Update DEBUG log information to specify SMM driver to be loaded in SmmCore
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
e3e134eb 1## @file MdeModulePkg.dec\r
4f57ff18 2#\r
a9141950 3# This package provides the modules that conform to UEFI/PI Industry standards.\r
73850864 4# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
bf314e67 5# and libraries instances, which are used for those modules.\r
b7d286b6 6#\r
784ce127 7# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>\r
64a80549 8# This program and the accompanying materials are licensed and made available under \r
9# the terms and conditions of the BSD License that accompanies this distribution. \r
4f57ff18 10# The full text of the license may be found at\r
64a80549 11# http://opensource.org/licenses/bsd-license.php. \r
12# \r
13# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
14# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
b7d286b6 15#\r
4f57ff18 16##\r
b7d286b6 17\r
18\r
b7d286b6 19[Defines]\r
20 DEC_SPECIFICATION = 0x00010005\r
84e20859 21 PACKAGE_NAME = MdeModulePkg\r
b7d286b6 22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
a9141950 23 PACKAGE_VERSION = 0.91\r
b7d286b6 24\r
6bfbb5f0 25[Includes]\r
ed838d0c 26 Include\r
b7d286b6 27\r
30143b15 28\r
6bfbb5f0 29[LibraryClasses]\r
4f57ff18 30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 31 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 32 IpIoLib|Include/Library/IpIoLib.h\r
73850864 33\r
4f57ff18 34 ## @libraryclass Basic function for UEFI network stack.\r
93367605 35 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 36 NetLib|Include/Library/NetLib.h\r
73850864 37\r
4f57ff18 38 ## @libraryclass The helper routines to access UDP service.\r
93367605 39 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 40 UdpIoLib|Include/Library/UdpIoLib.h\r
73850864 41\r
4bad9ada 42 ## @libraryclass The helper routines to access TCP service.\r
43 # This library is only intended to be used by UEFI network stack modules.\r
44 TcpIoLib|Include/Library/TcpIoLib.h\r
45\r
97b2c9b5
LG
46 ## @libraryclass Defines a set of methods to reset whole system.\r
47 ResetSystemLib|Include/Library/ResetSystemLib.h\r
48\r
4f57ff18 49 ## @libraryclass Defines a set of methods related do S3 mode.\r
05d71050 50 # This library class is no longer used and modules using this library should\r
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
4fb31c2c 52 S3Lib|Include/Library/S3Lib.h\r
73850864 53\r
4f57ff18 54 ## @libraryclass Defines a set of methods related recovery mode.\r
05d71050 55 # This library class is no longer used and modules using this library should\r
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
4fb31c2c 57 RecoveryLib|Include/Library/RecoveryLib.h\r
73850864 58\r
804dbc37 59 ## @libraryclass Provides HII related functions.\r
60 HiiLib|Include/Library/HiiLib.h\r
73850864 61\r
4f57ff18 62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 63 CapsuleLib|Include/Library/CapsuleLib.h\r
73850864 64\r
4f57ff18 65 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG
66 DpcLib|Include/Library/DpcLib.h\r
67\r
73850864 68 ## @libraryclass Provides global variables that are pointers\r
a90ccab8
LG
69 # to the UEFI HII related protocols.\r
70 #\r
da801a6e 71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 72\r
cd98f305
LG
73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
74 #\r
75 SecurityManagementLib|MdeModulePkg/Include/Library/SecurityManagementLib.h\r
76\r
75dea6bd 77 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
78 #\r
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
80\r
fe92ab29 81 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
82 #\r
83 DebugAgentLib|Include/Library/DebugAgentLib.h\r
6eea8eae 84\r
467d15ae 85 ## @libraryclass Provide platform specific hooks.\r
86 #\r
87 PlatformHookLib|Include/Library/PlatformHookLib.h\r
88 \r
6bfbb5f0 89[Guids]\r
f02d0c0f 90 ## MdeModule package token space guid\r
a90ccab8 91 # Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 92 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 93\r
f02d0c0f 94 ## Hob guid for Pcd DataBase\r
a90ccab8 95 # Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 96 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
73850864 97\r
5c526736 98 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 99 # Include/Guid/MdeModuleHii.h\r
5c526736 100 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
73850864 101\r
5c526736 102 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 103 # Include/Guid/MdeModuleHii.h\r
5c526736 104 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
73850864 105\r
f02d0c0f 106 ## Guid to specify the System Non Volatile FV\r
a90ccab8 107 # Include/Guid/SystemNvDataGuid.h\r
351986ae 108 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
73850864 109\r
f02d0c0f 110 ## Guid specify the device is the console out device.\r
a90ccab8 111 # Include/Guid/ConsoleOutDevice.h\r
351986ae 112 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG
113\r
114 ## Guid specify the device is the console in device.\r
a90ccab8 115 # Include/Guid/ConsoleInDevice.h\r
351986ae 116 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 117\r
f02d0c0f 118 ## Hob and Variable guid specify the platform memory type information.\r
a90ccab8 119 # Include/Guid/MemoryTypeInformation.h\r
351986ae 120 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
73850864 121\r
f02d0c0f 122 ## Capsule update hob and variable guid\r
a90ccab8 123 # Include/Guid/CapsuleVendor.h\r
351986ae 124 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
73850864 125\r
f02d0c0f 126 ## Guid specifiy the device is the StdErr device.\r
a90ccab8 127 # Include/Guid/StandardErrorDevice.h\r
88f20127 128 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 129\r
3709c4cd 130 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
a90ccab8 131 # Include/Guid/VariableFormat.h\r
3709c4cd 132 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
73850864 133\r
2db4a77e 134 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
a90ccab8 135 # Include/Guid/Performance.h\r
2db4a77e 136 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
1df7a023 137\r
76f1dde2 138 ## Guid is defined for CRC32 encapsulation scheme.\r
a90ccab8 139 # Include/Guid/Crc32GuidedSectionExtraction.h\r
76f1dde2
LG
140 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
141\r
63886849 142 ## Include/Guid/NicIp4ConfigNvData.h\r
143 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
25126a05 144\r
