]> git.proxmox.com Git - mirror_edk2.git/blame - NetworkPkg/UefiPxeBcDxe/PxeBcImpl.c
projects / mirror_edk2.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Nt32Pkg: Fix SnpNt32 GetStatus bug
[mirror_edk2.git] / NetworkPkg / UefiPxeBcDxe / PxeBcImpl.c
CommitLineData
a3bcde70
HT		 1/** @file\r
2 This implementation of EFI_PXE_BASE_CODE_PROTOCOL and EFI_LOAD_FILE_PROTOCOL.\r
3\r
e29fc502 4 Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>\r
a3bcde70
HT		 5\r
6 This program and the accompanying materials\r
7 are licensed and made available under the terms and conditions of the BSD License\r
8 which accompanies this distribution. The full text of the license may be found at\r
9 http://opensource.org/licenses/bsd-license.php.\r
10\r
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
13\r
14**/\r
15\r
16#include "PxeBcImpl.h"\r
17\r
18\r
19/**\r
20 Enables the use of the PXE Base Code Protocol functions.\r
21\r
22 This function enables the use of the PXE Base Code Protocol functions. If the\r
23 Started field of the EFI_PXE_BASE_CODE_MODE structure is already TRUE, then\r
24 EFI_ALREADY_STARTED will be returned. If UseIpv6 is TRUE, then IPv6 formatted\r
25 addresses will be used in this session. If UseIpv6 is FALSE, then IPv4 formatted\r
26 addresses will be used in this session. If UseIpv6 is TRUE, and the Ipv6Supported\r
27 field of the EFI_PXE_BASE_CODE_MODE structure is FALSE, then EFI_UNSUPPORTED will\r
28 be returned. If there is not enough memory or other resources to start the PXE\r
29 Base Code Protocol, then EFI_OUT_OF_RESOURCES will be returned. Otherwise, the\r
30 PXE Base Code Protocol will be started.\r
31\r
32 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
33 @param[in] UseIpv6 Specifies the type of IP addresses that are to be\r
34 used during the session that is being started.\r
35 Set to TRUE for IPv6, and FALSE for IPv4.\r
36\r
37 @retval EFI_SUCCESS The PXE Base Code Protocol was started.\r
38 @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.\r
39 @retval EFI_UNSUPPORTED UseIpv6 is TRUE, but the Ipv6Supported field of the\r
40 EFI_PXE_BASE_CODE_MODE structure is FALSE.\r
41 @retval EFI_ALREADY_STARTED The PXE Base Code Protocol is already in the started state.\r
42 @retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid\r
43 EFI_PXE_BASE_CODE_PROTOCOL structure.\r
44 @retval EFI_OUT_OF_RESOURCES Could not allocate enough memory or other resources to start the\r
45 PXE Base Code Protocol.\r
46\r
47**/\r
48EFI_STATUS\r
49EFIAPI\r
50EfiPxeBcStart (\r
51 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
52 IN BOOLEAN UseIpv6\r
53 )\r
54{\r
55 PXEBC_PRIVATE_DATA *Private;\r
56 EFI_PXE_BASE_CODE_MODE *Mode;\r
57 UINTN Index;\r
58 EFI_STATUS Status;\r
59\r
60 if (This == NULL) {\r
61 return EFI_INVALID_PARAMETER;\r
62 }\r
63\r
64 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
65 Mode = Private->PxeBc.Mode;\r
66\r
67 if (Mode->Started) {\r
68 return EFI_ALREADY_STARTED;\r
69 }\r
70\r
71 //\r
72 // Detect whether using IPv6 or not, and set it into mode data.\r
73 //\r
74 if (UseIpv6 && Mode->Ipv6Available && Mode->Ipv6Supported && Private->Ip6Nic != NULL) {\r
75 Mode->UsingIpv6 = TRUE;\r
76 } else if (!UseIpv6 && Private->Ip4Nic != NULL) {\r
77 Mode->UsingIpv6 = FALSE;\r
78 } else {\r
79 return EFI_UNSUPPORTED;\r
80 }\r
81\r
82 if (Mode->UsingIpv6) {\r
83 AsciiPrint ("\n>>Start PXE over IPv6");\r
ce280355 84 //\r
85 // Configure udp6 instance to receive data.\r
86 //\r
87 Status = Private->Udp6Read->Configure (\r
88 Private->Udp6Read,\r
89 &Private->Udp6CfgData\r
90 );\r
91 if (EFI_ERROR (Status)) {\r
92 goto ON_ERROR;\r
93 }\r
94 \r
a3bcde70
HT		 95 //\r
96 // Configure block size for TFTP as a default value to handle all link layers.\r
97 //\r
98 Private->BlockSize = (UINTN) (Private->Ip6MaxPacketSize -\r
99 PXEBC_DEFAULT_UDP_OVERHEAD_SIZE - PXEBC_DEFAULT_TFTP_OVERHEAD_SIZE);\r
100\r
101 //\r
102 // PXE over IPv6 starts here, initialize the fields and list header.\r
103 //\r
104 Private->Ip6Policy = PXEBC_IP6_POLICY_MAX;\r
105 Private->ProxyOffer.Dhcp6.Packet.Offer.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;\r
106 Private->DhcpAck.Dhcp6.Packet.Ack.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;\r
107 Private->PxeReply.Dhcp6.Packet.Ack.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;\r
108\r
109 for (Index = 0; Index < PXEBC_OFFER_MAX_NUM; Index++) {\r
110 Private->OfferBuffer[Index].Dhcp6.Packet.Offer.Size = PXEBC_DHCP6_PACKET_MAX_SIZE;\r
111 }\r
112\r
113 //\r
114 // Create event and set status for token to capture ICMP6 error message.\r
115 //\r
116 Private->Icmp6Token.Status = EFI_NOT_READY;\r
117 Status = gBS->CreateEvent (\r
118 EVT_NOTIFY_SIGNAL,\r
119 TPL_NOTIFY,\r
120 PxeBcIcmp6ErrorUpdate,\r
121 Private,\r
122 &Private->Icmp6Token.Event\r
123 );\r
124 if (EFI_ERROR (Status)) {\r
125 goto ON_ERROR;\r
126 }\r
ae97201c
FS		 127\r
128 //\r
129 // Set Ip6 policy to Automatic to start the IP6 router discovery.\r
130 //\r
131 Status = PxeBcSetIp6Policy (Private);\r
132 if (EFI_ERROR (Status)) {\r
133 goto ON_ERROR;\r
134 }\r
a3bcde70
HT		 135 } else {\r
136 AsciiPrint ("\n>>Start PXE over IPv4");\r
ce280355 137 //\r
138 // Configure udp4 instance to receive data.\r
139 //\r
140 Status = Private->Udp4Read->Configure (\r
141 Private->Udp4Read,\r
142 &Private->Udp4CfgData\r
143 );\r
144 if (EFI_ERROR (Status)) {\r
145 goto ON_ERROR;\r
146 }\r
147 \r
a3bcde70
HT		 148 //\r
149 // Configure block size for TFTP as a default value to handle all link layers.\r
150 //\r
151 Private->BlockSize = (UINTN) (Private->Ip4MaxPacketSize -\r
152 PXEBC_DEFAULT_UDP_OVERHEAD_SIZE - PXEBC_DEFAULT_TFTP_OVERHEAD_SIZE);\r
153\r
154 //\r
155 // PXE over IPv4 starts here, initialize the fields.\r
156 //\r
157 Private->ProxyOffer.Dhcp4.Packet.Offer.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;\r
158 Private->DhcpAck.Dhcp4.Packet.Ack.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;\r
159 Private->PxeReply.Dhcp4.Packet.Ack.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;\r
160\r
161 for (Index = 0; Index < PXEBC_OFFER_MAX_NUM; Index++) {\r
162 Private->OfferBuffer[Index].Dhcp4.Packet.Offer.Size = PXEBC_DHCP4_PACKET_MAX_SIZE;\r
163 }\r
164\r
165 PxeBcSeedDhcp4Packet (&Private->SeedPacket, Private->Udp4Read);\r
166\r
167 //\r
168 // Create the event for Arp cache update.\r
169 //\r
170 Status = gBS->CreateEvent (\r
171 EVT_TIMER | EVT_NOTIFY_SIGNAL,\r
172 TPL_CALLBACK,\r
173 PxeBcArpCacheUpdate,\r
174 Private,\r
175 &Private->ArpUpdateEvent\r
176 );\r
177 if (EFI_ERROR (Status)) {\r
178 goto ON_ERROR;\r
179 }\r
180\r
181 //\r
182 // Start a periodic timer by second to update Arp cache.\r
183 //\r
184 Status = gBS->SetTimer (\r
185 Private->ArpUpdateEvent,\r
186 TimerPeriodic,\r
187 TICKS_PER_SECOND\r
188 );\r
189 if (EFI_ERROR (Status)) {\r
190 goto ON_ERROR;\r
191 }\r
192\r
193 //\r
194 // Create event and set status for token to capture ICMP error message.\r
195 //\r
196 Private->Icmp6Token.Status = EFI_NOT_READY;\r
197 Status = gBS->CreateEvent (\r
198 EVT_NOTIFY_SIGNAL,\r
199 TPL_NOTIFY,\r
200 PxeBcIcmpErrorUpdate,\r
201 Private,\r
202 &Private->IcmpToken.Event\r
203 );\r
204 if (EFI_ERROR (Status)) {\r
205 goto ON_ERROR;\r
206 }\r
ac99793b
ZL		 207\r
208 //\r
209 //DHCP4 service allows only one of its children to be configured in \r
210 //the active state, If the DHCP4 D.O.R.A started by IP4 auto \r
211 //configuration and has not been completed, the Dhcp4 state machine \r
212 //will not be in the right state for the PXE to start a new round D.O.R.A. \r
213 //so we need to switch it's policy to static.\r
214 //\r
215 Status = PxeBcSetIp4Policy (Private);\r
216 if (EFI_ERROR (Status)) {\r
217 goto ON_ERROR;\r
218 }\r
a3bcde70
HT		 219 }\r
220\r
221 //\r
222 // If PcdTftpBlockSize is set to non-zero, override the default value.\r
223 //\r
224 if (PcdGet64 (PcdTftpBlockSize) != 0) {\r
225 Private->BlockSize = (UINTN) PcdGet64 (PcdTftpBlockSize);\r
226 }\r
227\r
228 //\r
229 // Create event for UdpRead/UdpWrite timeout since they are both blocking API.\r
230 //\r
231 Status = gBS->CreateEvent (\r
232 EVT_TIMER,\r
233 TPL_CALLBACK,\r
234 NULL,\r
235 NULL,\r
236 &Private->UdpTimeOutEvent\r
237 );\r
238 if (EFI_ERROR (Status)) {\r
239 goto ON_ERROR;\r
240 }\r
241\r
242 Private->IsAddressOk = FALSE;\r
243 Mode->Started = TRUE;\r
244\r
245 return EFI_SUCCESS;\r
246\r
247ON_ERROR:\r
248 if (Mode->UsingIpv6) {\r
249 if (Private->Icmp6Token.Event != NULL) {\r
250 gBS->CloseEvent (Private->Icmp6Token.Event);\r
251 Private->Icmp6Token.Event = NULL;\r
252 }\r
253 Private->Udp6Read->Configure (Private->Udp6Read, NULL);\r
254 Private->Ip6->Configure (Private->Ip6, NULL);\r
255 } else {\r
256 if (Private->ArpUpdateEvent != NULL) {\r
257 gBS->CloseEvent (Private->ArpUpdateEvent);\r
258 Private->ArpUpdateEvent = NULL;\r
259 }\r
260 if (Private->IcmpToken.Event != NULL) {\r
261 gBS->CloseEvent (Private->IcmpToken.Event);\r
262 Private->IcmpToken.Event = NULL;\r
263 }\r
264 Private->Udp4Read->Configure (Private->Udp4Read, NULL);\r
265 Private->Ip4->Configure (Private->Ip4, NULL);\r
266 }\r
267 return Status;\r
268}\r
269\r
270\r
271/**\r
272 Disable the use of the PXE Base Code Protocol functions.\r
273\r
274 This function stops all activity on the network device. All the resources allocated\r
275 in Start() are released, the Started field of the EFI_PXE_BASE_CODE_MODE structure is\r
276 set to FALSE, and EFI_SUCCESS is returned. If the Started field of the EFI_PXE_BASE_CODE_MODE\r
277 structure is already FALSE, then EFI_NOT_STARTED will be returned.\r
278\r
279 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
280\r
281 @retval EFI_SUCCESS The PXE Base Code Protocol was stopped.\r
282 @retval EFI_NOT_STARTED The PXE Base Code Protocol is already in the stopped state.\r
283 @retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid\r
284 EFI_PXE_BASE_CODE_PROTOCOL structure.\r
285 @retval Others\r
286\r
287**/\r
288EFI_STATUS\r
289EFIAPI\r
290EfiPxeBcStop (\r
291 IN EFI_PXE_BASE_CODE_PROTOCOL *This\r
292 )\r
293{\r
294 PXEBC_PRIVATE_DATA *Private;\r
295 EFI_PXE_BASE_CODE_MODE *Mode;\r
296 BOOLEAN Ipv6Supported;\r
297 BOOLEAN Ipv6Available;\r
298\r
299 if (This == NULL) {\r
300 return EFI_INVALID_PARAMETER;\r
301 }\r
302\r
303 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
304 Mode = Private->PxeBc.Mode;\r
305 Ipv6Supported = Mode->Ipv6Supported;\r
306 Ipv6Available = Mode->Ipv6Available;\r
307\r
308 if (!Mode->Started) {\r
309 return EFI_NOT_STARTED;\r
310 }\r
311\r
312 if (Mode->UsingIpv6) {\r
313 //\r
314 // Configure all the instances for IPv6 as NULL.\r
315 //\r
316 ZeroMem (&Private->Udp6CfgData.StationAddress, sizeof (EFI_IPv6_ADDRESS));\r
317 ZeroMem (&Private->Ip6CfgData.StationAddress, sizeof (EFI_IPv6_ADDRESS));\r
318 Private->Dhcp6->Stop (Private->Dhcp6);\r
319 Private->Dhcp6->Configure (Private->Dhcp6, NULL);\r
320 Private->Udp6Write->Configure (Private->Udp6Write, NULL);\r
321 Private->Udp6Read->Groups (Private->Udp6Read, FALSE, NULL);\r
