]> git.proxmox.com Git - mirror_edk2.git/blame - MdeModulePkg/MdeModulePkg.dec
projects / mirror_edk2.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
MdeModulePkg: rename PropertiesTableEnable to PcdPropertiesTableEnable
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
e3e134eb 1## @file MdeModulePkg.dec\r
a9141950 2# This package provides the modules that conform to UEFI/PI Industry standards.\r
35c77dae 3# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
bf314e67 4# and libraries instances, which are used for those modules.\r
b7d286b6 5#\r
efb01a10 6# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>\r
64a80549 7# This program and the accompanying materials are licensed and made available under \r
8# the terms and conditions of the BSD License that accompanies this distribution. \r
4f57ff18 9# The full text of the license may be found at\r
64a80549 10# http://opensource.org/licenses/bsd-license.php. \r
11# \r
12# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
13# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
b7d286b6 14#\r
4f57ff18 15##\r
b7d286b6 16\r
17\r
b7d286b6 18[Defines]\r
19 DEC_SPECIFICATION = 0x00010005\r
84e20859 20 PACKAGE_NAME = MdeModulePkg\r
fe44bae5 21 PACKAGE_UNI_FILE = MdeModulePkg.uni\r
b7d286b6 22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
cd68e4a8 23 PACKAGE_VERSION = 0.96\r
b7d286b6 24\r
6bfbb5f0 25[Includes]\r
ed838d0c 26 Include\r
b7d286b6 27\r
30143b15 28\r
6bfbb5f0 29[LibraryClasses]\r
4f57ff18 30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 31 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 32 IpIoLib|Include/Library/IpIoLib.h\r
73850864 33\r
4f57ff18 34 ## @libraryclass Basic function for UEFI network stack.\r
93367605 35 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 36 NetLib|Include/Library/NetLib.h\r
73850864 37\r
4f57ff18 38 ## @libraryclass The helper routines to access UDP service.\r
93367605 39 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 40 UdpIoLib|Include/Library/UdpIoLib.h\r
73850864 41\r
4bad9ada 42 ## @libraryclass The helper routines to access TCP service.\r
43 # This library is only intended to be used by UEFI network stack modules.\r
44 TcpIoLib|Include/Library/TcpIoLib.h\r
45\r
97b2c9b5
LG		 46 ## @libraryclass Defines a set of methods to reset whole system.\r
47 ResetSystemLib|Include/Library/ResetSystemLib.h\r
48\r
4f57ff18 49 ## @libraryclass Defines a set of methods related do S3 mode.\r
05d71050 50 # This library class is no longer used and modules using this library should\r
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
4fb31c2c 52 S3Lib|Include/Library/S3Lib.h\r
73850864 53\r
4f57ff18 54 ## @libraryclass Defines a set of methods related recovery mode.\r
05d71050 55 # This library class is no longer used and modules using this library should\r
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
4fb31c2c 57 RecoveryLib|Include/Library/RecoveryLib.h\r
73850864 58\r
804dbc37 59 ## @libraryclass Provides HII related functions.\r
60 HiiLib|Include/Library/HiiLib.h\r
73850864 61\r
4f57ff18 62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 63 CapsuleLib|Include/Library/CapsuleLib.h\r
73850864 64\r
4f57ff18 65 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG		 66 DpcLib|Include/Library/DpcLib.h\r
67\r
73850864 68 ## @libraryclass Provides global variables that are pointers\r
a90ccab8
LG		 69 # to the UEFI HII related protocols.\r
70 #\r
da801a6e 71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 72\r
cd98f305
LG		 73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
74 #\r
975e8815 75 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
cd98f305 76\r
75dea6bd 77 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
78 #\r
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
80\r
fe92ab29 81 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
82 #\r
83 DebugAgentLib|Include/Library/DebugAgentLib.h\r
6eea8eae 84\r
467d15ae 85 ## @libraryclass Provide platform specific hooks.\r
86 #\r
87 PlatformHookLib|Include/Library/PlatformHookLib.h\r
495797c5 88\r
89 ## @libraryclass Provide platform specific hooks for SMM core.\r
90 #\r
91 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
32e85209
JY		 92\r
93 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
94 #\r
95 LockBoxLib|Include/Library/LockBoxLib.h\r
467d15ae 96 \r
1e172d6b 97 ## @libraryclass Provide the CPU exception handler.\r
98 #\r
99 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
100 \r
7c6c064c
ED		 101 ## @libraryclass Provides platform specific display interface.\r
102 #\r
103 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
104\r
ae591c14
DM		 105 ## @libraryclass Provides sorting functions\r
106 SortLib|Include/Library/SortLib.h\r
107\r
1d112229
RN		 108 ## @libraryclass Provides core boot manager functions\r
109 UefiBootManagerLib|Include/Library/UefiBootManagerLib.h\r
110\r
f4cd24da
RN		 111 ## @libraryclass Provides core boot manager functions\r
112 PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
113\r
308521b1
SZ		 114 ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
115 #\r
116 TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
117\r
b6477d82
SZ		 118 ## @libraryclass Provides authenticated variable services.\r
119 #\r
120 AuthVaribleLib|Include/Library/AuthVaribleLib.h\r
121\r
6bfbb5f0 122[Guids]\r
f02d0c0f 123 ## MdeModule package token space guid\r
a90ccab8 124 # Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 125 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 126\r
f02d0c0f 127 ## Hob guid for Pcd DataBase\r
a90ccab8 128 # Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 129 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
73850864 130\r
419db80b
BF		 131 ## Guid for PCD DataBase signature.\r
132 # Include/Guid/PcdDataBaseSignatureGuid.h\r
133 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
134\r
5c526736 135 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 136 # Include/Guid/MdeModuleHii.h\r
5c526736 137 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
73850864 138\r
5c526736 139 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 140 # Include/Guid/MdeModuleHii.h\r
5c526736 141 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
73850864 142\r
f02d0c0f 143 ## Guid to specify the System Non Volatile FV\r
a90ccab8 144 # Include/Guid/SystemNvDataGuid.h\r
351986ae 145 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
73850864 146\r
3e02ebb2
SZ		 147 ## GUID used as the signature of FTW working block header.\r
148 # Include/Guid/SystemNvDataGuid.h\r
149 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
150\r
151 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
152 # Include/Guid/FaultTolerantWrite.h\r
153 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
154\r
f02d0c0f 155 ## Guid specify the device is the console out device.\r
a90ccab8 156 # Include/Guid/ConsoleOutDevice.h\r
351986ae 157 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG		 158\r
159 ## Guid specify the device is the console in device.\r
a90ccab8 160 # Include/Guid/ConsoleInDevice.h\r
351986ae 161 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 162\r
f02d0c0f 163 ## Hob and Variable guid specify the platform memory type information.\r
a90ccab8 164 # Include/Guid/MemoryTypeInformation.h\r
351986ae 165 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
73850864 166\r
f02d0c0f 167 ## Capsule update hob and variable guid\r
a90ccab8 168 # Include/Guid/CapsuleVendor.h\r
351986ae 169 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
73850864 170\r
f02d0c0f 171 ## Guid specifiy the device is the StdErr device.\r
a90ccab8 172 # Include/Guid/StandardErrorDevice.h\r
88f20127 173 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 174\r
3709c4cd 175 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
a90ccab8 176 # Include/Guid/VariableFormat.h\r
3709c4cd 177 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
73850864 178\r
1fe6c125
SZ		 179 ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
180 # Include/Guid/AuthenticatedVariableFormat.h\r
181 gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
182\r
9725730b 183 # Include/Guid/VariableIndexTable.h\r
184 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
185\r
d00ed85e 186 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
187 # Include/Guid/SmmVariableCommon.h\r
188 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
189 \r
2db4a77e 190 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
a90ccab8 191 # Include/Guid/Performance.h\r
