[mirror_edk2.git] / SecurityPkg / Library / Tpm2DeviceLibDTpm / Tpm2Ptp.c

/** @file\r
  PTP (Platform TPM Profile) CRB (Command Response Buffer) interface used by dTPM2.0 library.\r
\r
Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR>\r
Copyright (c), Microsoft Corporation.\r
SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#include <IndustryStandard/Tpm20.h>\r
\r
#include <Library/BaseLib.h>\r
#include <Library/BaseMemoryLib.h>\r
#include <Library/IoLib.h>\r
#include <Library/TimerLib.h>\r
#include <Library/DebugLib.h>\r
#include <Library/Tpm2DeviceLib.h>\r
#include <Library/PcdLib.h>\r
\r
#include <IndustryStandard/TpmPtp.h>\r
#include <IndustryStandard/TpmTis.h>\r
\r
#include "Tpm2DeviceLibDTpm.h"\r
\r
//\r
// Execution of the command may take from several seconds to minutes for certain\r
// commands, such as key generation.\r
//\r
#define PTP_TIMEOUT_MAX  (90000 * 1000)             // 90s\r
\r
//\r
// Max TPM command/response length\r
//\r
#define TPMCMDBUFLENGTH  0x500\r
\r
//\r
// Max retry count according to Spec TCG PC Client Device Driver Design Principles\r
// for TPM2.0, Version 1.1, Revision 0.04, Section 7.2.1\r
//\r
#define RETRY_CNT_MAX  3\r
\r
/**\r
  Check whether TPM PTP register exist.\r
\r
  @param[in] Reg  Pointer to PTP register.\r
\r
  @retval    TRUE    TPM PTP exists.\r
  @retval    FALSE   TPM PTP is not found.\r
**/\r
BOOLEAN\r
Tpm2IsPtpPresence (\r
  IN VOID  *Reg\r
  )\r
{\r
  UINT8  RegRead;\r
\r
  RegRead = MmioRead8 ((UINTN)Reg);\r
  if (RegRead == 0xFF) {\r
    //\r
    // No TPM chip\r
    //\r
    return FALSE;\r
  }\r
\r
  return TRUE;\r
}\r
\r
/**\r
  Check whether the value of a TPM chip register satisfies the input BIT setting.\r
\r
  @param[in]  Register     Address port of register to be checked.\r
  @param[in]  BitSet       Check these data bits are set.\r
  @param[in]  BitClear     Check these data bits are clear.\r
  @param[in]  TimeOut      The max wait time (unit MicroSecond) when checking register.\r
\r
  @retval     EFI_SUCCESS  The register satisfies the check bit.\r
  @retval     EFI_TIMEOUT  The register can't run into the expected status in time.\r
**/\r
EFI_STATUS\r
PtpCrbWaitRegisterBits (\r
  IN      UINT32  *Register,\r
  IN      UINT32  BitSet,\r
  IN      UINT32  BitClear,\r
  IN      UINT32  TimeOut\r
  )\r
{\r
  UINT32  RegRead;\r
  UINT32  WaitTime;\r
\r
  for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30) {\r
    RegRead = MmioRead32 ((UINTN)Register);\r
    if (((RegRead & BitSet) == BitSet) && ((RegRead & BitClear) == 0)) {\r
      return EFI_SUCCESS;\r
    }\r
\r
    MicroSecondDelay (30);\r
  }\r
\r
  return EFI_TIMEOUT;\r
}\r
\r
/**\r
  Get the control of TPM chip.\r
\r
  @param[in] CrbReg                Pointer to CRB register.\r
\r
  @retval    EFI_SUCCESS           Get the control of TPM chip.\r
  @retval    EFI_INVALID_PARAMETER CrbReg is NULL.\r
  @retval    EFI_NOT_FOUND         TPM chip doesn't exit.\r
  @retval    EFI_TIMEOUT           Can't get the TPM control in time.\r
