Updated comment at line 595 to be PI 1.1 spec, instead of 1.0.
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
4f57ff18 1## @file MdeModulePkg.dec\r
2#\r
bf314e67 3# This package provides the modules that conform to EFI/PI Industry standards.\r
4# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) \r
5# and libraries instances, which are used for those modules.\r
b7d286b6 6#\r
4e17cc90 7# Copyright (c) 2007 - 2009, Intel Corporation.\r
b7d286b6 8#\r
9# All rights reserved.\r
4f57ff18 10# This program and the accompanying materials are licensed and made available under\r
11# the terms and conditions of the BSD License which accompanies this distribution.\r
12# The full text of the license may be found at\r
13# http://opensource.org/licenses/bsd-license.php\r
ed838d0c 14#\r
4f57ff18 15# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
16# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
b7d286b6 17#\r
4f57ff18 18##\r
b7d286b6 19\r
20\r
b7d286b6 21[Defines]\r
22 DEC_SPECIFICATION = 0x00010005\r
84e20859 23 PACKAGE_NAME = MdeModulePkg\r
b7d286b6 24 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
25 PACKAGE_VERSION = 0.1\r
26\r
3a98b778 27[Includes.common]\r
ed838d0c 28 Include\r
b7d286b6 29\r
30143b15 30\r
31[LibraryClasses.common]\r
4f57ff18 32 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 33 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 34 IpIoLib|Include/Library/IpIoLib.h\r
f02d0c0f 35 \r
4f57ff18 36 ## @libraryclass Basic function for UEFI network stack.\r
93367605 37 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 38 NetLib|Include/Library/NetLib.h\r
f02d0c0f 39 \r
4f57ff18 40 ## @libraryclass The helper routines to access UDP service.\r
93367605 41 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 42 UdpIoLib|Include/Library/UdpIoLib.h\r
f02d0c0f 43 \r
97b2c9b5
LG
44 ## @libraryclass Defines a set of methods to reset whole system.\r
45 ResetSystemLib|Include/Library/ResetSystemLib.h\r
46\r
4f57ff18 47 ## @libraryclass Defines a set of methods related do S3 mode.\r
4fb31c2c 48 S3Lib|Include/Library/S3Lib.h\r
f02d0c0f 49 \r
4f57ff18 50 ## @libraryclass Defines a set of methods related recovery mode.\r
4fb31c2c 51 RecoveryLib|Include/Library/RecoveryLib.h\r
f02d0c0f 52 \r
804dbc37 53 ## @libraryclass Provides HII related functions.\r
54 HiiLib|Include/Library/HiiLib.h\r
e602a223 55 \r
4f57ff18 56 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 57 CapsuleLib|Include/Library/CapsuleLib.h\r
f02d0c0f 58 \r
4f57ff18 59 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG
60 DpcLib|Include/Library/DpcLib.h\r
61\r
9a6dcbf3
LG
62 ## @libraryclass Provides global variables that are pointers \r
63 ## to the UEFI HII related protocols. \r
64 ##\r
da801a6e 65 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 66\r
88f20127 67[Guids.common]\r
f02d0c0f 68 ## MdeModule package token space guid\r
55e4e173 69 ## Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 70 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 71\r
f02d0c0f 72 ## Hob guid for Pcd DataBase\r
55e4e173 73 ## Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 74 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
f02d0c0f 75 \r
5c526736 76 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 77 # Include/Guid/MdeModuleHii.h\r
5c526736
LG
78 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
79 \r
80 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 81 # Include/Guid/MdeModuleHii.h\r
5c526736 82 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
f02d0c0f
LG
83 \r
84 ## Guid to specify the System Non Volatile FV\r
55e4e173 85 ## Include/Guid/SystemNvDataGuid.h\r
351986ae 86 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
f02d0c0f 87 \r
f02d0c0f 88 ## Guid specify the device is the console out device.\r
55e4e173 89 ## Include/Guid/ConsoleOutDevice.h\r
351986ae 90 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG
91\r
92 ## Guid specify the device is the console in device.\r
55e4e173 93 ## Include/Guid/ConsoleInDevice.h\r
351986ae 94 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f 95 \r
f02d0c0f 96 ## Hob and Variable guid specify the platform memory type information.\r
55e4e173 97 ## Include/Guid/MemoryTypeInformation.h\r
351986ae 98 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
f02d0c0f
LG
99 \r
100 ## Capsule update hob and variable guid\r
55e4e173 101 ## Include/Guid/CapsuleVendor.h\r
351986ae 102 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
93367605 103 \r
f02d0c0f 104 ## Guid specifiy the device is the StdErr device.\r
55e4e173 105 ## Include/Guid/StandardErrorDevice.h\r
88f20127 106 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f 107 \r
3709c4cd 108 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
109 ## Include/Guid/VariableFormat.h\r
110 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
f02d0c0f 111 \r
2db4a77e 112 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
113 ## Include/Guid/Performance.h\r
114 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
1df7a023 115\r
76f1dde2
LG
116 ## Guid is defined for CRC32 encapsulation scheme.\r
117 ## Include/Guid/Crc32GuidedSectionExtraction.h\r
118 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
119\r
63886849 120 ## Include/Guid/NicIp4ConfigNvData.h\r
121 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
122\r
5c526736 123[Protocols.common] \r
023c0fec 124 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
125 ## Include/Protocol/LoadPe32Image.h\r