145 ## Include/Guid/StatusCodeCallbackGuid.h\r
146 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
63886849 147\r
10c5d87e 148 ## GUID identifies status code records HOB that originate from the PEI status code\r
149 # Include/Guid/MemoryStatusCodeRecord.h\r
150 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
151\r
152 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
153 # Include/Guid/StatusCodeDataTypeDebug.h\r
154 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
155\r
54ea99a7 156 ## A configuration Table Guid for Load module at fixed address \r
157 # Include/Guid/LoadModuleAtFixedAddress.h\r
158 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
159\r
6bfbb5f0 160[Protocols]\r
023c0fec 161 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
a90ccab8
LG
162 # Include/Protocol/LoadPe32Image.h\r
163 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
164 # If developer need implement such functionality, they should use BasePeCoffLib.\r
023c0fec 165 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
73850864 166\r
504dcb0a 167 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
a90ccab8 168 # Include/Protocol/Print2.h\r
504dcb0a 169 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
2dd4c603 170\r
346cf9ac 171 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
a90ccab8 172 # Include/Protocol/GenericMemoryTest.h\r
351986ae 173 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
73850864 174\r
55e4e173 175 ## Include/Protocol/Dpc.h\r
36ee91ca 176 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
73850864 177\r
85e923a5
LG
178 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
179 # Include/Protocol/FaultTolerantWrite.h\r
180 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
73850864 181\r
8a2d4996 182 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
183 # Include/Protocol/SmmFaultTolerantWrite.h\r
184 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
185 \r
85e923a5
LG
186 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
187 # Include/Protocol/SwapAddressRange.h\r
188 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
8a2d4996 189 \r
190 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
191 # Include/Protocol/SmmSwapAddressRange.h\r
192 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
193 \r
194 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
195 # Include/Protocol/SmmVariableProtocol.h\r
196 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
197\r
198 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
199 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
200 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
73850864 201\r
a86ae184 202[PcdsFeatureFlag]\r
f02d0c0f 203 ## Indicate whether platform can support update capsule across a system reset\r
109e9a61 204 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
73850864 205\r
f806dd27 206 ## This feature flag can be used to enable or disable all PCD PEIM services.\r
aa19fa57 207 # If TRUE, all PCD PPI services will be produced.\r
a90ccab8 208 # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
f806dd27
LG
209 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
210\r
f02d0c0f
LG
211 ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
212 # It can be disabled to save size.\r
348c8131 213 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
73850864 214\r
f02d0c0f
LG
215 ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
216 # It can be disabled to save size.\r
348c8131 217 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
73850864 218\r
fc9da5a6 219 ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
220 # stored as a vendor configuration table into the EFI system table.\r
5e895e6a 221 # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
73850864 222 # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
5e895e6a 223 # not output useful info.\r
33a5a666 224 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
73850864 225\r
f02d0c0f 226 ## If TRUE, Unicode Collation Protocol will be installed.\r
ac12a167 227 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
73850864 228\r
f02d0c0f 229 ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
ac12a167 230 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
73850864 231\r
cebfa899 232 ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
233 # It could be set FALSE to save size.\r
d0c64728 234 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
73850864 235\r
cebfa899 236 ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
237 # It could be set FALSE to save size.\r
d0c64728 238 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
73850864 239\r
aa19fa57
LG
240 ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
241 # If TE section is not found, then PeiCore will search PE section.\r
242 # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
243 # This PCD is used to tune Pei phase performance to reduce the search image time.\r
244 # It can be set according to the generated image section type.\r
3076397e 245 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
73850864 246\r
fc9da5a6 247 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
c39c3e21
RN
248 # interrupt to access usb device in the case of absence of usb stack. \r
249 # DUET platform requires the token to be TRUE.\r
cc582cff 250 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
8a2d4996 251 \r
f02d0c0f
LG
252 ## If TRUE, HiiImageProtocol will be installed.\r
253 # FALSE is for size reduction.\r
813acf3a 254 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
73850864 255\r
a8e1ed54 256 ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
257 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
258 # from HII database.\r
813acf3a 259 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 260\r
73850864 261 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
f806dd27 262 # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
a90ccab8 263 # This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
f806dd27 264 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
73850864 265\r
a90ccab8 266 ## If TRUE, HelloWorld Application will print the verbose information.\r
223c22d8 267 # This PCD is a sample to explain FeatureFlag PCD usage.\r
223c22d8 268 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 269\r
a90ccab8 270 ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
85e923a5 271 # If FASLE, only FTW Write service is available.\r
72670d3e 272 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
273\r