**/\r
EFI_STATUS\r
PtpCrbRequestUseTpm (\r
  IN      PTP_CRB_REGISTERS_PTR  CrbReg\r
  )\r
{\r
  EFI_STATUS  Status;\r
\r
  if (!Tpm2IsPtpPresence (CrbReg)) {\r
    return EFI_NOT_FOUND;\r
  }\r
\r
  MmioWrite32 ((UINTN)&CrbReg->LocalityControl, PTP_CRB_LOCALITY_CONTROL_REQUEST_ACCESS);\r
  Status = PtpCrbWaitRegisterBits (\r
             &CrbReg->LocalityStatus,\r
             PTP_CRB_LOCALITY_STATUS_GRANTED,\r
             0,\r
             PTP_TIMEOUT_A\r
             );\r
  return Status;\r
}\r
\r
/**\r
  Send a command to TPM for execution and return response data.\r
\r
  @param[in]      CrbReg        TPM register space base address.\r
  @param[in]      BufferIn      Buffer for command data.\r
  @param[in]      SizeIn        Size of command data.\r
  @param[in, out] BufferOut     Buffer for response data.\r
  @param[in, out] SizeOut       Size of response data.\r
\r
  @retval EFI_SUCCESS           Operation completed successfully.\r
  @retval EFI_BUFFER_TOO_SMALL  Response data buffer is too small.\r
  @retval EFI_DEVICE_ERROR      Unexpected device behavior.\r
  @retval EFI_UNSUPPORTED       Unsupported TPM version\r
\r
**/\r
EFI_STATUS\r
PtpCrbTpmCommand (\r
  IN     PTP_CRB_REGISTERS_PTR  CrbReg,\r
  IN     UINT8                  *BufferIn,\r
  IN     UINT32                 SizeIn,\r
  IN OUT UINT8                  *BufferOut,\r
  IN OUT UINT32                 *SizeOut\r
  )\r
{\r
  EFI_STATUS  Status;\r
  UINT32      Index;\r
  UINT32      TpmOutSize;\r
  UINT16      Data16;\r
  UINT32      Data32;\r
  UINT8       RetryCnt;\r
\r
  DEBUG_CODE_BEGIN ();\r
  UINTN  DebugSize;\r
\r
  DEBUG ((DEBUG_VERBOSE, "PtpCrbTpmCommand Send - "));\r
  if (SizeIn > 0x100) {\r
    DebugSize = 0x40;\r
  } else {\r
    DebugSize = SizeIn;\r
  }\r
\r
  for (Index = 0; Index < DebugSize; Index++) {\r
    DEBUG ((DEBUG_VERBOSE, "%02x ", BufferIn[Index]));\r
  }\r
\r
  if (DebugSize != SizeIn) {\r
    DEBUG ((DEBUG_VERBOSE, "...... "));\r
    for (Index = SizeIn - 0x20; Index < SizeIn; Index++) {\r
      DEBUG ((DEBUG_VERBOSE, "%02x ", BufferIn[Index]));\r
    }\r
  }\r
\r
  DEBUG ((DEBUG_VERBOSE, "\n"));\r
  DEBUG_CODE_END ();\r
  TpmOutSize = 0;\r
\r
  RetryCnt = 0;\r
  while (TRUE) {\r
    //\r
    // STEP 0:\r
    // if CapCRbIdelByPass == 0, enforce Idle state before sending command\r
    //\r
    if ((GetCachedIdleByPass () == 0) && ((MmioRead32 ((UINTN)&CrbReg->CrbControlStatus) & PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE) == 0)) {\r
      Status = PtpCrbWaitRegisterBits (\r
                 &CrbReg->CrbControlStatus,\r
                 PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,\r
                 0,\r
                 PTP_TIMEOUT_C\r
                 );\r
      if (EFI_ERROR (Status)) {\r
        RetryCnt++;\r
        if (RetryCnt < RETRY_CNT_MAX) {\r
          MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);\r
          continue;\r
        } else {\r
          //\r