322 Private->Udp6Read->Configure (Private->Udp6Read, NULL);\r
323 Private->Ip6->Cancel (Private->Ip6, &Private->Icmp6Token);\r
324 Private->Ip6->Configure (Private->Ip6, NULL);\r
325 PxeBcUnregisterIp6Address (Private);\r
326 if (Private->Icmp6Token.Event != NULL) {\r
327 gBS->CloseEvent (Private->Icmp6Token.Event);\r
328 Private->Icmp6Token.Event = NULL;\r
329 }\r
330 if (Private->Dhcp6Request != NULL) {\r
331 FreePool (Private->Dhcp6Request);\r
332 Private->Dhcp6Request = NULL;\r
333 }\r
334 if (Private->BootFileName != NULL) {\r
335 FreePool (Private->BootFileName);\r
336 Private->BootFileName = NULL;\r
337 }\r
338 } else {\r
339 //\r
340 // Configure all the instances for IPv4 as NULL.\r
341 //\r
342 ZeroMem (&Private->Udp4CfgData.StationAddress, sizeof (EFI_IPv4_ADDRESS));\r
343 ZeroMem (&Private->Udp4CfgData.SubnetMask, sizeof (EFI_IPv4_ADDRESS));\r
344 ZeroMem (&Private->Ip4CfgData.StationAddress, sizeof (EFI_IPv4_ADDRESS));\r
345 ZeroMem (&Private->Ip4CfgData.SubnetMask, sizeof (EFI_IPv4_ADDRESS));\r
346 Private->Dhcp4->Stop (Private->Dhcp4);\r
347 Private->Dhcp4->Configure (Private->Dhcp4, NULL);\r
348 Private->Udp4Write->Configure (Private->Udp4Write, NULL);\r
349 Private->Udp4Read->Groups (Private->Udp4Read, FALSE, NULL);\r
350 Private->Udp4Read->Configure (Private->Udp4Read, NULL);\r
351 Private->Ip4->Cancel (Private->Ip4, &Private->IcmpToken);\r
352 Private->Ip4->Configure (Private->Ip4, NULL);\r
353 if (Private->ArpUpdateEvent != NULL) {\r
354 gBS->CloseEvent (Private->ArpUpdateEvent);\r
355 Private->ArpUpdateEvent = NULL;\r
356 }\r
357 if (Private->IcmpToken.Event != NULL) {\r
358 gBS->CloseEvent (Private->IcmpToken.Event);\r
359 Private->IcmpToken.Event = NULL;\r
360 }\r
e29fc502 361 Private->BootFileName = NULL;\r
a3bcde70
HT		 362 }\r
363\r
364 gBS->CloseEvent (Private->UdpTimeOutEvent);\r
365 Private->CurSrcPort = 0;\r
366 Private->BootFileSize = 0;\r
129b8b09 367 Private->SolicitTimes = 0;\r
368 Private->ElapsedTime = 0;\r
620f846f
FS		 369 ZeroMem (&Private->StationIp, sizeof (EFI_IP_ADDRESS));\r
370 ZeroMem (&Private->SubnetMask, sizeof (EFI_IP_ADDRESS));\r
371 ZeroMem (&Private->GatewayIp, sizeof (EFI_IP_ADDRESS));\r
372 ZeroMem (&Private->ServerIp, sizeof (EFI_IP_ADDRESS));\r
a3bcde70
HT		 373\r
374 //\r
375 // Reset the mode data.\r
376 //\r
377 ZeroMem (Mode, sizeof (EFI_PXE_BASE_CODE_MODE));\r
378 Mode->Ipv6Available = Ipv6Available;\r
379 Mode->Ipv6Supported = Ipv6Supported;\r
380 Mode->AutoArp = TRUE;\r
381 Mode->TTL = DEFAULT_TTL;\r
382 Mode->ToS = DEFAULT_ToS;\r
383\r
384 return EFI_SUCCESS;\r
385}\r
386\r
387\r
388/**\r
389 Attempts to complete a DHCPv4 D.O.R.A. (discover / offer / request / acknowledge) or DHCPv6\r
390 S.A.R.R (solicit / advertise / request / reply) sequence.\r
391\r
392 If SortOffers is TRUE, then the cached DHCP offer packets will be sorted before\r
393 they are tried. If SortOffers is FALSE, then the cached DHCP offer packets will\r
394 be tried in the order in which they are received. Please see the Preboot Execution\r
395 Environment (PXE) Specification and Unified Extensible Firmware Interface (UEFI)\r
396 Specification for additional details on the implementation of DHCP.\r
397 If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,\r
398 then the DHCP sequence will be stopped and EFI_ABORTED will be returned.\r
399\r
400 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
401 @param[in] SortOffers TRUE if the offers received should be sorted. Set to FALSE to\r
402 try the offers in the order that they are received.\r
403\r
404 @retval EFI_SUCCESS Valid DHCP has completed.\r
405 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
406 @retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid\r
407 EFI_PXE_BASE_CODE_PROTOCOL structure.\r
408 @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.\r
409 @retval EFI_OUT_OF_RESOURCES Could not allocate enough memory to complete the DHCP Protocol.\r
410 @retval EFI_ABORTED The callback function aborted the DHCP Protocol.\r
411 @retval EFI_TIMEOUT The DHCP Protocol timed out.\r
412 @retval EFI_ICMP_ERROR An ICMP error packet was received during the DHCP session.\r
413 @retval EFI_NO_RESPONSE Valid PXE offer was not received.\r
414\r
415**/\r
416EFI_STATUS\r
417EFIAPI\r
418EfiPxeBcDhcp (\r
419 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
420 IN BOOLEAN SortOffers\r
421 )\r
422{\r
423 PXEBC_PRIVATE_DATA *Private;\r
424 EFI_PXE_BASE_CODE_MODE *Mode;\r
425 EFI_STATUS Status;\r
426 EFI_PXE_BASE_CODE_IP_FILTER IpFilter;\r
427\r
428 if (This == NULL) {\r
429 return EFI_INVALID_PARAMETER;\r
430 }\r
431\r
432 Status = EFI_SUCCESS;\r
433 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
434 Mode = Private->PxeBc.Mode;\r
435 Mode->IcmpErrorReceived = FALSE;\r
436 Private->Function = EFI_PXE_BASE_CODE_FUNCTION_DHCP;\r
437 Private->IsOfferSorted = SortOffers;\r
4496ff75 438 Private->SolicitTimes = 0;\r
439 Private->ElapsedTime = 0;\r
a3bcde70
HT		 440\r
441 if (!Mode->Started) {\r
442 return EFI_NOT_STARTED;\r
443 }\r
444\r
445 if (Mode->UsingIpv6) {\r
446\r
447 //\r
448 // Stop Udp6Read instance\r
449 //\r
450 Private->Udp6Read->Configure (Private->Udp6Read, NULL);\r
451\r
452 //\r
453 // Start S.A.R.R. process to get a IPv6 address and other boot information.\r
454 //\r
455 Status = PxeBcDhcp6Sarr (Private, Private->Dhcp6);\r
456 } else {\r
457\r
458 //\r
459 // Stop Udp4Read instance\r
460 //\r
461 Private->Udp4Read->Configure (Private->Udp4Read, NULL);\r
462\r
463 //\r
464 // Start D.O.R.A. process to get a IPv4 address and other boot information.\r
465 //\r
466 Status = PxeBcDhcp4Dora (Private, Private->Dhcp4);\r
467 }\r
1ac9cb8a 468\r
469 //\r
470 // Reconfigure the UDP instance with the default configuration.\r
471 //\r
357af285 472 if (Mode->UsingIpv6) {\r
473 Private->Udp6Read->Configure (Private->Udp6Read, &Private->Udp6CfgData);\r
474 } else {\r
475 Private->Udp4Read->Configure (Private->Udp4Read, &Private->Udp4CfgData);\r
476 }\r
a3bcde70
HT		 477 //\r
478 // Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP\r
479 // receive filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.\r
480 //\r
481 ZeroMem(&IpFilter, sizeof (EFI_PXE_BASE_CODE_IP_FILTER));\r
482 IpFilter.Filters = EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP;\r
483 This->SetIpFilter (This, &IpFilter);\r
484\r
485 return Status;\r
486}\r
487\r
488\r
489/**\r
490 Attempts to complete the PXE Boot Server and/or boot image discovery sequence.\r
491\r
492 This function attempts to complete the PXE Boot Server and/or boot image discovery\r
493 sequence. If this sequence is completed, then EFI_SUCCESS is returned, and the\r
494 PxeDiscoverValid, PxeDiscover, PxeReplyReceived, and PxeReply fields of the\r
495 EFI_PXE_BASE_CODE_MODE structure are filled in. If UseBis is TRUE, then the\r
496 PxeBisReplyReceived and PxeBisReply fields of the EFI_PXE_BASE_CODE_MODE structure\r
497 will also be filled in. If UseBis is FALSE, then PxeBisReplyValid will be set to FALSE.\r
498 In the structure referenced by parameter Info, the PXE Boot Server list, SrvList[],\r
499 has two uses: It is the Boot Server IP address list used for unicast discovery\r
500 (if the UseUCast field is TRUE), and it is the list used for Boot Server verification\r
501 (if the MustUseList field is TRUE). Also, if the MustUseList field in that structure\r
502 is TRUE and the AcceptAnyResponse field in the SrvList[] array is TRUE, any Boot\r
503 Server reply of that type will be accepted. If the AcceptAnyResponse field is\r
504 FALSE, only responses from Boot Servers with matching IP addresses will be accepted.\r
505 This function can take at least 10 seconds to timeout and return control to the\r
506 caller. If the Discovery sequence does not complete, then EFI_TIMEOUT will be\r
507 returned. Please see the Preboot Execution Environment (PXE) Specification for\r
508 additional details on the implementation of the Discovery sequence.\r
509 If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,\r
510 then the Discovery sequence is stopped and EFI_ABORTED will be returned.\r
511\r
512 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
513 @param[in] Type The type of bootstrap to perform.\r
514 @param[in] Layer Pointer to the boot server layer number to discover, which must be\r
515 PXE_BOOT_LAYER_INITIAL when a new server type is being\r
516 discovered.\r
517 @param[in] UseBis TRUE if Boot Integrity Services are to be used. FALSE otherwise.\r
518 @param[in] Info Pointer to a data structure that contains additional information\r
519 on the type of discovery operation that is to be performed.\r
520 It is optional.\r
521\r
522 @retval EFI_SUCCESS The Discovery sequence has been completed.\r
523 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
524 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
525 @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.\r
526 @retval EFI_OUT_OF_RESOURCES Could not allocate enough memory to complete Discovery.\r
527 @retval EFI_ABORTED The callback function aborted the Discovery sequence.\r
528 @retval EFI_TIMEOUT The Discovery sequence timed out.\r
529 @retval EFI_ICMP_ERROR An ICMP error packet was received during the PXE discovery\r
530 session.\r
531\r
532**/\r
533EFI_STATUS\r
534EFIAPI\r
535EfiPxeBcDiscover (\r
536 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
537 IN UINT16 Type,\r
538 IN UINT16 *Layer,\r
539 IN BOOLEAN UseBis,\r
540 IN EFI_PXE_BASE_CODE_DISCOVER_INFO *Info OPTIONAL\r
541 )\r
542{\r
543 PXEBC_PRIVATE_DATA *Private;\r
544 EFI_PXE_BASE_CODE_MODE *Mode;\r
545 EFI_PXE_BASE_CODE_DISCOVER_INFO DefaultInfo;\r
546 EFI_PXE_BASE_CODE_SRVLIST *SrvList;\r
547 PXEBC_BOOT_SVR_ENTRY *BootSvrEntry;\r
548 UINT16 Index;\r
549 EFI_STATUS Status;\r
550 EFI_PXE_BASE_CODE_IP_FILTER IpFilter;\r
9063c328 551 EFI_PXE_BASE_CODE_DISCOVER_INFO *NewCreatedInfo;\r
a3bcde70
HT		 552\r
553 if (This == NULL) {\r
554 return EFI_INVALID_PARAMETER;\r
555 }\r
556\r
557 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
558 Mode = Private->PxeBc.Mode;\r
559 Mode->IcmpErrorReceived = FALSE;\r
560 BootSvrEntry = NULL;\r
561 SrvList = NULL;\r
562 Status = EFI_DEVICE_ERROR;\r
563 Private->Function = EFI_PXE_BASE_CODE_FUNCTION_DISCOVER;\r
9063c328 564 NewCreatedInfo = NULL;\r
a3bcde70
HT		 565\r
566 if (!Mode->Started) {\r
567 return EFI_NOT_STARTED;\r
568 }\r
569\r
570 //\r
571 // Station address should be ready before do discover.\r
572 //\r
573 if (!Private->IsAddressOk) {\r
574 return EFI_INVALID_PARAMETER;\r
575 }\r
576\r
577 if (Mode->UsingIpv6) {\r
578\r
579 //\r
580 // Stop Udp6Read instance\r
581 //\r
582 Private->Udp6Read->Configure (Private->Udp6Read, NULL);\r
583 } else {\r
584\r
585 //\r
586 // Stop Udp4Read instance\r
587 //\r
588 Private->Udp4Read->Configure (Private->Udp4Read, NULL);\r
589 }\r
590\r
591 //\r
592 // There are 3 methods to get the information for discover.\r
593 //\r
f402291b 594 ZeroMem (&DefaultInfo, sizeof (EFI_PXE_BASE_CODE_DISCOVER_INFO));\r
a3bcde70
HT		 595 if (*Layer != EFI_PXE_BASE_CODE_BOOT_LAYER_INITIAL) {\r
