[mirror_edk2.git] / SecurityPkg / Library / Tpm2DeviceLibDTpm / Tpm2Tis.c

/** @file\r
  TIS (TPM Interface Specification) functions used by dTPM2.0 library.\r
  \r
Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>\r
(C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>\r
This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution.  The full text of the license may be found at \r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include <IndustryStandard/Tpm20.h>\r
\r
#include <Library/BaseLib.h>\r
#include <Library/BaseMemoryLib.h>\r
#include <Library/IoLib.h>\r
#include <Library/TimerLib.h>\r
#include <Library/DebugLib.h>\r
#include <Library/Tpm2DeviceLib.h>\r
#include <Library/PcdLib.h>\r
\r
#include <IndustryStandard/TpmTis.h>\r
\r
#define TIS_TIMEOUT_MAX             (90000 * 1000)  // 90s\r
\r
//\r
// Max TPM command/reponse length\r
//\r
#define TPMCMDBUFLENGTH             0x500\r
\r
/**\r
  Check whether TPM chip exist.\r
\r
  @param[in] TisReg  Pointer to TIS register.\r
\r
  @retval    TRUE    TPM chip exists.\r
  @retval    FALSE   TPM chip is not found.\r
**/\r
BOOLEAN\r
TisPcPresenceCheck (\r
  IN      TIS_PC_REGISTERS_PTR      TisReg\r
  )\r
{\r
  UINT8                             RegRead;\r
  \r
  RegRead = MmioRead8 ((UINTN)&TisReg->Access);\r
  return (BOOLEAN)(RegRead != (UINT8)-1);\r
}\r
\r
/**\r
  Check whether the value of a TPM chip register satisfies the input BIT setting.\r
\r
  @param[in]  Register     Address port of register to be checked.\r
  @param[in]  BitSet       Check these data bits are set.\r
  @param[in]  BitClear     Check these data bits are clear.\r
  @param[in]  TimeOut      The max wait time (unit MicroSecond) when checking register.\r
\r
  @retval     EFI_SUCCESS  The register satisfies the check bit.\r
  @retval     EFI_TIMEOUT  The register can't run into the expected status in time.\r
**/\r
EFI_STATUS\r
TisPcWaitRegisterBits (\r
  IN      UINT8                     *Register,\r
  IN      UINT8                     BitSet,\r
  IN      UINT8                     BitClear,\r
  IN      UINT32                    TimeOut\r
  )\r
{\r
  UINT8                             RegRead;\r
  UINT32                            WaitTime;\r
\r
  for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){\r
    RegRead = MmioRead8 ((UINTN)Register);\r
    if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0)\r
      return EFI_SUCCESS;\r
    MicroSecondDelay (30);\r
  }\r
  return EFI_TIMEOUT;\r
}\r
\r
/**\r
  Get BurstCount by reading the burstCount field of a TIS regiger \r
  in the time of default TIS_TIMEOUT_D.\r
\r
  @param[in]  TisReg                Pointer to TIS register.\r
  @param[out] BurstCount            Pointer to a buffer to store the got BurstConut.\r
\r
  @retval     EFI_SUCCESS           Get BurstCount.\r
  @retval     EFI_INVALID_PARAMETER TisReg is NULL or BurstCount is NULL.\r
  @retval     EFI_TIMEOUT           BurstCount can't be got in time.\r
**/\r
EFI_STATUS\r
TisPcReadBurstCount (\r
  IN      TIS_PC_REGISTERS_PTR      TisReg,\r
     OUT  UINT16                    *BurstCount\r
  )\r
{\r
  UINT32                            WaitTime;\r
  UINT8                             DataByte0;\r
  UINT8                             DataByte1;\r
\r