          // Try to goIdle to recover TPM\r
          //\r
          Status = EFI_DEVICE_ERROR;\r
          goto GoIdle_Exit;\r
        }\r
      }\r
    }\r
\r
    //\r
    // STEP 1:\r
    // Ready is any time the TPM is ready to receive a command, following a write\r
    // of 1 by software to Request.cmdReady, as indicated by the Status field\r
    // being cleared to 0.\r
    //\r
    MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY);\r
    Status = PtpCrbWaitRegisterBits (\r
               &CrbReg->CrbControlRequest,\r
               0,\r
               PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY,\r
               PTP_TIMEOUT_C\r
               );\r
    if (EFI_ERROR (Status)) {\r
      RetryCnt++;\r
      if (RetryCnt < RETRY_CNT_MAX) {\r
        MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);\r
        continue;\r
      } else {\r
        Status = EFI_DEVICE_ERROR;\r
        goto GoIdle_Exit;\r
      }\r
    }\r
\r
    Status = PtpCrbWaitRegisterBits (\r
               &CrbReg->CrbControlStatus,\r
               0,\r
               PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,\r
               PTP_TIMEOUT_C\r
               );\r
    if (EFI_ERROR (Status)) {\r
      RetryCnt++;\r
      if (RetryCnt < RETRY_CNT_MAX) {\r
        MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);\r
        continue;\r
      } else {\r
        Status = EFI_DEVICE_ERROR;\r
        goto GoIdle_Exit;\r
      }\r
    }\r
\r
    break;\r
  }\r
\r
  //\r
  // STEP 2:\r
  // Command Reception occurs following a Ready state between the write of the\r
  // first byte of a command to the Command Buffer and the receipt of a write\r
  // of 1 to Start.\r
  //\r
  for (Index = 0; Index < SizeIn; Index++) {\r
    MmioWrite8 ((UINTN)&CrbReg->CrbDataBuffer[Index], BufferIn[Index]);\r
  }\r
\r
  MmioWrite32 ((UINTN)&CrbReg->CrbControlCommandAddressHigh, (UINT32)RShiftU64 ((UINTN)CrbReg->CrbDataBuffer, 32));\r
  MmioWrite32 ((UINTN)&CrbReg->CrbControlCommandAddressLow, (UINT32)(UINTN)CrbReg->CrbDataBuffer);\r
  MmioWrite32 ((UINTN)&CrbReg->CrbControlCommandSize, sizeof (CrbReg->CrbDataBuffer));\r
\r
  MmioWrite64 ((UINTN)&CrbReg->CrbControlResponseAddrss, (UINT32)(UINTN)CrbReg->CrbDataBuffer);\r
  MmioWrite32 ((UINTN)&CrbReg->CrbControlResponseSize, sizeof (CrbReg->CrbDataBuffer));\r
\r
  //\r
  // STEP 3:\r
  // Command Execution occurs after receipt of a 1 to Start and the TPM\r
  // clearing Start to 0.\r
  //\r
  MmioWrite32 ((UINTN)&CrbReg->CrbControlStart, PTP_CRB_CONTROL_START);\r
  Status = PtpCrbWaitRegisterBits (\r
             &CrbReg->CrbControlStart,\r
             0,\r
             PTP_CRB_CONTROL_START,\r
             PTP_TIMEOUT_MAX\r
             );\r
  if (EFI_ERROR (Status)) {\r
    //\r
    // Command Completion check timeout. Cancel the currently executing command by writing TPM_CRB_CTRL_CANCEL,\r
    // Expect TPM_RC_CANCELLED or successfully completed response.\r
    //\r