596 //\r
597 // 1. Take the previous setting as the discover info.\r
598 //\r
599 if (!Mode->PxeDiscoverValid ||\r
600 !Mode->PxeReplyReceived ||\r
601 (!Mode->PxeBisReplyReceived && UseBis)) {\r
602 Status = EFI_INVALID_PARAMETER;\r
603 goto ON_EXIT;\r
604 }\r
605\r
606 Info = &DefaultInfo;\r
607 Info->IpCnt = 1;\r
608 Info->UseUCast = TRUE;\r
609 SrvList = Info->SrvList;\r
610 SrvList[0].Type = Type;\r
611 SrvList[0].AcceptAnyResponse = FALSE;\r
612\r
613 CopyMem (&SrvList->IpAddr, &Private->ServerIp, sizeof (EFI_IP_ADDRESS));\r
614\r
615 } else if (Info == NULL) {\r
616 //\r
617 // 2. Extract the discover information from the cached packets if unspecified.\r
618 //\r
9063c328 619 NewCreatedInfo = &DefaultInfo;\r
620 Status = PxeBcExtractDiscoverInfo (Private, Type, &NewCreatedInfo, &BootSvrEntry, &SrvList);\r
a3bcde70
HT		 621 if (EFI_ERROR (Status)) {\r
622 goto ON_EXIT;\r
623 }\r
393a3169 624 ASSERT (NewCreatedInfo != NULL);\r
9063c328 625 Info = NewCreatedInfo;\r
a3bcde70
HT		 626 } else {\r
627 //\r
628 // 3. Take the pass-in information as the discover info, and validate the server list.\r
629 //\r
630 SrvList = Info->SrvList;\r
631\r
632 if (!SrvList[0].AcceptAnyResponse) {\r
633 for (Index = 1; Index < Info->IpCnt; Index++) {\r
634 if (SrvList[Index].AcceptAnyResponse) {\r
635 break;\r
636 }\r
637 }\r
638 if (Index != Info->IpCnt) {\r
639 //\r
640 // It's invalid if the first server doesn't accecpt any response\r
928927dd 641 // but any of the other servers does accept any response.\r
a3bcde70
HT		 642 //\r
643 Status = EFI_INVALID_PARAMETER;\r
644 goto ON_EXIT;\r
645 }\r
646 }\r
647 }\r
648\r
649 //\r
650 // Info and BootSvrEntry/SrvList are all ready by now, so execute discover by UniCast/BroadCast/MultiCast.\r
651 //\r
652 if ((!Info->UseUCast && !Info->UseBCast && !Info->UseMCast) ||\r
653 (Info->MustUseList && Info->IpCnt == 0)) {\r
654 Status = EFI_INVALID_PARAMETER;\r
655 goto ON_EXIT;\r
656 }\r
657\r
658 Private->IsDoDiscover = TRUE;\r
659\r
9063c328 660 if (Info->UseMCast) {\r
a3bcde70
HT		 661 //\r
662 // Do discover by multicast.\r
663 //\r
664 Status = PxeBcDiscoverBootServer (\r
665 Private,\r
666 Type,\r
667 Layer,\r
668 UseBis,\r
669 &Info->ServerMCastIp,\r
9063c328 670 Info->IpCnt,\r
671 SrvList\r
a3bcde70
HT		 672 );\r
673\r
674 } else if (Info->UseBCast) {\r
675 //\r
676 // Do discover by broadcast, but only valid for IPv4.\r
677 //\r
678 ASSERT (!Mode->UsingIpv6);\r
679 Status = PxeBcDiscoverBootServer (\r
680 Private,\r
681 Type,\r
682 Layer,\r
683 UseBis,\r
684 NULL,\r
685 Info->IpCnt,\r
686 SrvList\r
687 );\r
9063c328 688\r
689 } else if (Info->UseUCast) {\r
690 //\r
691 // Do discover by unicast.\r
692 //\r
693 for (Index = 0; Index < Info->IpCnt; Index++) {\r
694 if (BootSvrEntry == NULL) {\r
695 CopyMem (&Private->ServerIp, &SrvList[Index].IpAddr, sizeof (EFI_IP_ADDRESS));\r
696 } else {\r
697 ASSERT (!Mode->UsingIpv6);\r
698 ZeroMem (&Private->ServerIp, sizeof (EFI_IP_ADDRESS));\r
699 CopyMem (&Private->ServerIp, &BootSvrEntry->IpAddr[Index], sizeof (EFI_IPv4_ADDRESS));\r
700 }\r
701\r
702 Status = PxeBcDiscoverBootServer (\r
703 Private,\r
704 Type,\r
705 Layer,\r
706 UseBis,\r
707 &Private->ServerIp,\r
708 Info->IpCnt,\r
709 SrvList\r
710 );\r
711 }\r
a3bcde70
HT		 712 }\r
713\r
1ac9cb8a 714 if (!EFI_ERROR (Status)) {\r
a3bcde70
HT		 715 //\r
716 // Parse the cached PXE reply packet, and store it into mode data if valid.\r
717 //\r
718 if (Mode->UsingIpv6) {\r
719 Status = PxeBcParseDhcp6Packet (&Private->PxeReply.Dhcp6);\r
720 if (!EFI_ERROR (Status)) {\r
721 CopyMem (\r
722 &Mode->PxeReply.Dhcpv6,\r
9063c328 723 &Private->PxeReply.Dhcp6.Packet.Ack.Dhcp6,\r
724 Private->PxeReply.Dhcp6.Packet.Ack.Length\r
a3bcde70
HT		 725 );\r
726 Mode->PxeReplyReceived = TRUE;\r
727 Mode->PxeDiscoverValid = TRUE;\r
728 }\r
729 } else {\r
730 Status = PxeBcParseDhcp4Packet (&Private->PxeReply.Dhcp4);\r
731 if (!EFI_ERROR (Status)) {\r
732 CopyMem (\r
733 &Mode->PxeReply.Dhcpv4,\r
9063c328 734 &Private->PxeReply.Dhcp4.Packet.Ack.Dhcp4,\r
735 Private->PxeReply.Dhcp4.Packet.Ack.Length\r
a3bcde70
HT		 736 );\r
737 Mode->PxeReplyReceived = TRUE;\r
738 Mode->PxeDiscoverValid = TRUE;\r
739 }\r
740 }\r
741 }\r
742\r
743ON_EXIT:\r
744\r
9063c328 745 if (NewCreatedInfo != NULL && NewCreatedInfo != &DefaultInfo) {\r
746 FreePool (NewCreatedInfo);\r
747 }\r
748 \r
18127352 749 if (Mode->UsingIpv6) {\r
357af285 750 Private->Udp6Read->Configure (Private->Udp6Read, &Private->Udp6CfgData);\r
18127352 751 } else {\r
357af285 752 Private->Udp4Read->Configure (Private->Udp4Read, &Private->Udp4CfgData);\r
18127352 753 }\r
754 \r
a3bcde70
HT		 755 //\r
756 // Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP\r
757 // receive filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.\r
758 //\r
759 ZeroMem(&IpFilter, sizeof (EFI_PXE_BASE_CODE_IP_FILTER));\r
760 IpFilter.Filters = EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP;\r
761 This->SetIpFilter (This, &IpFilter);\r
762\r
763 return Status;\r
764}\r
765\r
766\r
767/**\r
768 Used to perform TFTP and MTFTP services.\r
769\r
770 This function is used to perform TFTP and MTFTP services. This includes the\r
771 TFTP operations to get the size of a file, read a directory, read a file, and\r
772 write a file. It also includes the MTFTP operations to get the size of a file,\r
773 read a directory, and read a file. The type of operation is specified by Operation.\r
774 If the callback function that is invoked during the TFTP/MTFTP operation does\r
775 not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE, then EFI_ABORTED will\r
776 be returned.\r
777 For read operations, the return data will be placed in the buffer specified by\r
778 BufferPtr. If BufferSize is too small to contain the entire downloaded file,\r
779 then EFI_BUFFER_TOO_SMALL will be returned and BufferSize will be set to zero,\r
780 or the size of the requested file. (NOTE: the size of the requested file is only returned\r
781 if the TFTP server supports TFTP options). If BufferSize is large enough for the\r
782 read operation, then BufferSize will be set to the size of the downloaded file,\r
783 and EFI_SUCCESS will be returned. Applications using the PxeBc.Mtftp() services\r
784 should use the get-file-size operations to determine the size of the downloaded\r
785 file prior to using the read-file operations-especially when downloading large\r
786 (greater than 64 MB) files-instead of making two calls to the read-file operation.\r
787 Following this recommendation will save time if the file is larger than expected\r
788 and the TFTP server does not support TFTP option extensions. Without TFTP option\r
789 extension support, the client must download the entire file, counting and discarding\r
790 the received packets, to determine the file size.\r
791 For write operations, the data to be sent is in the buffer specified by BufferPtr.\r
792 BufferSize specifies the number of bytes to send. If the write operation completes\r
793 successfully, then EFI_SUCCESS will be returned.\r
794 For TFTP "get file size" operations, the size of the requested file or directory\r
795 is returned in BufferSize, and EFI_SUCCESS will be returned. If the TFTP server\r
796 does not support options, the file will be downloaded into a bit bucket and the\r
797 length of the downloaded file will be returned. For MTFTP "get file size" operations,\r
798 if the MTFTP server does not support the "get file size" option, EFI_UNSUPPORTED\r
799 will be returned.\r
800 This function can take up to 10 seconds to timeout and return control to the caller.\r
801 If the TFTP sequence does not complete, EFI_TIMEOUT will be returned.\r
802 If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,\r
803 then the TFTP sequence is stopped and EFI_ABORTED will be returned.\r
804\r
805 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
806 @param[in] Operation The type of operation to perform.\r
807 @param[in, out] BufferPtr A pointer to the data buffer.\r
808 @param[in] Overwrite Only used on write file operations. TRUE if a file on a remote\r
809 server can be overwritten.\r
810 @param[in, out] BufferSize For get-file-size operations, *BufferSize returns the size of the\r
811 requested file.\r
812 @param[in] BlockSize The requested block size to be used during a TFTP transfer.\r
813 @param[in] ServerIp The TFTP / MTFTP server IP address.\r
814 @param[in] Filename A Null-terminated ASCII string that specifies a directory name\r
815 or a file name.\r
816 @param[in] Info Pointer to the MTFTP information.\r
817 @param[in] DontUseBuffer Set to FALSE for normal TFTP and MTFTP read file operation.\r
818\r
819 @retval EFI_SUCCESS The TFTP/MTFTP operation was completed.\r
820 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
821 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
822 @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.\r
823 @retval EFI_BUFFER_TOO_SMALL The buffer is not large enough to complete the read operation.\r
824 @retval EFI_ABORTED The callback function aborted the TFTP/MTFTP operation.\r
825 @retval EFI_TIMEOUT The TFTP/MTFTP operation timed out.\r
826 @retval EFI_ICMP_ERROR An ICMP error packet was received during the MTFTP session.\r
827 @retval EFI_TFTP_ERROR A TFTP error packet was received during the MTFTP session.\r
828\r
829**/\r
830EFI_STATUS\r
831EFIAPI\r
832EfiPxeBcMtftp (\r
833 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
834 IN EFI_PXE_BASE_CODE_TFTP_OPCODE Operation,\r
835 IN OUT VOID *BufferPtr OPTIONAL,\r
836 IN BOOLEAN Overwrite,\r
837 IN OUT UINT64 *BufferSize,\r
838 IN UINTN *BlockSize OPTIONAL,\r
839 IN EFI_IP_ADDRESS *ServerIp,\r
840 IN UINT8 *Filename,\r
841 IN EFI_PXE_BASE_CODE_MTFTP_INFO *Info OPTIONAL,\r
842 IN BOOLEAN DontUseBuffer\r
843 )\r
844{\r
845 PXEBC_PRIVATE_DATA *Private;\r
846 EFI_PXE_BASE_CODE_MODE *Mode;\r
847 EFI_MTFTP4_CONFIG_DATA Mtftp4Config;\r
848 EFI_MTFTP6_CONFIG_DATA Mtftp6Config;\r
849 VOID *Config;\r
850 EFI_STATUS Status;\r
851 EFI_PXE_BASE_CODE_IP_FILTER IpFilter;\r
852\r
853\r
854 if ((This == NULL) ||\r
855 (Filename == NULL) ||\r
856 (BufferSize == NULL) ||\r
857 (ServerIp == NULL) ||\r
858 ((BufferPtr == NULL) && DontUseBuffer) ||\r
859 ((BlockSize != NULL) && (*BlockSize < PXE_MTFTP_DEFAULT_BLOCK_SIZE)) ||\r
860 (!NetIp4IsUnicast (NTOHL (ServerIp->Addr[0]), 0) && !NetIp6IsValidUnicast (&ServerIp->v6))) {\r
861 return EFI_INVALID_PARAMETER;\r
862 }\r
863\r
864 Config = NULL;\r
865 Status = EFI_DEVICE_ERROR;\r
866 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
867 Mode = Private->PxeBc.Mode;\r
868\r
869 if (Mode->UsingIpv6) {\r
870 //\r
871 // Set configuration data for Mtftp6 instance.\r
872 //\r
873 ZeroMem (&Mtftp6Config, sizeof (EFI_MTFTP6_CONFIG_DATA));\r
874 Config = &Mtftp6Config;\r
875 Mtftp6Config.TimeoutValue = PXEBC_MTFTP_TIMEOUT;\r
876 Mtftp6Config.TryCount = PXEBC_MTFTP_RETRIES;\r
877 CopyMem (&Mtftp6Config.StationIp, &Private->StationIp.v6, sizeof (EFI_IPv6_ADDRESS));\r
