projects / mirror_edk2.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Change the PcdSrIovSystemPageSize from type of [PcdFixedAtBuild] to [PcdFixedAtBuild...
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
CommitLineData
e3e134eb 1## @file MdeModulePkg.dec\r
4f57ff18 2#\r
a9141950 3# This package provides the modules that conform to UEFI/PI Industry standards.\r
73850864 4# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
bf314e67 5# and libraries instances, which are used for those modules.\r
b7d286b6 6#\r
0777cea6 7# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>\r
64a80549 8# This program and the accompanying materials are licensed and made available under \r
9# the terms and conditions of the BSD License that accompanies this distribution. \r
4f57ff18 10# The full text of the license may be found at\r
64a80549 11# http://opensource.org/licenses/bsd-license.php. \r
12# \r
13# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
14# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
b7d286b6 15#\r
4f57ff18 16##\r
b7d286b6 17\r
18\r
b7d286b6 19[Defines]\r
20 DEC_SPECIFICATION = 0x00010005\r
84e20859 21 PACKAGE_NAME = MdeModulePkg\r
b7d286b6 22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
048fc992 23 PACKAGE_VERSION = 0.92\r
b7d286b6 24\r
6bfbb5f0 25[Includes]\r
ed838d0c 26 Include\r
b7d286b6 27\r
30143b15 28\r
6bfbb5f0 29[LibraryClasses]\r
4f57ff18 30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
93367605 31 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 32 IpIoLib|Include/Library/IpIoLib.h\r
73850864 33\r
4f57ff18 34 ## @libraryclass Basic function for UEFI network stack.\r
93367605 35 # This library is only intended to be used by UEFI network stack modules.\r
518d395c 36 NetLib|Include/Library/NetLib.h\r
73850864 37\r
4f57ff18 38 ## @libraryclass The helper routines to access UDP service.\r
93367605 39 # This library is only intended to be used by UEFI network stack modules.\r
30143b15 40 UdpIoLib|Include/Library/UdpIoLib.h\r
73850864 41\r
4bad9ada 42 ## @libraryclass The helper routines to access TCP service.\r
43 # This library is only intended to be used by UEFI network stack modules.\r
44 TcpIoLib|Include/Library/TcpIoLib.h\r
45\r
97b2c9b5
LG		 46 ## @libraryclass Defines a set of methods to reset whole system.\r
47 ResetSystemLib|Include/Library/ResetSystemLib.h\r
48\r
4f57ff18 49 ## @libraryclass Defines a set of methods related do S3 mode.\r
05d71050 50 # This library class is no longer used and modules using this library should\r
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
4fb31c2c 52 S3Lib|Include/Library/S3Lib.h\r
73850864 53\r
4f57ff18 54 ## @libraryclass Defines a set of methods related recovery mode.\r
05d71050 55 # This library class is no longer used and modules using this library should\r
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
4fb31c2c 57 RecoveryLib|Include/Library/RecoveryLib.h\r
73850864 58\r
804dbc37 59 ## @libraryclass Provides HII related functions.\r
60 HiiLib|Include/Library/HiiLib.h\r
73850864 61\r
4f57ff18 62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
30d3be34 63 CapsuleLib|Include/Library/CapsuleLib.h\r
73850864 64\r
4f57ff18 65 ## @libraryclass Library for Deferred Procedure Calls.\r
f02d0c0f
LG		 66 DpcLib|Include/Library/DpcLib.h\r
67\r
73850864 68 ## @libraryclass Provides global variables that are pointers\r
a90ccab8
LG		 69 # to the UEFI HII related protocols.\r
70 #\r
da801a6e 71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
9a6dcbf3 72\r
cd98f305
LG		 73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
74 #\r
975e8815 75 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
cd98f305 76\r
75dea6bd 77 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
78 #\r
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
80\r
fe92ab29 81 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
82 #\r
83 DebugAgentLib|Include/Library/DebugAgentLib.h\r
6eea8eae 84\r
467d15ae 85 ## @libraryclass Provide platform specific hooks.\r
86 #\r
87 PlatformHookLib|Include/Library/PlatformHookLib.h\r
495797c5 88\r
89 ## @libraryclass Provide platform specific hooks for SMM core.\r
90 #\r
91 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
32e85209
JY		 92\r
93 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
94 #\r
95 LockBoxLib|Include/Library/LockBoxLib.h\r
467d15ae 96 \r
1e172d6b 97 ## @libraryclass Provide the CPU exception handler.\r
98 #\r
99 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
100 \r
6bfbb5f0 101[Guids]\r
f02d0c0f 102 ## MdeModule package token space guid\r
a90ccab8 103 # Include/Guid/MdeModulePkgTokenSpace.h\r
f02d0c0f 104 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
351986ae 105\r
f02d0c0f 106 ## Hob guid for Pcd DataBase\r
a90ccab8 107 # Include/Guid/PcdDataBaseHobGuid.h\r
351986ae 108 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
73850864 109\r
5c526736 110 ## Guid for EDKII implementation GUIDed opcodes\r
97b2c9b5 111 # Include/Guid/MdeModuleHii.h\r
5c526736 112 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