    MmioWrite32 ((UINTN)&CrbReg->CrbControlCancel, PTP_CRB_CONTROL_CANCEL);\r
    Status = PtpCrbWaitRegisterBits (\r
               &CrbReg->CrbControlStart,\r
               0,\r
               PTP_CRB_CONTROL_START,\r
               PTP_TIMEOUT_B\r
               );\r
    MmioWrite32 ((UINTN)&CrbReg->CrbControlCancel, 0);\r
\r
    if (EFI_ERROR (Status)) {\r
      //\r
      // Still in Command Execution state. Try to goIdle, the behavior is agnostic.\r
      //\r
      Status = EFI_DEVICE_ERROR;\r
      goto GoIdle_Exit;\r
    }\r
  }\r
\r
  //\r
  // STEP 4:\r
  // Command Completion occurs after completion of a command (indicated by the\r
  // TPM clearing TPM_CRB_CTRL_Start_x to 0) and before a write of a 1 by the\r
  // software to Request.goIdle.\r
  //\r
\r
  //\r
  // Get response data header\r
  //\r
  for (Index = 0; Index < sizeof (TPM2_RESPONSE_HEADER); Index++) {\r
    BufferOut[Index] = MmioRead8 ((UINTN)&CrbReg->CrbDataBuffer[Index]);\r
  }\r
\r
  DEBUG_CODE_BEGIN ();\r
  DEBUG ((DEBUG_VERBOSE, "PtpCrbTpmCommand ReceiveHeader - "));\r
  for (Index = 0; Index < sizeof (TPM2_RESPONSE_HEADER); Index++) {\r
    DEBUG ((DEBUG_VERBOSE, "%02x ", BufferOut[Index]));\r
  }\r
\r
  DEBUG ((DEBUG_VERBOSE, "\n"));\r
  DEBUG_CODE_END ();\r
  //\r
  // Check the response data header (tag, parasize and returncode)\r
  //\r
  CopyMem (&Data16, BufferOut, sizeof (UINT16));\r
  // TPM2 should not use this RSP_COMMAND\r
  if (SwapBytes16 (Data16) == TPM_ST_RSP_COMMAND) {\r
    DEBUG ((DEBUG_ERROR, "TPM2: TPM_ST_RSP error - %x\n", TPM_ST_RSP_COMMAND));\r
    Status = EFI_UNSUPPORTED;\r
    goto GoIdle_Exit;\r
  }\r
\r
  CopyMem (&Data32, (BufferOut + 2), sizeof (UINT32));\r
  TpmOutSize = SwapBytes32 (Data32);\r
  if (*SizeOut < TpmOutSize) {\r
    //\r
    // Command completed, but buffer is not enough\r
    //\r
    Status = EFI_BUFFER_TOO_SMALL;\r
    goto GoIdle_Exit;\r
  }\r
\r
  *SizeOut = TpmOutSize;\r
  //\r
  // Continue reading the remaining data\r
  //\r
  for (Index = sizeof (TPM2_RESPONSE_HEADER); Index < TpmOutSize; Index++) {\r
    BufferOut[Index] = MmioRead8 ((UINTN)&CrbReg->CrbDataBuffer[Index]);\r
  }\r
\r
  DEBUG_CODE_BEGIN ();\r
  DEBUG ((DEBUG_VERBOSE, "PtpCrbTpmCommand Receive - "));\r
  for (Index = 0; Index < TpmOutSize; Index++) {\r
    DEBUG ((DEBUG_VERBOSE, "%02x ", BufferOut[Index]));\r
  }\r
\r
  DEBUG ((DEBUG_VERBOSE, "\n"));\r
  DEBUG_CODE_END ();\r
\r
  //\r
  // Do not wait for state transition for TIMEOUT_C\r
  // This function will try to wait 2 TIMEOUT_C at the beginning in next call.\r
  //\r
GoIdle_Exit:\r
\r
  //\r
  //  Return to Idle state by setting TPM_CRB_CTRL_STS_x.Status.goIdle to 1.\r
  //\r
  MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);\r
\r
  return Status;\r
}\r
\r
/**\r
  Send a command to TPM for execution and return response data.\r
\r
  @param[in]      TisReg        TPM register space base address.\r
  @param[in]      BufferIn      Buffer for command data.\r
  @param[in]      SizeIn        Size of command data.\r
