[mirror_edk2.git] / MdeModulePkg / Universal / Network / SnpDxe / Snp.c

/** @file\r
  Implementation of driver entry point and driver binding protocol.\r
\r
Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials are licensed\r
and made available under the terms and conditions of the BSD License which\r
accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include "Snp.h"\r
\r
/**\r
  One notified function to stop UNDI device when gBS->ExitBootServices() called.\r
\r
  @param  Event                   Pointer to this event\r
  @param  Context                 Event handler private data\r
\r
**/\r
VOID\r
EFIAPI\r
SnpNotifyExitBootServices (\r
  EFI_EVENT Event,\r
  VOID      *Context\r
  )\r
{\r
  SNP_DRIVER             *Snp;\r
\r
  Snp  = (SNP_DRIVER *)Context;\r
\r
  //\r
  // Shutdown and stop UNDI driver\r
  //\r
  PxeShutdown (Snp);\r
  PxeStop (Snp);\r
}\r
\r
/**\r
  Send command to UNDI. It does nothing currently.\r
\r
  @param Cdb   command to be sent to UNDI.\r
\r
  @retval EFI_INVALID_PARAMETER  The command is 0.\r
  @retval EFI_UNSUPPORTED        Default return status because it's not\r
                                 supported currently.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
IssueHwUndiCommand (\r
  UINT64 Cdb\r
  )\r
{\r
  DEBUG ((EFI_D_ERROR, "\nIssueHwUndiCommand() - This should not be called!"));\r
\r
  if (Cdb == 0) {\r
    return EFI_INVALID_PARAMETER;\r
\r
  }\r
  //\r
  //  %%TBD - For now, nothing is done.\r
  //\r
  return EFI_UNSUPPORTED;\r
}\r
\r
\r
/**\r
  Compute 8-bit checksum of a buffer.\r
\r
  @param  Buffer               Pointer to buffer.\r
  @param  Length               Length of buffer in bytes.\r
\r
  @return 8-bit checksum of all bytes in buffer, or zero if ptr is NULL or len\r
          is zero.\r
\r
**/\r
UINT8\r
Calc8BitCksum (\r
  VOID  *Buffer,\r
  UINTN Length\r
  )\r
{\r
  UINT8 *Ptr;\r
  UINT8 Cksum;\r
\r
  Ptr   = Buffer;\r
  Cksum = 0;\r
\r
  if (Ptr == NULL || Length == 0) {\r
    return 0;\r
  }\r
\r
  while (Length-- != 0) {\r
    Cksum = (UINT8) (Cksum + *Ptr++);\r
  }\r
\r
  return Cksum;\r
}\r
\r
/**\r
  Test to see if this driver supports ControllerHandle. This service\r
  is called by the EFI boot service ConnectController(). In\r
  order to make drivers as small as possible, there are a few calling\r
  restrictions for this service. ConnectController() must\r
  follow these calling restrictions. If any other agent wishes to call\r
  Supported() it must also follow these calling restrictions.\r
\r
  @param  This                Protocol instance pointer.\r
  @param  ControllerHandle    Handle of device to test.\r
  @param  RemainingDevicePath Optional parameter use to pick a specific child\r
                              device to start.\r
\r
  @retval EFI_SUCCESS         This driver supports this device.\r
  @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
  @retval other               This driver does not support this device.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SimpleNetworkDriverSupported (\r
  IN EFI_DRIVER_BINDING_PROTOCOL    *This,\r
  IN EFI_HANDLE                     Controller,\r
  IN EFI_DEVICE_PATH_PROTOCOL       *RemainingDevicePath\r
  )\r
{\r
  EFI_STATUS                                Status;\r
  EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL *NiiProtocol;\r
  PXE_UNDI                                  *Pxe;\r
\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiDevicePathProtocolGuid,\r
                  NULL,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_TEST_PROTOCOL\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiNetworkInterfaceIdentifierProtocolGuid_31,\r