f0da4d7d
SZ		 192 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
193 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
194 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
195 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
1df7a023 196\r
76f1dde2 197 ## Guid is defined for CRC32 encapsulation scheme.\r
a90ccab8 198 # Include/Guid/Crc32GuidedSectionExtraction.h\r
76f1dde2
LG		 199 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
200\r
63886849 201 ## Include/Guid/NicIp4ConfigNvData.h\r
202 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
25126a05 203\r
204 ## Include/Guid/StatusCodeCallbackGuid.h\r
205 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
63886849 206\r
10c5d87e 207 ## GUID identifies status code records HOB that originate from the PEI status code\r
208 # Include/Guid/MemoryStatusCodeRecord.h\r
209 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
210\r
211 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
212 # Include/Guid/StatusCodeDataTypeDebug.h\r
213 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
214\r
54ea99a7 215 ## A configuration Table Guid for Load module at fixed address \r
216 # Include/Guid/LoadModuleAtFixedAddress.h\r
217 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
218\r
62a5bf63 219 ## GUID used to store the global debug mask value into an EFI Variable\r
220 # Include/Guid/DebugMask.h \r
221 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
222 \r
54cd17e9 223 ## Event for the DXE Core to signal idle events\r
224 # Include/Guid/EventIdle.h\r
225 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
226\r
30c00a1c 227 ## Include/Guid/RecoveryDevice.h\r
228 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
229\r
230 ## Include/Guid/RecoveryDevice.h\r
231 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
232\r
233 ## Include/Guid/RecoveryDevice.h\r
234 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
235\r
236 ## Include/Guid/RecoveryDevice.h\r
237 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
238\r
1c837cd5 239 ## Include/Guid/SmmLockBox.h\r
044824d9 240 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
1c837cd5 241\r
1261fe23 242 ## Include/Guid/AcpiS3Context.h\r
243 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
244\r
245 ## Include/Guid/AcpiS3Context.h\r
246 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
247\r
be46cd5f 248 ## Include/Guid/BootScriptExecutorVariable.h\r
249 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
250 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
251\r
c8ad2d7a
LG		 252 ## Include/Guid/UsbKeyBoardLayout.h\r
253 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
254 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
255 \r
256 ## Include/Guid/HiiResourceSampleHii.h\r
257 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
258\r
259 ## Include/Guid/DriverSampleHii.h\r
260 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
261 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
c8ad2d7a
LG		 262 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
263\r
264 ## Include/Guid/PlatDriOverrideHii.h\r
265 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
266\r
267 ## Include/Guid/Ip4ConfigHii.h\r
268 gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
269\r
270 ## Include/Guid/VlanConfigHii.h\r
271 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
272\r
273 ## Include/Guid/Ip4IScsiConfigHii.h\r
274 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
275 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
276\r
277 ## Include/Guid/ZeroGuid.h\r
278 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
279 \r
280 ## Include/Guid/MtcVendor.h\r
281 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
282\r
0284e90c
LG		 283 ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
284 # Include/Guid/FirmwarePerformance.h\r
044824d9 285 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
db91c620 286 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
044824d9 287\r
288 ## Include/Guid/ExitBootServiceFailed.h\r
289 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
0284e90c 290\r
f58f3de0 291 ## Include/Guid/ConnectConInEvent.h\r
292 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
293\r
69fc8f08
RN		 294 ## Include/Guid/StatusCodeDataTypeVariable.h\r
295 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
84edd20b
SZ		 296 \r
297 ## Include/Guid/MemoryProfile.h\r
298 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
69fc8f08 299\r
4edb1866
SZ		 300 ## Include/Protocol/VarErrorFlag.h\r
301 gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
302\r
a7adc5c5
LG		 303 ## GUID indicates the LZMA custom compress/decompress algorithm.\r
304 # Include/Guid/LzmaDecompress.h\r
305 gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
306 gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
307\r
4b1bf81c 308[Ppis]\r
ea060cfa 309 ## Include/Ppi/AtaController.h\r
310 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
311\r
4b1bf81c 312 ## Include/Ppi/UsbHostController.h\r
313 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
314\r
315 ## Include/Ppi/Usb2HostController.h\r
316 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
317\r
318 ## Include/Ppi/UsbController.h\r
319 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
320\r
321 ## Include/Ppi/UsbIo.h\r
322 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
323\r
ce2f13a3 324 ## Include/Ppi/SecPerformance.h\r
325 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
326\r
9fba8e7d 327 ## Include/Ppi/SmmCommunication.h\r
328 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
329\r
e7b7db36 330 ## Include/Ppi/SmmAccess.h\r
331 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
332\r
3e4df77f 333 ## Include/Ppi/SmmControl.h\r
334 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
335\r
78df32f2 336 ## Include/Ppi/PostBootScriptTable.h\r
337 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
338\r
883e23d0
LG		 339 ## Include/Ppi/SerialPortPei.h\r
340 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
341\r
0591696e
FT		 342 ## Include/Ppi/UfsHostController.h\r
343 gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
344\r
6bfbb5f0 345[Protocols]\r
023c0fec 346 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
a90ccab8
LG		 347 # Include/Protocol/LoadPe32Image.h\r
348 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
349 # If developer need implement such functionality, they should use BasePeCoffLib.\r
023c0fec 350 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
73850864 351\r
504dcb0a 352 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
a90ccab8 353 # Include/Protocol/Print2.h\r
504dcb0a 354 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
2dd4c603 355\r
346cf9ac 356 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
a90ccab8 357 # Include/Protocol/GenericMemoryTest.h\r
351986ae 358 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
73850864 359\r
55e4e173 360 ## Include/Protocol/Dpc.h\r
36ee91ca 361 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
73850864 362\r
85e923a5
LG		 363 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
364 # Include/Protocol/FaultTolerantWrite.h\r
365 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
73850864 366\r
8a2d4996 367 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
368 # Include/Protocol/SmmFaultTolerantWrite.h\r
369 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
370 \r
85e923a5
LG		 371 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
372 # Include/Protocol/SwapAddressRange.h\r
373 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
8a2d4996 374 \r
375 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
376 # Include/Protocol/SmmSwapAddressRange.h\r
377 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
378 \r
379 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
380 # Include/Protocol/SmmVariableProtocol.h\r
381 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
382\r
ff843847
RN		 383 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
384 # Include/Protocol/VariableLock.h\r
385 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
386\r
efb01a10
SZ		 387 ## Include/Protocol/VarCheck.h\r
388 gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }\r
389\r
390 ## Include/Protocol/SmmVarCheck.h\r
391 gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }\r
392\r
8a2d4996 393 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
394 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