73850864 113\r
5c526736 114 ## Guid for Framework vfr GUIDed opcodes.\r
97b2c9b5 115 # Include/Guid/MdeModuleHii.h\r
5c526736 116 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
73850864 117\r
f02d0c0f 118 ## Guid to specify the System Non Volatile FV\r
a90ccab8 119 # Include/Guid/SystemNvDataGuid.h\r
351986ae 120 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
73850864 121\r
3e02ebb2
SZ		 122 ## GUID used as the signature of FTW working block header.\r
123 # Include/Guid/SystemNvDataGuid.h\r
124 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
125\r
126 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
127 # Include/Guid/FaultTolerantWrite.h\r
128 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
129\r
f02d0c0f 130 ## Guid specify the device is the console out device.\r
a90ccab8 131 # Include/Guid/ConsoleOutDevice.h\r
351986ae 132 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
f02d0c0f
LG		 133\r
134 ## Guid specify the device is the console in device.\r
a90ccab8 135 # Include/Guid/ConsoleInDevice.h\r
351986ae 136 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 137\r
f02d0c0f 138 ## Hob and Variable guid specify the platform memory type information.\r
a90ccab8 139 # Include/Guid/MemoryTypeInformation.h\r
351986ae 140 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
73850864 141\r
f02d0c0f 142 ## Capsule update hob and variable guid\r
a90ccab8 143 # Include/Guid/CapsuleVendor.h\r
351986ae 144 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
73850864 145\r
f02d0c0f 146 ## Guid specifiy the device is the StdErr device.\r
a90ccab8 147 # Include/Guid/StandardErrorDevice.h\r
88f20127 148 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
73850864 149\r
3709c4cd 150 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
a90ccab8 151 # Include/Guid/VariableFormat.h\r
3709c4cd 152 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
73850864 153\r
9725730b 154 # Include/Guid/VariableIndexTable.h\r
155 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
156\r
d00ed85e 157 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
158 # Include/Guid/SmmVariableCommon.h\r
159 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
160 \r
2db4a77e 161 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
a90ccab8 162 # Include/Guid/Performance.h\r
f0da4d7d
SZ		 163 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
164 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
165 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
166 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
1df7a023 167\r
76f1dde2 168 ## Guid is defined for CRC32 encapsulation scheme.\r
a90ccab8 169 # Include/Guid/Crc32GuidedSectionExtraction.h\r
76f1dde2
LG		 170 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
171\r
63886849 172 ## Include/Guid/NicIp4ConfigNvData.h\r
173 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
25126a05 174\r
175 ## Include/Guid/StatusCodeCallbackGuid.h\r
176 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
63886849 177\r
10c5d87e 178 ## GUID identifies status code records HOB that originate from the PEI status code\r
179 # Include/Guid/MemoryStatusCodeRecord.h\r
180 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
181\r
182 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
183 # Include/Guid/StatusCodeDataTypeDebug.h\r
184 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
185\r
54ea99a7 186 ## A configuration Table Guid for Load module at fixed address \r
187 # Include/Guid/LoadModuleAtFixedAddress.h\r
188 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
189\r
62a5bf63 190 ## GUID used to store the global debug mask value into an EFI Variable\r
191 # Include/Guid/DebugMask.h \r
192 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
193 \r
54cd17e9 194 ## Event for the DXE Core to signal idle events\r
195 # Include/Guid/EventIdle.h\r
196 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
197\r
30c00a1c 198 ## Include/Guid/RecoveryDevice.h\r
199 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
200\r
201 ## Include/Guid/RecoveryDevice.h\r
202 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
203\r
204 ## Include/Guid/RecoveryDevice.h\r
205 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
206\r
207 ## Include/Guid/RecoveryDevice.h\r
208 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
209\r
1c837cd5 210 ## Include/Guid/SmmLockBox.h\r
044824d9 211 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
1c837cd5 212\r
1261fe23 213 ## Include/Guid/AcpiS3Context.h\r
214 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
215\r
216 ## Include/Guid/AcpiS3Context.h\r
217 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
218\r
be46cd5f 219 ## Include/Guid/BootScriptExecutorVariable.h\r
220 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
221 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
222\r
c8ad2d7a
LG		 223 ## Include/Guid/UsbKeyBoardLayout.h\r
224 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
225 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