                  (VOID **) &NiiProtocol,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_BY_DRIVER\r
                  );\r
\r
  if (EFI_ERROR (Status)) {\r
    if (Status == EFI_ALREADY_STARTED) {\r
      DEBUG ((EFI_D_INFO, "Support(): Already Started. on handle %p\n", Controller));\r
    }\r
    return Status;\r
  }\r
\r
  DEBUG ((EFI_D_INFO, "Support(): UNDI3.1 found on handle %p\n", Controller));\r
\r
  //\r
  // check the version, we don't want to connect to the undi16\r
  //\r
  if (NiiProtocol->Type != EfiNetworkInterfaceUndi) {\r
    Status = EFI_UNSUPPORTED;\r
    goto Done;\r
  }\r
  //\r
  // Check to see if !PXE structure is valid. Paragraph alignment of !PXE structure is required.\r
  //\r
  if ((NiiProtocol->Id & 0x0F) != 0) {\r
    DEBUG ((EFI_D_NET, "\n!PXE structure is not paragraph aligned.\n"));\r
    Status = EFI_UNSUPPORTED;\r
    goto Done;\r
  }\r
\r
  Pxe = (PXE_UNDI *) (UINTN) (NiiProtocol->Id);\r
\r
  //\r
  //  Verify !PXE revisions.\r
  //\r
  if (Pxe->hw.Signature != PXE_ROMID_SIGNATURE) {\r
    DEBUG ((EFI_D_NET, "\n!PXE signature is not valid.\n"));\r
    Status = EFI_UNSUPPORTED;\r
    goto Done;\r
  }\r
\r
  if (Pxe->hw.Rev < PXE_ROMID_REV) {\r
    DEBUG ((EFI_D_NET, "\n!PXE.Rev is not supported.\n"));\r
    Status = EFI_UNSUPPORTED;\r
    goto Done;\r
  }\r
\r
  if (Pxe->hw.MajorVer < PXE_ROMID_MAJORVER) {\r
\r
    DEBUG ((EFI_D_NET, "\n!PXE.MajorVer is not supported.\n"));\r
    Status = EFI_UNSUPPORTED;\r
    goto Done;\r
\r
  } else if (Pxe->hw.MajorVer == PXE_ROMID_MAJORVER && Pxe->hw.MinorVer < PXE_ROMID_MINORVER) {\r
    DEBUG ((EFI_D_NET, "\n!PXE.MinorVer is not supported."));\r
    Status = EFI_UNSUPPORTED;\r
    goto Done;\r
  }\r
  //\r
  // Do S/W UNDI specific checks.\r
  //\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_HW_UNDI) == 0) {\r
    if (Pxe->sw.EntryPoint < Pxe->sw.Len) {\r
      DEBUG ((EFI_D_NET, "\n!PXE S/W entry point is not valid."));\r
      Status = EFI_UNSUPPORTED;\r
      goto Done;\r
    }\r
\r
    if (Pxe->sw.BusCnt == 0) {\r
      DEBUG ((EFI_D_NET, "\n!PXE.BusCnt is zero."));\r
      Status = EFI_UNSUPPORTED;\r
      goto Done;\r
    }\r
  }\r
\r
  Status = EFI_SUCCESS;\r
  DEBUG ((EFI_D_INFO, "Support(): supported on %p\n", Controller));\r
\r
Done:\r
  gBS->CloseProtocol (\r
        Controller,\r
        &gEfiNetworkInterfaceIdentifierProtocolGuid_31,\r
        This->DriverBindingHandle,\r
        Controller\r
        );\r
\r
  return Status;\r
}\r
\r
/**\r
  Start this driver on ControllerHandle. This service is called by the\r
  EFI boot service ConnectController(). In order to make\r
  drivers as small as possible, there are a few calling restrictions for\r
  this service. ConnectController() must follow these\r
  calling restrictions. If any other agent wishes to call Start() it\r
  must also follow these calling restrictions.\r
\r
  @param  This                 Protocol instance pointer.\r
  @param  ControllerHandle     Handle of device to bind driver to.\r
  @param  RemainingDevicePath  Optional parameter use to pick a specific child\r
                               device to start.\r
\r
  @retval EFI_SUCCESS          This driver is added to ControllerHandle\r
  @retval EFI_DEVICE_ERROR     This driver could not be started due to a device error\r
  @retval other                This driver does not support this device\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SimpleNetworkDriverStart (\r
  IN EFI_DRIVER_BINDING_PROTOCOL    *This,\r
  IN EFI_HANDLE                     Controller,\r