  if (BurstCount == NULL || TisReg == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  WaitTime = 0;\r
  do {\r
    //\r
    // TIS_PC_REGISTERS_PTR->burstCount is UINT16, but it is not 2bytes aligned,\r
    // so it needs to use MmioRead8 to read two times\r
    //\r
    DataByte0   = MmioRead8 ((UINTN)&TisReg->BurstCount);\r
    DataByte1   = MmioRead8 ((UINTN)&TisReg->BurstCount + 1);\r
    *BurstCount = (UINT16)((DataByte1 << 8) + DataByte0);\r
    if (*BurstCount != 0) {\r
      return EFI_SUCCESS;\r
    }\r
    MicroSecondDelay (30);\r
    WaitTime += 30;\r
  } while (WaitTime < TIS_TIMEOUT_D);\r
\r
  return EFI_TIMEOUT;\r
}\r
\r
/**\r
  Set TPM chip to ready state by sending ready command TIS_PC_STS_READY \r
  to Status Register in time.\r
\r
  @param[in] TisReg                Pointer to TIS register.\r
\r
  @retval    EFI_SUCCESS           TPM chip enters into ready state.\r
  @retval    EFI_INVALID_PARAMETER TisReg is NULL.\r
  @retval    EFI_TIMEOUT           TPM chip can't be set to ready state in time.\r
**/\r
EFI_STATUS\r
TisPcPrepareCommand (\r
  IN      TIS_PC_REGISTERS_PTR      TisReg\r
  )\r
{\r
  EFI_STATUS                        Status;\r
\r
  if (TisReg == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_READY);\r
  Status = TisPcWaitRegisterBits (\r
             &TisReg->Status,\r
             TIS_PC_STS_READY,\r
             0,\r
             TIS_TIMEOUT_B\r
             );\r
  return Status;\r
}\r
\r
/**\r
  Get the control of TPM chip by sending requestUse command TIS_PC_ACC_RQUUSE \r
  to ACCESS Register in the time of default TIS_TIMEOUT_A.\r
\r
  @param[in] TisReg                Pointer to TIS register.\r
\r
  @retval    EFI_SUCCESS           Get the control of TPM chip.\r
  @retval    EFI_INVALID_PARAMETER TisReg is NULL.\r
  @retval    EFI_NOT_FOUND         TPM chip doesn't exit.\r
  @retval    EFI_TIMEOUT           Can't get the TPM control in time.\r
**/\r
EFI_STATUS\r
TisPcRequestUseTpm (\r
  IN      TIS_PC_REGISTERS_PTR      TisReg\r
  )\r
{\r
  EFI_STATUS                        Status;\r
  \r
  if (TisReg == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  \r
  if (!TisPcPresenceCheck (TisReg)) {\r
    return EFI_NOT_FOUND;\r
  }\r
\r
  MmioWrite8((UINTN)&TisReg->Access, TIS_PC_ACC_RQUUSE);\r
  Status = TisPcWaitRegisterBits (\r
             &TisReg->Access,\r
             (UINT8)(TIS_PC_ACC_ACTIVE |TIS_PC_VALID),\r
             0,\r
             TIS_TIMEOUT_A\r
             );\r
  return Status;\r
}\r
\r
/**\r
  Send a command to TPM for execution and return response data.\r
\r
  @param[in]      TisReg        TPM register space base address.  \r
  @param[in]      BufferIn      Buffer for command data.  \r
  @param[in]      SizeIn        Size of command data.  \r
  @param[in, out] BufferOut     Buffer for response data.  \r
  @param[in, out] SizeOut       Size of response data.  \r
 \r
  @retval EFI_SUCCESS           Operation completed successfully.\r
  @retval EFI_BUFFER_TOO_SMALL  Response data buffer is too small.\r
  @retval EFI_DEVICE_ERROR      Unexpected device behavior.\r
  @retval EFI_UNSUPPORTED       Unsupported TPM version\r
\r
**/\r
EFI_STATUS\r
Tpm2TisTpmCommand (\r
  IN     TIS_PC_REGISTERS_PTR       TisReg,\r
  IN     UINT8                      *BufferIn,\r
  IN     UINT32                     SizeIn,\r