395 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
73850864 396\r
62a5bf63 397 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
398 # Include/Guid/DebugMask.h \r
399 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
1c837cd5 400\r
401 ## Include/Protocol/LockBox.h\r
402 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
0a48ffb0
LG		 403 \r
404 ## Include/Protocol/FormBrowserEx.h\r
48a9d5f7
LG		 405 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
406\r
c8ad2d7a
LG		 407 ## Include/Protocol/EbcVmTest.h\r
408 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
409\r
410 ## Include/Protocol/EbcSimpleDebugger.h\r
411 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
e2988e66 412\r
413 ## Include/Protocol/BootLogo.h\r
414 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
415\r
7c6c064c
ED		 416 ## Include/Protocol/DisplayProtocol.h\r
417 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
418\r
419 ## Include/Protocol/FormBrowserEx2.h\r
420 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
421\r
0591696e
FT		 422 ## Include/Protocol/UfsHostController.h\r
423 gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
8d51e87d
CZ		 424 \r
425 ## Include/Protocol/EsrtManagement.h\r
426 gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
0591696e 427\r
53ec4d7f
SZ		 428 ## Include/Protocol/SmmExitBootServices.h\r
429 gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
430\r
431 ## Include/Protocol/SmmLegacyBoot.h\r
432 gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
433\r
434 ## Include/Protocol/SmmReadyToBoot.h\r
435 gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
436\r
fe44bae5
SZ		 437#\r
438# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
439# 0x80000001 | Invalid value provided.\r
440# 0x80000002 | Reserved bits must be set to zero.\r
441# 0x80000003 | Incorrect progress code provided.\r
442# 0x80000004 | Invalid foreground color specified.\r
443# 0x80000005 | Invalid background color specified.\r
444# 0x80000006 | Incorrect error code provided.\r
445#\r
446\r
a86ae184 447[PcdsFeatureFlag]\r
fe44bae5
SZ		 448 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r
449 # TRUE - Supports update capsule across a system reset.<BR>\r
450 # FALSE - Does not support update capsule across a system reset.<BR>\r
451 # @Prompt Enable update capsule across a system reset.\r
109e9a61 452 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
73850864 453\r
fe44bae5
SZ		 454 ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r
455 # TRUE - All PCD PPI services will be produced.<BR>\r
456 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r
457 # @Prompt Enable full PEI PCD services.\r
f806dd27
LG		 458 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
459\r
fe44bae5
SZ		 460 ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r
461 # It can be disabled to save size.<BR><BR>\r
462 # TRUE - Device Path To Text Protocol will be produced.<BR>\r
463 # FALSE - Device Path To Text Protocol will not be produced.<BR>\r
464 # @Prompt Enable Device Path to Text support.\r
348c8131 465 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
73850864 466\r
fe44bae5
SZ		 467 ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r
468 # It can be disabled to save size.<BR><BR>\r
469 # TRUE - Device Path From Text Protocol will be produced.<BR>\r
470 # FALSE - Device Path From Text Protocol will not be produced.<BR>\r
471 # @Prompt Enable Device Path From Text support.\r
348c8131 472 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
73850864 473\r
fe44bae5 474 ## Indicates if the statistics about variable usage will be collected. This information is\r
fc9da5a6 475 # stored as a vendor configuration table into the EFI system table.\r
fe44bae5
SZ		 476 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
477 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r
478 # TRUE - Statistics about variable usage will be collected.<BR>\r
479 # FALSE - Statistics about variable usage will not be collected.<BR>\r
480 # @Prompt Enable variable statistics collection.\r
33a5a666 481 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
73850864 482\r
fe44bae5
SZ		 483 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r
484 # TRUE - Installs Unicode Collation Protocol.<BR>\r
485 # FALSE - Does not install Unicode Collation Protocol.<BR>\r
486 # @Prompt Enable Unicode Collation support.\r
ac12a167 487 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
73850864 488\r
fe44bae5
SZ		 489 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r
490 # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r
491 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r
492 # @Prompt Enable Unicode Collation 2 support.\r
ac12a167 493 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
73850864 494\r
fe44bae5
SZ		 495 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
496 # It could be set FALSE to save size.<BR><BR>\r
497 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
498 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
499 # @Prompt Enable ConOut GOP support.\r
d0c64728 500 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
73850864 501\r
fe44bae5
SZ		 502 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
503 # It could be set FALSE to save size.<BR><BR>\r
504 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
505 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
506 # @Prompt Enable ConOut UGA support.\r
d0c64728 507 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
73850864 508\r
fe44bae5
SZ		 509 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r
510 # This PCD is used to tune PEI phase performance to reduce the search image time.\r
511 # It can be set according to the generated image section type.<BR><BR>\r
512 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r
513 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r
514 # @Prompt PeiCore search TE section first.\r
3076397e 515 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
73850864 516\r
fe44bae5
SZ		 517 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
518 # interrupt to access usb device in the case of absence of usb stack.\r
519 # DUET platform requires the token to be TRUE.<BR><BR>\r
520 # TRUE - Turn off usb legacy support.<BR>\r
521 # FALSE - Does not turn off usb legacy support.<BR>\r
35c77dae 522 # @Prompt Turn off USB legacy support.\r
cc582cff 523 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
8a2d4996 524 \r
fe44bae5
SZ		 525 ## Indicates if HiiImageProtocol will be installed.\r
526 # FALSE is for size reduction.<BR><BR>\r
527 # TRUE - Installs HiiImageProtocol.<BR>\r
528 # FALSE - Does not install HiiImageProtocol.<BR>\r
529 # @Prompt Enable HII image support.\r
813acf3a 530 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
73850864 531\r
fe44bae5 532 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r
a8e1ed54 533 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
fe44bae5
SZ		 534 # from HII database.<BR><BR>\r
535 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r
536 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r
537 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
813acf3a 538 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 539\r
fe44bae5
SZ		 540 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
541 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
542 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
543 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
544 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
545 # @Prompt Enable framework backward compatibility support.\r
f806dd27 546 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
73850864 547\r
fe44bae5
SZ		 548 ## Indicates if HelloWorld Application will print the verbose information.\r
549 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
550 # TRUE - HelloWorld Application will print the verbose information.<BR>\r
551 # FALSE - HelloWorld Application will not print the verbose information.<BR>\r
552 # @Prompt Enable HelloWorld print.\r
223c22d8 553 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 554\r
fe44bae5
SZ		 555 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r
556 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r
557 # FALSE - Only FTW Write service is available.<BR>\r
558 # @Prompt Enable FULL FTW services.\r
72670d3e 559 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
560\r
fe44bae5
SZ		 561 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r