  IN EFI_DEVICE_PATH_PROTOCOL       *RemainingDevicePath\r
  )\r
{\r
  EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL *Nii;\r
  EFI_DEVICE_PATH_PROTOCOL                  *NiiDevicePath;\r
  EFI_STATUS                                Status;\r
  PXE_UNDI                                  *Pxe;\r
  SNP_DRIVER                                *Snp;\r
  VOID                                      *Address;\r
  EFI_HANDLE                                Handle;\r
  UINT8                                     BarIndex;\r
  PXE_STATFLAGS                             InitStatFlags;\r
  EFI_PCI_IO_PROTOCOL                       *PciIo;\r
  EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR         *BarDesc;\r
  \r
  DEBUG ((EFI_D_NET, "\nSnpNotifyNetworkInterfaceIdentifier()  "));\r
\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiDevicePathProtocolGuid,\r
                  (VOID **) &NiiDevicePath,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_BY_DRIVER\r
                  );\r
\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  Status = gBS->LocateDevicePath (\r
                  &gEfiPciIoProtocolGuid,\r
                  &NiiDevicePath,\r
                  &Handle\r
                  );\r
\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  Status = gBS->OpenProtocol (\r
                  Handle,\r
                  &gEfiPciIoProtocolGuid,\r
                  (VOID **) &PciIo,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
  //\r
  // Get the NII interface.\r
  //\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiNetworkInterfaceIdentifierProtocolGuid_31,\r
                  (VOID **) &Nii,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_BY_DRIVER\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    gBS->CloseProtocol (\r
          Controller,\r
          &gEfiDevicePathProtocolGuid,\r
          This->DriverBindingHandle,\r
          Controller\r
          );\r
    return Status;\r
  }\r
\r
  DEBUG ((EFI_D_INFO, "Start(): UNDI3.1 found\n"));\r
\r
  Pxe = (PXE_UNDI *) (UINTN) (Nii->Id);\r
\r
  if (Calc8BitCksum (Pxe, Pxe->hw.Len) != 0) {\r
    DEBUG ((EFI_D_NET, "\n!PXE checksum is not correct.\n"));\r
    goto NiiError;\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_RX_SUPPORTED) != 0) {\r
    //\r
    //  We can get any packets.\r
    //\r
  } else if ((Pxe->hw.Implementation & PXE_ROMID_IMP_BROADCAST_RX_SUPPORTED) != 0) {\r
    //\r
    //  We need to be able to get broadcast packets for DHCP.\r
    //  If we do not have promiscuous support, we must at least have\r
    //  broadcast support or we cannot do DHCP!\r
    //\r
  } else {\r
    DEBUG ((EFI_D_NET, "\nUNDI does not have promiscuous or broadcast support."));\r
    goto NiiError;\r
  }\r
  //\r
  // OK, we like this UNDI, and we know snp is not already there on this handle\r
  // Allocate and initialize a new simple network protocol structure.\r
  //\r
  Status = PciIo->AllocateBuffer (\r
                    PciIo,\r
                    AllocateAnyPages,\r
                    EfiBootServicesData,\r
                    SNP_MEM_PAGES (sizeof (SNP_DRIVER)),\r
                    &Address,\r
                    0\r
                    );\r
\r
  if (Status != EFI_SUCCESS) {\r
    DEBUG ((EFI_D_NET, "\nCould not allocate SNP_DRIVER structure.\n"));\r
    goto NiiError;\r
  }\r
\r
  Snp = (SNP_DRIVER *) (UINTN) Address;\r
\r
  ZeroMem (Snp, sizeof (SNP_DRIVER));\r
\r
  Snp->PciIo      = PciIo;\r
  Snp->Signature  = SNP_DRIVER_SIGNATURE;\r
\r
  EfiInitializeLock (&Snp->Lock, TPL_NOTIFY);\r
\r
  Snp->Snp.Revision       = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;\r