226 \r
227 ## Include/Guid/HiiResourceSampleHii.h\r
228 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
229\r
230 ## Include/Guid/DriverSampleHii.h\r
231 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
232 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
c8ad2d7a
LG		 233 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
234\r
235 ## Include/Guid/PlatDriOverrideHii.h\r
236 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
237\r
238 ## Include/Guid/Ip4ConfigHii.h\r
239 gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
240\r
241 ## Include/Guid/VlanConfigHii.h\r
242 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
243\r
244 ## Include/Guid/Ip4IScsiConfigHii.h\r
245 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
246 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
247\r
248 ## Include/Guid/ZeroGuid.h\r
249 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
250 \r
251 ## Include/Guid/MtcVendor.h\r
252 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
253\r
0284e90c
LG		 254 ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
255 # Include/Guid/FirmwarePerformance.h\r
044824d9 256 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
db91c620 257 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
044824d9 258\r
259 ## Include/Guid/ExitBootServiceFailed.h\r
260 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
0284e90c 261\r
f58f3de0 262 ## Include/Guid/ConnectConInEvent.h\r
263 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
264\r
4b1bf81c 265[Ppis]\r
ea060cfa 266 ## Include/Ppi/AtaController.h\r
267 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
268\r
4b1bf81c 269 ## Include/Ppi/UsbHostController.h\r
270 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
271\r
272 ## Include/Ppi/Usb2HostController.h\r
273 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
274\r
275 ## Include/Ppi/UsbController.h\r
276 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
277\r
278 ## Include/Ppi/UsbIo.h\r
279 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
280\r
da58b0db 281 ## Include/Ppi/Capsule.h\r
282 gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
283\r
ce2f13a3 284 ## Include/Ppi/SecPerformance.h\r
285 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
286\r
9fba8e7d 287 ## Include/Ppi/SmmCommunication.h\r
288 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
289\r
e7b7db36 290 ## Include/Ppi/SmmAccess.h\r
291 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
292\r
3e4df77f 293 ## Include/Ppi/SmmControl.h\r
294 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
295\r
78df32f2 296 ## Include/Ppi/PostBootScriptTable.h\r
297 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
298\r
6bfbb5f0 299[Protocols]\r
023c0fec 300 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
a90ccab8
LG		 301 # Include/Protocol/LoadPe32Image.h\r
302 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
303 # If developer need implement such functionality, they should use BasePeCoffLib.\r
023c0fec 304 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
73850864 305\r
504dcb0a 306 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
a90ccab8 307 # Include/Protocol/Print2.h\r
504dcb0a 308 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
2dd4c603 309\r
346cf9ac 310 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
a90ccab8 311 # Include/Protocol/GenericMemoryTest.h\r
351986ae 312 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
73850864 313\r
55e4e173 314 ## Include/Protocol/Dpc.h\r
36ee91ca 315 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
73850864 316\r
85e923a5
LG		 317 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
318 # Include/Protocol/FaultTolerantWrite.h\r
319 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
73850864 320\r
8a2d4996 321 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
322 # Include/Protocol/SmmFaultTolerantWrite.h\r
323 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
324 \r
85e923a5
LG		 325 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
326 # Include/Protocol/SwapAddressRange.h\r
327 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
8a2d4996 328 \r
329 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
330 # Include/Protocol/SmmSwapAddressRange.h\r
331 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
332 \r
333 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
334 # Include/Protocol/SmmVariableProtocol.h\r
335 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
336\r
ff843847
RN		 337 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
338 # Include/Protocol/VariableLock.h\r
339 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
340\r
8a2d4996 341 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
342 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
343 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
73850864 344\r
62a5bf63 345 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
346 # Include/Guid/DebugMask.h \r
347 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