562 # TRUE - DXE IPL will support UEFI decompression.<BR>\r
563 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r
564 # @Prompt Enable UEFI decompression support in DXE IPL.\r
72670d3e 565 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 566\r
fe44bae5
SZ		 567 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r
568 # TRUE - PciBus driver supports the hot plug device.<BR>\r
569 # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r
570 # @Prompt Enable PciBus hot plug device support.\r
9060e3ec 571 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
572\r
fe44bae5
SZ		 573 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r
574 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
575 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
576 # @Prompt Enable PCI bridge IO alignment probe.\r
b3ec9b56 577 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
fe44bae5
SZ		 578\r
579 ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r
580 # TRUE - Reports StatusCode via Serial port.<BR>\r
581 # FALSE - Does not report StatusCode via Serial port.<BR>\r
582 # @Prompt Enable StatusCode via Serial port.\r
10c5d87e 583 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
584\r
fe44bae5
SZ		 585 ## Indicates if StatusCode is stored in memory.\r
586 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r
587 # TRUE - Stores StatusCode in memory.<BR>\r
588 # FALSE - Does not store StatusCode in memory.<BR>\r
589 # @Prompt Enable StatusCode via memory.\r
10c5d87e 590 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
591\r
fe44bae5
SZ		 592 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r
593 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r
594 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r
595 # @Prompt Enable PEI StatusCode replay in DXE phase\r
10c5d87e 596 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
9060e3ec 597\r
fe44bae5
SZ		 598 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r
599 # TRUE - Installs ACPI SDT protocol.<BR>\r
600 # FALSE - Does not install ACPI SDT protocol.<BR>\r
601 # @Prompt Enable ACPI SDT support.\r
3dc8585e
JY		 602 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
603\r
fe44bae5
SZ		 604 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
605 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r
606 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
607 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
608 # @Prompt Enable unaligned PCI I/O support.\r
aeeb84ba 609 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
11232773 610\r
fe44bae5
SZ		 611 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r
612 # TRUE - TEXT statement will always be set to GrayOut.<BR>\r
613 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r
614 # @Prompt Always GrayOut TEXT statement.\r
11232773 615 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
fe44bae5
SZ		 616\r
617 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r
618 # TRUE - The unselectable menu will be set to GrayOut.<BR>\r
619 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r
620 # @Prompt GrayOut read only menu.\r
0777cea6
ED		 621 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
622\r
fe44bae5
SZ		 623 ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r
624 # TRUE - Supports recovery from IDE disk.<BR>\r
625 # FALSE - Does not support recovery from IDE disk.<BR>\r
626 # @Prompt Enable recovery on IDE disk.\r
74ef1d42 627 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
628\r
fe44bae5
SZ		 629 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r
630 # TRUE - Supports recovery from FAT floppy disk.<BR>\r
631 # FALSE - Does not support recovery from FAT floppy disk.<BR>\r
632 # @Prompt Enable recovery on FAT floppy disk.\r
74ef1d42 633 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
634\r
fe44bae5
SZ		 635 ## Indicates if recovery from data CD will be supported.<BR><BR>\r
636 # TRUE - Supports recovery from data CD.<BR>\r
637 # FALSE - Does not support recovery from data CD.<BR>\r
638 # @Prompt Enable recovery on data CD.\r
74ef1d42 639 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
640\r
fe44bae5
SZ		 641 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r
642 # TRUE - Supports recovery from USB disk.<BR>\r
643 # FALSE - Does not support recovery from USB disk.<BR>\r
644 # @Prompt Enable recovery on FAT USB disk.\r
74ef1d42 645 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
646\r
fe44bae5
SZ		 647 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r
648 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r
649 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r
650 # @Prompt Enable S3 performance data support.\r
0284e90c
LG		 651 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
652\r
5d2311be 653[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
fe44bae5
SZ		 654 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
655 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
656 # is built in firmware.<BR><BR>\r
657 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r
658 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r
659 # @Prompt DxeIpl switch to long mode.\r
4e17cc90 660 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
661\r
fe44bae5
SZ		 662 ## Indicates if DxeIpl should rebuild page tables. This flag only\r
663 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r
664 # TRUE - DxeIpl will rebuild page tables.<BR>\r
665 # FALSE - DxeIpl will not rebuild page tables.<BR>\r
666 # @Prompt DxeIpl rebuild page tables.\r
e47f0da4 667 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
668\r
a86ae184 669[PcdsFixedAtBuild]\r
fe44bae5
SZ		 670 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r
671 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r
672 # 0: Disable the feature.<BR>\r
673 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r
674 # @Prompt Enable LMFA feature.\r
675 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r
54ea99a7 676 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
d13e7bda 677\r
fe44bae5
SZ		 678 ## Progress Code for OS Loader LoadImage start.<BR><BR>\r
679 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r
680 # @Prompt Progress Code for OS Loader LoadImage start.\r
681 # @ValidList 0x80000003 | 0x03058000\r
eab90a61 682 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
683\r
fe44bae5
SZ		 684 ## Progress Code for OS Loader StartImage start.<BR><BR>\r
685 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r
686 # @Prompt Progress Code for OS Loader StartImage start.\r
687 # @ValidList 0x80000003 | 0x03058001\r
eab90a61 688 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
689\r
fe44bae5
SZ		 690 ## Progress Code for S3 Suspend start.<BR><BR>\r
691 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r
692 # @Prompt Progress Code for S3 Suspend start.\r
693 # @ValidList 0x80000003 | 0x03078000\r
eab90a61 694 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
695\r
fe44bae5
SZ		 696 ## Progress Code for S3 Suspend end.<BR><BR>\r
697 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r
698 # @Prompt Progress Code for S3 Suspend end.\r
699 # @ValidList 0x80000003 | 0x03078001\r
eab90a61 700 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
701\r
fe44bae5
SZ		 702 ## Error Code for SetVariable failure.<BR><BR>\r
703 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r
704 # @Prompt Error Code for SetVariable failure.\r
705 # @ValidList 0x80000006 | 0x03058002\r
69fc8f08
RN		 706 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
707\r
fe44bae5
SZ		 708[PcdsFixedAtBuild, PcdsPatchableInModule]\r
709 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
710 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
711 # for a dynamic PCD used in PEI phase.\r
712 # @Prompt Max PEI PCD callback number per PCD entry.\r
713 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
714\r
35c77dae 715 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r
adcd7381 716 # to store PCD value.\r
fe44bae5 717 # @Prompt VPD base address.\r
adcd7381
SZ		 718 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
719\r
fe781940
SZ		 720 ## Maximum number of FV is supported by PeiCore's dispatching.\r
721 # @Prompt Maximum number of FV supported by PeiCore.\r
722 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
723\r
724 ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
725 # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
726 # @Prompt Maximum File count per FV supported by PeiCore.\r