  Snp->Snp.Start          = SnpUndi32Start;\r
  Snp->Snp.Stop           = SnpUndi32Stop;\r
  Snp->Snp.Initialize     = SnpUndi32Initialize;\r
  Snp->Snp.Reset          = SnpUndi32Reset;\r
  Snp->Snp.Shutdown       = SnpUndi32Shutdown;\r
  Snp->Snp.ReceiveFilters = SnpUndi32ReceiveFilters;\r
  Snp->Snp.StationAddress = SnpUndi32StationAddress;\r
  Snp->Snp.Statistics     = SnpUndi32Statistics;\r
  Snp->Snp.MCastIpToMac   = SnpUndi32McastIpToMac;\r
  Snp->Snp.NvData         = SnpUndi32NvData;\r
  Snp->Snp.GetStatus      = SnpUndi32GetStatus;\r
  Snp->Snp.Transmit       = SnpUndi32Transmit;\r
  Snp->Snp.Receive        = SnpUndi32Receive;\r
  Snp->Snp.WaitForPacket  = NULL;\r
\r
  Snp->Snp.Mode           = &Snp->Mode;\r
\r
  Snp->TxRxBufferSize     = 0;\r
  Snp->TxRxBuffer         = NULL;\r
 \r
  if (Nii->Revision >= EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL_REVISION) {\r
  	Snp->IfNum = Nii->IfNum;\r
\r
  } else {\r
    Snp->IfNum = (UINT8) (Nii->IfNum & 0xFF);\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_HW_UNDI) != 0) {\r
    Snp->IsSwUndi             = FALSE;\r
    Snp->IssueUndi32Command   = &IssueHwUndiCommand;\r
  } else {\r
    Snp->IsSwUndi = TRUE;\r
\r
    if ((Pxe->sw.Implementation & PXE_ROMID_IMP_SW_VIRT_ADDR) != 0) {\r
      Snp->IssueUndi32Command = (ISSUE_UNDI32_COMMAND) (UINTN) Pxe->sw.EntryPoint;\r
    } else {\r
      Snp->IssueUndi32Command = (ISSUE_UNDI32_COMMAND) (UINTN) ((UINT8) (UINTN) Pxe + Pxe->sw.EntryPoint);\r
    }\r
  }\r
  //\r
  // Allocate a global CPB and DB buffer for this UNDI interface.\r
  // we do this because:\r
  //\r
  // -UNDI 3.0 wants all the addresses passed to it (even the cpb and db) to be\r
  // within 2GB limit, create them here and map them so that when undi calls\r
  // v2p callback to check if the physical address is < 2gb, we will pass.\r
  //\r
  // -This is not a requirement for 3.1 or later UNDIs but the code looks\r
  // simpler if we use the same cpb, db variables for both old and new undi\r
  // interfaces from all the SNP interface calls (we don't map the buffers\r
  // for the newer undi interfaces though)\r
  // .\r
  // -it is OK to allocate one global set of CPB, DB pair for each UNDI\r
  // interface as EFI does not multi-task and so SNP will not be re-entered!\r
  //\r
  Status = PciIo->AllocateBuffer (\r
                    PciIo,\r
                    AllocateAnyPages,\r
                    EfiBootServicesData,\r
                    SNP_MEM_PAGES (4096),\r
                    &Address,\r
                    0\r
                    );\r
\r
  if (Status != EFI_SUCCESS) {\r
    DEBUG ((EFI_D_NET, "\nCould not allocate CPB and DB structures.\n"));\r
    goto Error_DeleteSNP;\r
  }\r
\r
  Snp->Cpb  = (VOID *) (UINTN) Address;\r
  Snp->Db   = (VOID *) ((UINTN) Address + 2048);\r
\r
  //\r
  // Find the correct BAR to do IO.\r
  //\r
  // Enumerate through the PCI BARs for the device to determine which one is\r
  // the IO BAR.  Save the index of the BAR into the adapter info structure.\r
  // for regular 32bit BARs, 0 is memory mapped, 1 is io mapped\r
  //\r
  Snp->MemoryBarIndex = 0;\r
  Snp->IoBarIndex     = 1;\r
  for (BarIndex = 0; BarIndex < PCI_MAX_BAR; BarIndex++) {\r
    Status = PciIo->GetBarAttributes (\r
                      PciIo,\r
                      BarIndex,\r
                      NULL,\r
                      (VOID**) &BarDesc\r
                      );\r
    if (Status == EFI_UNSUPPORTED) {\r
      continue;\r
    } else if (EFI_ERROR (Status)) {\r
      goto Error_DeleteSNP;\r
    }\r
\r
    if (BarDesc->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {\r