1c837cd5 348\r
349 ## Include/Protocol/LockBox.h\r
350 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
0a48ffb0
LG		 351 \r
352 ## Include/Protocol/FormBrowserEx.h\r
48a9d5f7
LG		 353 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
354\r
c8ad2d7a
LG		 355 ## Include/Protocol/EbcVmTest.h\r
356 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
357\r
358 ## Include/Protocol/EbcSimpleDebugger.h\r
359 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
e2988e66 360\r
361 ## Include/Protocol/BootLogo.h\r
362 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
363\r
a86ae184 364[PcdsFeatureFlag]\r
f02d0c0f 365 ## Indicate whether platform can support update capsule across a system reset\r
109e9a61 366 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
73850864 367\r
f806dd27 368 ## This feature flag can be used to enable or disable all PCD PEIM services.\r
aa19fa57 369 # If TRUE, all PCD PPI services will be produced.\r
a90ccab8 370 # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
f806dd27
LG		 371 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
372\r
f02d0c0f
LG		 373 ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
374 # It can be disabled to save size.\r
348c8131 375 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
73850864 376\r
f02d0c0f
LG		 377 ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
378 # It can be disabled to save size.\r
348c8131 379 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
73850864 380\r
fc9da5a6 381 ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
382 # stored as a vendor configuration table into the EFI system table.\r
5e895e6a 383 # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
73850864 384 # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
5e895e6a 385 # not output useful info.\r
33a5a666 386 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
73850864 387\r
f02d0c0f 388 ## If TRUE, Unicode Collation Protocol will be installed.\r
ac12a167 389 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
73850864 390\r
f02d0c0f 391 ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
ac12a167 392 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
73850864 393\r
cebfa899 394 ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
395 # It could be set FALSE to save size.\r
d0c64728 396 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
73850864 397\r
cebfa899 398 ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
399 # It could be set FALSE to save size.\r
d0c64728 400 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
73850864 401\r
aa19fa57
LG		 402 ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
403 # If TE section is not found, then PeiCore will search PE section.\r
404 # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
405 # This PCD is used to tune Pei phase performance to reduce the search image time.\r
406 # It can be set according to the generated image section type.\r
3076397e 407 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
73850864 408\r
fc9da5a6 409 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
c39c3e21
RN		 410 # interrupt to access usb device in the case of absence of usb stack. \r
411 # DUET platform requires the token to be TRUE.\r
cc582cff 412 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
8a2d4996 413 \r
f02d0c0f
LG		 414 ## If TRUE, HiiImageProtocol will be installed.\r
415 # FALSE is for size reduction.\r
813acf3a 416 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
73850864 417\r
a8e1ed54 418 ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
419 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
420 # from HII database.\r
813acf3a 421 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
88f20127 422\r
73850864 423 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
f806dd27 424 # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
a90ccab8 425 # This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
f806dd27 426 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
73850864 427\r
a90ccab8 428 ## If TRUE, HelloWorld Application will print the verbose information.\r
223c22d8 429 # This PCD is a sample to explain FeatureFlag PCD usage.\r
223c22d8 430 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
41ad45c2 431\r
a90ccab8 432 ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
85e923a5 433 # If FASLE, only FTW Write service is available.\r
72670d3e 434 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
435\r
a90ccab8 436 ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
72670d3e 437 # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
438 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
85e923a5 439\r
9060e3ec 440 ## This PCD specifies whether PciBus supports the hot plug device.\r
441 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
442\r
1ef26783 443 ## This PCD specifies whether the PCI bus driver probes non-standard, \r
444 # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
b3ec9b56 445 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