878 CopyMem (&Mtftp6Config.ServerIp, &ServerIp->v6, sizeof (EFI_IPv6_ADDRESS));\r
879 //\r
880 // Stop Udp6Read instance\r
881 //\r
882 Private->Udp6Read->Configure (Private->Udp6Read, NULL);\r
883 } else {\r
884 //\r
885 // Set configuration data for Mtftp4 instance.\r
886 //\r
887 ZeroMem (&Mtftp4Config, sizeof (EFI_MTFTP4_CONFIG_DATA));\r
888 Config = &Mtftp4Config;\r
889 Mtftp4Config.UseDefaultSetting = FALSE;\r
890 Mtftp4Config.TimeoutValue = PXEBC_MTFTP_TIMEOUT;\r
891 Mtftp4Config.TryCount = PXEBC_MTFTP_RETRIES;\r
892 CopyMem (&Mtftp4Config.StationIp, &Private->StationIp.v4, sizeof (EFI_IPv4_ADDRESS));\r
893 CopyMem (&Mtftp4Config.SubnetMask, &Private->SubnetMask.v4, sizeof (EFI_IPv4_ADDRESS));\r
894 CopyMem (&Mtftp4Config.GatewayIp, &Private->GatewayIp.v4, sizeof (EFI_IPv4_ADDRESS));\r
895 CopyMem (&Mtftp4Config.ServerIp, &ServerIp->v4, sizeof (EFI_IPv4_ADDRESS));\r
896 //\r
897 // Stop Udp4Read instance\r
898 //\r
899 Private->Udp4Read->Configure (Private->Udp4Read, NULL);\r
900 }\r
901\r
902 Mode->TftpErrorReceived = FALSE;\r
903 Mode->IcmpErrorReceived = FALSE;\r
904\r
905 switch (Operation) {\r
906\r
907 case EFI_PXE_BASE_CODE_TFTP_GET_FILE_SIZE:\r
908 //\r
909 // Send TFTP request to get file size.\r
910 //\r
911 Status = PxeBcTftpGetFileSize (\r
912 Private,\r
913 Config,\r
914 Filename,\r
915 BlockSize,\r
916 BufferSize\r
917 );\r
918\r
919 break;\r
920\r
921 case EFI_PXE_BASE_CODE_TFTP_READ_FILE:\r
922 //\r
923 // Send TFTP request to read file.\r
924 //\r
925 Status = PxeBcTftpReadFile (\r
926 Private,\r
927 Config,\r
928 Filename,\r
929 BlockSize,\r
930 BufferPtr,\r
931 BufferSize,\r
932 DontUseBuffer\r
933 );\r
934\r
935 break;\r
936\r
937 case EFI_PXE_BASE_CODE_TFTP_WRITE_FILE:\r
938 //\r
939 // Send TFTP request to write file.\r
940 //\r
941 Status = PxeBcTftpWriteFile (\r
942 Private,\r
943 Config,\r
944 Filename,\r
945 Overwrite,\r
946 BlockSize,\r
947 BufferPtr,\r
948 BufferSize\r
949 );\r
950\r
951 break;\r
952\r
953 case EFI_PXE_BASE_CODE_TFTP_READ_DIRECTORY:\r
954 //\r
955 // Send TFTP request to read directory.\r
956 //\r
957 Status = PxeBcTftpReadDirectory (\r
958 Private,\r
959 Config,\r
960 Filename,\r
961 BlockSize,\r
962 BufferPtr,\r
963 BufferSize,\r
964 DontUseBuffer\r
965 );\r
966\r
967 break;\r
968\r
969 case EFI_PXE_BASE_CODE_MTFTP_GET_FILE_SIZE:\r
970 case EFI_PXE_BASE_CODE_MTFTP_READ_FILE:\r
971 case EFI_PXE_BASE_CODE_MTFTP_READ_DIRECTORY:\r
972 Status = EFI_UNSUPPORTED;\r
973\r
974 break;\r
975\r
976 default:\r
977 Status = EFI_INVALID_PARAMETER;\r
978\r
979 break;\r
980 }\r
981\r
982 if (Status == EFI_ICMP_ERROR) {\r
983 Mode->IcmpErrorReceived = TRUE;\r
984 }\r
985\r
1ac9cb8a 986 //\r
987 // Reconfigure the UDP instance with the default configuration.\r
988 //\r
18127352 989 if (Mode->UsingIpv6) {\r
357af285 990 Private->Udp6Read->Configure (Private->Udp6Read, &Private->Udp6CfgData);\r
18127352 991 } else {\r
357af285 992 Private->Udp4Read->Configure (Private->Udp4Read, &Private->Udp4CfgData);\r
18127352 993 }\r
a3bcde70
HT		 994 //\r
995 // Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP\r
996 // receive filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.\r
997 //\r
998 ZeroMem(&IpFilter, sizeof (EFI_PXE_BASE_CODE_IP_FILTER));\r
999 IpFilter.Filters = EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP;\r
1000 This->SetIpFilter (This, &IpFilter);\r
1001\r
1002 return Status;\r
1003}\r
1004\r
1005\r
1006/**\r
1007 Writes a UDP packet to the network interface.\r
1008\r
1009 This function writes a UDP packet specified by the (optional HeaderPtr and)\r
1010 BufferPtr parameters to the network interface. The UDP header is automatically\r
1011 built by this routine. It uses the parameters OpFlags, DestIp, DestPort, GatewayIp,\r
1012 SrcIp, and SrcPort to build this header. If the packet is successfully built and\r
1013 transmitted through the network interface, then EFI_SUCCESS will be returned.\r
1014 If a timeout occurs during the transmission of the packet, then EFI_TIMEOUT will\r
1015 be returned. If an ICMP error occurs during the transmission of the packet, then\r
1016 the IcmpErrorReceived field is set to TRUE, the IcmpError field is filled in and\r
1017 EFI_ICMP_ERROR will be returned. If the Callback Protocol does not return\r
1018 EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE, then EFI_ABORTED will be returned.\r
1019\r
1020 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
1021 @param[in] OpFlags The UDP operation flags.\r
1022 @param[in] DestIp The destination IP address.\r
1023 @param[in] DestPort The destination UDP port number.\r
1024 @param[in] GatewayIp The gateway IP address.\r
1025 @param[in] SrcIp The source IP address.\r
1026 @param[in, out] SrcPort The source UDP port number.\r
1027 @param[in] HeaderSize An optional field which may be set to the length of a header\r
1028 at HeaderPtr to be prefixed to the data at BufferPtr.\r
1029 @param[in] HeaderPtr If HeaderSize is not NULL, a pointer to a header to be\r
1030 prefixed to the data at BufferPtr.\r
1031 @param[in] BufferSize A pointer to the size of the data at BufferPtr.\r
1032 @param[in] BufferPtr A pointer to the data to be written.\r
1033\r
1034 @retval EFI_SUCCESS The UDP Write operation completed.\r
1035 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
1036 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
1037 @retval EFI_BAD_BUFFER_SIZE The buffer is too long to be transmitted.\r
1038 @retval EFI_ABORTED The callback function aborted the UDP Write operation.\r
1039 @retval EFI_TIMEOUT The UDP Write operation timed out.\r
1040 @retval EFI_ICMP_ERROR An ICMP error packet was received during the UDP write session.\r
1041\r
1042**/\r
1043EFI_STATUS\r
1044EFIAPI\r
1045EfiPxeBcUdpWrite (\r
1046 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
1047 IN UINT16 OpFlags,\r
1048 IN EFI_IP_ADDRESS *DestIp,\r
1049 IN EFI_PXE_BASE_CODE_UDP_PORT *DestPort,\r
1050 IN EFI_IP_ADDRESS *GatewayIp OPTIONAL,\r
1051 IN EFI_IP_ADDRESS *SrcIp OPTIONAL,\r
1052 IN OUT EFI_PXE_BASE_CODE_UDP_PORT *SrcPort OPTIONAL,\r
1053 IN UINTN *HeaderSize OPTIONAL,\r
1054 IN VOID *HeaderPtr OPTIONAL,\r
1055 IN UINTN *BufferSize,\r
1056 IN VOID *BufferPtr\r
1057 )\r
1058{\r
1059 PXEBC_PRIVATE_DATA *Private;\r
1060 EFI_PXE_BASE_CODE_MODE *Mode;\r
1061 EFI_UDP4_SESSION_DATA Udp4Session;\r
1062 EFI_UDP6_SESSION_DATA Udp6Session;\r
1063 EFI_STATUS Status;\r
1064 BOOLEAN DoNotFragment;\r
1065\r
1066 if (This == NULL || DestIp == NULL || DestPort == NULL) {\r
1067 return EFI_INVALID_PARAMETER;\r
1068 }\r
1069\r
1070 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
1071 Mode = Private->PxeBc.Mode;\r
1072\r
1073 if ((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_MAY_FRAGMENT) != 0) {\r
1074 DoNotFragment = FALSE;\r
1075 } else {\r
1076 DoNotFragment = TRUE;\r
1077 }\r
1078\r
1079 if (!Mode->UsingIpv6 && GatewayIp != NULL && !NetIp4IsUnicast (NTOHL (GatewayIp->Addr[0]), 0)) {\r
1080 //\r
1081 // Gateway is provided but it's not a unicast IPv4 address, while it will be ignored for IPv6.\r
1082 //\r
1083 return EFI_INVALID_PARAMETER;\r
1084 }\r
1085\r
1086 if (HeaderSize != NULL && (*HeaderSize == 0 || HeaderPtr == NULL)) {\r
1087 return EFI_INVALID_PARAMETER;\r
1088 }\r
1089\r
1090 if (BufferSize == NULL || (*BufferSize != 0 && BufferPtr == NULL)) {\r
1091 return EFI_INVALID_PARAMETER;\r
1092 }\r
1093\r
1094 if (!Mode->Started) {\r
1095 return EFI_NOT_STARTED;\r
1096 }\r
1097\r
1098 if (!Private->IsAddressOk && SrcIp == NULL) {\r
1099 return EFI_INVALID_PARAMETER;\r
1100 }\r
1101\r
1102 if (Private->CurSrcPort == 0 ||\r
1103 (SrcPort != NULL && *SrcPort != Private->CurSrcPort)) {\r
1104 //\r
1105 // Reconfigure UDPv4/UDPv6 for UdpWrite if the source port changed.\r
1106 //\r
1107 if (SrcPort != NULL) {\r
1108 Private->CurSrcPort = *SrcPort;\r
1109 }\r
1110 }\r
1111\r
1112 if (Mode->UsingIpv6) {\r
1113 Status = PxeBcConfigUdp6Write (\r
1114 Private->Udp6Write,\r
1115 &Private->StationIp.v6,\r
1116 &Private->CurSrcPort\r
1117 );\r
1118 } else {\r
1119 //\r
1120 // Configure the UDPv4 instance with gateway information from DHCP server as default.\r
1121 //\r
1122 Status = PxeBcConfigUdp4Write (\r
1123 Private->Udp4Write,\r
1124 &Private->StationIp.v4,\r
1125 &Private->SubnetMask.v4,\r
1126 &Private->GatewayIp.v4,\r
1127 &Private->CurSrcPort,\r
1128 DoNotFragment\r
1129 );\r
1130 }\r
1131\r
1132 if (EFI_ERROR (Status)) {\r
1133 Private->CurSrcPort = 0;\r
1134 return EFI_INVALID_PARAMETER;\r
1135 } else if (SrcPort != NULL) {\r
1136 *SrcPort = Private->CurSrcPort;\r
1137 }\r
1138\r
1139 //\r
1140 // Start a timer as timeout event for this blocking API.\r
1141 //\r
1142 gBS->SetTimer (Private->UdpTimeOutEvent, TimerRelative, PXEBC_UDP_TIMEOUT);\r
1143\r
1144 if (Mode->UsingIpv6) {\r
1145 //\r
1146 // Construct UDPv6 session data.\r
1147 //\r
1148 ZeroMem (&Udp6Session, sizeof (EFI_UDP6_SESSION_DATA));\r
1149 CopyMem (&Udp6Session.DestinationAddress, DestIp, sizeof (EFI_IPv6_ADDRESS));\r
1150 Udp6Session.DestinationPort = *DestPort;\r
1151 if (SrcIp != NULL) {\r
1152 CopyMem (&Udp6Session.SourceAddress, SrcIp, sizeof (EFI_IPv6_ADDRESS));\r
1153 }\r
1154 if (SrcPort != NULL) {\r
1155 Udp6Session.SourcePort = *SrcPort;\r
1156 }\r
1157\r
1158 Status = PxeBcUdp6Write (\r
1159 Private->Udp6Write,\r
1160 &Udp6Session,\r
1161 Private->UdpTimeOutEvent,\r
1162 HeaderSize,\r
1163 HeaderPtr,\r
1164 BufferSize,\r
1165 BufferPtr\r
1166 );\r
1167 } else {\r
1168 //\r
1169 // Construct UDPv4 session data.\r
1170 //\r
1171 ZeroMem (&Udp4Session, sizeof (EFI_UDP4_SESSION_DATA));\r
1172 CopyMem (&Udp4Session.DestinationAddress, DestIp, sizeof (EFI_IPv4_ADDRESS));\r
1173 Udp4Session.DestinationPort = *DestPort;\r
1174 if (SrcIp != NULL) {\r
1175 CopyMem (&Udp4Session.SourceAddress, SrcIp, sizeof (EFI_IPv4_ADDRESS));\r
1176 }\r
1177 if (SrcPort != NULL) {\r
1178 Udp4Session.SourcePort = *SrcPort;\r
1179 }\r
1180 //\r
1181 // Override the gateway information if user specified.\r
1182 //\r
1183 Status = PxeBcUdp4Write (\r
1184 Private->Udp4Write,\r
1185 &Udp4Session,\r
1186 Private->UdpTimeOutEvent,\r
1187 (EFI_IPv4_ADDRESS *) GatewayIp,\r
1188 HeaderSize,\r
1189 HeaderPtr,\r
1190 BufferSize,\r
1191 BufferPtr\r
1192 );\r
1193 }\r
1194\r
1195 gBS->SetTimer (Private->UdpTimeOutEvent, TimerCancel, 0);\r
1196\r
1197\r
1198 //\r
1199 // Reset the UdpWrite instance.\r
1200 //\r
1201 if (Mode->UsingIpv6) {\r
1202 Private->Udp6Write->Configure (Private->Udp6Write, NULL);\r
1203 } else {\r
1204 Private->Udp4Write->Configure (Private->Udp4Write, NULL);\r
1205 }\r
1206\r
1207 return Status;\r
1208}\r
1209\r
1210\r
1211/**\r
1212 Reads a UDP packet from the network interface.\r
1213+\r
1214 This function reads a UDP packet from a network interface. The data contents\r
1215 are returned in (the optional HeaderPtr and) BufferPtr, and the size of the\r
1216 buffer received is returned in BufferSize . If the input BufferSize is smaller\r
1217 than the UDP packet received (less optional HeaderSize), it will be set to the\r
