 (EFI_BROWN)<BR>\r
1024 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1025 # 0x08 (EFI_DARKGRAY)<BR>\r
1026 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1027 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1028 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1029 # 0x0C (EFI_LIGHTRED)<BR>\r
1030 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1031 # 0x0E (EFI_YELLOW)<BR>\r
1032 # 0x0F (EFI_WHITE)<BR>\r
1033 # @Prompt Foreground color for browser field.\r
1034 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11
LG		 1035 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
1036 \r
1037 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ		 1038 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
1039 # 0x00 (EFI_BLACK)<BR>\r
1040 # 0x01 (EFI_BLUE)<BR>\r
1041 # 0x02 (EFI_GREEN)<BR>\r
1042 # 0x03 (EFI_CYAN)<BR>\r
1043 # 0x04 (EFI_RED)<BR>\r
1044 # 0x05 (EFI_MAGENTA)<BR>\r
1045 # 0x06 (EFI_BROWN)<BR>\r
1046 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1047 # 0x08 (EFI_DARKGRAY)<BR>\r
1048 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1049 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1050 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1051 # 0x0C (EFI_LIGHTRED)<BR>\r
1052 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1053 # 0x0E (EFI_YELLOW)<BR>\r
1054 # 0x0F (EFI_WHITE)<BR>\r
1055 # @Prompt Foreground color for highlighted browser field.\r
1056 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11
LG		 1057 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
1058 \r
1059 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ		 1060 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
1061 # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
1062 # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r
1063 # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r
1064 # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r
1065 # 0x40 (EFI_BACKGROUND_RED)<BR>\r
1066 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r
1067 # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r
1068 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r
1069 # @Prompt Background color for highlighted browser field.\r
1070 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r
f0a1bf11
LG		 1071 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
1072\r
ea060cfa 1073 ## Time in second to delay for SATA devices to spin-up for recovery.\r
fe44bae5 1074 # @Prompt SATA spin-up delay time in second for recovery path.\r
ea060cfa 1075 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
1076\r
fe44bae5 1077 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
88d20adc 1078 # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
1079 # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
1080 # script node created in runtime phase.\r
fe44bae5 1081 # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
88d20adc 1082 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
1083\r
ab7017fe 1084 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
fe44bae5
SZ		 1085 # The default size is 32K. When changing the value of this PCD, the platform developer should\r
1086 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r
1087 # @Prompt Stack size for CapsulePei transfer to long mode.\r
6bea3336 1088 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
ab7017fe 1089\r
fe44bae5
SZ		 1090 ## Indicates if 1G page table will be enabled.<BR><BR>\r
1091 # TRUE - 1G page table will be enabled.<BR>\r
1092 # FALSE - 1G page table will not be enabled.<BR>\r
1093 # @Prompt Enable 1G page table support.\r
3ecd0155
JY		 1094 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
1095\r
fe44bae5
SZ		 1096 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r
1097 # TRUE - Single Root I/O virtualization is supported.<BR>\r
1098 # FALSE - Single Root I/O virtualization is not supported.<BR>\r
1099 # @Prompt Enable SRIOV support.\r
1100 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
1101\r
1102 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r
1103 # TRUE - Alternative Routing-ID is supported.<BR>\r
1104 # FALSE - Alternative Routing-ID is not supported.<BR>\r
1105 # @Prompt Enable ARI support.\r
1106 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
1107\r
1108 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r
1109 # TRUE - Multi Root I/O virtualization is supported.<BR>\r
1110 # FALSE - Multi Root I/O virtualization is not supported.<BR>\r
1111 # @Prompt Enable MRIOV support.\r
1112 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
1113\r
1114 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r
1115 # BITN set indicates 2 of n+12 power<BR>\r
1116 # BIT0 set indicates 4KB alignment<BR>\r
1117 # BIT1 set indicates 8KB alignment<BR>\r