727 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
728\r
fe44bae5
SZ		 729 ## Maximum stack size for PeiCore.\r
730 # @Prompt Maximum stack size for PeiCore.\r
731 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
732\r
fe781940
SZ		 733 ## Maximum PPI count is supported by PeiCore's PPI database.\r
734 # @Prompt Maximum PPI count supported by PeiCore.\r
735 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
736\r
fe44bae5
SZ		 737 ## The maximum size of a single non-HwErr type variable.\r
738 # @Prompt Maximum variable size.\r
739 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
740\r
8457d0e7
SZ		 741 ## The maximum size of a single authenticated variable.\r
742 # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
743 # @Prompt Maximum authenticated variable size.\r
744 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
745\r
fe44bae5
SZ		 746 ## The maximum size of single hardware error record variable.<BR><BR>\r
747 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
748 # In IA64 platforms, this value should be larger than 128KB.<BR>\r
749 # @Prompt Maximum HwErr variable size.\r
750 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
751\r
4edb1866 752 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
fe44bae5 753 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
4edb1866 754 # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
fe44bae5
SZ		 755 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
756 # @Prompt HwErr variable storage size.\r
757 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
758\r
4edb1866
SZ		 759 ## The size of maximum user NV variable space.<BR><BR>\r
760 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
761 # If the value is 0, it means user variable share the same NV storage with system variable,\r
762 # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>\r
7cff4456 763 # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,\r
4edb1866
SZ		 764 # otherwise the variable will be regarded as user variable.<BR>\r
765 # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>\r
766 # 2) Variables managed by Variable driver internally.<BR>\r
767 # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>\r
7cff4456 768 # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>\r
4edb1866
SZ		 769 # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>\r
770 # @Prompt Maximum user NV variable space size.\r
771 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009\r
772\r
773 ## The size of NV variable space reserved at UEFI boottime.<BR><BR>\r
774 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
775 # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.\r
776 # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>\r
777 # Then the common NV variable space size at boottime will be\r
778 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>\r
779 # and the common NV variable space size at runtime will be\r
780 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>\r
781 # @Prompt Boottime reserved NV variable space size.\r
782 gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007\r
783\r
0fb5e515
SZ		 784 ## Reclaim variable space at EndOfDxe.<BR><BR>\r
785 # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>\r
786 # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>\r
787 # @Prompt Reclaim variable space at EndOfDxe.\r
788 gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008\r
789\r
fe44bae5
SZ		 790 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r
791 # @Prompt Variable storage size.\r
792 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
793\r
794 ## FFS filename to find the ACPI tables.\r
795 # @Prompt FFS name of ACPI tables storage.\r
796 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
797\r
798 ## FFS filename to find the capsule coalesce image.\r
799 # @Prompt FFS name of capsule coalesce image.\r
800 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
801\r
35c77dae
LG		 802 ## Maximum number of performance log entries during PEI phase.\r
803 # @Prompt Maximum number of PEI performance log entries.\r
348c8131 804 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 805\r
fe44bae5
SZ		 806 ## RTC Update Timeout Value(microsecond).\r
807 # @Prompt RTC Update Timeout Value.\r
4e17cc90 808 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
73850864 809\r
fe44bae5
SZ		 810 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r
811 # TRUE - 16550 serial port registers are in MMIO space.<BR>\r
812 # FALSE - 16550 serial port registers are in I/O space.<BR>\r
813 # @Prompt Serial port registers use MMIO.\r
467d15ae 814 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
fe44bae5
SZ		 815\r
816 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
817 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
818 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
819 # @Prompt Enable serial port hardware flow control.\r
467d15ae 820 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
821\r
fe44bae5
SZ		 822 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r
823 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r
824 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r
825 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
826 # @Prompt Enable serial port cable detetion.\r
784ce127 827 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
828 \r
fe44bae5
SZ		 829 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
830 # @Prompt Base address of serial port registers.\r
467d15ae 831 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
832\r
833 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
fe44bae5
SZ		 834 # @Prompt Baud rate for serial port.\r
835 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r
467d15ae 836 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
837\r
fe44bae5
SZ		 838 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r
839 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r
840 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r
841 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r
842 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 843 #\r
fe44bae5
SZ		 844 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r
845 # @Prompt Serial port Line Control settings.\r
846 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r
467d15ae 847 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
848\r
fe44bae5
SZ		 849 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r
850 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r
851 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r
852 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r
853 # BIT4..BIT3 - Reserved. Must be 0.<BR>\r
854 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r
855 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
467d15ae 856 #\r
fe44bae5
SZ		 857 # Default is to enable and clear all FIFOs.<BR>\r
858 # @Prompt Serial port FIFO Control settings.\r
859 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
467d15ae 860 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
861\r
3ddcceea 862 ## This setting can override the default TFTP block size. A value of 0 computes\r
863 # the default from MTU information. A non-zero value will be used as block size\r
864 # in bytes.\r
fe44bae5
SZ		 865 # @Prompt TFTP block size.\r
866 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
867\r
6eea8eae 868 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
fe44bae5 869 # structure. The default value for this PCD is 0, which means that the DXE Core\r
6eea8eae
LG		 870 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
871 # boundary as close to the top of memory as feasible. If this PCD is set to a \r
fe44bae5 872 # value other than 0, then the DXE Core will first attempt to allocate the\r
6eea8eae
LG		 873 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
874 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
875 # boundary as close to the top of memory as feasible.\r
fe44bae5 876 # @Prompt Maximum Efi System Table Pointer address.\r
6eea8eae 877 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
838a9c58 878\r
fe44bae5
SZ		 879 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
880 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
881 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
882 # @Prompt Shadow Peim On S3 Boot. \r
5d7f3126
LG		 883 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
884\r
84edd20b
SZ		 885 ## The mask is used to control memory profile behavior.<BR><BR>\r
886 # BIT0 - Enable UEFI memory profile.<BR>\r