1218 required size, and EFI_BUFFER_TOO_SMALL will be returned. In this case, the\r
1219 contents of BufferPtr are undefined, and the packet is lost. If a UDP packet is\r
1220 successfully received, then EFI_SUCCESS will be returned, and the information\r
1221 from the UDP header will be returned in DestIp, DestPort, SrcIp, and SrcPort if\r
1222 they are not NULL. Depending on the values of OpFlags and the DestIp, DestPort,\r
1223 SrcIp, and SrcPort input values, different types of UDP packet receive filtering\r
1224 will be performed. The following tables summarize these receive filter operations.\r
1225\r
1226 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
1227 @param[in] OpFlags The UDP operation flags.\r
1228 @param[in, out] DestIp The destination IP address.\r
1229 @param[in, out] DestPort The destination UDP port number.\r
1230 @param[in, out] SrcIp The source IP address.\r
1231 @param[in, out] SrcPort The source UDP port number.\r
1232 @param[in] HeaderSize An optional field which may be set to the length of a\r
1233 header at HeaderPtr to be prefixed to the data at BufferPtr.\r
1234 @param[in] HeaderPtr If HeaderSize is not NULL, a pointer to a header to be\r
1235 prefixed to the data at BufferPtr.\r
1236 @param[in, out] BufferSize A pointer to the size of the data at BufferPtr.\r
1237 @param[in] BufferPtr A pointer to the data to be read.\r
1238\r
1239 @retval EFI_SUCCESS The UDP Read operation was completed.\r
1240 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
1241 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
1242 @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.\r
1243 @retval EFI_BUFFER_TOO_SMALL The packet is larger than Buffer can hold.\r
1244 @retval EFI_ABORTED The callback function aborted the UDP Read operation.\r
1245 @retval EFI_TIMEOUT The UDP Read operation timed out.\r
1246\r
1247**/\r
1248EFI_STATUS\r
1249EFIAPI\r
1250EfiPxeBcUdpRead (\r
1251 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
1252 IN UINT16 OpFlags,\r
1253 IN OUT EFI_IP_ADDRESS *DestIp OPTIONAL,\r
1254 IN OUT EFI_PXE_BASE_CODE_UDP_PORT *DestPort OPTIONAL,\r
1255 IN OUT EFI_IP_ADDRESS *SrcIp OPTIONAL,\r
1256 IN OUT EFI_PXE_BASE_CODE_UDP_PORT *SrcPort OPTIONAL,\r
1257 IN UINTN *HeaderSize OPTIONAL,\r
1258 IN VOID *HeaderPtr OPTIONAL,\r
1259 IN OUT UINTN *BufferSize,\r
1260 IN VOID *BufferPtr\r
1261 )\r
1262{\r
1263 PXEBC_PRIVATE_DATA *Private;\r
1264 EFI_PXE_BASE_CODE_MODE *Mode;\r
1265 EFI_UDP4_COMPLETION_TOKEN Udp4Token;\r
1266 EFI_UDP6_COMPLETION_TOKEN Udp6Token;\r
1267 EFI_UDP4_RECEIVE_DATA *Udp4Rx;\r
1268 EFI_UDP6_RECEIVE_DATA *Udp6Rx;\r
1269 EFI_STATUS Status;\r
1270 BOOLEAN IsDone;\r
1271 BOOLEAN IsMatched;\r
1272 UINTN CopiedLen;\r
eb2710af 1273 UINTN HeaderLen;\r
1274 UINTN HeaderCopiedLen;\r
1275 UINTN BufferCopiedLen;\r
1276 UINT32 FragmentLength;\r
1277 UINTN FragmentIndex;\r
1278 UINT8 *FragmentBuffer;\r
a3bcde70 1279\r
903d1fa9 1280 if (This == NULL) {\r
a3bcde70
HT		 1281 return EFI_INVALID_PARAMETER;\r
1282 }\r
1283\r
1284 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
1285 Mode = Private->PxeBc.Mode;\r
1286 IsDone = FALSE;\r
1287 IsMatched = FALSE;\r
1288 Udp4Rx = NULL;\r
1289 Udp6Rx = NULL;\r
1290\r
903d1fa9
FS		 1291 if (((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_DEST_PORT) == 0 && DestPort == NULL) ||\r
1292 ((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_SRC_IP) == 0 && SrcIp == NULL) ||\r
1293 ((OpFlags & EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_SRC_PORT) == 0 && SrcPort == NULL)) {\r
a3bcde70
HT		 1294 return EFI_INVALID_PARAMETER;\r
1295 }\r
1296\r
1297 if ((HeaderSize != NULL && *HeaderSize == 0) || (HeaderSize != NULL && HeaderPtr == NULL)) {\r
1298 return EFI_INVALID_PARAMETER;\r
1299 }\r
1300\r
1301 if ((BufferSize == NULL) || (BufferPtr == NULL)) {\r
1302 return EFI_INVALID_PARAMETER;\r
1303 }\r
1304\r
1305 if (!Mode->Started) {\r
1306 return EFI_NOT_STARTED;\r
1307 }\r
1308\r
1309 ZeroMem (&Udp6Token, sizeof (EFI_UDP6_COMPLETION_TOKEN));\r
1310 ZeroMem (&Udp4Token, sizeof (EFI_UDP4_COMPLETION_TOKEN));\r
1311\r
1312 if (Mode->UsingIpv6) {\r
1313 Status = gBS->CreateEvent (\r
1314 EVT_NOTIFY_SIGNAL,\r
1315 TPL_NOTIFY,\r
1316 PxeBcCommonNotify,\r
1317 &IsDone,\r
1318 &Udp6Token.Event\r
1319 );\r
1320 if (EFI_ERROR (Status)) {\r
1321 return EFI_OUT_OF_RESOURCES;\r
1322 }\r
1323 } else {\r
1324 Status = gBS->CreateEvent (\r
1325 EVT_NOTIFY_SIGNAL,\r
1326 TPL_NOTIFY,\r
1327 PxeBcCommonNotify,\r
1328 &IsDone,\r
1329 &Udp4Token.Event\r
1330 );\r
1331 if (EFI_ERROR (Status)) {\r
1332 return EFI_OUT_OF_RESOURCES;\r
1333 }\r
1334 }\r
1335\r
1336 //\r
1337 // Start a timer as timeout event for this blocking API.\r
1338 //\r
1339 gBS->SetTimer (Private->UdpTimeOutEvent, TimerRelative, PXEBC_UDP_TIMEOUT);\r
1340 Mode->IcmpErrorReceived = FALSE;\r
1341\r
1342 //\r
1343 // Read packet by Udp4Read/Udp6Read until matched or timeout.\r
1344 //\r
1345 while (!IsMatched && !EFI_ERROR (Status)) {\r
1346 if (Mode->UsingIpv6) {\r
1347 Status = PxeBcUdp6Read (\r
1348 Private->Udp6Read,\r
1349 &Udp6Token,\r
1350 Mode,\r
1351 Private->UdpTimeOutEvent,\r
1352 OpFlags,\r
1353 &IsDone,\r
1354 &IsMatched,\r
1355 DestIp,\r
1356 DestPort,\r
1357 SrcIp,\r
1358 SrcPort\r
1359 );\r
1360 } else {\r
1361 Status = PxeBcUdp4Read (\r
1362 Private->Udp4Read,\r
1363 &Udp4Token,\r
1364 Mode,\r
1365 Private->UdpTimeOutEvent,\r
1366 OpFlags,\r
1367 &IsDone,\r
1368 &IsMatched,\r
1369 DestIp,\r
1370 DestPort,\r
1371 SrcIp,\r
1372 SrcPort\r
1373 );\r
1374 }\r
1375 }\r
1376\r
1377 if (Status == EFI_ICMP_ERROR ||\r
1378 Status == EFI_NETWORK_UNREACHABLE ||\r
1379 Status == EFI_HOST_UNREACHABLE ||\r
1380 Status == EFI_PROTOCOL_UNREACHABLE ||\r
1381 Status == EFI_PORT_UNREACHABLE) {\r
1382 //\r
1383 // Get different return status for icmp error from Udp, refers to UEFI spec.\r
1384 //\r
1385 Mode->IcmpErrorReceived = TRUE;\r
1386 }\r
1387 gBS->SetTimer (Private->UdpTimeOutEvent, TimerCancel, 0);\r
1388\r
1389 if (IsMatched) {\r
1390 //\r
1391 // Copy the rececived packet to user if matched by filter.\r
1392 //\r
a3bcde70
HT		 1393 if (Mode->UsingIpv6) {\r
1394 Udp6Rx = Udp6Token.Packet.RxData;\r
1395 ASSERT (Udp6Rx != NULL);\r
eb2710af 1396\r
1397 HeaderLen = 0;\r
a3bcde70 1398 if (HeaderSize != NULL) {\r
eb2710af 1399 HeaderLen = MIN (*HeaderSize, Udp6Rx->DataLength);\r
a3bcde70 1400 }\r
eb2710af 1401\r
1402 if (Udp6Rx->DataLength - HeaderLen > *BufferSize) {\r
a3bcde70
HT		 1403 Status = EFI_BUFFER_TOO_SMALL;\r
1404 } else {\r
d40002ba 1405 if (HeaderSize != NULL) {\r
1406 *HeaderSize = HeaderLen;\r
1407 }\r
eb2710af 1408 *BufferSize = Udp6Rx->DataLength - HeaderLen;\r
1409\r
1410 HeaderCopiedLen = 0;\r
1411 BufferCopiedLen = 0;\r
1412 for (FragmentIndex = 0; FragmentIndex < Udp6Rx->FragmentCount; FragmentIndex++) {\r
1413 FragmentLength = Udp6Rx->FragmentTable[FragmentIndex].FragmentLength;\r
1414 FragmentBuffer = Udp6Rx->FragmentTable[FragmentIndex].FragmentBuffer;\r
1415 if (HeaderCopiedLen + FragmentLength < HeaderLen) {\r
1416 //\r
1417 // Copy the header part of received data.\r
1418 //\r
1419 CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, FragmentLength);\r
1420 HeaderCopiedLen += FragmentLength;\r
1421 } else if (HeaderCopiedLen < HeaderLen) {\r
1422 //\r
1423 // Copy the header part of received data.\r
1424 //\r
1425 CopiedLen = HeaderLen - HeaderCopiedLen;\r
1426 CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, CopiedLen);\r
1427 HeaderCopiedLen += CopiedLen;\r
1428\r
1429 //\r
1430 // Copy the other part of received data.\r
1431 //\r
1432 CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer + CopiedLen, FragmentLength - CopiedLen);\r
1433 BufferCopiedLen += (FragmentLength - CopiedLen);\r
1434 } else {\r
1435 //\r
1436 // Copy the other part of received data.\r
1437 //\r
1438 CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer, FragmentLength);\r
1439 BufferCopiedLen += FragmentLength;\r
1440 }\r
1441 }\r
a3bcde70
HT		 1442 }\r
1443 //\r
1444 // Recycle the receiving buffer after copy to user.\r
1445 //\r
1446 gBS->SignalEvent (Udp6Rx->RecycleSignal);\r
1447 } else {\r
1448 Udp4Rx = Udp4Token.Packet.RxData;\r
1449 ASSERT (Udp4Rx != NULL);\r
eb2710af 1450\r
1451 HeaderLen = 0;\r
a3bcde70 1452 if (HeaderSize != NULL) {\r
eb2710af 1453 HeaderLen = MIN (*HeaderSize, Udp4Rx->DataLength);\r
a3bcde70 1454 }\r
eb2710af 1455\r
1456 if (Udp4Rx->DataLength - HeaderLen > *BufferSize) {\r
a3bcde70
HT		 1457 Status = EFI_BUFFER_TOO_SMALL;\r
1458 } else {\r
d40002ba 1459 if (HeaderSize != NULL) {\r
1460 *HeaderSize = HeaderLen;\r
1461 }\r
eb2710af 1462 *BufferSize = Udp4Rx->DataLength - HeaderLen;\r
1463\r
1464 HeaderCopiedLen = 0;\r
1465 BufferCopiedLen = 0;\r
1466 for (FragmentIndex = 0; FragmentIndex < Udp4Rx->FragmentCount; FragmentIndex++) {\r
1467 FragmentLength = Udp4Rx->FragmentTable[FragmentIndex].FragmentLength;\r
1468 FragmentBuffer = Udp4Rx->FragmentTable[FragmentIndex].FragmentBuffer;\r
1469 if (HeaderCopiedLen + FragmentLength < HeaderLen) {\r
1470 //\r
1471 // Copy the header part of received data.\r
1472 //\r
1473 CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, FragmentLength);\r
1474 HeaderCopiedLen += FragmentLength;\r
1475 } else if (HeaderCopiedLen < HeaderLen) {\r
1476 //\r
1477 // Copy the header part of received data.\r
1478 //\r
1479 CopiedLen = HeaderLen - HeaderCopiedLen;\r
1480 CopyMem ((UINT8 *) HeaderPtr + HeaderCopiedLen, FragmentBuffer, CopiedLen);\r
1481 HeaderCopiedLen += CopiedLen;\r
1482\r
1483 //\r
1484 // Copy the other part of received data.\r
1485 //\r
1486 CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer + CopiedLen, FragmentLength - CopiedLen);\r
1487 BufferCopiedLen += (FragmentLength - CopiedLen);\r
1488 } else {\r
1489 //\r
1490 // Copy the other part of received data.\r
1491 //\r
1492 CopyMem ((UINT8 *) BufferPtr + BufferCopiedLen, FragmentBuffer, FragmentLength);\r
1493 BufferCopiedLen += FragmentLength;\r
1494 }\r
1495 }\r
a3bcde70
HT		 1496 }\r
1497 //\r
1498 // Recycle the receiving buffer after copy to user.\r
1499 //\r
1500 gBS->SignalEvent (Udp4Rx->RecycleSignal);\r
1501 }\r
1502 }\r
1503\r
1504 if (Mode->UsingIpv6) {\r
1505 Private->Udp6Read->Cancel (Private->Udp6Read, &Udp6Token);\r
1506 gBS->CloseEvent (Udp6Token.Event);\r
1507 } else {\r
1508 Private->Udp4Read->Cancel (Private->Udp4Read, &Udp4Token);\r
1509 gBS->CloseEvent (Udp4Token.Event);\r
1510 }\r
1511\r
1512 return Status;\r
1513}\r
1514\r
1515\r
1516/**\r
1517 Updates the IP receive filters of a network device and enables software filtering.\r
1518\r
1519 The NewFilter field is used to modify the network device's current IP receive\r
1520 filter settings and to enable a software filter. This function updates the IpFilter\r
1521 field of the EFI_PXE_BASE_CODE_MODE structure with the contents of NewIpFilter.\r
1522 The software filter is used when the USE_FILTER in OpFlags is set to UdpRead().\r
1523 The current hardware filter remains in effect no matter what the settings of OpFlags.\r
1524 This is so that the meaning of ANY_DEST_IP set in OpFlags to UdpRead() is from those\r