  IN OUT UINT8                      *BufferOut,\r
  IN OUT UINT32                     *SizeOut\r
  )\r
{\r
  EFI_STATUS                        Status;\r
  UINT16                            BurstCount;\r
  UINT32                            Index;\r
  UINT32                            TpmOutSize;\r
  UINT16                            Data16;\r
  UINT32                            Data32;\r
\r
  DEBUG_CODE (\r
    UINTN  DebugSize;\r
\r
    DEBUG ((EFI_D_VERBOSE, "Tpm2TisTpmCommand Send - "));\r
    if (SizeIn > 0x100) {\r
      DebugSize = 0x40;\r
    } else {\r
      DebugSize = SizeIn;\r
    }\r
    for (Index = 0; Index < DebugSize; Index++) {\r
      DEBUG ((EFI_D_VERBOSE, "%02x ", BufferIn[Index]));\r
    }\r
    if (DebugSize != SizeIn) {\r
      DEBUG ((EFI_D_VERBOSE, "...... "));\r
      for (Index = SizeIn - 0x20; Index < SizeIn; Index++) {\r
        DEBUG ((EFI_D_VERBOSE, "%02x ", BufferIn[Index]));\r
      }\r
    }\r
    DEBUG ((EFI_D_VERBOSE, "\n"));\r
  );\r
  TpmOutSize = 0;\r
\r
  Status = TisPcPrepareCommand (TisReg);\r
  if (EFI_ERROR (Status)){\r
    DEBUG ((DEBUG_ERROR, "Tpm2 is not ready for command!\n"));\r
    return EFI_DEVICE_ERROR;\r
  }\r
  //\r
  // Send the command data to Tpm\r
  //\r
  Index = 0;\r
  while (Index < SizeIn) {\r
    Status = TisPcReadBurstCount (TisReg, &BurstCount);\r
    if (EFI_ERROR (Status)) {\r
      Status = EFI_DEVICE_ERROR;\r
      goto Exit;\r
    }\r
    for (; BurstCount > 0 && Index < SizeIn; BurstCount--) {\r
      MmioWrite8((UINTN)&TisReg->DataFifo, *(BufferIn + Index));\r
      Index++;\r
    }\r
  }\r
  //\r
  // Check the Tpm status STS_EXPECT change from 1 to 0\r
  //\r
  Status = TisPcWaitRegisterBits (\r
             &TisReg->Status,\r
             (UINT8) TIS_PC_VALID,\r
             TIS_PC_STS_EXPECT,\r
             TIS_TIMEOUT_C\r
             );\r
  if (EFI_ERROR (Status)) {\r
    DEBUG ((DEBUG_ERROR, "Tpm2 The send buffer too small!\n"));\r
    Status = EFI_BUFFER_TOO_SMALL;\r
    goto Exit;\r
  }\r
  //\r
  // Executed the TPM command and waiting for the response data ready\r
  //\r
  MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_GO);\r
\r
  //\r
  // NOTE: That may take many seconds to minutes for certain commands, such as key generation.\r
  //\r
  Status = TisPcWaitRegisterBits (\r
             &TisReg->Status,\r
             (UINT8) (TIS_PC_VALID | TIS_PC_STS_DATA),\r
             0,\r
             TIS_TIMEOUT_MAX\r
             );\r
  if (EFI_ERROR (Status)) {\r
    DEBUG ((DEBUG_ERROR, "Wait for Tpm2 response data time out!!\n"));\r
    Status = EFI_DEVICE_ERROR;\r
    goto Exit;\r
  }\r
  //\r
  // Get response data header\r
  //\r
  Index = 0;\r
  BurstCount = 0;\r
  while (Index < sizeof (TPM2_RESPONSE_HEADER)) {\r
    Status = TisPcReadBurstCount (TisReg, &BurstCount);\r
    if (EFI_ERROR (Status)) {\r
      Status = EFI_DEVICE_ERROR;\r
      goto Exit;\r
    }\r
    for (; BurstCount > 0; BurstCount--) {\r
      *(BufferOut + Index) = MmioRead8 ((UINTN)&TisReg->DataFifo);\r
      Index++;\r
      if (Index == sizeof (TPM2_RESPONSE_HEADER)) break;\r
    }\r
  }\r
  DEBUG_CODE (\r
    DEBUG ((EFI_D_VERBOSE, "Tpm2TisTpmCommand ReceiveHeader - "));\r
    for (Index = 0; Index < sizeof (TPM2_RESPONSE_HEADER); Index++) {\r