887 # BIT1 - Enable SMRAM profile.<BR>\r
888 # @Prompt Memory Profile Property.\r
889 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
890 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
891\r
892 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
893 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
894 #\r
895 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
896 # EfiReservedMemoryType 0x0001<BR>\r
897 # EfiLoaderCode 0x0002<BR>\r
898 # EfiLoaderData 0x0004<BR>\r
899 # EfiBootServicesCode 0x0008<BR>\r
900 # EfiBootServicesData 0x0010<BR>\r
901 # EfiRuntimeServicesCode 0x0020<BR>\r
902 # EfiRuntimeServicesData 0x0040<BR>\r
903 # EfiConventionalMemory 0x0080<BR>\r
904 # EfiUnusableMemory 0x0100<BR>\r
905 # EfiACPIReclaimMemory 0x0200<BR>\r
906 # EfiACPIMemoryNVS 0x0400<BR>\r
907 # EfiMemoryMappedIO 0x0800<BR>\r
908 # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
909 # EfiPalCode 0x2000<BR>\r
8f2f2f19 910 # EfiPersistentMemory 0x4000<BR>\r
db9b00f1 911 # OEM Reserved 0x4000000000000000<BR>\r
84edd20b
SZ		 912 # OS Reserved 0x8000000000000000<BR>\r
913 #\r
914 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
915 #\r
916 # @Prompt Memory profile memory type.\r
917 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
918\r
31122d8c
LG		 919 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
920 # information that describes the path that contains zero or more PCI to PCI briges \r
921 # followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
922 # first byte is the PCI Device Number, then second byte is the PCI Function Number, \r
923 # and the last two bytes are the offset to the PCI power management capabilities \r
924 # register used to manage the D0-D3 states. If a PCI power management capabilities \r
925 # register is not present, then the last two bytes in the offset is set to 0. The \r
926 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a \r
927 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
928 # @Prompt Pci Serial Device Info\r
929 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
930\r
931 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
35c77dae 932 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
31122d8c 933 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
8d51e87d 934 \r
1d112229
RN		 935 ## This PCD points to the file name GUID of the BootManagerMenuApp\r
936 # Platform can customize the PCD to point to different application for Boot Manager Menu\r
937 gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
938\r
939 ## This PCD points to the formset GUID of the driver health management form\r
940 # The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
941 # Platform can customize the PCD to point to different formset.\r
942 gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
943\r
cd68e4a8
MK		 944 ## The number of bytes between registers in serial device. The default is 1 byte.\r
945 # @Prompt Serial Port Register Stride in Bytes\r
1eb904a6 946 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
cd68e4a8 947 \r
be046357 948[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
fe44bae5
SZ		 949 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
950 # This PCD could be set to 0 then console output would be at max column and max row.\r
951 # @Prompt Console output row.\r
4bfa7dc4 952 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
73850864 953\r
fe44bae5
SZ		 954 ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.\r
955 # This PCD could be set to 0 then console output would be at max column and max row.\r
956 # @Prompt Console output column.\r
4e17cc90 957 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
73850864 958\r
b9b5e307 959 ## This PCD defines the video horizontal resolution.\r
fe44bae5
SZ		 960 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
961 # @Prompt Video horizontal resolution.\r
b9b5e307 962 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
963\r
964 ## This PCD defines the video vertical resolution.\r
fe44bae5
SZ		 965 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
966 # @Prompt Video vertical resolution.\r
b9b5e307 967 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
968\r
4e5c0d12
RN		 969 # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r
970 # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r
971 # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r
972 # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r
973 # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r
974 # for text setup.\r
975\r
976 ## Specify the video horizontal resolution of text setup.\r
977 # @Prompt Video Horizontal Resolution of Text Setup\r
978 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r
979\r
980 ## Specify the video vertical resolution of text setup.\r
981 # @Prompt Video Vertical Resolution of Text Setup\r
982 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r
983\r
984 ## Specify the console output column of text setup.\r
985 # @Prompt Console Output Column of Text Setup\r
986 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r
987\r
988 ## Specify the console output row of text setup.\r
989 # @Prompt Console Output Row of Text Setup\r
990 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
991\r
fe44bae5 992[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
b2a41b1e
RN		 993 ## UART clock frequency is for the baud rate configuration.\r
994 # @Prompt Serial Port Clock Rate.\r
995 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
996\r
5e30b69e
DB		 997 ## This PCD points to the front page formset GUID\r
998 # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
999 gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
1000\r
fe44bae5
SZ		 1001 ## Base address of the NV variable range in flash device.\r
1002 # @Prompt Base address of flash NV variable range.\r
a86ae184 1003 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
73850864 1004\r
fe44bae5
SZ		 1005 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r
1006 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1007 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1008 # be reflushed through the manner of fault tolerant write.\r
1009 # @Prompt Size of flash NV variable range.\r
1010 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
1011\r
2c4b18e0 1012 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 1013 # @Prompt Base address of flash FTW spare block range.\r
73850864 1014 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
1015\r
fe44bae5
SZ		 1016 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
1017 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1018 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1019 # be reflushed through the manner of fault tolerant write.\r
1020 # @Prompt Size of flash FTW spare block range.\r
1021 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
1022\r
a86ae184 1023 ## Base address of the FTW working block range in flash device.\r
0d3edd9d 1024 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 1025 # @Prompt Base address of flash FTW working block range.\r
73850864 1026 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
1027\r
fe44bae5 1028 ## Size of the FTW working block range.\r
0d3edd9d
SZ		 1029 # If the value is less than one block size, the work space range should not span blocks.\r
1030 # If the value is larger than one block size, it should be block size aligned.\r
fe44bae5
SZ		 1031 # @Prompt Size of flash FTW working block range.\r
1032 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
1033\r
1034 ## 64-bit Base address of the NV variable range in flash device.\r
1035 # @Prompt 64-bit Base address of flash NV variable range.\r
92a4f6f3 1036 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
1037\r
2c4b18e0 1038 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
fe44bae5 1039 # @Prompt 64-bit Base address of flash FTW spare block range.\r
92a4f6f3 1040 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
1041\r
1042 ## 64-bit Base address of the FTW working block range in flash device.\r
0d3edd9d 1043 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
fe44bae5 1044 # @Prompt 64-bit Base address of flash FTW working block range.\r
92a4f6f3 1045 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
1046\r
fe44bae5
SZ		 1047 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
1048 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
1049 # @Prompt Reserved memory range for EMU variable NV storage.\r