10c5d87e 446 ## This PCD specifies whether StatusCode is reported via Serial port.\r
447 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
448\r
449 ## This PCD specifies whether StatusCode is stored in memory.\r
450 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r
451 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
452\r
453 ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
454 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
9060e3ec 455\r
3dc8585e
JY		 456 ## This PCD specified whether ACPI SDT protocol is installed.\r
457 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
458\r
aeeb84ba 459 ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
460 # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
461 # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
462 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
11232773
LG		 463\r
464 ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
465 # If TRUE, TEXT statement will always be set to GrayOut.\r
466 # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
467 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
aeeb84ba 468 \r
0777cea6
ED		 469 ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.\r
470 # If TRUE, the unselectable menu will be set to GrayOut.\r
471 # If FALSE, the menu will be show as normal menu entry even if it is not selectable.\r
472 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
473\r
74ef1d42 474 ## If TRUE, recovery from IDE disk will be supported.\r
475 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
476\r
477 ## If TRUE, recovery from FAT floppy disk will be supported.\r
478 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
479\r
480 ## If TRUE, recovery from data CD will be supported.\r
481 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
482\r
483 ## If TRUE, recovery from FAT USB disk will be supported.\r
484 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
485\r
0284e90c
LG		 486 ## If TRUE, S3 performance data will be supported in ACPI FPDT table.\r
487 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
488\r
5d2311be 489[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
73850864 490 ##\r
4e17cc90 491 # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
492 # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
493 # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
494 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
495 # is built in firmware.\r
496 #\r
497 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
498\r
e47f0da4 499 ##\r
500 # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r
501 # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r
502 #\r
503 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
504\r
a86ae184 505[PcdsFixedAtBuild]\r
1cedc893 506 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
507 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
508 # for a dynamic PCD used in PEI phase.\r
b3af5df6 509 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
9dddc0ff 510\r
1cedc893 511 ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
73850864 512 # to store PCD value.\r
1cedc893 513 #\r
b3af5df6 514 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
73850864 515\r
1cedc893 516 ## Maximum number of FV is supported by PeiCore's dispatching.\r
177aabe6 517 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
f02d0c0f 518\r
1cedc893 519 ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
177aabe6 520 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
f02d0c0f 521\r
1cedc893 522 ## Maximum stack size for PeiCore.\r
58dcdada 523 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
f02d0c0f 524\r
1cedc893 525 ## Maximum PPI count is supported by PeiCore's PPI database.\r
eaf539d0 526 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
73850864 527\r
2fcdca1d 528 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
a90ccab8
LG		 529 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
530 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
531 # be reflushed through the manner of fault tolerant write.\r
b3af5df6 532 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
73850864 533\r
2fcdca1d 534 ## The maximum size of single common variable, that is non-HwErr type varible.\r
518d395c 535 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
73850864 536\r
2fcdca1d 537 ## The maximum size of single hardware error record variable.\r
538 # In IA32/X64 platforms, this value should be larger than 1KB.\r
539 # In IA64 platforms, this value should be larger than 128KB.\r
518d395c 540 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
73850864 541\r
48cd992a 542 ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r
543 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
544 # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
2fcdca1d 545 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
48cd992a 546 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
2fcdca1d 547\r
548 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