1525 packets whose reception is enabled in hardware-physical NIC address (unicast),\r
1526 broadcast address, logical address or addresses (multicast), or all (promiscuous).\r
1527 UdpRead() does not modify the IP filter settings.\r
1528 Dhcp(), Discover(), and Mtftp() set the IP filter, and return with the IP receive\r
1529 filter list emptied and the filter set to EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP.\r
1530 If an application or driver wishes to preserve the IP receive filter settings,\r
1531 it will have to preserve the IP receive filter settings before these calls, and\r
1532 use SetIpFilter() to restore them after the calls. If incompatible filtering is\r
1533 requested (for example, PROMISCUOUS with anything else), or if the device does not\r
1534 support a requested filter setting and it cannot be accommodated in software\r
1535 (for example, PROMISCUOUS not supported), EFI_INVALID_PARAMETER will be returned.\r
1536 The IPlist field is used to enable IPs other than the StationIP. They may be\r
1537 multicast or unicast. If IPcnt is set as well as EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP,\r
1538 then both the StationIP and the IPs from the IPlist will be used.\r
1539\r
1540 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
1541 @param[in] NewFilter Pointer to the new set of IP receive filters.\r
1542\r
1543 @retval EFI_SUCCESS The IP receive filter settings were updated.\r
1544 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
1545 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
1546\r
1547**/\r
1548EFI_STATUS\r
1549EFIAPI\r
1550EfiPxeBcSetIpFilter (\r
1551 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
1552 IN EFI_PXE_BASE_CODE_IP_FILTER *NewFilter\r
1553 )\r
1554{\r
1555 EFI_STATUS Status;\r
1556 PXEBC_PRIVATE_DATA *Private;\r
1557 EFI_PXE_BASE_CODE_MODE *Mode;\r
18127352 1558 EFI_UDP4_CONFIG_DATA *Udp4Cfg;\r
1559 EFI_UDP6_CONFIG_DATA *Udp6Cfg;\r
a3bcde70
HT		 1560 UINTN Index;\r
1561 BOOLEAN NeedPromiscuous;\r
18127352 1562 BOOLEAN AcceptPromiscuous;\r
1563 BOOLEAN AcceptBroadcast;\r
1564 BOOLEAN MultiCastUpdate;\r
a3bcde70
HT		 1565\r
1566 if (This == NULL || NewFilter == NULL) {\r
1567 return EFI_INVALID_PARAMETER;\r
1568 }\r
1569\r
1570 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
1571 Mode = Private->PxeBc.Mode;\r
1572 Status = EFI_SUCCESS;\r
1573 NeedPromiscuous = FALSE;\r
1574\r
1575 if (!Mode->Started) {\r
1576 return EFI_NOT_STARTED;\r
1577 }\r
1578\r
1579 for (Index = 0; Index < NewFilter->IpCnt; Index++) {\r
1580 ASSERT (Index < EFI_PXE_BASE_CODE_MAX_IPCNT);\r
1581 if (!Mode->UsingIpv6 &&\r
1582 IP4_IS_LOCAL_BROADCAST (EFI_IP4 (NewFilter->IpList[Index].v4))) {\r
1583 //\r
1584 // IPv4 broadcast address should not be in IP filter.\r
1585 //\r
1586 return EFI_INVALID_PARAMETER;\r
1587 }\r
1588 if ((NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP) != 0 &&\r
1589 (NetIp4IsUnicast (EFI_IP4 (NewFilter->IpList[Index].v4), 0) ||\r
1590 NetIp6IsValidUnicast (&NewFilter->IpList[Index].v6))) {\r
1591 //\r
1592 // If EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP is set and IPv4/IPv6 address\r
1593 // is in IpList, promiscuous mode is needed.\r
1594 //\r
1595 NeedPromiscuous = TRUE;\r
1596 }\r
1597 }\r
1598\r
18127352 1599 AcceptPromiscuous = FALSE;\r
1600 AcceptBroadcast = FALSE;\r
1601 MultiCastUpdate = FALSE;\r
a3bcde70
HT		 1602\r
1603 if (NeedPromiscuous ||\r
1604 (NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_PROMISCUOUS) != 0 ||\r
1605 (NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_PROMISCUOUS_MULTICAST) != 0) {\r
1606 //\r
1607 // Configure UDPv4/UDPv6 as promiscuous mode to receive all packets.\r
1608 //\r
18127352 1609 AcceptPromiscuous = TRUE;\r
a3bcde70
HT		 1610 } else if ((NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_BROADCAST) != 0) {\r
1611 //\r
1612 // Configure UDPv4 to receive all broadcast packets.\r
1613 //\r
18127352 1614 AcceptBroadcast = TRUE;\r
a3bcde70
HT		 1615 }\r
1616\r
1617 //\r
18127352 1618 // In multicast condition when Promiscuous FALSE and IpCnt no-zero.\r
1619 // Here check if there is any update of the multicast ip address. If yes,\r
1620 // we need leave the old multicast group (by Config UDP instance to NULL),\r
1621 // and join the new multicast group.\r
a3bcde70 1622 //\r
18127352 1623 if (!AcceptPromiscuous) {\r
1624 if ((NewFilter->Filters & EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP) != 0) {\r
1625 if (Mode->IpFilter.IpCnt != NewFilter->IpCnt) {\r
1626 MultiCastUpdate = TRUE;\r
1627 } else if (CompareMem (Mode->IpFilter.IpList, NewFilter->IpList, NewFilter->IpCnt * sizeof (EFI_IP_ADDRESS)) != 0 ) {\r
1628 MultiCastUpdate = TRUE;\r
1629 }\r
1630 }\r
a3bcde70
HT		 1631 }\r
1632\r
18127352 1633 if (!Mode->UsingIpv6) {\r
1634 //\r
1635 // Check whether we need reconfigure the UDP4 instance.\r
1636 //\r
1637 Udp4Cfg = &Private->Udp4CfgData;\r
1638 if ((AcceptPromiscuous != Udp4Cfg->AcceptPromiscuous) ||\r
1639 (AcceptBroadcast != Udp4Cfg->AcceptBroadcast) || MultiCastUpdate) {\r
1640 //\r
1641 // Clear the UDP4 instance configuration, all joined groups will be left\r
1642 // during the operation.\r
a3bcde70 1643 //\r
18127352 1644 Private->Udp4Read->Configure (Private->Udp4Read, NULL);\r
1645 \r
a3bcde70 1646 //\r
18127352 1647 // Configure the UDP instance with the new configuration.\r
1648 //\r
1649 Udp4Cfg->AcceptPromiscuous = AcceptPromiscuous;\r
1650 Udp4Cfg->AcceptBroadcast = AcceptBroadcast;\r
1651 Status = Private->Udp4Read->Configure (Private->Udp4Read, Udp4Cfg);\r
1652 if (EFI_ERROR (Status)) {\r
1653 return Status;\r
1654 }\r
1655 \r
1656 //\r
1657 // In not Promiscuous mode, need to join the new multicast group.\r
1658 //\r
1659 if (!AcceptPromiscuous) {\r
1660 for (Index = 0; Index < NewFilter->IpCnt; ++Index) {\r
1661 if (IP4_IS_MULTICAST (EFI_NTOHL (NewFilter->IpList[Index].v4))) {\r
1662 //\r
1663 // Join the mutilcast group.\r
1664 //\r
1665 Status = Private->Udp4Read->Groups (Private->Udp4Read, TRUE, &NewFilter->IpList[Index].v4);\r
1666 if (EFI_ERROR (Status)) {\r
1667 return Status;\r
1668 }\r
a3bcde70
HT		 1669 }\r
1670 }\r
18127352 1671 }\r
1672 }\r
1673 } else {\r
1674 //\r
1675 // Check whether we need reconfigure the UDP6 instance.\r
1676 //\r
1677 Udp6Cfg = &Private->Udp6CfgData;\r
1678 if ((AcceptPromiscuous != Udp6Cfg->AcceptPromiscuous) || MultiCastUpdate) {\r
1679 //\r
1680 // Clear the UDP6 instance configuration, all joined groups will be left\r
1681 // during the operation.\r
1682 //\r
1683 Private->Udp6Read->Configure (Private->Udp6Read, NULL);\r
1684 \r
1685 //\r
1686 // Configure the UDP instance with the new configuration.\r
1687 //\r
1688 Udp6Cfg->AcceptPromiscuous = AcceptPromiscuous;\r
1689 Status = Private->Udp6Read->Configure (Private->Udp6Read, Udp6Cfg);\r
1690 if (EFI_ERROR (Status)) {\r
1691 return Status;\r
1692 }\r
1693 \r
1694 //\r
1695 // In not Promiscuous mode, need to join the new multicast group.\r
1696 //\r
1697 if (!AcceptPromiscuous) {\r
1698 for (Index = 0; Index < NewFilter->IpCnt; ++Index) {\r
1699 if (IP6_IS_MULTICAST (&NewFilter->IpList[Index].v6)) {\r
1700 //\r
1701 // Join the mutilcast group.\r
1702 //\r
1703 Status = Private->Udp6Read->Groups (Private->Udp6Read, TRUE, &NewFilter->IpList[Index].v6);\r
1704 if (EFI_ERROR (Status)) {\r
1705 return Status;\r
1706 }\r
a3bcde70
HT		 1707 }\r
1708 }\r
1709 }\r
1710 }\r
1711 }\r
1712\r
1713 //\r
1714 // Save the new IP filter into mode data.\r
1715 //\r
1716 CopyMem (&Mode->IpFilter, NewFilter, sizeof (Mode->IpFilter));\r
1717\r
a3bcde70
HT		 1718 return Status;\r
1719}\r
1720\r
1721\r
1722/**\r
1723 Uses the ARP protocol to resolve a MAC address. It is not supported for IPv6.\r
1724\r
1725 This function uses the ARP protocol to resolve a MAC address. The IP address specified\r
1726 by IpAddr is used to resolve a MAC address. If the ARP protocol succeeds in resolving\r
1727 the specified address, then the ArpCacheEntries and ArpCache fields of the mode data\r
1728 are updated, and EFI_SUCCESS is returned. If MacAddr is not NULL, the resolved\r
1729 MAC address is placed there as well. If the PXE Base Code protocol is in the\r
1730 stopped state, then EFI_NOT_STARTED is returned. If the ARP protocol encounters\r
1731 a timeout condition while attempting to resolve an address, then EFI_TIMEOUT is\r
1732 returned. If the Callback Protocol does not return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE,\r
1733 then EFI_ABORTED is returned.\r
1734\r
1735 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
1736 @param[in] IpAddr Pointer to the IP address that is used to resolve a MAC address.\r
1737 @param[in] MacAddr If not NULL, a pointer to the MAC address that was resolved with the\r
1738 ARP protocol.\r
1739\r
1740 @retval EFI_SUCCESS The IP or MAC address was resolved.\r
1741 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
1742 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
1743 @retval EFI_DEVICE_ERROR The network device encountered an error during this operation.\r
1744 @retval EFI_ICMP_ERROR An error occur with the ICMP packet message.\r
1745\r
1746**/\r
1747EFI_STATUS\r
1748EFIAPI\r
1749EfiPxeBcArp (\r
1750 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
1751 IN EFI_IP_ADDRESS *IpAddr,\r
1752 IN EFI_MAC_ADDRESS *MacAddr OPTIONAL\r
1753 )\r
1754{\r
1755 PXEBC_PRIVATE_DATA *Private;\r
1756 EFI_PXE_BASE_CODE_MODE *Mode;\r
1757 EFI_EVENT ResolvedEvent;\r
1758 EFI_STATUS Status;\r
1759 EFI_MAC_ADDRESS TempMac;\r
1760 EFI_MAC_ADDRESS ZeroMac;\r
1761 BOOLEAN IsResolved;\r
1762\r
1763 if (This == NULL || IpAddr == NULL) {\r
1764 return EFI_INVALID_PARAMETER;\r
1765 }\r
1766\r
1767 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
1768 Mode = Private->PxeBc.Mode;\r
1769 ResolvedEvent = NULL;\r
1770 Status = EFI_SUCCESS;\r
1771 IsResolved = FALSE;\r
1772\r
1773 if (!Mode->Started) {\r
1774 return EFI_NOT_STARTED;\r
1775 }\r
1776\r
1777 if (Mode->UsingIpv6) {\r
1778 return EFI_UNSUPPORTED;\r
1779 }\r
1780\r
1781 //\r
1782 // Station address should be ready before do arp.\r
1783 //\r
1784 if (!Private->IsAddressOk) {\r
1785 return EFI_INVALID_PARAMETER;\r
1786 }\r
1787\r
1788 Mode->IcmpErrorReceived = FALSE;\r
1789 ZeroMem (&TempMac, sizeof (EFI_MAC_ADDRESS));\r
1790 ZeroMem (&ZeroMac, sizeof (EFI_MAC_ADDRESS));\r
1791\r
1792 if (!Mode->AutoArp) {\r
1793 //\r
1794 // If AutoArp is FALSE, only search in the current Arp cache.\r
1795 //\r
1796 PxeBcArpCacheUpdate (NULL, Private);\r
1797 if (!PxeBcCheckArpCache (Mode, &IpAddr->v4, &TempMac)) {\r
1798 Status = EFI_DEVICE_ERROR;\r
1799 goto ON_EXIT;\r
1800 }\r
1801 } else {\r
1802 Status = gBS->CreateEvent (\r
1803 EVT_NOTIFY_SIGNAL,\r
1804 TPL_NOTIFY,\r
1805 PxeBcCommonNotify,\r
1806 &IsResolved,\r
1807 &ResolvedEvent\r
1808 );\r
1809 if (EFI_ERROR (Status)) {\r
1810 goto ON_EXIT;\r
1811 }\r
1812\r
1813 //\r
1814 // If AutoArp is TRUE, try to send Arp request on initiative.\r
1815 //\r