      DEBUG ((EFI_D_VERBOSE, "%02x ", BufferOut[Index]));\r
    }\r
    DEBUG ((EFI_D_VERBOSE, "\n"));\r
  );\r
  //\r
  // Check the reponse data header (tag,parasize and returncode )\r
  //\r
  CopyMem (&Data16, BufferOut, sizeof (UINT16));\r
  // TPM2 should not use this RSP_COMMAND\r
  if (SwapBytes16 (Data16) == TPM_ST_RSP_COMMAND) {\r
    DEBUG ((EFI_D_ERROR, "TPM2: TPM_ST_RSP error - %x\n", TPM_ST_RSP_COMMAND));\r
    Status = EFI_UNSUPPORTED;\r
    goto Exit;\r
  }\r
\r
  CopyMem (&Data32, (BufferOut + 2), sizeof (UINT32));\r
  TpmOutSize  = SwapBytes32 (Data32);\r
  if (*SizeOut < TpmOutSize) {\r
    Status = EFI_BUFFER_TOO_SMALL;\r
    goto Exit;\r
  }\r
  *SizeOut = TpmOutSize;\r
  //\r
  // Continue reading the remaining data\r
  //\r
  while ( Index < TpmOutSize ) {\r
    for (; BurstCount > 0; BurstCount--) {\r
      *(BufferOut + Index) = MmioRead8 ((UINTN)&TisReg->DataFifo);\r
      Index++;\r
      if (Index == TpmOutSize) {\r
        Status = EFI_SUCCESS;\r
        goto Exit;\r
      }\r
    }\r
    Status = TisPcReadBurstCount (TisReg, &BurstCount);\r
    if (EFI_ERROR (Status)) {\r
      Status = EFI_DEVICE_ERROR;\r
      goto Exit;\r
    }\r
  }\r
Exit:\r
  DEBUG_CODE (\r
    DEBUG ((EFI_D_VERBOSE, "Tpm2TisTpmCommand Receive - "));\r
    for (Index = 0; Index < TpmOutSize; Index++) {\r
      DEBUG ((EFI_D_VERBOSE, "%02x ", BufferOut[Index]));\r
    }\r
    DEBUG ((EFI_D_VERBOSE, "\n"));\r
  );\r
  MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_READY);\r
  return Status;\r
}\r
\r
/**\r
  This service enables the sending of commands to the TPM2.\r
\r
  @param[in]      InputParameterBlockSize  Size of the TPM2 input parameter block.\r
  @param[in]      InputParameterBlock      Pointer to the TPM2 input parameter block.\r
  @param[in,out]  OutputParameterBlockSize Size of the TPM2 output parameter block.\r
  @param[in]      OutputParameterBlock     Pointer to the TPM2 output parameter block.\r
\r
  @retval EFI_SUCCESS            The command byte stream was successfully sent to the device and a response was successfully received.\r
  @retval EFI_DEVICE_ERROR       The command was not successfully sent to the device or a response was not successfully received from the device.\r
  @retval EFI_BUFFER_TOO_SMALL   The output parameter block is too small. \r
**/\r
EFI_STATUS\r
EFIAPI\r
DTpm2TisSubmitCommand (\r
  IN UINT32            InputParameterBlockSize,\r
  IN UINT8             *InputParameterBlock,\r
  IN OUT UINT32        *OutputParameterBlockSize,\r
  IN UINT8             *OutputParameterBlock\r
  )\r
{\r
  return Tpm2TisTpmCommand (\r
           (TIS_PC_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress),\r
           InputParameterBlock,\r
           InputParameterBlockSize,\r
           OutputParameterBlock,\r
           OutputParameterBlockSize\r
           );\r
}\r
\r
/**\r
  This service requests use TPM2.\r
\r
  @retval EFI_SUCCESS      Get the control of TPM2 chip.\r
  @retval EFI_NOT_FOUND    TPM2 not found.\r
  @retval EFI_DEVICE_ERROR Unexpected device behavior.\r
**/\r
EFI_STATUS\r
EFIAPI\r
DTpm2TisRequestUseTpm (\r
  VOID\r
  )\r
{\r
  return TisPcRequestUseTpm ((TIS_PC_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress));\r
}\r
Commit	Line	Data
c1d93242 JY	1	/** @file\r