  @param[in, out] BufferOut     Buffer for response data.\r
  @param[in, out] SizeOut       Size of response data.\r
\r
  @retval EFI_SUCCESS           Operation completed successfully.\r
  @retval EFI_BUFFER_TOO_SMALL  Response data buffer is too small.\r
  @retval EFI_DEVICE_ERROR      Unexpected device behavior.\r
  @retval EFI_UNSUPPORTED       Unsupported TPM version\r
\r
**/\r
EFI_STATUS\r
Tpm2TisTpmCommand (\r
  IN     TIS_PC_REGISTERS_PTR  TisReg,\r
  IN     UINT8                 *BufferIn,\r
  IN     UINT32                SizeIn,\r
  IN OUT UINT8                 *BufferOut,\r
  IN OUT UINT32                *SizeOut\r
  );\r
\r
/**\r
  Get the control of TPM chip by sending requestUse command TIS_PC_ACC_RQUUSE\r
  to ACCESS Register in the time of default TIS_TIMEOUT_A.\r
\r
  @param[in] TisReg                Pointer to TIS register.\r
\r
  @retval    EFI_SUCCESS           Get the control of TPM chip.\r
  @retval    EFI_INVALID_PARAMETER TisReg is NULL.\r
  @retval    EFI_NOT_FOUND         TPM chip doesn't exit.\r
  @retval    EFI_TIMEOUT           Can't get the TPM control in time.\r
**/\r
EFI_STATUS\r
TisPcRequestUseTpm (\r
  IN     TIS_PC_REGISTERS_PTR  TisReg\r
  );\r
\r
/**\r
  Return PTP interface type.\r
\r
  @param[in] Register                Pointer to PTP register.\r
\r
  @return PTP interface type.\r
**/\r
TPM2_PTP_INTERFACE_TYPE\r
Tpm2GetPtpInterface (\r
  IN VOID  *Register\r
  )\r
{\r
  PTP_CRB_INTERFACE_IDENTIFIER   InterfaceId;\r
  PTP_FIFO_INTERFACE_CAPABILITY  InterfaceCapability;\r
\r
  if (!Tpm2IsPtpPresence (Register)) {\r
    return Tpm2PtpInterfaceMax;\r
  }\r
\r
  //\r
  // Check interface id\r
  //\r
  InterfaceId.Uint32         = MmioRead32 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->InterfaceId);\r
  InterfaceCapability.Uint32 = MmioRead32 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->InterfaceCapability);\r
\r
  if ((InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_CRB) &&\r
      (InterfaceId.Bits.InterfaceVersion == PTP_INTERFACE_IDENTIFIER_INTERFACE_VERSION_CRB) &&\r
      (InterfaceId.Bits.CapCRB != 0))\r
  {\r
    return Tpm2PtpInterfaceCrb;\r
  }\r
\r
  if ((InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_FIFO) &&\r
      (InterfaceId.Bits.InterfaceVersion == PTP_INTERFACE_IDENTIFIER_INTERFACE_VERSION_FIFO) &&\r
      (InterfaceId.Bits.CapFIFO != 0) &&\r
      (InterfaceCapability.Bits.InterfaceVersion == INTERFACE_CAPABILITY_INTERFACE_VERSION_PTP))\r
  {\r
    return Tpm2PtpInterfaceFifo;\r
  }\r
\r
  return Tpm2PtpInterfaceTis;\r
}\r
\r
/**\r
  Return PTP CRB interface IdleByPass state.\r
\r
  @param[in] Register                Pointer to PTP register.\r
\r
  @return PTP CRB interface IdleByPass state.\r
**/\r
UINT8\r
Tpm2GetIdleByPass (\r
  IN VOID  *Register\r
  )\r
{\r
  PTP_CRB_INTERFACE_IDENTIFIER  InterfaceId;\r
\r
  //\r
  // Check interface id\r
  //\r
  InterfaceId.Uint32 = MmioRead32 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->InterfaceId);\r