      Snp->MemoryBarIndex = BarIndex;\r
    } else if (BarDesc->ResType == ACPI_ADDRESS_SPACE_TYPE_IO) {\r
      Snp->IoBarIndex = BarIndex;\r
    }\r
\r
    FreePool (BarDesc);\r
  }\r
\r
  Status = PxeStart (Snp);\r
\r
  if (Status != EFI_SUCCESS) {\r
    goto Error_DeleteSNP;\r
  }\r
\r
  Snp->Cdb.OpCode     = PXE_OPCODE_GET_INIT_INFO;\r
  Snp->Cdb.OpFlags    = PXE_OPFLAGS_NOT_USED;\r
\r
  Snp->Cdb.CPBsize    = PXE_CPBSIZE_NOT_USED;\r
  Snp->Cdb.CPBaddr    = PXE_DBADDR_NOT_USED;\r
\r
  Snp->Cdb.DBsize     = (UINT16) sizeof (Snp->InitInfo);\r
  Snp->Cdb.DBaddr     = (UINT64)(UINTN) (&Snp->InitInfo);\r
\r
  Snp->Cdb.StatCode   = PXE_STATCODE_INITIALIZE;\r
  Snp->Cdb.StatFlags  = PXE_STATFLAGS_INITIALIZE;\r
\r
  Snp->Cdb.IFnum      = Snp->IfNum;\r
  Snp->Cdb.Control    = PXE_CONTROL_LAST_CDB_IN_LIST;\r
\r
  DEBUG ((EFI_D_NET, "\nSnp->undi.get_init_info()  "));\r
\r
  (*Snp->IssueUndi32Command) ((UINT64)(UINTN) &Snp->Cdb);\r
\r
  //\r
  // Save the INIT Stat Code...\r
  //\r
  InitStatFlags = Snp->Cdb.StatFlags;\r
\r
  if (Snp->Cdb.StatCode != PXE_STATCODE_SUCCESS) {\r
    DEBUG ((EFI_D_NET, "\nSnp->undi.init_info()  %xh:%xh\n", Snp->Cdb.StatFlags, Snp->Cdb.StatCode));\r
    PxeStop (Snp);\r
    goto Error_DeleteSNP;\r
  }\r
\r
  //\r
  //  Initialize simple network protocol mode structure\r
  //\r
  Snp->Mode.State               = EfiSimpleNetworkStopped;\r
  Snp->Mode.HwAddressSize       = Snp->InitInfo.HWaddrLen;\r
  Snp->Mode.MediaHeaderSize     = Snp->InitInfo.MediaHeaderLen;\r
  Snp->Mode.MaxPacketSize       = Snp->InitInfo.FrameDataLen;\r
  Snp->Mode.NvRamAccessSize     = Snp->InitInfo.NvWidth;\r
  Snp->Mode.NvRamSize           = Snp->InitInfo.NvCount * Snp->Mode.NvRamAccessSize;\r
  Snp->Mode.IfType              = Snp->InitInfo.IFtype;\r
  Snp->Mode.MaxMCastFilterCount = Snp->InitInfo.MCastFilterCnt;\r
  Snp->Mode.MCastFilterCount    = 0;\r
\r
  switch (InitStatFlags & PXE_STATFLAGS_CABLE_DETECT_MASK) {\r
  case PXE_STATFLAGS_CABLE_DETECT_SUPPORTED:\r
    Snp->Mode.MediaPresentSupported = TRUE;\r
    break;\r
\r
  case PXE_STATFLAGS_CABLE_DETECT_NOT_SUPPORTED:\r
  default:\r
    Snp->Mode.MediaPresentSupported = FALSE;\r
  }\r
\r
  switch (InitStatFlags & PXE_STATFLAGS_GET_STATUS_NO_MEDIA_MASK) {\r
  case PXE_STATFLAGS_GET_STATUS_NO_MEDIA_SUPPORTED:\r
    Snp->MediaStatusSupported = TRUE;\r
    break;\r
\r
  case PXE_STATFLAGS_GET_STATUS_NO_MEDIA_NOT_SUPPORTED:\r
  default:\r
    Snp->MediaStatusSupported = FALSE;\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_STATION_ADDR_SETTABLE) != 0) {\r
    Snp->Mode.MacAddressChangeable = TRUE;\r
  } else {\r
    Snp->Mode.MacAddressChangeable = FALSE;\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_MULTI_FRAME_SUPPORTED) != 0) {\r
    Snp->Mode.MultipleTxSupported = TRUE;\r
  } else {\r
    Snp->Mode.MultipleTxSupported = FALSE;\r
  }\r
\r
  Snp->Mode.ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST;\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_MULTICAST_RX_SUPPORTED) != 0) {\r
    Snp->Mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;\r
\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_RX_SUPPORTED) != 0) {\r
    Snp->Mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;\r
\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_BROADCAST_RX_SUPPORTED) != 0) {\r
    Snp->Mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST;\r
\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_FILTERED_MULTICAST_RX_SUPPORTED) != 0) {\r
    Snp->Mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST;\r
\r
  }\r
\r