	2	TIS (TPM Interface Specification) functions used by dTPM2.0 library.\r
	3	\r
79e748cf	4	Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>\r
6aaac383	5	(C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>\r
c1d93242 JY	6	This program and the accompanying materials \r
	7	are licensed and made available under the terms and conditions of the BSD License \r
	8	which accompanies this distribution. The full text of the license may be found at \r
	9	http://opensource.org/licenses/bsd-license.php\r
	10	\r
	11	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
	12	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	13	\r
	14	**/\r
	15	\r
	16	#include <IndustryStandard/Tpm20.h>\r
	17	\r
	18	#include <Library/BaseLib.h>\r
	19	#include <Library/BaseMemoryLib.h>\r
	20	#include <Library/IoLib.h>\r
	21	#include <Library/TimerLib.h>\r
	22	#include <Library/DebugLib.h>\r
	23	#include <Library/Tpm2DeviceLib.h>\r
	24	#include <Library/PcdLib.h>\r
	25	\r
79e748cf	26	#include <IndustryStandard/TpmTis.h>\r
c1d93242 JY	27	\r
	28	#define TIS_TIMEOUT_MAX (90000 * 1000) // 90s\r
	29	\r
	30	//\r
	31	// Max TPM command/reponse length\r
	32	//\r
	33	#define TPMCMDBUFLENGTH 0x500\r
	34	\r
	35	/**\r
	36	Check whether TPM chip exist.\r
	37	\r
	38	@param[in] TisReg Pointer to TIS register.\r
	39	\r
	40	@retval TRUE TPM chip exists.\r
	41	@retval FALSE TPM chip is not found.\r
	42	**/\r
	43	BOOLEAN\r
	44	TisPcPresenceCheck (\r
	45	IN TIS_PC_REGISTERS_PTR TisReg\r
	46	)\r
	47	{\r
	48	UINT8 RegRead;\r
	49	\r
	50	RegRead = MmioRead8 ((UINTN)&TisReg->Access);\r
	51	return (BOOLEAN)(RegRead != (UINT8)-1);\r
	52	}\r
	53	\r
	54	/**\r
	55	Check whether the value of a TPM chip register satisfies the input BIT setting.\r
	56	\r
	57	@param[in] Register Address port of register to be checked.\r
	58	@param[in] BitSet Check these data bits are set.\r
	59	@param[in] BitClear Check these data bits are clear.\r
	60	@param[in] TimeOut The max wait time (unit MicroSecond) when checking register.\r
	61	\r
	62	@retval EFI_SUCCESS The register satisfies the check bit.\r
	63	@retval EFI_TIMEOUT The register can't run into the expected status in time.\r
	64	**/\r
	65	EFI_STATUS\r
c1d93242 JY	66	TisPcWaitRegisterBits (\r
	67	IN UINT8 *Register,\r
	68	IN UINT8 BitSet,\r
	69	IN UINT8 BitClear,\r
	70	IN UINT32 TimeOut\r
	71	)\r
	72	{\r
	73	UINT8 RegRead;\r
	74	UINT32 WaitTime;\r
	75	\r
	76	for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){\r
	77	RegRead = MmioRead8 ((UINTN)Register);\r
	78	if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0)\r
	79	return EFI_SUCCESS;\r
	80	MicroSecondDelay (30);\r
	81	}\r
	82	return EFI_TIMEOUT;\r
	83	}\r
	84	\r
	85	/**\r
	86	Get BurstCount by reading the burstCount field of a TIS regiger \r
	87	in the time of default TIS_TIMEOUT_D.\r
	88	\r
	89	@param[in] TisReg Pointer to TIS register.\r
	90	@param[out] BurstCount Pointer to a buffer to store the got BurstConut.\r
	91	\r
	92	@retval EFI_SUCCESS Get BurstCount.\r
	93	@retval EFI_INVALID_PARAMETER TisReg is NULL or BurstCount is NULL.\r
	94	@retval EFI_TIMEOUT BurstCount can't be got in time.\r
	95	**/\r
	96	EFI_STATUS\r
c1d93242 JY	97	TisPcReadBurstCount (\r
	98	IN TIS_PC_REGISTERS_PTR TisReg,\r
	99	OUT UINT16 *BurstCount\r
	100	)\r
	101	{\r
	102	UINT32 WaitTime;\r
