[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec

## @file  MdeModulePkg.dec\r
#\r
# This package provides the modules that conform to UEFI/PI Industry standards.\r
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>\r
# This program and the accompanying materials are licensed and made available under \r
# the terms and conditions of the BSD License that accompanies this distribution.  \r
# The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php.                                                                          \r
# \r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.  \r
#\r
##\r
\r
\r
[Defines]\r
  DEC_SPECIFICATION              = 0x00010005\r
  PACKAGE_NAME                   = MdeModulePkg\r
  PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
  PACKAGE_VERSION                = 0.92\r
\r
[Includes]\r
  Include\r
\r
\r
[LibraryClasses]\r
  ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.\r
  #   This library is only intended to be used by UEFI network stack modules.\r
  IpIoLib|Include/Library/IpIoLib.h\r
\r
  ##  @libraryclass  Basic function for UEFI network stack.\r
  #   This library is only intended to be used by UEFI network stack modules.\r
  NetLib|Include/Library/NetLib.h\r
\r
  ##  @libraryclass  The helper routines to access UDP service.\r
  #   This library is only intended to be used by UEFI network stack modules.\r
  UdpIoLib|Include/Library/UdpIoLib.h\r
\r
  ##  @libraryclass  The helper routines to access TCP service.\r
  #   This library is only intended to be used by UEFI network stack modules.\r
  TcpIoLib|Include/Library/TcpIoLib.h\r
\r
  ##  @libraryclass  Defines a set of methods to reset whole system.\r
  ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
  ##  @libraryclass  Defines a set of methods related do S3 mode.\r
  #   This library class is no longer used and modules using this library should\r
  #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
  S3Lib|Include/Library/S3Lib.h\r
\r
  ##  @libraryclass  Defines a set of methods related recovery mode.\r
  #   This library class is no longer used and modules using this library should\r
  #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
  RecoveryLib|Include/Library/RecoveryLib.h\r
\r
  ##  @libraryclass  Provides HII related functions.\r
  HiiLib|Include/Library/HiiLib.h\r
\r
  ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.\r
  CapsuleLib|Include/Library/CapsuleLib.h\r
\r
  ##  @libraryclass  Library for Deferred Procedure Calls.\r
  DpcLib|Include/Library/DpcLib.h\r
\r
  ##  @libraryclass    Provides global variables that are pointers\r
  #   to the UEFI HII related protocols.\r
  #\r
  UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
\r
  ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.\r
  #\r
  SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
\r
  ##  @libraryclass  OEM status code libary is used to report status code to OEM device.\r
  #\r
  OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
\r
  ##  @libraryclass  Debug Agent is used to provide soft debug capability.\r
  #\r
  DebugAgentLib|Include/Library/DebugAgentLib.h\r
\r
  ##  @libraryclass  Provide platform specific hooks.\r
  #\r
  PlatformHookLib|Include/Library/PlatformHookLib.h\r
\r
  ##  @libraryclass  Provide platform specific hooks for SMM core.\r
  #\r
  SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
\r
  ##  @libraryclass  Provide capability to maintain the data integrity cross S3 phase.\r
  #\r
  LockBoxLib|Include/Library/LockBoxLib.h\r
  \r
  ##  @libraryclass  Provide the CPU exception handler.\r
  #\r
  CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
  \r
[Guids]\r
  ## MdeModule package token space guid\r
  # Include/Guid/MdeModulePkgTokenSpace.h\r
  gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
\r
  ## Hob guid for Pcd DataBase\r
  #  Include/Guid/PcdDataBaseHobGuid.h\r
  gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
\r
  ## Guid for EDKII implementation GUIDed opcodes\r
  #  Include/Guid/MdeModuleHii.h\r
  gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
\r
  ## Guid for Framework vfr GUIDed opcodes.\r
  #  Include/Guid/MdeModuleHii.h\r
  gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
\r
  ## Guid to specify the System Non Volatile FV\r
  #  Include/Guid/SystemNvDataGuid.h\r
  gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
\r
  ## GUID used as the signature of FTW working block header.\r
  #  Include/Guid/SystemNvDataGuid.h\r
  gEdkiiWorkingBlockSignatureGuid   = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
\r
  ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
  #  Include/Guid/FaultTolerantWrite.h\r
  gEdkiiFaultTolerantWriteGuid      = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83,  0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
\r
  ## Guid specify the device is the console out device.\r
  #  Include/Guid/ConsoleOutDevice.h\r
  gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
\r
  ## Guid specify the device is the console in device.\r
  #  Include/Guid/ConsoleInDevice.h\r
  gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
\r
  ## Hob and Variable guid specify the platform memory type information.\r
  #  Include/Guid/MemoryTypeInformation.h\r
  gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
\r
  ## Capsule update hob and variable guid\r
  #  Include/Guid/CapsuleVendor.h\r
  gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
\r
  ## Guid specifiy the device is the StdErr device.\r
  #  Include/Guid/StandardErrorDevice.h\r
  gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
\r
  ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
  #  Include/Guid/VariableFormat.h\r
  gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