126 ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
127 ## If developer need implement such functionality, they should use BasePeCoffLib.\r
128 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
129 \r
504dcb0a 130 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
55e4e173 131 ## Include/Protocol/Print2.h\r
504dcb0a 132 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
2dd4c603 133\r
346cf9ac 134 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
55e4e173 135 ## Include/Protocol/GenericMemoryTest.h\r
351986ae 136 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
f02d0c0f 137 \r
55e4e173 138 ## Include/Protocol/Dpc.h\r
36ee91ca 139 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
f02d0c0f 140 \r
85e923a5
LG
141 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
142 # Include/Protocol/FaultTolerantWrite.h\r
143 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
144 \r
145 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
146 # Include/Protocol/SwapAddressRange.h\r
147 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
8d4cd915 148 \r
a86ae184 149[PcdsFeatureFlag]\r
f02d0c0f 150 ## Indicate whether platform can support update capsule across a system reset\r
109e9a61 151 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
2a00326e 152 \r
f806dd27 153 ## This feature flag can be used to enable or disable all PCD PEIM services.\r
aa19fa57
LG
154 # If TRUE, all PCD PPI services will be produced.\r
155 ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
f806dd27
LG
156 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
157\r
f02d0c0f
LG
158 ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
159 # It can be disabled to save size.\r
348c8131 160 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
f02d0c0f
LG
161 \r
162 ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
163 # It can be disabled to save size.\r
348c8131 164 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
2a00326e 165 \r
fc9da5a6 166 ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
167 # stored as a vendor configuration table into the EFI system table.\r
5e895e6a 168 # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
169 # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can \r
170 # not output useful info.\r
33a5a666 171 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
f02d0c0f
LG
172 \r
173 ## If TRUE, Unicode Collation Protocol will be installed.\r
ac12a167 174 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
f02d0c0f
LG
175 \r
176 ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
ac12a167 177 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
f02d0c0f 178 \r
cebfa899 179 ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
180 # It could be set FALSE to save size.\r
d0c64728 181 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
f02d0c0f 182 \r
cebfa899 183 ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
184 # It could be set FALSE to save size.\r
d0c64728 185 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
f02d0c0f 186 \r
aa19fa57
LG
187 ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
188 # If TE section is not found, then PeiCore will search PE section.\r
189 # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
190 # This PCD is used to tune Pei phase performance to reduce the search image time.\r
191 # It can be set according to the generated image section type.\r
3076397e 192 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
f02d0c0f 193 \r
fc9da5a6 194 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
195 # interrupt to access usb device in the case of absence of usb stack.\r
196 ##\r
cc582cff 197 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
aa103f48 198\r
f02d0c0f
LG
199 ## If TRUE, HiiImageProtocol will be installed.\r
200 # FALSE is for size reduction.\r
813acf3a 201 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
f02d0c0f 202 \r
a8e1ed54 203 ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
204 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
205 # from HII database.\r
813acf3a 206 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 207\r
dae93068 208 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. \r
f806dd27
LG
209 # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
210 ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
211 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
223c22d8
LG
212 \r
213 ##\r
9dddc0ff 214 # If TRUE, HelloWorld Application will print the verbose information.\r
223c22d8
LG
215 # This PCD is a sample to explain FeatureFlag PCD usage.\r
216 ##\r
217 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 218\r
85e923a5
LG
219 ##\r
220 # If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
221 # If FASLE, only FTW Write service is available.\r
72670d3e 222 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
223\r
224 ##\r
225 # If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
226 # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
227 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 228\r
4e17cc90 229[PcdsFeatureFlag.IA32]\r
230 ## \r
231 # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
232 # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
233 # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
234 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
235 # is built in firmware.\r
236 #\r
237 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
238\r
a86ae184 239[PcdsFixedAtBuild]\r
1cedc893 240 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