1816 Status = Private->Arp->Request (Private->Arp, &IpAddr->v4, ResolvedEvent, &TempMac);\r
1817 if (EFI_ERROR (Status) && Status != EFI_NOT_READY) {\r
1818 goto ON_EXIT;\r
1819 }\r
1820\r
1821 while (!IsResolved) {\r
1822 if (CompareMem (&TempMac, &ZeroMac, sizeof (EFI_MAC_ADDRESS)) != 0) {\r
1823 break;\r
1824 }\r
1825 }\r
1826 if (CompareMem (&TempMac, &ZeroMac, sizeof (EFI_MAC_ADDRESS)) != 0) {\r
1827 Status = EFI_SUCCESS;\r
1828 } else {\r
1829 Status = EFI_TIMEOUT;\r
1830 }\r
1831 }\r
1832\r
1833 //\r
1834 // Copy the Mac address to user if needed.\r
1835 //\r
1836 if (MacAddr != NULL && !EFI_ERROR (Status)) {\r
1837 CopyMem (MacAddr, &TempMac, sizeof (EFI_MAC_ADDRESS));\r
1838 }\r
1839\r
1840ON_EXIT:\r
1841 if (ResolvedEvent != NULL) {\r
1842 gBS->CloseEvent (ResolvedEvent);\r
1843 }\r
1844 return Status;\r
1845}\r
1846\r
1847\r
1848/**\r
1849 Updates the parameters that affect the operation of the PXE Base Code Protocol.\r
1850\r
1851 This function sets parameters that affect the operation of the PXE Base Code Protocol.\r
1852 The parameter specified by NewAutoArp is used to control the generation of ARP\r
1853 protocol packets. If NewAutoArp is TRUE, then ARP Protocol packets will be generated\r
1854 as required by the PXE Base Code Protocol. If NewAutoArp is FALSE, then no ARP\r
1855 Protocol packets will be generated. In this case, the only mappings that are\r
1856 available are those stored in the ArpCache of the EFI_PXE_BASE_CODE_MODE structure.\r
1857 If there are not enough mappings in the ArpCache to perform a PXE Base Code Protocol\r
1858 service, then the service will fail. This function updates the AutoArp field of\r
1859 the EFI_PXE_BASE_CODE_MODE structure to NewAutoArp.\r
1860 The SetParameters() call must be invoked after a Callback Protocol is installed\r
1861 to enable the use of callbacks.\r
1862\r
1863 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
1864 @param[in] NewAutoArp If not NULL, a pointer to a value that specifies whether to replace the\r
1865 current value of AutoARP.\r
1866 @param[in] NewSendGUID If not NULL, a pointer to a value that specifies whether to replace the\r
1867 current value of SendGUID.\r
1868 @param[in] NewTTL If not NULL, a pointer to be used in place of the current value of TTL,\r
1869 the "time to live" field of the IP header.\r
1870 @param[in] NewToS If not NULL, a pointer to be used in place of the current value of ToS,\r
1871 the "type of service" field of the IP header.\r
1872 @param[in] NewMakeCallback If not NULL, a pointer to a value that specifies whether to replace the\r
1873 current value of the MakeCallback field of the Mode structure.\r
1874\r
1875 @retval EFI_SUCCESS The new parameters values were updated.\r
1876 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
1877 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
1878\r
1879**/\r
1880EFI_STATUS\r
1881EFIAPI\r
1882EfiPxeBcSetParameters (\r
1883 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
1884 IN BOOLEAN *NewAutoArp OPTIONAL,\r
1885 IN BOOLEAN *NewSendGUID OPTIONAL,\r
1886 IN UINT8 *NewTTL OPTIONAL,\r
1887 IN UINT8 *NewToS OPTIONAL,\r
1888 IN BOOLEAN *NewMakeCallback OPTIONAL\r
1889 )\r
1890{\r
1891 PXEBC_PRIVATE_DATA *Private;\r
1892 EFI_PXE_BASE_CODE_MODE *Mode;\r
1893 EFI_GUID SystemGuid;\r
1894 EFI_STATUS Status;\r
1895\r
1896 if (This == NULL) {\r
1897 return EFI_INVALID_PARAMETER;\r
1898 }\r
1899\r
1900 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
1901 Mode = Private->PxeBc.Mode;\r
1902\r
1903 if (!Mode->Started) {\r
1904 return EFI_NOT_STARTED;\r
1905 }\r
1906\r
1907 if (NewMakeCallback != NULL) {\r
1908 if (*NewMakeCallback) {\r
1909 //\r
1910 // Update the previous PxeBcCallback protocol.\r
1911 //\r
1912 Status = gBS->HandleProtocol (\r
1913 Private->Controller,\r
1914 &gEfiPxeBaseCodeCallbackProtocolGuid,\r
1915 (VOID **) &Private->PxeBcCallback\r
1916 );\r
1917\r
1918 if (EFI_ERROR (Status) || (Private->PxeBcCallback->Callback == NULL)) {\r
1919 return EFI_INVALID_PARAMETER;\r
1920 }\r
1921 } else {\r
1922 Private->PxeBcCallback = NULL;\r
1923 }\r
1924 Mode->MakeCallbacks = *NewMakeCallback;\r
1925 }\r
1926\r
1927 if (NewSendGUID != NULL) {\r
19ddbb25 1928 if (*NewSendGUID && EFI_ERROR (NetLibGetSystemGuid (&SystemGuid))) {\r
a3bcde70
HT		 1929 return EFI_INVALID_PARAMETER;\r
1930 }\r
1931 Mode->SendGUID = *NewSendGUID;\r
1932 }\r
1933\r
1934 if (NewAutoArp != NULL) {\r
1935 Mode->AutoArp = *NewAutoArp;\r
1936 }\r
1937\r
1938 if (NewTTL != NULL) {\r
1939 Mode->TTL = *NewTTL;\r
1940 }\r
1941\r
1942 if (NewToS != NULL) {\r
1943 Mode->ToS = *NewToS;\r
1944 }\r
1945\r
1946 return EFI_SUCCESS;\r
1947}\r
1948\r
1949\r
1950/**\r
1951 Updates the station IP address and/or subnet mask values of a network device.\r
1952\r
1953 This function updates the station IP address and/or subnet mask values of a network\r
1954 device. The NewStationIp field is used to modify the network device's current IP address.\r
1955 If NewStationIP is NULL, then the current IP address will not be modified. Otherwise,\r
1956 this function updates the StationIp field of the EFI_PXE_BASE_CODE_MODE structure\r
1957 with NewStationIp. The NewSubnetMask field is used to modify the network device's current subnet\r
1958 mask. If NewSubnetMask is NULL, then the current subnet mask will not be modified.\r
1959 Otherwise, this function updates the SubnetMask field of the EFI_PXE_BASE_CODE_MODE\r
1960 structure with NewSubnetMask.\r
1961\r
1962 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
1963 @param[in] NewStationIp Pointer to the new IP address to be used by the network device.\r
1964 @param[in] NewSubnetMask Pointer to the new subnet mask to be used by the network device.\r
1965\r
1966 @retval EFI_SUCCESS The new station IP address and/or subnet mask were updated.\r
1967 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
1968 @retval EFI_INVALID_PARAMETER One or more parameters are invalid.\r
1969\r
1970**/\r
1971EFI_STATUS\r
1972EFIAPI\r
1973EfiPxeBcSetStationIP (\r
1974 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
1975 IN EFI_IP_ADDRESS *NewStationIp OPTIONAL,\r
1976 IN EFI_IP_ADDRESS *NewSubnetMask OPTIONAL\r
1977 )\r
1978{\r
1979 EFI_STATUS Status;\r
1980 PXEBC_PRIVATE_DATA *Private;\r
1981 EFI_PXE_BASE_CODE_MODE *Mode;\r
1982 EFI_ARP_CONFIG_DATA ArpConfigData;\r
1983\r
1984 if (This == NULL) {\r
1985 return EFI_INVALID_PARAMETER;\r
1986 }\r
1987\r
1988 if (NewStationIp != NULL &&\r
1989 (!NetIp4IsUnicast (NTOHL (NewStationIp->Addr[0]), 0) &&\r
1990 !NetIp6IsValidUnicast (&NewStationIp->v6))) {\r
1991 return EFI_INVALID_PARAMETER;\r
1992 }\r
1993\r
1994 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
1995 Mode = Private->PxeBc.Mode;\r
1996 Status = EFI_SUCCESS;\r
1997\r
1998 if (!Mode->UsingIpv6 &&\r
1999 NewSubnetMask != NULL &&\r
2000 !IP4_IS_VALID_NETMASK (NTOHL (NewSubnetMask->Addr[0]))) {\r
2001 return EFI_INVALID_PARAMETER;\r
2002 }\r
2003\r
2004 if (!Mode->Started) {\r
2005 return EFI_NOT_STARTED;\r
2006 }\r
2007\r
2008 if (Mode->UsingIpv6 && NewStationIp != NULL) {\r
2009 //\r
2010 // Set the IPv6 address by Ip6Config protocol.\r
2011 //\r
2012 Status = PxeBcRegisterIp6Address (Private, &NewStationIp->v6);\r
2013 if (EFI_ERROR (Status)) {\r
2014 goto ON_EXIT;\r
2015 }\r
2016 } else if (!Mode->UsingIpv6 && NewStationIp != NULL) {\r
2017 //\r
2018 // Configure the corresponding ARP with the IPv4 address.\r
2019 //\r
2020 ZeroMem (&ArpConfigData, sizeof (EFI_ARP_CONFIG_DATA));\r
2021\r
2022 ArpConfigData.SwAddressType = 0x0800;\r
2023 ArpConfigData.SwAddressLength = (UINT8) sizeof (EFI_IPv4_ADDRESS);\r
2024 ArpConfigData.StationAddress = &NewStationIp->v4;\r
2025\r
2026 Private->Arp->Configure (Private->Arp, NULL);\r
2027 Private->Arp->Configure (Private->Arp, &ArpConfigData);\r
2028\r
2029 if (NewSubnetMask != NULL) {\r
2030 Mode->RouteTableEntries = 1;\r
2031 Mode->RouteTable[0].IpAddr.Addr[0] = NewStationIp->Addr[0] & NewSubnetMask->Addr[0];\r
2032 Mode->RouteTable[0].SubnetMask.Addr[0] = NewSubnetMask->Addr[0];\r
2033 Mode->RouteTable[0].GwAddr.Addr[0] = 0;\r
2034 }\r
2035\r
2036 Private->IsAddressOk = TRUE;\r
2037 }\r
2038\r
2039 if (NewStationIp != NULL) {\r
2040 CopyMem (&Mode->StationIp, NewStationIp, sizeof (EFI_IP_ADDRESS));\r
2041 CopyMem (&Private->StationIp, NewStationIp, sizeof (EFI_IP_ADDRESS));\r
2042 }\r
2043\r
2044 if (!Mode->UsingIpv6 && NewSubnetMask != NULL) {\r
2045 CopyMem (&Mode->SubnetMask, NewSubnetMask, sizeof (EFI_IP_ADDRESS));\r
2046 CopyMem (&Private->SubnetMask ,NewSubnetMask, sizeof (EFI_IP_ADDRESS));\r
2047 }\r
2048\r
0e7f6f50 2049 Status = PxeBcFlushStationIp (Private, NewStationIp, NewSubnetMask);\r
a3bcde70
HT		 2050ON_EXIT:\r
2051 return Status;\r
2052}\r
2053\r
2054\r
2055/**\r
2056 Updates the contents of the cached DHCP and Discover packets.\r
2057\r
2058 The pointers to the new packets are used to update the contents of the cached\r
2059 packets in the EFI_PXE_BASE_CODE_MODE structure.\r
2060\r
2061 @param[in] This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.\r
2062 @param[in] NewDhcpDiscoverValid Pointer to a value that will replace the current\r
2063 DhcpDiscoverValid field.\r
2064 @param[in] NewDhcpAckReceived Pointer to a value that will replace the current\r
2065 DhcpAckReceived field.\r
2066 @param[in] NewProxyOfferReceived Pointer to a value that will replace the current\r
2067 ProxyOfferReceived field.\r
2068 @param[in] NewPxeDiscoverValid Pointer to a value that will replace the current\r
2069 ProxyOfferReceived field.\r
2070 @param[in] NewPxeReplyReceived Pointer to a value that will replace the current\r
2071 PxeReplyReceived field.\r
2072 @param[in] NewPxeBisReplyReceived Pointer to a value that will replace the current\r
2073 PxeBisReplyReceived field.\r
2074 @param[in] NewDhcpDiscover Pointer to the new cached DHCP Discover packet contents.\r
2075 @param[in] NewDhcpAck Pointer to the new cached DHCP Ack packet contents.\r
2076 @param[in] NewProxyOffer Pointer to the new cached Proxy Offer packet contents.\r
2077 @param[in] NewPxeDiscover Pointer to the new cached PXE Discover packet contents.\r
2078 @param[in] NewPxeReply Pointer to the new cached PXE Reply packet contents.\r
2079 @param[in] NewPxeBisReply Pointer to the new cached PXE BIS Reply packet contents.\r
2080\r
2081 @retval EFI_SUCCESS The cached packet contents were updated.\r
2082 @retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.\r
2083 @retval EFI_INVALID_PARAMETER This is NULL or does not point to a valid\r
2084 EFI_PXE_BASE_CODE_PROTOCOL structure.\r
2085\r
2086**/\r
2087EFI_STATUS\r
2088EFIAPI\r
2089EfiPxeBcSetPackets (\r
2090 IN EFI_PXE_BASE_CODE_PROTOCOL *This,\r
2091 IN BOOLEAN *NewDhcpDiscoverValid OPTIONAL,\r
2092 IN BOOLEAN *NewDhcpAckReceived OPTIONAL,\r
2093 IN BOOLEAN *NewProxyOfferReceived OPTIONAL,\r
2094 IN BOOLEAN *NewPxeDiscoverValid OPTIONAL,\r
2095 IN BOOLEAN *NewPxeReplyReceived OPTIONAL,\r
2096 IN BOOLEAN *NewPxeBisReplyReceived OPTIONAL,\r
2097 IN EFI_PXE_BASE_CODE_PACKET *NewDhcpDiscover OPTIONAL,\r