\r
  #  Include/Guid/VariableIndexTable.h\r
  gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
\r
  ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
  #  Include/Guid/SmmVariableCommon.h\r
  gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
  \r
  ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
  #  Include/Guid/Performance.h\r
  gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
  gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa,  0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
  gPerformanceExProtocolGuid     = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1,  0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
  gSmmPerformanceExProtocolGuid  = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6,  0x30, 0xe3, 0xe,  0xe5 } }\r
\r
  ## Guid is defined for CRC32 encapsulation scheme.\r
  #  Include/Guid/Crc32GuidedSectionExtraction.h\r
  gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
  ## Include/Guid/NicIp4ConfigNvData.h\r
  gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
\r
  ## Include/Guid/StatusCodeCallbackGuid.h\r
  gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
\r
  ## GUID identifies status code records HOB that originate from the PEI status code\r
  #  Include/Guid/MemoryStatusCodeRecord.h\r
  gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
\r
  ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
  #  Include/Guid/StatusCodeDataTypeDebug.h\r
  gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
\r
  ##  A configuration Table Guid for Load module at fixed address \r
  #  Include/Guid/LoadModuleAtFixedAddress.h\r
  gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
\r
  ## GUID used to store the global debug mask value into an EFI Variable\r
  # Include/Guid/DebugMask.h  \r
  gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
  \r
  ##  Event for the DXE Core to signal idle events\r
  #  Include/Guid/EventIdle.h\r
  gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
\r
  ## Include/Guid/RecoveryDevice.h\r
  gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
\r
  ## Include/Guid/RecoveryDevice.h\r
  gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
\r
  ## Include/Guid/RecoveryDevice.h\r
  gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
\r
  ## Include/Guid/RecoveryDevice.h\r
  gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
\r
  ## Include/Guid/SmmLockBox.h\r
  gEfiSmmLockBoxCommunicationGuid    = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
\r
  ## Include/Guid/AcpiS3Context.h\r
  gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
\r
  ## Include/Guid/AcpiS3Context.h\r
  gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
\r
  ## Include/Guid/BootScriptExecutorVariable.h\r
  gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
  gEfiBootScriptExecutorContextGuid  = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
\r
  ## Include/Guid/UsbKeyBoardLayout.h\r
  gUsbKeyboardLayoutPackageGuid      = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
  gUsbKeyboardLayoutKeyGuid          = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
  \r
  ## Include/Guid/HiiResourceSampleHii.h\r
  gHiiResourceSamleFormSetGuid       = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
\r
  ## Include/Guid/DriverSampleHii.h\r
  gDriverSampleFormSetGuid           = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
  gDriverSampleInventoryGuid         = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
  gEfiIfrRefreshIdOpGuid             = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
\r
  ## Include/Guid/PlatDriOverrideHii.h\r
  gPlatformOverridesManagerGuid      = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
  ## Include/Guid/Ip4ConfigHii.h\r
  gNicIp4ConfigNvDataGuid            = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
\r
  ## Include/Guid/VlanConfigHii.h\r
  gVlanConfigFormSetGuid             = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
\r
  ## Include/Guid/Ip4IScsiConfigHii.h\r
  gIp4IScsiConfigGuid                = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
  gIScsiCHAPAuthInfoGuid             = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
\r
  ## Include/Guid/ZeroGuid.h\r
  gZeroGuid                          = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
  \r
  ## Include/Guid/MtcVendor.h\r
  gMtcVendorGuid                     = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
\r
  ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
  #  Include/Guid/FirmwarePerformance.h\r
  gEfiFirmwarePerformanceGuid        = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
  gFirmwarePerformanceS3PointerGuid  = { 0xdc65adc,  0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
\r
  ## Include/Guid/ExitBootServiceFailed.h\r
  gEventExitBootServicesFailedGuid   = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
\r
  ## Include/Guid/ConnectConInEvent.h\r
  gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
\r
[Ppis]\r
  ## Include/Ppi/AtaController.h\r
  gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
\r
  ## Include/Ppi/UsbHostController.h\r
  gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
\r
  ## Include/Ppi/Usb2HostController.h\r
  gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}\r
\r
  ## Include/Ppi/UsbController.h\r
  gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
\r
  ## Include/Ppi/UsbIo.h\r
  gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
\r
  ## Include/Ppi/Capsule.h\r
  gPeiCapsulePpiGuid             = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
\r
  ## Include/Ppi/SecPerformance.h\r
  gPeiSecPerformancePpiGuid      = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
\r