518d395c 549 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
2fcdca1d 550\r
2c4b18e0 551 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
2fcdca1d 552 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
553 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
554 # be reflushed through the manner of fault tolerant write.\r
b3af5df6 555 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
73850864 556\r
f02d0c0f 557 ## Size of the FTW working block range.\r
b3af5df6 558 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
3c506ddd 559\r
560 ## FFS filename to find the ACPI tables\r
63971079 561 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
3c506ddd 562\r
ab7017fe 563 ## FFS filename to find the capsule coalesce image.\r
564 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
565\r
54ea99a7 566 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
567 # -1: Enable the feature as fixed offset to TOLM\r
568 # 0: Disable the feature.\r
569 # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
570 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
d13e7bda 571\r
9f7d5b46 572 ## Smbios version\r
afe3969c 573 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
9060e3ec 574\r
cfbc1a75 575 ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
576 # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
577 #\r
578 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
579\r
eab90a61 580 ## Progress Code for OS Loader LoadImage start.\r
581 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r
582 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
583\r
584 ## Progress Code for OS Loader StartImage start.\r
585 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r
586 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
587\r
588 ## Progress Code for S3 Suspend start.\r
589 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000\r
590 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
591\r
592 ## Progress Code for S3 Suspend end.\r
593 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001\r
594 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
595\r
a86ae184 596[PcdsFixedAtBuild,PcdsPatchableInModule]\r
f02d0c0f 597 ## Maximun number of performance log entries during PEI phase.\r
348c8131 598 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
4e17cc90 599\r
600 ## RTC Update Timeout Value\r
601 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
73850864 602\r
467d15ae 603 ## If TRUE, then 16550 serial port registers are in MMIO space. \r
604 # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r
605 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
606 \r
607 ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
608 # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
609 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
610\r
784ce127 611 ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
612 # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
613 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
614 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
615 \r
467d15ae 616 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
617 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
618\r
619 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
620 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
621\r
622 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r
623 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
624 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
625 # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
626 # BIT7..BIT6 - Reserved. Must be 0.\r
627 #\r
628 # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
629 #\r
630 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
631\r
632 ## FIFO Control Register (FCR) for the 16550 serial port. \r
633 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
634 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
635 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
acaa2726 636 # BIT4..BIT3 - Reserved. Must be 0.\r
637 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r
638 # BIT7..BIT6 - Reserved. Must be 0.\r
467d15ae 639 #\r
640 # Default is to enable and clear all FIFOs.\r
641 #\r
642 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
643\r
6eea8eae
LG		 644 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
645 # structure. The default value for this PCD is 0, which means that the DXE Core\r
646 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
647 # boundary as close to the top of memory as feasible. If this PCD is set to a \r
648 # value other than 0, then the DXE Core will first attempt to allocate the \r
649 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
650 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
651 # boundary as close to the top of memory as feasible.\r
652 #\r
653 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
838a9c58 654\r
be046357 655[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
b9b5e307 656 ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r
