[mirror_edk2.git] / OvmfPkg / OvmfPkgIa32X64.fdf

#/** @file\r
#  Open Virtual Machine Firmware: FDF\r
#\r
#  Copyright (c) 2006 - 2009, Intel Corporation\r
#\r
#  All rights reserved. This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution. The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
#**/\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
[FD.OVMF]\r
BaseAddress   = 0xFFE00000     # The base address of the FLASH Device.\r
Size          = 0x00200000     # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x10000\r
NumBlocks     = 0x20\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
0x0|0x200000\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
FV = MAINFV\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
[FV.DXEFV]\r
BlockSize          = 0x1000\r
FvAlignment        = 16         #FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
#\r
# Files to be placed in DXEFV\r
#\r
# This firmware volume will have files placed in it uncompressed,\r
# and then then entire firmware volume will be compressed in a\r
# single compression operation in order to achieve better\r
# overall compression.\r
#\r
\r
APRIORI DXE {\r
  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
  INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
}\r
\r
#\r
# DXE Phase modules\r
#\r
INF  MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
\r
INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf\r
INF  UefiCpuPkg/CpuIoDxe/CpuIo.inf\r
INF  UefiCpuPkg/CpuDxe/CpuDxe.inf\r
INF  PcAtChipsetPkg/8254TimerDxe/8254Timer.inf\r
INF  PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
INF  PcAtChipsetPkg/KbcResetDxe/Reset.inf\r
INF  MdeModulePkg/Universal/Metronome/Metronome.inf\r
INF  PcAtChipsetPkg/PcRtc/RealTimeClock.inf\r
\r
INF  MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
INF  PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf\r
INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
\r
INF  OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf\r
\r
INF  PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf\r
\r
INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
INF  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
INF  RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf\r
\r
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
    SECTION PE32 = FatBinPkg/EnhancedFatDxe/X64/Fat.efi\r
  }\r
\r
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {\r
    SECTION PE32 = EdkShellBinPkg/FullShell/X64/Shell_full.efi\r
  }\r
\r
FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
      SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
    }\r
  }\r
\r
################################################################################\r
\r
[FV.MAINFV]\r
FvAlignment        = 16\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
#\r
# Files to be placed in MAINFV\r
#\r
# This firmware volume will have all the files placed in it which\r
# must not be compressed at the initial boot phase.  The only\r
# exception to this is the compressed 'DXEFV'.\r
#\r
\r
APRIORI PEI {\r
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
}\r
\r
#\r
#  SEC Phase modules\r
#\r
INF  OvmfPkg/Sec/SecMain.inf\r
\r
#\r
#  PEI Phase modules\r
#\r
INF  MdeModulePkg/Core/Pei/PeiMain.inf\r
INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
INF  OvmfPkg/PlatformPei/PlatformPei.inf\r
INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
#\r
# This file contains the compressed 'DXEFV', which is compressed\r
# in a single compression operation in order to achieve better\r
# overall compression.\r
#\r
FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {\r
   SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
      SECTION FV_IMAGE = DXEFV\r
   }\r
 }\r
\r
FILE RAW = 1BA0062E-C779-4582-8566-336AE8F78F09 {\r
    SECTION RAW = OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    PE32     PE32           |.efi\r
    UI       STRING ="$(MODULE_NAME)" Optional\r
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) {\r
    PE32     PE32           |.efi\r
    UI       STRING ="$(MODULE_NAME)" Optional\r
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional        |.depex\r
     PE32      PE32                      |.efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) {\r
    PEI_DEPEX PEI_DEPEX Optional         |.depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                     |.efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
      VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32           |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_DRIVER.ACPITABLE]\r
  FILE FREEFORM = $(NAMED_GUID) {\r
    RAW ACPI               |.acpi\r
    RAW ASL                |.aml\r
  }\r
\r
[Rule.Common.SEC.RESET_VECTOR]\r
  FILE RAW = $(NAMED_GUID) {\r
    RAW RAW                |.raw\r
  }\r
\r
Commit	Line	Data
49ba9447	1	#/** @file\r
	2	# Open Virtual Machine Firmware: FDF\r
	3	#\r
	4	# Copyright (c) 2006 - 2009, Intel Corporation\r
	5	#\r
	6	# All rights reserved. This program and the accompanying materials\r
	7	# are licensed and made available under the terms and conditions of the BSD License\r
	8	# which accompanies this distribution. The full text of the license may be found at\r
	9	# http://opensource.org/licenses/bsd-license.php\r
	10	#\r