  if ((Pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_MULTICAST_RX_SUPPORTED) != 0) {\r
    Snp->Mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;\r
\r
  }\r
\r
  Snp->Mode.ReceiveFilterSetting = 0;\r
\r
  //\r
  //  need to get the station address to save in the mode structure. we need to\r
  // initialize the UNDI first for this.\r
  //\r
  Snp->TxRxBufferSize = Snp->InitInfo.MemoryRequired;\r
  Status              = PxeInit (Snp, PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE);\r
\r
  if (EFI_ERROR (Status)) {\r
    PxeStop (Snp);\r
    goto Error_DeleteSNP;\r
  }\r
\r
  Status = PxeGetStnAddr (Snp);\r
\r
  if (Status != EFI_SUCCESS) {\r
    DEBUG ((EFI_D_ERROR, "\nSnp->undi.get_station_addr() failed.\n"));\r
    PxeShutdown (Snp);\r
    PxeStop (Snp);\r
    goto Error_DeleteSNP;\r
  }\r
\r
  Snp->Mode.MediaPresent = FALSE;\r
\r
  //\r
  // We should not leave UNDI started and initialized here. this DriverStart()\r
  // routine must only find and attach the SNP interface to UNDI layer that it\r
  // finds on the given handle!\r
  // The UNDI layer will be started when upper layers call Snp->start.\r
  // How ever, this DriverStart() must fill up the snp mode structure which\r
  // contains the MAC address of the NIC. For this reason we started and\r
  // initialized UNDI here, now we are done, do a shutdown and stop of the\r
  // UNDI interface!\r
  //\r
  PxeShutdown (Snp);\r
  PxeStop (Snp);\r
\r
  //\r
  // Create EXIT_BOOT_SERIVES Event\r
  //\r
  Status = gBS->CreateEventEx (\r
                  EVT_NOTIFY_SIGNAL,\r
                  TPL_NOTIFY,\r
                  SnpNotifyExitBootServices,\r
                  Snp,\r
                  &gEfiEventExitBootServicesGuid,\r
                  &Snp->ExitBootServicesEvent\r
                  );\r
  if (EFI_ERROR (Status)) {\r
    goto Error_DeleteSNP;\r
  }\r
\r
  //\r
  //  add SNP to the undi handle\r
  //\r
  Status = gBS->InstallProtocolInterface (\r
                  &Controller,\r
                  &gEfiSimpleNetworkProtocolGuid,\r
                  EFI_NATIVE_INTERFACE,\r
                  &(Snp->Snp)\r
                  );\r
\r
  if (!EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  PciIo->FreeBuffer (\r
           PciIo,\r
           SNP_MEM_PAGES (4096),\r
           Snp->Cpb\r
           );\r
\r
Error_DeleteSNP:\r
\r
  PciIo->FreeBuffer (\r
           PciIo,\r
           SNP_MEM_PAGES (sizeof (SNP_DRIVER)),\r
           Snp\r
           );\r
NiiError:\r
  gBS->CloseProtocol (\r
        Controller,\r
        &gEfiNetworkInterfaceIdentifierProtocolGuid_31,\r
        This->DriverBindingHandle,\r
        Controller\r
        );\r
\r
  gBS->CloseProtocol (\r
        Controller,\r
        &gEfiDevicePathProtocolGuid,\r
        This->DriverBindingHandle,\r
        Controller\r
        );\r
\r
  //\r
  // If we got here that means we are in error state.\r
  //\r
  if (!EFI_ERROR (Status)) {\r
    Status = EFI_DEVICE_ERROR;\r
  }\r
\r
  return Status;\r
}\r
\r
/**\r
  Stop this driver on ControllerHandle. This service is called by the\r
  EFI boot service DisconnectController(). In order to\r
  make drivers as small as possible, there are a few calling\r
  restrictions for this service. DisconnectController()\r
  must follow these calling restrictions. If any other agent wishes\r
  to call Stop() it must also follow these calling restrictions.\r
\r
  @param  This              Protocol instance pointer.\r
  @param  ControllerHandle  Handle of device to stop driver on\r
  @param  NumberOfChildren  Number of Handles in ChildHandleBuffer. If number of\r
                            children is zero stop the entire bus driver.\r