657 # This PCD could be set to 0 then console output could be at max column and max row.\r
4bfa7dc4 658 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
73850864 659\r
b9b5e307 660 ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.\r
661 # This PCD could be set to 0 then console output could be at max column and max row.\r
4e17cc90 662 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
73850864 663\r
b9b5e307 664 ## This PCD defines the video horizontal resolution.\r
665 # This PCD could be set to 0 then video resolution could be at highest resolution.\r
666 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
667\r
668 ## This PCD defines the video vertical resolution.\r
669 # This PCD could be set to 0 then video resolution could be at highest resolution.\r
670 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
671\r
be046357 672[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
73850864 673 ## Base address of the NV variable range in flash device\r
a86ae184 674 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
73850864 675\r
2c4b18e0 676 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
73850864 677 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
678\r
a86ae184 679 ## Base address of the FTW working block range in flash device.\r
73850864 680 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
681\r
92a4f6f3 682 ## 64-bit Base address of the NV variable range in flash device\r
683 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
684\r
2c4b18e0 685 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
92a4f6f3 686 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
687\r
688 ## 64-bit Base address of the FTW working block range in flash device.\r
689 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
690\r
a90ccab8 691 ## This PCD defines the print string.\r
4e17cc90 692 # This PCD is a sample to explain String typed PCD usage.\r
73850864 693 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
694\r
02328a57 695 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r
696 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
697 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
698\r
099f2b18 699 ## This PCD specifies whether the Single Root I/O virtualization support.\r
700 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
701\r
d13e7bda
RN		 702 ## Single root I/O virtualization virtual function memory BAR alignment\r
703 # BITN set indicates 2 of n+12 power\r
704 # BIT0 set indicates 4KB alignment\r
705 # BIT1 set indicates 8KB alignment\r
706 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
707\r
099f2b18 708 ## This PCD specifies whether the Alternative Routing-ID support.\r
709 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
710\r
711 ## This PCD specifies whether the Multi Root I/O virtualization support.\r
712 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
713\r
be046357 714[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
a90ccab8 715 ## This PCD defines the times to print hello world string.\r
4e17cc90 716 # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
4e17cc90 717 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
b7d286b6 718\r
0ef42f88 719 ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
73850864 720 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
4e17cc90 721 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
73850864 722\r
0ef42f88 723 ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
724 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
4e17cc90 725 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
6144e7af 726\r
727 ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
e026f005 728 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
73850864 729\r
6144e7af 730 ## Firmware revision that is default value filled into the EFI System Table\r
731 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
732\r
733 ## Null-terminated Unicode string that described the firmware version\r
73850864 734 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
735\r
6144e7af 736 ## Null-terminated Unicode string that contains the date the formware was released\r
737 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
738\r
10c5d87e 739 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r
740 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r
741 # The default value in PeiPhase is 1 KBytes.\r
742 # The default value in DxePhase is 128 KBytes.\r
743 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
744\r
dad63934
RN		 745 ## This PCD specifies whether to reset system when memory type information changes.\r
746 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
747\r
f0a1bf11
LG		 748 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
749 # Only following values defined in UEFI specification are valid:\r
750 # 0x00 (EFI_BLACK)\r
751 # 0x01 (EFI_BLUE)\r
752 # 0x02 (EFI_GREEN)\r
753 # 0x03 (EFI_CYAN)\r
754 # 0x04 (EFI_RED)\r
755 # 0x05 (EFI_MAGENTA)\r
756 # 0x06 (EFI_BROWN)\r
757 # 0x07 (EFI_LIGHTGRAY)\r
758 # 0x08 (EFI_DARKGRAY) \r