1118 # @Prompt SRIOV system page size.\r
1119 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
1120\r
35c77dae
LG		 1121 ## SMBIOS version.\r
1122 # @Prompt SMBIOS version.\r
fe44bae5 1123 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
fe781940 1124\r
fe44bae5
SZ		 1125 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
1126 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
1127 # @Prompt Pad size for extension FPDT boot records.\r
1c0cc375
LG		 1128 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
1129\r
fe44bae5
SZ		 1130 ## Indicates if ConIn device are connected on demand.<BR><BR>\r
1131 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
1132 # by Consplitter should be called before any real key read operation.<BR>\r
1133 # FALSE - ConIn device may be connected normally during BDS.<BR>\r
1134 # @Prompt ConIn connect on demand.\r
838a9c58 1135 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
1136\r
fe44bae5
SZ		 1137 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r
1138 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r
1139 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r
1140 # @Prompt Enable ATA S.M.A.R.T feature.\r
0e185864 1141 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
1142\r
fe44bae5
SZ		 1143 ## Indicates if full PCI enumeration is disabled.<BR><BR>\r
1144 # TRUE - Full PCI enumeration is disabled.<BR>\r
1145 # FALSE - Full PCI enumeration is not disabled.<BR>\r
1146 # @Prompt Disable full PCI enumeration.\r
5624a27d
WL		 1147 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
1148\r
fe44bae5 1149 ## Disk I/O - Number of Data Buffer block.\r
e645bd85 1150 # Define the size in block of the pre-allocated buffer. It provide better\r
fe44bae5
SZ		 1151 # performance for large Disk I/O requests.\r
1152 # @Prompt Disk I/O - Number of Data Buffer block.\r
e645bd85
OM		 1153 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
1154\r
097e8d68 1155[PcdsPatchableInModule]\r
fe44bae5
SZ		 1156 ## Specify memory size with page number for PEI code when\r
1157 # Loading Module at Fixed Address feature is enabled.\r
1158 # The value will be set by the build tool.\r
1159 # @Prompt LMFA PEI code page number.\r
1160 # @ValidList 0x80000001 | 0\r
54ea99a7 1161 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
1162 \r
fe44bae5
SZ		 1163 ## Specify memory size with page number for DXE boot time code when\r
1164 # Loading Module at Fixed Address feature is enabled.\r
1165 # The value will be set by the build tool.\r
1166 # @Prompt LMFA DXE boot code page number.\r
1167 # @ValidList 0x80000001 | 0\r
54ea99a7 1168 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
1169 \r
fe44bae5
SZ		 1170 ## Specify memory size with page number for DXE runtime code when\r
1171 # Loading Module at Fixed Address feature is enabled.\r
1172 # The value will be set by the build tool.\r
1173 # @Prompt LMFA DXE runtime code page number.\r
1174 # @ValidList 0x80000001 | 0\r
54ea99a7 1175 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
1176 \r
fe44bae5
SZ		 1177 ## Specify memory size with page number for SMM code when\r
1178 # Loading Module at Fixed Address feature is enabled.\r
1179 # The value will be set by the build tool.\r
1180 # @Prompt LMFA SMM code page number.\r
1181 # @ValidList 0x80000001 | 0\r
54ea99a7 1182 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
1183\r
88d20adc 1184[PcdsDynamic, PcdsDynamicEx]\r
1185 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
1186 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1187 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1188 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ		 1189 # @Prompt S3 Boot Script Table Private Data pointer.\r
1190 # @ValidList 0x80000001 | 0x0\r
88d20adc 1191 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
1192\r
3aa764ed
SZ		 1193 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
1194 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1195 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1196 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ		 1197 # @Prompt S3 Boot Script Table Private Smm Data pointer.\r
1198 # @ValidList 0x80000001 | 0x0\r
3aa764ed
SZ		 1199 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
1200\r
b5040e4c
EL		 1201 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 \r
1202 # Virtual to Physical mapping according to the processor physical address bits.\r
fe44bae5
SZ		 1203 # @Prompt Identify Mapping Page Table pointer.\r
1204 # @ValidList 0x80000001 | 0x0\r
b5040e4c 1205 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
fe44bae5
SZ		 1206\r
1207[UserExtensions.TianoCore."ExtraFiles"]\r
1208 MdeModulePkgExtra.uni\r
EFI Development Kit II mirror for PVE