\r
  return (UINT8)(InterfaceId.Bits.CapCRBIdleBypass);\r
}\r
\r
/**\r
  Dump PTP register information.\r
\r
  @param[in] Register                Pointer to PTP register.\r
**/\r
VOID\r
DumpPtpInfo (\r
  IN VOID  *Register\r
  )\r
{\r
  PTP_CRB_INTERFACE_IDENTIFIER   InterfaceId;\r
  PTP_FIFO_INTERFACE_CAPABILITY  InterfaceCapability;\r
  UINT8                          StatusEx;\r
  UINT16                         Vid;\r
  UINT16                         Did;\r
  UINT8                          Rid;\r
  TPM2_PTP_INTERFACE_TYPE        PtpInterface;\r
\r
  if (!Tpm2IsPtpPresence (Register)) {\r
    return;\r
  }\r
\r
  InterfaceId.Uint32         = MmioRead32 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->InterfaceId);\r
  InterfaceCapability.Uint32 = MmioRead32 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->InterfaceCapability);\r
  StatusEx                   = MmioRead8 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->StatusEx);\r
\r
  //\r
  // Dump InterfaceId Register for PTP\r
  //\r
  DEBUG ((DEBUG_INFO, "InterfaceId - 0x%08x\n", InterfaceId.Uint32));\r
  DEBUG ((DEBUG_INFO, "  InterfaceType    - 0x%02x\n", InterfaceId.Bits.InterfaceType));\r
  if (InterfaceId.Bits.InterfaceType != PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_TIS) {\r
    DEBUG ((DEBUG_INFO, "  InterfaceVersion - 0x%02x\n", InterfaceId.Bits.InterfaceVersion));\r
    DEBUG ((DEBUG_INFO, "  CapFIFO          - 0x%x\n", InterfaceId.Bits.CapFIFO));\r
    DEBUG ((DEBUG_INFO, "  CapCRB           - 0x%x\n", InterfaceId.Bits.CapCRB));\r
  }\r
\r
  //\r
  // Dump Capability Register for TIS and FIFO\r
  //\r
  DEBUG ((DEBUG_INFO, "InterfaceCapability - 0x%08x\n", InterfaceCapability.Uint32));\r
  if ((InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_TIS) ||\r
      (InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_FIFO))\r
  {\r
    DEBUG ((DEBUG_INFO, "  InterfaceVersion - 0x%x\n", InterfaceCapability.Bits.InterfaceVersion));\r
  }\r
\r
  //\r
  // Dump StatusEx Register for PTP FIFO\r
  //\r
  DEBUG ((DEBUG_INFO, "StatusEx - 0x%02x\n", StatusEx));\r
  if (InterfaceCapability.Bits.InterfaceVersion == INTERFACE_CAPABILITY_INTERFACE_VERSION_PTP) {\r
    DEBUG ((DEBUG_INFO, "  TpmFamily - 0x%x\n", (StatusEx & PTP_FIFO_STS_EX_TPM_FAMILY) >> PTP_FIFO_STS_EX_TPM_FAMILY_OFFSET));\r
  }\r
\r
  Vid          = 0xFFFF;\r
  Did          = 0xFFFF;\r
  Rid          = 0xFF;\r
  PtpInterface = GetCachedPtpInterface ();\r
  DEBUG ((DEBUG_INFO, "PtpInterface - %x\n", PtpInterface));\r
  switch (PtpInterface) {\r
    case Tpm2PtpInterfaceCrb:\r
      Vid = MmioRead16 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->Vid);\r
      Did = MmioRead16 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->Did);\r
      Rid = (UINT8)InterfaceId.Bits.Rid;\r
      break;\r
    case Tpm2PtpInterfaceFifo:\r
    case Tpm2PtpInterfaceTis:\r
      Vid = MmioRead16 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->Vid);\r