02328a57 1050 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
1051\r
a90ccab8 1052 ## This PCD defines the times to print hello world string.\r
fe44bae5
SZ		 1053 # This PCD is a sample to explain UINT32 PCD usage.\r
1054 # @Prompt HellowWorld print times.\r
4e17cc90 1055 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 1056\r
fe44bae5
SZ		 1057 ## This PCD defines the HelloWorld print string.\r
1058 # This PCD is a sample to explain String typed PCD usage.\r
1059 # @Prompt HelloWorld print string.\r
1060 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
1061\r
1062 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r
73850864 1063 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
fe44bae5 1064 # @Prompt Max size of populated capsule.\r
4e17cc90 1065 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
73850864 1066\r
fe44bae5 1067 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r
0ef42f88 1068 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
fe44bae5 1069 # @Prompt Max size of non-populated capsule.\r
4e17cc90 1070 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 1071\r
fe44bae5
SZ		 1072 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r
1073 # @Prompt Firmware vendor.\r
e026f005 1074 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
73850864 1075\r
fe44bae5
SZ		 1076 ## Firmware revision that is the default revision filled into the EFI System Table.\r
1077 # @Prompt Firmware revision.\r
6144e7af 1078 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
1079\r
fe44bae5
SZ		 1080 ## Null-terminated Unicode string that describes the firmware version.\r
1081 # @Prompt Firmware version string.\r
73850864 1082 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
1083\r
fe44bae5
SZ		 1084 ## Null-terminated Unicode string that contains the date the firmware was released\r
1085 # @Prompt Firmware release data string.\r
6144e7af 1086 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
1087\r
fe44bae5
SZ		 1088 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r
1089 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r
1090 # The default value in PeiPhase is 1 KBytes.<BR>\r
1091 # The default value in DxePhase is 128 KBytes.<BR>\r
1092 # @Prompt StatusCode memory size.\r
10c5d87e 1093 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
1094\r
fe44bae5
SZ		 1095 ## Indicates if to reset system when memory type information changes.<BR><BR>\r
1096 # TRUE - Resets system when memory type information changes.<BR>\r
1097 # FALSE - Does not reset system when memory type information changes.<BR>\r
1098 # @Prompt Reset on memory type information change.\r
dad63934
RN		 1099 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
1100\r
f0a1bf11 1101 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
fe44bae5
SZ		 1102 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1103 # 0x00 (EFI_BLACK)<BR>\r
1104 # 0x01 (EFI_BLUE)<BR>\r
1105 # 0x02 (EFI_GREEN)<BR>\r
1106 # 0x03 (EFI_CYAN)<BR>\r
1107 # 0x04 (EFI_RED)<BR>\r
1108 # 0x05 (EFI_MAGENTA)<BR>\r
1109 # 0x06 (EFI_BROWN)<BR>\r
1110 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1111 # 0x08 (EFI_DARKGRAY)<BR>\r
1112 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1113 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1114 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1115 # 0x0C (EFI_LIGHTRED)<BR>\r
1116 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1117 # 0x0E (EFI_YELLOW)<BR>\r
1118 # 0x0F (EFI_WHITE)<BR>\r
1119 # @Prompt Foreground color for browser subtile.\r
1120 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11
LG		 1121 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
1122 \r
1123 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
fe44bae5
SZ		 1124 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1125 # 0x00 (EFI_BLACK)<BR>\r
1126 # 0x01 (EFI_BLUE)<BR>\r
1127 # 0x02 (EFI_GREEN)<BR>\r
1128 # 0x03 (EFI_CYAN)<BR>\r
1129 # 0x04 (EFI_RED)<BR>\r
1130 # 0x05 (EFI_MAGENTA)<BR>\r
1131 # 0x06 (EFI_BROWN)<BR>\r
1132 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1133 # 0x08 (EFI_DARKGRAY)<BR>\r
1134 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1135 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1136 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1137 # 0x0C (EFI_LIGHTRED)<BR>\r
1138 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1139 # 0x0E (EFI_YELLOW)<BR>\r
1140 # 0x0F (EFI_WHITE)<BR>\r
1141 # @Prompt Foreground color for browser field.\r
1142 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11
LG		 1143 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
1144 \r
1145 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ		 1146 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
1147 # 0x00 (EFI_BLACK)<BR>\r
1148 # 0x01 (EFI_BLUE)<BR>\r
1149 # 0x02 (EFI_GREEN)<BR>\r
1150 # 0x03 (EFI_CYAN)<BR>\r
1151 # 0x04 (EFI_RED)<BR>\r
1152 # 0x05 (EFI_MAGENTA)<BR>\r
1153 # 0x06 (EFI_BROWN)<BR>\r
1154 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1155 # 0x08 (EFI_DARKGRAY)<BR>\r
1156 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1157 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1158 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1159 # 0x0C (EFI_LIGHTRED)<BR>\r
1160 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1161 # 0x0E (EFI_YELLOW)<BR>\r
1162 # 0x0F (EFI_WHITE)<BR>\r
1163 # @Prompt Foreground color for highlighted browser field.\r
1164 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
f0a1bf11
LG		 1165 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
1166 \r
1167 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
fe44bae5
SZ		 1168 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
1169 # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
1170 # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r
1171 # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r
1172 # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r
1173 # 0x40 (EFI_BACKGROUND_RED)<BR>\r
1174 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r
1175 # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r
1176 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r
1177 # @Prompt Background color for highlighted browser field.\r
1178 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r
f0a1bf11
LG		 1179 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
1180\r
ea060cfa 1181 ## Time in second to delay for SATA devices to spin-up for recovery.\r
fe44bae5 1182 # @Prompt SATA spin-up delay time in second for recovery path.\r
ea060cfa 1183 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
1184\r
fe44bae5 1185 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
88d20adc 1186 # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
1187 # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
1188 # script node created in runtime phase.\r
fe44bae5 1189 # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
88d20adc 1190 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
1191\r
ab7017fe 1192 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
fe44bae5
SZ		 1193 # The default size is 32K. When changing the value of this PCD, the platform developer should\r
1194 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r
1195 # @Prompt Stack size for CapsulePei transfer to long mode.\r
6bea3336 1196 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
ab7017fe 1197\r
fe44bae5
SZ		 1198 ## Indicates if 1G page table will be enabled.<BR><BR>\r
1199 # TRUE - 1G page table will be enabled.<BR>\r
1200 # FALSE - 1G page table will not be enabled.<BR>\r
1201 # @Prompt Enable 1G page table support.\r
3ecd0155
JY		 1202 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
1203\r
fe44bae5
SZ		 1204 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r
1205 # TRUE - Single Root I/O virtualization is supported.<BR>\r
1206 # FALSE - Single Root I/O virtualization is not supported.<BR>\r
1207 # @Prompt Enable SRIOV support.\r
1208 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
1209\r
1210 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r
1211 # TRUE - Alternative Routing-ID is supported.<BR>\r
1212 # FALSE - Alternative Routing-ID is not supported.<BR>\r
1213 # @Prompt Enable ARI support.\r
1214 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
1215\r
1216 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r
1217 # TRUE - Multi Root I/O virtualization is supported.<BR>\r
1218 # FALSE - Multi Root I/O virtualization is not supported.<BR>\r
1219 # @Prompt Enable MRIOV support.\r
1220 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