2098 IN EFI_PXE_BASE_CODE_PACKET *NewDhcpAck OPTIONAL,\r
2099 IN EFI_PXE_BASE_CODE_PACKET *NewProxyOffer OPTIONAL,\r
2100 IN EFI_PXE_BASE_CODE_PACKET *NewPxeDiscover OPTIONAL,\r
2101 IN EFI_PXE_BASE_CODE_PACKET *NewPxeReply OPTIONAL,\r
2102 IN EFI_PXE_BASE_CODE_PACKET *NewPxeBisReply OPTIONAL\r
2103 )\r
2104{\r
2105 PXEBC_PRIVATE_DATA *Private;\r
2106 EFI_PXE_BASE_CODE_MODE *Mode;\r
2107\r
2108 if (This == NULL) {\r
2109 return EFI_INVALID_PARAMETER;\r
2110 }\r
2111\r
2112 Private = PXEBC_PRIVATE_DATA_FROM_PXEBC (This);\r
2113 Mode = Private->PxeBc.Mode;\r
2114\r
2115 if (!Mode->Started) {\r
2116 return EFI_NOT_STARTED;\r
2117 }\r
2118\r
2119 if (NewDhcpDiscoverValid != NULL) {\r
2120 Mode->DhcpDiscoverValid = *NewDhcpDiscoverValid;\r
2121 }\r
2122\r
2123 if (NewDhcpAckReceived != NULL) {\r
2124 Mode->DhcpAckReceived = *NewDhcpAckReceived;\r
2125 }\r
2126\r
2127 if (NewProxyOfferReceived != NULL) {\r
2128 Mode->ProxyOfferReceived = *NewProxyOfferReceived;\r
2129 }\r
2130\r
2131 if (NewPxeDiscoverValid != NULL) {\r
2132 Mode->PxeDiscoverValid = *NewPxeDiscoverValid;\r
2133 }\r
2134\r
2135 if (NewPxeReplyReceived != NULL) {\r
2136 Mode->PxeReplyReceived = *NewPxeReplyReceived;\r
2137 }\r
2138\r
2139 if (NewPxeBisReplyReceived != NULL) {\r
2140 Mode->PxeBisReplyReceived = *NewPxeBisReplyReceived;\r
2141 }\r
2142\r
2143 if (NewDhcpDiscover != NULL) {\r
2144 CopyMem (&Mode->DhcpDiscover, NewDhcpDiscover, sizeof (EFI_PXE_BASE_CODE_PACKET));\r
2145 }\r
2146\r
2147 if (NewDhcpAck != NULL) {\r
2148 CopyMem (&Mode->DhcpAck, NewDhcpAck, sizeof (EFI_PXE_BASE_CODE_PACKET));\r
2149 }\r
2150\r
2151 if (NewProxyOffer != NULL) {\r
2152 CopyMem (&Mode->ProxyOffer, NewProxyOffer, sizeof (EFI_PXE_BASE_CODE_PACKET));\r
2153 }\r
2154\r
2155 if (NewPxeDiscover != NULL) {\r
2156 CopyMem (&Mode->PxeDiscover, NewPxeDiscover, sizeof (EFI_PXE_BASE_CODE_PACKET));\r
2157 }\r
2158\r
2159 if (NewPxeReply != NULL) {\r
2160 CopyMem (&Mode->PxeReply, NewPxeReply, sizeof (EFI_PXE_BASE_CODE_PACKET));\r
2161 }\r
2162\r
2163 if (NewPxeBisReply != NULL) {\r
2164 CopyMem (&Mode->PxeBisReply, NewPxeBisReply, sizeof (EFI_PXE_BASE_CODE_PACKET));\r
2165 }\r
2166\r
2167 return EFI_SUCCESS;\r
2168}\r
2169\r
2170EFI_PXE_BASE_CODE_PROTOCOL gPxeBcProtocolTemplate = {\r
2171 EFI_PXE_BASE_CODE_PROTOCOL_REVISION,\r
2172 EfiPxeBcStart,\r
2173 EfiPxeBcStop,\r
2174 EfiPxeBcDhcp,\r
2175 EfiPxeBcDiscover,\r
2176 EfiPxeBcMtftp,\r
2177 EfiPxeBcUdpWrite,\r
2178 EfiPxeBcUdpRead,\r
2179 EfiPxeBcSetIpFilter,\r
2180 EfiPxeBcArp,\r
2181 EfiPxeBcSetParameters,\r
2182 EfiPxeBcSetStationIP,\r
2183 EfiPxeBcSetPackets,\r
2184 NULL\r
2185};\r
2186\r
2187\r
2188/**\r
2189 Callback function that is invoked when the PXE Base Code Protocol is about to transmit, has\r
2190 received, or is waiting to receive a packet.\r
2191\r
2192 This function is invoked when the PXE Base Code Protocol is about to transmit, has received,\r
2193 or is waiting to receive a packet. Parameters Function and Received specify the type of event.\r
2194 Parameters PacketLen and Packet specify the packet that generated the event. If these fields\r
2195 are zero and NULL respectively, then this is a status update callback. If the operation specified\r
2196 by Function is to continue, then CALLBACK_STATUS_CONTINUE should be returned. If the operation\r
2197 specified by Function should be aborted, then CALLBACK_STATUS_ABORT should be returned. Due to\r
2198 the polling nature of UEFI device drivers, a callback function should not execute for more than 5 ms.\r
2199 The SetParameters() function must be called after a Callback Protocol is installed to enable the\r
2200 use of callbacks.\r
2201\r
2202 @param[in] This Pointer to the EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL instance.\r
2203 @param[in] Function The PXE Base Code Protocol function that is waiting for an event.\r
2204 @param[in] Received TRUE if the callback is being invoked due to a receive event. FALSE if\r
2205 the callback is being invoked due to a transmit event.\r
2206 @param[in] PacketLength The length, in bytes, of Packet. This field will have a value of zero if\r
2207 this is a wait for receive event.\r
2208 @param[in] PacketPtr If Received is TRUE, a pointer to the packet that was just received;\r
2209 otherwise a pointer to the packet that is about to be transmitted.\r
2210\r
2211 @retval EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE If Function specifies a continue operation.\r
2212 @retval EFI_PXE_BASE_CODE_CALLBACK_STATUS_ABORT If Function specifies an abort operation.\r
2213\r
2214**/\r
2215EFI_PXE_BASE_CODE_CALLBACK_STATUS\r
2216EFIAPI\r
2217EfiPxeLoadFileCallback (\r
2218 IN EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL *This,\r
2219 IN EFI_PXE_BASE_CODE_FUNCTION Function,\r
2220 IN BOOLEAN Received,\r
2221 IN UINT32 PacketLength,\r
2222 IN EFI_PXE_BASE_CODE_PACKET *PacketPtr OPTIONAL\r
2223 )\r
2224{\r
2225 EFI_INPUT_KEY Key;\r
2226 EFI_STATUS Status;\r
2227\r
2228 //\r
2229 // Catch Ctrl-C or ESC to abort.\r
2230 //\r
2231 Status = gST->ConIn->ReadKeyStroke (gST->ConIn, &Key);\r
2232\r
2233 if (!EFI_ERROR (Status)) {\r
2234\r
2235 if (Key.ScanCode == SCAN_ESC || Key.UnicodeChar == (0x1F & 'c')) {\r
2236\r
2237 return EFI_PXE_BASE_CODE_CALLBACK_STATUS_ABORT;\r
2238 }\r
2239 }\r
2240 //\r
2241 // No print if receive packet\r
2242 //\r
2243 if (Received) {\r
2244 return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;\r
2245 }\r
2246 //\r
2247 // Print only for three functions\r
2248 //\r
2249 switch (Function) {\r
2250\r
2251 case EFI_PXE_BASE_CODE_FUNCTION_MTFTP:\r
2252 //\r
2253 // Print only for open MTFTP packets, not every MTFTP packets\r
2254 //\r
2255 if (PacketLength != 0 && PacketPtr != NULL) {\r
2256 if (PacketPtr->Raw[0x1C] != 0x00 || PacketPtr->Raw[0x1D] != 0x01) {\r
2257 return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;\r
2258 }\r
2259 }\r
2260 break;\r
2261\r
2262 case EFI_PXE_BASE_CODE_FUNCTION_DHCP:\r
2263 case EFI_PXE_BASE_CODE_FUNCTION_DISCOVER:\r
2264 break;\r
2265\r
2266 default:\r
2267 return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;\r
2268 }\r
2269\r
2270 if (PacketLength != 0 && PacketPtr != NULL) {\r
2271 //\r
2272 // Print '.' when transmit a packet\r
2273 //\r
2274 AsciiPrint (".");\r
2275 }\r
2276\r
2277 return EFI_PXE_BASE_CODE_CALLBACK_STATUS_CONTINUE;\r
2278}\r
2279\r
2280EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL gPxeBcCallBackTemplate = {\r
2281 EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL_REVISION,\r
2282 EfiPxeLoadFileCallback\r
2283};\r
2284\r
2285\r
2286/**\r
2287 Causes the driver to load a specified file.\r
2288\r
2289 @param[in] This Protocol instance pointer.\r
2290 @param[in] FilePath The device specific path of the file to load.\r
2291 @param[in] BootPolicy If TRUE, indicates that the request originates from the\r
2292 boot manager is attempting to load FilePath as a boot\r
2293 selection. If FALSE, then FilePath must match an exact file\r
2294 to be loaded.\r
2295 @param[in, out] BufferSize On input the size of Buffer in bytes. On output with a return\r
2296 code of EFI_SUCCESS, the amount of data transferred to\r
2297 Buffer. On output with a return code of EFI_BUFFER_TOO_SMALL,\r
2298 the size of Buffer required to retrieve the requested file.\r
2299 @param[in] Buffer The memory buffer to transfer the file to. IF Buffer is NULL,\r
2300 then no the size of the requested file is returned in\r
2301 BufferSize.\r
2302\r
2303 @retval EFI_SUCCESS The file was loaded.\r
2304 @retval EFI_UNSUPPORTED The device does not support the provided BootPolicy.\r
2305 @retval EFI_INVALID_PARAMETER FilePath is not a valid device path, or\r
2306 BufferSize is NULL.\r
2307 @retval EFI_NO_MEDIA No medium was present to load the file.\r
2308 @retval EFI_DEVICE_ERROR The file was not loaded due to a device error.\r
2309 @retval EFI_NO_RESPONSE The remote system did not respond.\r
2310 @retval EFI_NOT_FOUND The file was not found.\r
2311 @retval EFI_ABORTED The file load process was manually cancelled.\r
2312\r
2313**/\r
2314EFI_STATUS\r
2315EFIAPI\r
2316EfiPxeLoadFile (\r
2317 IN EFI_LOAD_FILE_PROTOCOL *This,\r
2318 IN EFI_DEVICE_PATH_PROTOCOL *FilePath,\r
2319 IN BOOLEAN BootPolicy,\r
2320 IN OUT UINTN *BufferSize,\r
2321 IN VOID *Buffer OPTIONAL\r
2322 )\r
2323{\r
2324 PXEBC_PRIVATE_DATA *Private;\r
2325 PXEBC_VIRTUAL_NIC *VirtualNic;\r
2326 EFI_PXE_BASE_CODE_PROTOCOL *PxeBc;\r
2327 BOOLEAN UsingIpv6;\r
2328 EFI_STATUS Status;\r
2329 BOOLEAN MediaPresent;\r
2330\r
94d449f5
ZL		 2331 if (FilePath == NULL || !IsDevicePathEnd (FilePath)) {\r
2332 return EFI_INVALID_PARAMETER;\r
2333 }\r
2334 \r
a3bcde70
HT		 2335 VirtualNic = PXEBC_VIRTUAL_NIC_FROM_LOADFILE (This);\r
2336 Private = VirtualNic->Private;\r
2337 PxeBc = &Private->PxeBc;\r
2338 UsingIpv6 = FALSE;\r
2339 Status = EFI_DEVICE_ERROR;\r
2340\r
2341 if (This == NULL || BufferSize == NULL) {\r
2342 return EFI_INVALID_PARAMETER;\r
2343 }\r
2344\r
2345 //\r
2346 // Only support BootPolicy\r
2347 //\r
2348 if (!BootPolicy) {\r
2349 return EFI_UNSUPPORTED;\r
2350 }\r
2351\r
2352 //\r
2353 // Check media status before PXE start\r
2354 //\r
2355 MediaPresent = TRUE;\r
2356 NetLibDetectMedia (Private->Controller, &MediaPresent);\r
2357 if (!MediaPresent) {\r
2358 return EFI_NO_MEDIA;\r
2359 }\r
2360\r
2361 //\r
2362 // Check whether the virtual nic is using IPv6 or not.\r
2363 //\r
2364 if (VirtualNic == Private->Ip6Nic) {\r
2365 UsingIpv6 = TRUE;\r
2366 }\r
2367\r
2368 //\r
2369 // Start Pxe Base Code to initialize PXE boot.\r
2370 //\r
2371 Status = PxeBc->Start (PxeBc, UsingIpv6);\r
75dce340 2372 if (Status == EFI_ALREADY_STARTED && UsingIpv6 != PxeBc->Mode->UsingIpv6) {\r
2373 //\r
2374 // PxeBc protocol has already been started but not on the required IP version, restart it.\r
2375 //\r
2376 Status = PxeBc->Stop (PxeBc);\r
2377 if (!EFI_ERROR (Status)) {\r
2378 Status = PxeBc->Start (PxeBc, UsingIpv6);\r
2379 }\r
2380 }\r
a3bcde70
HT		 2381 if (Status == EFI_SUCCESS || Status == EFI_ALREADY_STARTED) {\r
2382 Status = PxeBcLoadBootFile (Private, BufferSize, Buffer);\r
2383 }\r
2384\r
2385 if (Status != EFI_SUCCESS &&\r
2386 Status != EFI_UNSUPPORTED &&\r
2387 Status != EFI_BUFFER_TOO_SMALL) {\r
2388 //\r
2389 // There are three cases, which needn't stop pxebc here.\r
2390 // 1. success to download file.\r
2391 // 2. success to get file size.\r
2392 // 3. unsupported.\r
2393 //\r
2394 PxeBc->Stop (PxeBc);\r
c4764504
FS		 2395 } else {\r
2396 //\r
2397 // The DHCP4 can have only one configured child instance so we need to stop\r
2398 // reset the DHCP4 child before we return. Otherwise these programs which \r
2399 // also need to use DHCP4 will be impacted.\r
2400 //\r
2401 if (!PxeBc->Mode->UsingIpv6) {\r
2402 Private->Dhcp4->Stop (Private->Dhcp4);\r
2403 Private->Dhcp4->Configure (Private->Dhcp4, NULL);\r
2404 }\r
a3bcde70
HT		 2405 }\r
2406\r
2407 return Status;\r
2408}\r
2409\r
2410EFI_LOAD_FILE_PROTOCOL gLoadFileProtocolTemplate = { EfiPxeLoadFile };\r
2411\r
EFI Development Kit II mirror for PVE