	11	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	12	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	13	#\r
	14	#**/\r
	15	\r
	16	################################################################################\r
	17	#\r
	18	# FD Section\r
	19	# The [FD] Section is made up of the definition statements and a\r
	20	# description of what goes into the Flash Device Image. Each FD section\r
	21	# defines one flash "device" image. A flash device image may be one of\r
	22	# the following: Removable media bootable image (like a boot floppy\r
	23	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	24	# card,) a System "Flash" image (that would be burned into a system's\r
	25	# flash) or an Update ("Capsule") image that will be used to update and\r
	26	# existing system flash.\r
	27	#\r
	28	################################################################################\r
	29	[FD.OVMF]\r
	30	BaseAddress = 0xFFE00000 # The base address of the FLASH Device.\r
	31	Size = 0x00200000 # The size in bytes of the FLASH Device\r
	32	ErasePolarity = 1\r
	33	BlockSize = 0x10000\r
	34	NumBlocks = 0x20\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	0x0\|0x200000\r
	52	gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase\|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
	53	FV = MAINFV\r
	54	\r
	55	################################################################################\r
	56	#\r
	57	# FV Section\r
	58	#\r
	59	# [FV] section is used to define what components or modules are placed within a flash\r
	60	# device file. This section also defines order the components and modules are positioned\r
	61	# within the image. The [FV] section consists of define statements, set statements and\r
	62	# module statements.\r
	63	#\r
	64	################################################################################\r
65	[FV.DXEFV]\r
66	BlockSize = 0x1000\r
67	FvAlignment = 16 #FV alignment and FV attributes setting.\r
68	ERASE_POLARITY = 1\r
69	MEMORY_MAPPED = TRUE\r
70	STICKY_WRITE = TRUE\r
71	LOCK_CAP = TRUE\r
72	LOCK_STATUS = TRUE\r
73	WRITE_DISABLED_CAP = TRUE\r
74	WRITE_ENABLED_CAP = TRUE\r
75	WRITE_STATUS = TRUE\r
76	WRITE_LOCK_CAP = TRUE\r
77	WRITE_LOCK_STATUS = TRUE\r
78	READ_DISABLED_CAP = TRUE\r
79	READ_ENABLED_CAP = TRUE\r
80	READ_STATUS = TRUE\r
81	READ_LOCK_CAP = TRUE\r
82	READ_LOCK_STATUS = TRUE\r
83	\r
84	#\r
85	# Files to be placed in DXEFV\r
86	#\r
87	# This firmware volume will have files placed in it uncompressed,\r
88	# and then then entire firmware volume will be compressed in a\r
89	# single compression operation in order to achieve better\r
90	# overall compression.\r
91	#\r
92	\r
93	APRIORI DXE {\r
94	INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
95	INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
96	}\r
97	\r
98	#\r
99	# DXE Phase modules\r
100	#\r
101	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
102	\r
103	INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
104	INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
105	\r
106	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
107	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
108	INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
109	INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
110	INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf\r
111	INF UefiCpuPkg/CpuIoDxe/CpuIo.inf\r
112	INF UefiCpuPkg/CpuDxe/CpuDxe.inf\r
113	INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf\r
114	INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf\r
115	INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
116	INF PcAtChipsetPkg/KbcResetDxe/Reset.inf\r
117	INF MdeModulePkg/Universal/Metronome/Metronome.inf\r
118	INF PcAtChipsetPkg/PcRtc/RealTimeClock.inf\r
119	\r
120	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
121	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
122	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
123	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
124	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
125	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
126	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
127	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
128	INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
129	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
130	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
131	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
132	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
133	INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
134	INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
135	INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
136	INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf\r
137	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
138	INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
139	\r
140	INF OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf\r
141	\r
142	INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf\r
143	INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf\r
144	INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf\r
145	INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf\r
146	INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf\r
147	\r
148	INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
149	INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