  ## Include/Ppi/SmmCommunication.h\r
  gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
\r
  ## Include/Ppi/SmmAccess.h\r
  gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
\r
  ## Include/Ppi/SmmControl.h\r
  gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
\r
  ## Include/Ppi/PostBootScriptTable.h\r
  gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
\r
[Protocols]\r
  ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
  #  Include/Protocol/LoadPe32Image.h\r
  #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
  #  If developer need implement such functionality, they should use BasePeCoffLib.\r
  gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
\r
  ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
  # Include/Protocol/Print2.h\r
  gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
\r
  ## This protocol defines the generic memory test interfaces in Dxe phase.\r
  # Include/Protocol/GenericMemoryTest.h\r
  gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
\r
  ## Include/Protocol/Dpc.h\r
  gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
\r
  ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
  #  Include/Protocol/FaultTolerantWrite.h\r
  gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
\r
  ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
  #  Include/Protocol/SmmFaultTolerantWrite.h\r
  gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
  \r
  ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
  #  Include/Protocol/SwapAddressRange.h\r
  gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
  \r
  ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
  #  Include/Protocol/SmmSwapAddressRange.h\r
  gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
  \r
  ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
  #  Include/Protocol/SmmVariableProtocol.h\r
  gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
\r
  ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
  #  Include/Protocol/VariableLock.h\r
  gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
\r
  ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
  #  Include/Protocol/SmmFirmwareVolumeBlock.h\r
  gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
\r
  ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
  # Include/Guid/DebugMask.h  \r
  gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
\r
  ## Include/Protocol/LockBox.h\r
  gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
  \r
  ## Include/Protocol/FormBrowserEx.h\r
  gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
\r
  ## Include/Protocol/EbcVmTest.h\r
  gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
\r
  ## Include/Protocol/EbcSimpleDebugger.h\r
  gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
\r
  ## Include/Protocol/BootLogo.h\r
  gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
\r
[PcdsFeatureFlag]\r
  ## Indicate whether platform can support update capsule across a system reset\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
\r
  ## This feature flag can be used to enable or disable all PCD PEIM services.\r
  #  If TRUE, all PCD PPI services will be produced.\r
  #  If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
\r
  ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
  #  It can be disabled to save size.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
\r
  ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
  #  It can be disabled to save size.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
\r
  ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
  #  stored as a vendor configuration table into the EFI system table.\r
  #  If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
  #  variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
  #  not output useful info.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
\r
  ## If TRUE, Unicode Collation Protocol will be installed.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
\r
  ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
\r
  ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
  #  It could be set FALSE to save size.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
\r
  ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
  #  It could be set FALSE to save size.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
\r
  ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
  #  If TE section is not found, then PeiCore will search PE section.\r
  #  If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
  #  This PCD is used to tune Pei phase performance to reduce the search image time.\r
  #  It can be set according to the generated image section type.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
\r
  ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
  #  interrupt to access usb device in the case of absence of usb stack. \r
  #  DUET platform requires the token to be TRUE.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
  \r
  ## If TRUE, HiiImageProtocol will be installed.\r
  #  FALSE is for size reduction.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
\r
  ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
  #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
  #  from HII database.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
\r
  ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
  #  If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
  #  This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
\r
  ## If TRUE, HelloWorld Application will print the verbose information.\r
  #  This PCD is a sample to explain FeatureFlag PCD usage.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
\r
  ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