a90ccab8 274 ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
72670d3e 275 # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
276 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 277\r
9060e3ec 278 ## This PCD specifies whether PciBus supports the hot plug device.\r
279 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
280\r
1ef26783 281 ## This PCD specifies whether the PCI bus driver probes non-standard, \r
282 # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
b3ec9b56 283 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
10c5d87e 284 ## This PCD specifies whether StatusCode is reported via Serial port.\r
285 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
286\r
287 ## This PCD specifies whether StatusCode is stored in memory.\r
288 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r
289 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
290\r
291 ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
292 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
9060e3ec 293\r
3dc8585e
JY
294 ## This PCD specified whether ACPI SDT protocol is installed.\r
295 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
296\r
aeeb84ba 297 ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
298 # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
299 # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
300 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
301 \r
5d2311be 302[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
73850864 303 ##\r
4e17cc90 304 # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
305 # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
306 # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
307 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
308 # is built in firmware.\r
309 #\r
310 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
311\r
a86ae184 312[PcdsFixedAtBuild]\r
1cedc893 313 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
314 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
315 # for a dynamic PCD used in PEI phase.\r
b3af5df6 316 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
9dddc0ff 317\r
1cedc893 318 ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
73850864 319 # to store PCD value.\r
1cedc893 320 #\r
b3af5df6 321 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
73850864 322\r
1cedc893 323 ## Maximum number of FV is supported by PeiCore's dispatching.\r
177aabe6 324 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
f02d0c0f 325\r
1cedc893 326 ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
177aabe6 327 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
f02d0c0f 328\r
1cedc893 329 ## Maximum stack size for PeiCore.\r
58dcdada 330 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
f02d0c0f 331\r
1cedc893 332 ## Maximum PPI count is supported by PeiCore's PPI database.\r
eaf539d0 333 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
73850864 334\r
2fcdca1d 335 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
a90ccab8
LG
336 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
337 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
338 # be reflushed through the manner of fault tolerant write.\r
b3af5df6 339 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
73850864 340\r
2fcdca1d 341 ## The maximum size of single common variable, that is non-HwErr type varible.\r
518d395c 342 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
73850864 343\r
2fcdca1d 344 ## The maximum size of single hardware error record variable.\r
345 # In IA32/X64 platforms, this value should be larger than 1KB.\r
346 # In IA64 platforms, this value should be larger than 128KB.\r
518d395c 347 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
73850864 348\r
48cd992a 349 ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r
350 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
351 # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
2fcdca1d 352 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
48cd992a 353 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
2fcdca1d 354\r
355 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
518d395c 356 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
2fcdca1d 357\r
358 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
359 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
360 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
361 # be reflushed through the manner of fault tolerant write.\r
b3af5df6 362 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
73850864 363\r
f02d0c0f 364 ## Size of the FTW working block range.\r
b3af5df6 365 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
3c506ddd 366\r
367 ## FFS filename to find the ACPI tables\r
368 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r
369\r
9060e3ec 370 ## Single root I/O virtualization virtual function memory BAR alignment\r
371 # BITN set indicates 2 of n+12 power\r
372 # BIT0 set indicates 4KB alignment\r
373 # BIT1 set indicates 8KB alignment\r
374 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
9f7d5b46 375 \r
54ea99a7 376 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
377 # -1: Enable the feature as fixed offset to TOLM\r
378 # 0: Disable the feature.\r
379 # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
380 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
381 \r
9f7d5b46 382 ## Smbios version\r
383 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055\r
9060e3ec 384\r
cfbc1a75 385 ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
386 # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
387 #\r
388 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
389\r
a86ae184 390[PcdsFixedAtBuild,PcdsPatchableInModule]\r
f02d0c0f 391 ## Maximun number of performance log entries during PEI phase.\r
348c8131 392 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 393\r
394 ## RTC Update Timeout Value\r
395 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
73850864 396\r
467d15ae 397 ## If TRUE, then 16550 serial port registers are in MMIO space. \r
398 # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r
399 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
400 \r
401 ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
402 # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
403 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
404\r
784ce127 405 ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
406 # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