759 # 0x09 (EFI_LIGHTBLUE)\r
760 # 0x0A (EFI_LIGHTGREEN)\r
761 # 0x0B (EFI_LIGHTCYAN)\r
762 # 0x0C (EFI_LIGHTRED)\r
763 # 0x0D (EFI_LIGHTMAGENTA)\r
764 # 0x0E (EFI_YELLOW)\r
765 # 0x0F (EFI_WHITE)\r
766 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
767 \r
768 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
769 # Only following values defined in UEFI specification are valid:\r
770 # 0x00 (EFI_BLACK)\r
771 # 0x01 (EFI_BLUE)\r
772 # 0x02 (EFI_GREEN)\r
773 # 0x03 (EFI_CYAN)\r
774 # 0x04 (EFI_RED)\r
775 # 0x05 (EFI_MAGENTA)\r
776 # 0x06 (EFI_BROWN)\r
777 # 0x07 (EFI_LIGHTGRAY)\r
778 # 0x08 (EFI_DARKGRAY) \r
779 # 0x09 (EFI_LIGHTBLUE)\r
780 # 0x0A (EFI_LIGHTGREEN)\r
781 # 0x0B (EFI_LIGHTCYAN)\r
782 # 0x0C (EFI_LIGHTRED)\r
783 # 0x0D (EFI_LIGHTMAGENTA)\r
784 # 0x0E (EFI_YELLOW)\r
785 # 0x0F (EFI_WHITE)\r
786 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
787 \r
788 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
789 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
790 # 0x00 (EFI_BLACK)\r
791 # 0x01 (EFI_BLUE)\r
792 # 0x02 (EFI_GREEN)\r
793 # 0x03 (EFI_CYAN)\r
794 # 0x04 (EFI_RED)\r
795 # 0x05 (EFI_MAGENTA)\r
796 # 0x06 (EFI_BROWN)\r
797 # 0x07 (EFI_LIGHTGRAY)\r
798 # 0x08 (EFI_DARKGRAY) \r
799 # 0x09 (EFI_LIGHTBLUE)\r
800 # 0x0A (EFI_LIGHTGREEN)\r
801 # 0x0B (EFI_LIGHTCYAN)\r
802 # 0x0C (EFI_LIGHTRED)\r
803 # 0x0D (EFI_LIGHTMAGENTA)\r
804 # 0x0E (EFI_YELLOW)\r
805 # 0x0F (EFI_WHITE)\r
806 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
807 \r
808 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
809 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
810 # 0x00 (EFI_BACKGROUND_BLACK)\r
811 # 0x10 (EFI_BACKGROUND_BLUE)\r
812 # 0x20 (EFI_BACKGROUND_GREEN)\r
813 # 0x30 (EFI_BACKGROUND_CYAN)\r
814 # 0x40 (EFI_BACKGROUND_RED)\r
815 # 0x50 (EFI_BACKGROUND_MAGENTA)\r
816 # 0x60 (EFI_BACKGROUND_BROWN)\r
817 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
818 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
819\r
ea060cfa 820 ## Time in second to delay for SATA devices to spin-up for recovery.\r
821 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
822\r
88d20adc 823 ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
824 # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
825 # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
826 # script node created in runtime phase.\r
827 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
828\r
ab7017fe 829 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
830 # The default size 32K. When changing the value of this PCD, the platform developer should\r
831 # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.\r
6bea3336 832 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
ab7017fe 833\r
3ecd0155
JY		 834 ## This PCD specifies whether 1G page table is enabled.\r
835 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
836\r
1c0cc375
LG		 837 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for \r
838 # the extension FPDT boot records got after ReadyToBoot and before ExitBootService.\r
839 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
840\r
838a9c58 841 ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn\r
842 # device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
843 # by Consplitter should be called before any real key read operation.\r
844 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
845\r
0e185864 846 ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.\r
847 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
848\r
097e8d68
LG		 849[PcdsPatchableInModule]\r
850 ## Specify memory size with page number for PEI code when \r
851 # the feature of Loading Module at Fixed Address is enabled\r
54ea99a7 852 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
853 \r
854 ## Specify memory size with page number for DXE boot time code when \r
855 # the feature of Loading Module at Fixed Address is enabled\r
856 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
857 \r
858 ## Specify memory size with page number for DXE runtime code when \r
859 # the feature of Loading Module at Fixed Address is enabled\r
860 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
861 \r
862 ## Specify memory size with page number for SMM code when \r
863 # the feature of Loading Module at Fixed Address is enabled\r
864 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
865\r
88d20adc 866[PcdsDynamic, PcdsDynamicEx]\r
867 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
868 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
869 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
870 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
871 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
872\r
3aa764ed
SZ		 873 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
874 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
875 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
876 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
877 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
878\r
EFI Development Kit II mirror for PVE