  #  If FASLE, only FTW Write service is available.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
\r
  ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
  #  If FALSE, DXE IPL will not support UEFI decompression to save space.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
\r
  ## This PCD specifies whether PciBus supports the hot plug device.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
\r
  ## This PCD specifies whether the PCI bus driver probes non-standard, \r
  #  such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
  ## This PCD specifies whether StatusCode is reported via Serial port.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
\r
  ## This PCD specifies whether StatusCode is stored in memory.\r
  #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
\r
  ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
\r
  ## This PCD specified whether ACPI SDT protocol is installed.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
\r
  ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
  #  If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
  #  The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
\r
  ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
  #  If TRUE,  TEXT statement will always be set to GrayOut.\r
  #  If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
  \r
  ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.\r
  # If TRUE, the unselectable menu will be set to GrayOut.\r
  # If FALSE, the menu will be show as normal menu entry even if it is not selectable.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
\r
  ## If TRUE, recovery from IDE disk will be supported.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
\r
  ## If TRUE, recovery from FAT floppy disk will be supported.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
\r
  ## If TRUE, recovery from data CD will be supported.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
\r
  ## If TRUE, recovery from FAT USB disk will be supported.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
\r
  ## If TRUE, S3 performance data will be supported in ACPI FPDT table.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
  ##\r
  # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
  # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
  # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
  # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
  # is built in firmware.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
\r
  ##\r
  # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r
  # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
\r
[PcdsFixedAtBuild]\r
  ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
  #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
  #  for a dynamic PCD used in PEI phase.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
\r
  ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
  #  to store PCD value.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
\r
  ## Maximum number of FV is supported by PeiCore's dispatching.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
\r
  ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
\r
  ## Maximum stack size for PeiCore.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
\r
  ## Maximum PPI count is supported by PeiCore's PPI database.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
\r
  ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
  #  The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
  #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
  #  be reflushed through the manner of fault tolerant write.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
\r
  ## The maximum size of single common variable, that is non-HwErr type varible.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
\r
  ## The maximum size of single hardware error record variable.\r
  # In IA32/X64 platforms, this value should be larger than 1KB.\r
  # In IA64 platforms, this value should be larger than 128KB.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
\r
  ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r
  # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
  # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
  # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
\r
  ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
\r
  ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
  # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
  # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
  # be reflushed through the manner of fault tolerant write.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
\r
  ## Size of the FTW working block range.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
\r
  ## FFS filename to find the ACPI tables\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
\r
  ## FFS filename to find the capsule coalesce image.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
\r
  ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
  #  -1: Enable the feature as fixed offset to TOLM\r
  #   0: Disable the feature.\r
  #  Positive Value:  Enable the feature as fixed absolute address, and the value is the top memory address \r
  gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
\r
  ## Smbios version\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
\r
  ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
  #  to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
\r
  ## Progress Code for OS Loader LoadImage start.\r
  #  PROGRESS_CODE_OS_LOADER_LOAD   = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
\r
  ## Progress Code for OS Loader StartImage start.\r
  #  PROGRESS_CODE_OS_LOADER_START  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
\r