1221\r
1222 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r
1223 # BITN set indicates 2 of n+12 power<BR>\r
1224 # BIT0 set indicates 4KB alignment<BR>\r
1225 # BIT1 set indicates 8KB alignment<BR>\r
1226 # @Prompt SRIOV system page size.\r
1227 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
1228\r
35c77dae
LG		 1229 ## SMBIOS version.\r
1230 # @Prompt SMBIOS version.\r
54753b60 1231 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055\r
fe781940 1232\r
e63f3308
EL		 1233 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1234 # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1235 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A\r
1236\r
1237 ## SMBIOS produce method.\r
1238 # BIT0 set indicates 32-bit entry point and table are produced.<BR>\r
1239 # BIT1 set indicates 64-bit entry point and table are produced.<BR>\r
1240 # @Prompt The policy to produce SMBIOS entry point and table.\r
1241 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069\r
1242\r
fe44bae5
SZ		 1243 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
1244 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
1245 # @Prompt Pad size for extension FPDT boot records.\r
1c0cc375
LG		 1246 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
1247\r
fe44bae5
SZ		 1248 ## Indicates if ConIn device are connected on demand.<BR><BR>\r
1249 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
1250 # by Consplitter should be called before any real key read operation.<BR>\r
1251 # FALSE - ConIn device may be connected normally during BDS.<BR>\r
1252 # @Prompt ConIn connect on demand.\r
838a9c58 1253 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
1254\r
fe44bae5
SZ		 1255 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r
1256 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r
1257 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r
1258 # @Prompt Enable ATA S.M.A.R.T feature.\r
0e185864 1259 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
1260\r
fe44bae5
SZ		 1261 ## Indicates if full PCI enumeration is disabled.<BR><BR>\r
1262 # TRUE - Full PCI enumeration is disabled.<BR>\r
1263 # FALSE - Full PCI enumeration is not disabled.<BR>\r
1264 # @Prompt Disable full PCI enumeration.\r
5624a27d
WL		 1265 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
1266\r
fe44bae5 1267 ## Disk I/O - Number of Data Buffer block.\r
e645bd85 1268 # Define the size in block of the pre-allocated buffer. It provide better\r
fe44bae5
SZ		 1269 # performance for large Disk I/O requests.\r
1270 # @Prompt Disk I/O - Number of Data Buffer block.\r
e645bd85
OM		 1271 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
1272\r
0591696e
FT		 1273 ## This PCD specifies the PCI-based UFS host controller mmio base address.\r
1274 # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r
1275 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1276 # @Prompt Mmio base address of pci-based UFS host controller.\r
1277 gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
1278\r
8d51e87d
CZ		 1279 ## Specify Max ESRT cache entry number supported for FMP instances\r
1280 #\r
1281 # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
1282 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
1283\r
1284 ## Specify Max ESRT cache entry number supported for Non FMP instances\r
1285 #\r
1286 # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
1287 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
1288\r
1289 ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
1290 #\r
1291 # @Prompt Flag to request system reboot after processing capsule.\r
1292 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
1293\r
03d486b2
JY		 1294 ## Publish PropertiesTable or not.\r
1295 #\r
1296 # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
1297 # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
1298 # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
1299 # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
1300 # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
1301 #\r
1302 # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
1303 # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
1304 # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
1305 # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
1306 # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
1307 # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
1308 #\r
1309 # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
1310 # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
1311 # section. If PE code/data sections are merged, the result is unpredictable.\r
1312 #\r
1313 # @Prompt Publish UEFI PropertiesTable.\r
bc31c0c6 1314 gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r
03d486b2 1315\r
f096950d
SZ		 1316 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
1317 # @Prompt Default OEM ID for ACPI table creation.\r
1318 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
1319\r
1320 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
1321 # @Prompt Default OEM Table ID for ACPI table creation.\r
1322 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
1323\r
1324 ## Default OEM Revision for ACPI table creation.\r
1325 # @Prompt Default OEM Revision for ACPI table creation.\r
1326 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
1327\r
1328 ## Default Creator ID for ACPI table creation.\r
1329 # @Prompt Default Creator ID for ACPI table creation.\r
1330 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
1331\r
1332 ## Default Creator Revision for ACPI table creation.\r
1333 # @Prompt Default Creator Revision for ACPI table creation.\r
1334 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
1335\r
097e8d68 1336[PcdsPatchableInModule]\r
fe44bae5
SZ		 1337 ## Specify memory size with page number for PEI code when\r
1338 # Loading Module at Fixed Address feature is enabled.\r
1339 # The value will be set by the build tool.\r
1340 # @Prompt LMFA PEI code page number.\r
1341 # @ValidList 0x80000001 | 0\r
54ea99a7 1342 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
1343 \r
fe44bae5
SZ		 1344 ## Specify memory size with page number for DXE boot time code when\r
1345 # Loading Module at Fixed Address feature is enabled.\r
1346 # The value will be set by the build tool.\r
1347 # @Prompt LMFA DXE boot code page number.\r
1348 # @ValidList 0x80000001 | 0\r
54ea99a7 1349 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
1350 \r
fe44bae5
SZ		 1351 ## Specify memory size with page number for DXE runtime code when\r
1352 # Loading Module at Fixed Address feature is enabled.\r
1353 # The value will be set by the build tool.\r
1354 # @Prompt LMFA DXE runtime code page number.\r
1355 # @ValidList 0x80000001 | 0\r
54ea99a7 1356 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
1357 \r
fe44bae5
SZ		 1358 ## Specify memory size with page number for SMM code when\r
1359 # Loading Module at Fixed Address feature is enabled.\r
1360 # The value will be set by the build tool.\r
1361 # @Prompt LMFA SMM code page number.\r
1362 # @ValidList 0x80000001 | 0\r
54ea99a7 1363 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
1364\r
88d20adc 1365[PcdsDynamic, PcdsDynamicEx]\r
1366 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
1367 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1368 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1369 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ		 1370 # @Prompt S3 Boot Script Table Private Data pointer.\r
1371 # @ValidList 0x80000001 | 0x0\r
88d20adc 1372 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
1373\r
3aa764ed
SZ		 1374 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
1375 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1376 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1377 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
fe44bae5
SZ		 1378 # @Prompt S3 Boot Script Table Private Smm Data pointer.\r
1379 # @ValidList 0x80000001 | 0x0\r
3aa764ed
SZ		 1380 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
1381\r
b5040e4c
EL		 1382 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 \r
1383 # Virtual to Physical mapping according to the processor physical address bits.\r
fe44bae5
SZ		 1384 # @Prompt Identify Mapping Page Table pointer.\r
1385 # @ValidList 0x80000001 | 0x0\r
b5040e4c 1386 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
fe44bae5
SZ		 1387\r
1388[UserExtensions.TianoCore."ExtraFiles"]\r
1389 MdeModulePkgExtra.uni\r
EFI Development Kit II mirror for PVE