241 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
242 # for a dynamic PCD used in PEI phase.\r
b3af5df6 243 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
9dddc0ff 244\r
1cedc893 245 ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
246 # to store PCD value. \r
247 #\r
b3af5df6 248 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
97b2c9b5 249 \r
1cedc893 250 ## Maximum number of FV is supported by PeiCore's dispatching.\r
177aabe6 251 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
f02d0c0f 252\r
1cedc893 253 ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
177aabe6 254 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
f02d0c0f 255\r
1cedc893 256 ## Maximum stack size for PeiCore.\r
58dcdada 257 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
f02d0c0f 258\r
1cedc893 259 ## Maximum PPI count is supported by PeiCore's PPI database.\r
eaf539d0 260 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
f02d0c0f 261 \r
2fcdca1d 262 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
263 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
264 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
265 # be reflushed through the manner of fault tolerant write. \r
b3af5df6 266 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
f02d0c0f 267 \r
2fcdca1d 268 ## The maximum size of single common variable, that is non-HwErr type varible.\r
518d395c 269 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
f02d0c0f 270 \r
2fcdca1d 271 ## The maximum size of single hardware error record variable.\r
272 # In IA32/X64 platforms, this value should be larger than 1KB.\r
273 # In IA64 platforms, this value should be larger than 128KB.\r
518d395c 274 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
f02d0c0f 275 \r
2fcdca1d 276 ## The size of reserved HwErr variable space. This space is located at NV variable range.\r
277 # HwErr type variable is stored with common non-volatile variables in NV region.\r
278 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
279 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006\r
280\r
281 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
518d395c 282 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
2fcdca1d 283\r
284 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
285 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
286 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
287 # be reflushed through the manner of fault tolerant write.\r
b3af5df6 288 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
a86ae184 289 \r
f02d0c0f 290 ## Size of the FTW working block range.\r
b3af5df6 291 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
3c506ddd 292\r
293 ## FFS filename to find the ACPI tables\r
294 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r
295\r
a86ae184 296[PcdsFixedAtBuild,PcdsPatchableInModule]\r
f02d0c0f 297 ## Maximun number of performance log entries during PEI phase.\r
348c8131 298 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 299\r
300 ## RTC Update Timeout Value\r
301 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
a86ae184 302 \r
303[PcdsPatchableInModule,PcdsDynamic]\r
4bfa7dc4 304 ##\r
305 # This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
306 ##\r
307 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
308 \r
309 ##\r
310 # This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
311 ##\r
4e17cc90 312 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
a86ae184 313 \r
314[PcdsFixedAtBuild,PcdsDynamic]\r
315 ## Base address of the NV variable range in flash device \r
316 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
317 \r
318 ## Base address of the FTW spare block range in flash device.\r
319 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 \r
320 \r
321 ## Base address of the FTW working block range in flash device.\r
322 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 \r
323 \r
223c22d8 324 ##\r
a86ae184 325 # This PCD defines the print string.\r
4e17cc90 326 # This PCD is a sample to explain String typed PCD usage.\r
223c22d8 327 ##\r
a86ae184 328 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 \r
329 \r
4e17cc90 330[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
331 ##\r
332 # This PCD defines the times to print hello world string.\r
333 # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
334 ##\r
335 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 336\r
4e17cc90 337 ## Indicate the max size of the populated capsule image that the platform can support.\r
338 # The default max size is 100MB (0x6400000) for more than one large capsule images. \r
339 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
340 \r
341 ## Indicate the max size of the non-populated capsule image that the platform can support.\r
342 # The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r
343 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 344\r
345 ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
346 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050\r
347 \r
348 ## Firmware revision that is default value filled into the EFI System Table\r
349 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
350\r
351 ## Null-terminated Unicode string that described the firmware version\r
352 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052 \r
353 \r
354 ## Null-terminated Unicode string that contains the date the formware was released\r
355 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
356\r