  ## Progress Code for S3 Suspend start.\r
  #  PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000))    = 0x03078000\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
\r
  ## Progress Code for S3 Suspend end.\r
  #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
\r
[PcdsFixedAtBuild,PcdsPatchableInModule]\r
  ## Maximun number of performance log entries during PEI phase.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
\r
  ## RTC Update Timeout Value\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
\r
  ## If TRUE, then 16550 serial port registers are in MMIO space.  \r
  #  If FALSE, then 16550 serial port registers are in I/O space.  Default value.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
  \r
  ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
  #  If FALSE, then the 16550 serial port hardware flow control is disabled.  Default value.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
\r
  ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
  #  If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
  #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
    \r
  ## Base address of 16550 serial port registers in MMIO or I/O space.  Default is 0x3F8.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
\r
  ## Baud rate for the 16550 serial port.  Default is 115200 baud.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
\r
  ## Line Control Register (LCR) for the 16550 serial port.  This encodes data bits, parity, and stop bits.  \r
  #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
  #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
  #    BIT5..BIT2 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
  #    BIT7..BIT6 - Reserved.  Must be 0.\r
  #\r
  # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
\r
  ## FIFO Control Register (FCR) for the 16550 serial port.   \r
  #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.\r
  #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.\r
  #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.\r
  #    BIT4..BIT3 - Reserved.  Must be 0.\r
  #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO\r
  #    BIT7..BIT6 - Reserved.  Must be 0.\r
  #\r
  # Default is to enable and clear all FIFOs.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
\r
  ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
  #  structure.  The default value for this PCD is 0, which means that the DXE Core\r
  #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
  #  boundary as close to the top of memory as feasible.  If this PCD is set to a \r
  #  value other than 0, then the DXE Core will first attempt to allocate the \r
  #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
  #  by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
  #  boundary as close to the top of memory as feasible.\r
  #\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
\r
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
  ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r
  #  This PCD could be set to 0 then console output could be at max column and max row.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
  ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.\r
  #  This PCD could be set to 0 then console output could be at max column and max row.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
\r
  ## This PCD defines the video horizontal resolution.\r
  #  This PCD could be set to 0 then video resolution could be at highest resolution.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
\r
  ## This PCD defines the video vertical resolution.\r
  #  This PCD could be set to 0 then video resolution could be at highest resolution.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
\r
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
  ## Base address of the NV variable range in flash device\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
\r
  ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
\r
  ## Base address of the FTW working block range in flash device.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
\r
  ## 64-bit Base address of the NV variable range in flash device\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
\r
  ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
\r
  ## 64-bit Base address of the FTW working block range in flash device.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
\r
  ## This PCD defines the print string.\r
  #  This PCD is a sample to explain String typed PCD usage.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
\r
  ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r
  #  The range is valid if non-zero.  The memory range size must be PcdVariableStoreSize.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
\r
  ## This PCD specifies whether the Single Root I/O virtualization support.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
\r
  ## Single root I/O virtualization virtual function memory BAR alignment\r
  #  BITN set indicates 2 of n+12 power\r
  #  BIT0 set indicates 4KB alignment\r
  #  BIT1 set indicates 8KB alignment\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
\r
  ## This PCD specifies whether the Alternative Routing-ID support.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
\r
  ## This PCD specifies whether the Multi Root I/O virtualization support.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
  ## This PCD defines the times to print hello world string.\r
  #  This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
\r
  ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
  #  The default max size is 100MB (0x6400000) for more than one large capsule images.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
\r
  ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
  #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
\r
  ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
\r
  ## Firmware revision that is default value filled into the EFI System Table\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
\r
  ## Null-terminated Unicode string that described the firmware version\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
\r
  ## Null-terminated Unicode string that contains the date the formware was released\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
\r
  ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r
  #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r
  #  The default value in PeiPhase is 1 KBytes.\r
  #  The default value in DxePhase is 128 KBytes.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
\r
  ## This PCD specifies whether to reset system when memory type information changes.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
\r
  ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
  #  Only following values defined in UEFI specification are valid:\r
  #  0x00 (EFI_BLACK)\r
  #  0x01 (EFI_BLUE)\r
  #  0x02 (EFI_GREEN)\r
  #  0x03 (EFI_CYAN)\r
  #  0x04 (EFI_RED)\r
  #  0x05 (EFI_MAGENTA)\r
  #  0x06 (EFI_BROWN)\r
  #  0x07 (EFI_LIGHTGRAY)\r
  #  0x08 (EFI_DARKGRAY) \r
  #  0x09 (EFI_LIGHTBLUE)\r
  #  0x0A (EFI_LIGHTGREEN)\r
  #  0x0B (EFI_LIGHTCYAN)\r
  #  0x0C (EFI_LIGHTRED)\r
  #  0x0D (EFI_LIGHTMAGENTA)\r
  #  0x0E (EFI_YELLOW)\r
  #  0x0F (EFI_WHITE)\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
  \r
  ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
  #  Only following values defined in UEFI specification are valid:\r
  #  0x00 (EFI_BLACK)\r
  #  0x01 (EFI_BLUE)\r
  #  0x02 (EFI_GREEN)\r
  #  0x03 (EFI_CYAN)\r
  #  0x04 (EFI_RED)\r
  #  0x05 (EFI_MAGENTA)\r
  #  0x06 (EFI_BROWN)\r
  #  0x07 (EFI_LIGHTGRAY)\r
  #  0x08 (EFI_DARKGRAY) \r
  #  0x09 (EFI_LIGHTBLUE)\r
  #  0x0A (EFI_LIGHTGREEN)\r
  #  0x0B (EFI_LIGHTCYAN)\r
  #  0x0C (EFI_LIGHTRED)\r
  #  0x0D (EFI_LIGHTMAGENTA)\r
  #  0x0E (EFI_YELLOW)\r
  #  0x0F (EFI_WHITE)\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
  \r
  ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
  #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
  #  0x00 (EFI_BLACK)\r
  #  0x01 (EFI_BLUE)\r
  #  0x02 (EFI_GREEN)\r
  #  0x03 (EFI_CYAN)\r
  #  0x04 (EFI_RED)\r
  #  0x05 (EFI_MAGENTA)\r
  #  0x06 (EFI_BROWN)\r
  #  0x07 (EFI_LIGHTGRAY)\r
  #  0x08 (EFI_DARKGRAY) \r
  #  0x09 (EFI_LIGHTBLUE)\r
  #  0x0A (EFI_LIGHTGREEN)\r
  #  0x0B (EFI_LIGHTCYAN)\r
  #  0x0C (EFI_LIGHTRED)\r
  #  0x0D (EFI_LIGHTMAGENTA)\r
  #  0x0E (EFI_YELLOW)\r
  #  0x0F (EFI_WHITE)\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
  \r
  ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
  #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
  #  0x00 (EFI_BACKGROUND_BLACK)\r
  #  0x10 (EFI_BACKGROUND_BLUE)\r
  #  0x20 (EFI_BACKGROUND_GREEN)\r
  #  0x30 (EFI_BACKGROUND_CYAN)\r
  #  0x40 (EFI_BACKGROUND_RED)\r
  #  0x50 (EFI_BACKGROUND_MAGENTA)\r
  #  0x60 (EFI_BACKGROUND_BROWN)\r
  #  0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
\r
  ## Time in second to delay for SATA devices to spin-up for recovery.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
\r
  ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
  #  runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
  #  PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
  #  script node created in runtime phase.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
\r
  ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
  #  The default size 32K. When changing the value of this PCD, the platform developer should\r
  #  make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
\r
  ## This PCD specifies whether 1G page table is enabled.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
\r
  ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for \r
  #  the extension FPDT boot records got after ReadyToBoot and before ExitBootService.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
\r
  ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn\r
  #  device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
  #  by Consplitter should be called before any real key read operation.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
\r
  ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
\r
[PcdsPatchableInModule]\r
  ## Specify  memory size with page number for PEI code when \r
  #  the feature of Loading Module at Fixed Address is enabled\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
  \r
  ## Specify  memory size with page number for DXE boot time code when \r
  #  the feature of Loading Module at Fixed Address is enabled\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
  \r
  ## Specify  memory size with page number for DXE runtime code when \r
  #  the feature of Loading Module at Fixed Address is enabled\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
 \r
  ## Specify  memory size with page number for SMM code when \r
  #  the feature of Loading Module at Fixed Address is enabled\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
\r
[PcdsDynamic, PcdsDynamicEx]\r
  ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
  #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
  #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
  #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
\r
  ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
  #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
  #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
  #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
  gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
\r