  @param  ChildHandleBuffer List of Child Handles to Stop.\r
\r
  @retval EFI_SUCCESS       This driver is removed ControllerHandle\r
  @retval other             This driver was not removed from this device\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SimpleNetworkDriverStop (\r
  IN  EFI_DRIVER_BINDING_PROTOCOL    *This,\r
  IN  EFI_HANDLE                     Controller,\r
  IN  UINTN                          NumberOfChildren,\r
  IN  EFI_HANDLE                     *ChildHandleBuffer\r
  )\r
{\r
  EFI_STATUS                  Status;\r
  EFI_SIMPLE_NETWORK_PROTOCOL *SnpProtocol;\r
  SNP_DRIVER                  *Snp;\r
  EFI_PCI_IO_PROTOCOL         *PciIo;\r
\r
  //\r
  // Get our context back.\r
  //\r
  Status = gBS->OpenProtocol (\r
                  Controller,\r
                  &gEfiSimpleNetworkProtocolGuid,\r
                  (VOID **) &SnpProtocol,\r
                  This->DriverBindingHandle,\r
                  Controller,\r
                  EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
                  );\r
\r
  if (EFI_ERROR (Status)) {\r
    return EFI_UNSUPPORTED;\r
  }\r
\r
  Snp = EFI_SIMPLE_NETWORK_DEV_FROM_THIS (SnpProtocol);\r
\r
  Status = gBS->UninstallProtocolInterface (\r
                  Controller,\r
                  &gEfiSimpleNetworkProtocolGuid,\r
                  &Snp->Snp\r
                  );\r
\r
  if (EFI_ERROR (Status)) {\r
    return Status;\r
  }\r
\r
  //\r
  // Close EXIT_BOOT_SERIVES Event\r
  //\r
  gBS->CloseEvent (Snp->ExitBootServicesEvent);\r
\r
  Status = gBS->CloseProtocol (\r
                  Controller,\r
                  &gEfiNetworkInterfaceIdentifierProtocolGuid_31,\r
                  This->DriverBindingHandle,\r
                  Controller\r
                  );\r
\r
  Status = gBS->CloseProtocol (\r
                  Controller,\r
                  &gEfiDevicePathProtocolGuid,\r
                  This->DriverBindingHandle,\r
                  Controller\r
                  );\r
\r
  PxeShutdown (Snp);\r
  PxeStop (Snp);\r
\r
  PciIo = Snp->PciIo;\r
  PciIo->FreeBuffer (\r
           PciIo,\r
           SNP_MEM_PAGES (4096),\r
           Snp->Cpb\r
           );\r
\r
  PciIo->FreeBuffer (\r
           PciIo,\r
           SNP_MEM_PAGES (sizeof (SNP_DRIVER)),\r
           Snp\r
           );\r
\r
  return Status;\r
}\r
\r
//\r
// Simple Network Protocol Driver Global Variables\r
//\r
EFI_DRIVER_BINDING_PROTOCOL gSimpleNetworkDriverBinding = {\r
  SimpleNetworkDriverSupported,\r
  SimpleNetworkDriverStart,\r
  SimpleNetworkDriverStop,\r
  0xa,\r
  NULL,\r
  NULL\r
};\r
\r
/**\r
  The SNP driver entry point.\r
\r
  @param ImageHandle       The driver image handle.\r
  @param SystemTable       The system table.\r
\r
  @retval EFI_SUCEESS      Initialization routine has found UNDI hardware,\r
                           loaded it's ROM, and installed a notify event for\r
                           the Network Indentifier Interface Protocol\r
                           successfully.\r
  @retval Other            Return value from HandleProtocol for\r
                           DeviceIoProtocol or LoadedImageProtocol\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
InitializeSnpNiiDriver (\r
  IN EFI_HANDLE       ImageHandle,\r
  IN EFI_SYSTEM_TABLE *SystemTable\r
  )\r
{\r
  return EfiLibInstallDriverBindingComponentName2 (\r
           ImageHandle,\r
           SystemTable,\r
           &gSimpleNetworkDriverBinding,\r
           ImageHandle,\r
           &gSimpleNetworkComponentName,\r
           &gSimpleNetworkComponentName2\r
           );\r
}\r