407 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
408 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
409 \r
467d15ae 410 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
411 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
412\r
413 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
414 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
415\r
416 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r
417 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
418 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
419 # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
420 # BIT7..BIT6 - Reserved. Must be 0.\r
421 #\r
422 # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
423 #\r
424 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
425\r
426 ## FIFO Control Register (FCR) for the 16550 serial port. \r
427 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
428 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
429 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
430 # BIT7..BIT3 - Reserved. Must be 0.\r
431 #\r
432 # Default is to enable and clear all FIFOs.\r
433 #\r
434 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
435\r
6eea8eae
LG
436 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
437 # structure. The default value for this PCD is 0, which means that the DXE Core\r
438 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
439 # boundary as close to the top of memory as feasible. If this PCD is set to a \r
440 # value other than 0, then the DXE Core will first attempt to allocate the \r
441 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
442 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
443 # boundary as close to the top of memory as feasible.\r
444 #\r
445 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
446 \r
a86ae184 447[PcdsPatchableInModule,PcdsDynamic]\r
a90ccab8 448 ## This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
4bfa7dc4 449 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
73850864 450\r
a90ccab8 451 ## This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
4e17cc90 452 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
73850864 453\r
a86ae184 454[PcdsFixedAtBuild,PcdsDynamic]\r
73850864 455 ## Base address of the NV variable range in flash device\r
a86ae184 456 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
73850864 457\r
a86ae184 458 ## Base address of the FTW spare block range in flash device.\r
73850864 459 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
460\r
a86ae184 461 ## Base address of the FTW working block range in flash device.\r
73850864 462 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
463\r
92a4f6f3 464 ## 64-bit Base address of the NV variable range in flash device\r
465 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
466\r
467 ## 64-bit Base address of the FTW spare block range in flash device.\r
468 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
469\r
470 ## 64-bit Base address of the FTW working block range in flash device.\r
471 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
472\r
a90ccab8 473 ## This PCD defines the print string.\r
4e17cc90 474 # This PCD is a sample to explain String typed PCD usage.\r
73850864 475 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
476\r
02328a57 477 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r
478 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
479 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
480\r
099f2b18 481 ## This PCD specifies whether the Single Root I/O virtualization support.\r
482 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
483\r
484 ## This PCD specifies whether the Alternative Routing-ID support.\r
485 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
486\r
487 ## This PCD specifies whether the Multi Root I/O virtualization support.\r
488 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
489\r
4e17cc90 490[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
a90ccab8 491 ## This PCD defines the times to print hello world string.\r
4e17cc90 492 # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
4e17cc90 493 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 494\r
0ef42f88 495 ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
73850864 496 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
4e17cc90 497 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
73850864 498\r
0ef42f88 499 ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
500 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
4e17cc90 501 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 502\r
503 ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
e026f005 504 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
73850864 505\r
6144e7af 506 ## Firmware revision that is default value filled into the EFI System Table\r
507 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
508\r
509 ## Null-terminated Unicode string that described the firmware version\r
73850864 510 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
511\r
6144e7af 512 ## Null-terminated Unicode string that contains the date the formware was released\r
513 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
514\r
10c5d87e 515 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r
516 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r
517 # The default value in PeiPhase is 1 KBytes.\r
518 # The default value in DxePhase is 128 KBytes.\r
519 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
520\r
dad63934
RN
521 ## This PCD specifies whether to reset system when memory type information changes.\r
522 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
523\r
54ea99a7 524[PcdsPatchableInModule]\r
525 ## Specify memory size with page number for PEI code when \r
526 # the feature of Loading Module at Fixed Address is enabled\r
527 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
528 \r
529 ## Specify memory size with page number for DXE boot time code when \r
530 # the feature of Loading Module at Fixed Address is enabled\r
531 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
532 \r
533 ## Specify memory size with page number for DXE runtime code when \r
534 # the feature of Loading Module at Fixed Address is enabled\r
535 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
536 \r
537 ## Specify memory size with page number for SMM code when \r
538 # the feature of Loading Module at Fixed Address is enabled\r
539 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
540\r