      Did = MmioRead16 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->Did);\r
      Rid = MmioRead8 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->Rid);\r
      break;\r
    default:\r
      break;\r
  }\r
\r
  DEBUG ((DEBUG_INFO, "VID - 0x%04x\n", Vid));\r
  DEBUG ((DEBUG_INFO, "DID - 0x%04x\n", Did));\r
  DEBUG ((DEBUG_INFO, "RID - 0x%02x\n", Rid));\r
}\r
\r
/**\r
  This service enables the sending of commands to the TPM2.\r
\r
  @param[in]      InputParameterBlockSize  Size of the TPM2 input parameter block.\r
  @param[in]      InputParameterBlock      Pointer to the TPM2 input parameter block.\r
  @param[in,out]  OutputParameterBlockSize Size of the TPM2 output parameter block.\r
  @param[in]      OutputParameterBlock     Pointer to the TPM2 output parameter block.\r
\r
  @retval EFI_SUCCESS            The command byte stream was successfully sent to the device and a response was successfully received.\r
  @retval EFI_DEVICE_ERROR       The command was not successfully sent to the device or a response was not successfully received from the device.\r
  @retval EFI_BUFFER_TOO_SMALL   The output parameter block is too small.\r
**/\r
EFI_STATUS\r
EFIAPI\r
DTpm2SubmitCommand (\r
  IN UINT32      InputParameterBlockSize,\r
  IN UINT8       *InputParameterBlock,\r
  IN OUT UINT32  *OutputParameterBlockSize,\r
  IN UINT8       *OutputParameterBlock\r
  )\r
{\r
  TPM2_PTP_INTERFACE_TYPE  PtpInterface;\r
\r
  PtpInterface = GetCachedPtpInterface ();\r
  switch (PtpInterface) {\r
    case Tpm2PtpInterfaceCrb:\r
      return PtpCrbTpmCommand (\r
               (PTP_CRB_REGISTERS_PTR)(UINTN)PcdGet64 (PcdTpmBaseAddress),\r
               InputParameterBlock,\r
               InputParameterBlockSize,\r
               OutputParameterBlock,\r
               OutputParameterBlockSize\r
               );\r
    case Tpm2PtpInterfaceFifo:\r
    case Tpm2PtpInterfaceTis:\r
      return Tpm2TisTpmCommand (\r
               (TIS_PC_REGISTERS_PTR)(UINTN)PcdGet64 (PcdTpmBaseAddress),\r
               InputParameterBlock,\r
               InputParameterBlockSize,\r
               OutputParameterBlock,\r
               OutputParameterBlockSize\r
               );\r
    default:\r
      return EFI_NOT_FOUND;\r
  }\r
}\r
\r
/**\r
  This service requests use TPM2.\r
\r
  @retval EFI_SUCCESS      Get the control of TPM2 chip.\r
  @retval EFI_NOT_FOUND    TPM2 not found.\r
  @retval EFI_DEVICE_ERROR Unexpected device behavior.\r
**/\r
EFI_STATUS\r
EFIAPI\r
DTpm2RequestUseTpm (\r
  VOID\r
  )\r
{\r
  TPM2_PTP_INTERFACE_TYPE  PtpInterface;\r
\r
  PtpInterface = GetCachedPtpInterface ();\r
  switch (PtpInterface) {\r
    case Tpm2PtpInterfaceCrb:\r
      return PtpCrbRequestUseTpm ((PTP_CRB_REGISTERS_PTR)(UINTN)PcdGet64 (PcdTpmBaseAddress));\r
    case Tpm2PtpInterfaceFifo:\r
    case Tpm2PtpInterfaceTis:\r
      return TisPcRequestUseTpm ((TIS_PC_REGISTERS_PTR)(UINTN)PcdGet64 (PcdTpmBaseAddress));\r
    default:\r
      return EFI_NOT_FOUND;\r
  }\r
}\r