150	INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf\r
151	\r
152	FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
153	SECTION PE32 = FatBinPkg/EnhancedFatDxe/X64/Fat.efi\r
154	}\r
155	\r
156	FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {\r
157	SECTION PE32 = EdkShellBinPkg/FullShell/X64/Shell_full.efi\r
158	}\r
159	\r
160	FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {\r
161	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
162	SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
163	}\r
164	}\r
165	\r
166	################################################################################\r
167	\r
168	[FV.MAINFV]\r
169	FvAlignment = 16\r
170	ERASE_POLARITY = 1\r
171	MEMORY_MAPPED = TRUE\r
172	STICKY_WRITE = TRUE\r
173	LOCK_CAP = TRUE\r
174	LOCK_STATUS = TRUE\r
175	WRITE_DISABLED_CAP = TRUE\r
176	WRITE_ENABLED_CAP = TRUE\r
177	WRITE_STATUS = TRUE\r
178	WRITE_LOCK_CAP = TRUE\r
179	WRITE_LOCK_STATUS = TRUE\r
180	READ_DISABLED_CAP = TRUE\r
181	READ_ENABLED_CAP = TRUE\r
182	READ_STATUS = TRUE\r
183	READ_LOCK_CAP = TRUE\r
184	READ_LOCK_STATUS = TRUE\r
185	\r
186	#\r
187	# Files to be placed in MAINFV\r
188	#\r
189	# This firmware volume will have all the files placed in it which\r
190	# must not be compressed at the initial boot phase. The only\r
191	# exception to this is the compressed 'DXEFV'.\r
192	#\r
193	\r
194	APRIORI PEI {\r
195	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
196	}\r
197	\r
198	#\r
199	# SEC Phase modules\r
200	#\r
201	INF OvmfPkg/Sec/SecMain.inf\r
202	\r
203	#\r
204	# PEI Phase modules\r
205	#\r
206	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
207	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
208	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
209	INF OvmfPkg/PlatformPei/PlatformPei.inf\r
210	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
211	\r
212	#\r
213	# This file contains the compressed 'DXEFV', which is compressed\r
214	# in a single compression operation in order to achieve better\r
215	# overall compression.\r
216	#\r
217	FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {\r
218	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
219	SECTION FV_IMAGE = DXEFV\r
220	}\r
221	}\r
222	\r
223	FILE RAW = 1BA0062E-C779-4582-8566-336AE8F78F09 {\r
224	SECTION RAW = OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw\r
225	}\r
226	\r
227	\r
228	################################################################################\r
229	#\r
230	# Rules are use with the [FV] section's module INF type to define\r
231	# how an FFS file is created for a given INF file. The following Rule are the default\r
232	# rules for the different module type. User can add the customized rules to define the\r
233	# content of the FFS file.\r
234	#\r
235	################################################################################\r
236	\r
237	[Rule.Common.PEI_CORE]\r
238	FILE PEI_CORE = $(NAMED_GUID) {\r
239	PE32 PE32 \|.efi\r
240	UI STRING ="$(MODULE_NAME)" Optional\r
241	VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
242	}\r
243	\r
244	[Rule.Common.SEC]\r
245	FILE SEC = $(NAMED_GUID) {\r
246	PE32 PE32 \|.efi\r
247	UI STRING ="$(MODULE_NAME)" Optional\r
248	VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
249	}\r
250	\r
251	[Rule.Common.PEIM]\r
252	FILE PEIM = $(NAMED_GUID) {\r
253	PEI_DEPEX PEI_DEPEX Optional \|.depex\r
254	PE32 PE32 \|.efi\r
255	UI STRING="$(MODULE_NAME)" Optional\r
256	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
257	}\r
258	\r
259	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
260	FILE PEIM = $(NAMED_GUID) {\r
261	PEI_DEPEX PEI_DEPEX Optional \|.depex\r
262	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
263	PE32 PE32 \|.efi\r
264	UI STRING="$(MODULE_NAME)" Optional\r
265	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
266	}\r
267	}\r
268	\r
269	[Rule.Common.DXE_CORE]\r
270	FILE DXE_CORE = $(NAMED_GUID) {\r
271	PE32 PE32 \|.efi\r
272	UI STRING="$(MODULE_NAME)" Optional\r
273	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
274	}\r
275	\r
276	[Rule.Common.UEFI_DRIVER]\r
277	FILE DRIVER = $(NAMED_GUID) {\r
278	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
279	PE32 PE32 \|.efi\r
280	UI STRING="$(MODULE_NAME)" Optional\r
281	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
282	}\r
283	\r
284	[Rule.Common.DXE_DRIVER]\r
285	FILE DRIVER = $(NAMED_GUID) {\r
286	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
287	PE32 PE32 \|.efi\r
288	UI STRING="$(MODULE_NAME)" Optional\r
289	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
290	}\r
291	\r
292	[Rule.Common.DXE_RUNTIME_DRIVER]\r
293	FILE DRIVER = $(NAMED_GUID) {\r
294	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
295	PE32 PE32 \|.efi\r
296	UI STRING="$(MODULE_NAME)" Optional\r
297	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
298	}\r
299	\r
300	[Rule.Common.UEFI_APPLICATION]\r
301	FILE APPLICATION = $(NAMED_GUID) {\r
302	PE32 PE32 \|.efi\r
303	UI STRING="$(MODULE_NAME)" Optional\r
304	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
305	}\r
306	\r
307	[Rule.Common.DXE_DRIVER.ACPITABLE]\r
308	FILE FREEFORM = $(NAMED_GUID) {\r
309	RAW ACPI \|.acpi\r
310	RAW ASL \|.aml\r
311	}\r
312	\r
313	[Rule.Common.SEC.RESET_VECTOR]\r
314	FILE RAW = $(NAMED_GUID) {\r
315	RAW RAW \|.raw\r
316	}\r
317	\r