	103	UINT8 DataByte0;\r
	104	UINT8 DataByte1;\r
	105	\r
	106	if (BurstCount == NULL \|\| TisReg == NULL) {\r
	107	return EFI_INVALID_PARAMETER;\r
	108	}\r
	109	\r
	110	WaitTime = 0;\r
	111	do {\r
	112	//\r
	113	// TIS_PC_REGISTERS_PTR->burstCount is UINT16, but it is not 2bytes aligned,\r
	114	// so it needs to use MmioRead8 to read two times\r
	115	//\r
	116	DataByte0 = MmioRead8 ((UINTN)&TisReg->BurstCount);\r
	117	DataByte1 = MmioRead8 ((UINTN)&TisReg->BurstCount + 1);\r
	118	*BurstCount = (UINT16)((DataByte1 << 8) + DataByte0);\r
	119	if (*BurstCount != 0) {\r
	120	return EFI_SUCCESS;\r
	121	}\r
	122	MicroSecondDelay (30);\r
	123	WaitTime += 30;\r
	124	} while (WaitTime < TIS_TIMEOUT_D);\r
	125	\r
	126	return EFI_TIMEOUT;\r
	127	}\r
	128	\r
	129	/**\r
	130	Set TPM chip to ready state by sending ready command TIS_PC_STS_READY \r
	131	to Status Register in time.\r
	132	\r
	133	@param[in] TisReg Pointer to TIS register.\r
	134	\r
	135	@retval EFI_SUCCESS TPM chip enters into ready state.\r
	136	@retval EFI_INVALID_PARAMETER TisReg is NULL.\r
	137	@retval EFI_TIMEOUT TPM chip can't be set to ready state in time.\r
	138	**/\r
	139	EFI_STATUS\r
c1d93242 JY	140	TisPcPrepareCommand (\r
	141	IN TIS_PC_REGISTERS_PTR TisReg\r
	142	)\r
	143	{\r
	144	EFI_STATUS Status;\r
	145	\r
	146	if (TisReg == NULL) {\r
	147	return EFI_INVALID_PARAMETER;\r
	148	}\r
	149	\r
	150	MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_READY);\r
	151	Status = TisPcWaitRegisterBits (\r
	152	&TisReg->Status,\r
	153	TIS_PC_STS_READY,\r
	154	0,\r
	155	TIS_TIMEOUT_B\r
	156	);\r
	157	return Status;\r
	158	}\r
	159	\r
	160	/**\r
	161	Get the control of TPM chip by sending requestUse command TIS_PC_ACC_RQUUSE \r
	162	to ACCESS Register in the time of default TIS_TIMEOUT_A.\r
	163	\r
	164	@param[in] TisReg Pointer to TIS register.\r
	165	\r
	166	@retval EFI_SUCCESS Get the control of TPM chip.\r
	167	@retval EFI_INVALID_PARAMETER TisReg is NULL.\r
	168	@retval EFI_NOT_FOUND TPM chip doesn't exit.\r
	169	@retval EFI_TIMEOUT Can't get the TPM control in time.\r
	170	**/\r
	171	EFI_STATUS\r
c1d93242 JY	172	TisPcRequestUseTpm (\r
	173	IN TIS_PC_REGISTERS_PTR TisReg\r
	174	)\r
	175	{\r
	176	EFI_STATUS Status;\r
	177	\r
	178	if (TisReg == NULL) {\r
	179	return EFI_INVALID_PARAMETER;\r
	180	}\r
	181	\r
	182	if (!TisPcPresenceCheck (TisReg)) {\r
	183	return EFI_NOT_FOUND;\r
	184	}\r
	185	\r
	186	MmioWrite8((UINTN)&TisReg->Access, TIS_PC_ACC_RQUUSE);\r
	187	Status = TisPcWaitRegisterBits (\r
	188	&TisReg->Access,\r
	189	(UINT8)(TIS_PC_ACC_ACTIVE \|TIS_PC_VALID),\r
	190	0,\r
	191	TIS_TIMEOUT_A\r
	192	);\r
	193	return Status;\r
	194	}\r
	195	\r
	196	/**\r
	197	Send a command to TPM for execution and return response data.\r
	198	\r
	199	@param[in] TisReg TPM register space base address. \r
	200	@param[in] BufferIn Buffer for command data. \r
	201	@param[in] SizeIn Size of command data. \r
	202	@param[in, out] BufferOut Buffer for response data. \r
	203	@param[in, out] SizeOut Size of response data. \r
	204	\r
	205	@retval EFI_SUCCESS Operation completed successfully.\r
c1d93242 JY	206	@retval EFI_BUFFER_TOO_SMALL Response data buffer is too small.\r
	207	@retval EFI_DEVICE_ERROR Unexpected device behavior.\r
	208	@retval EFI_UNSUPPORTED Unsupported TPM version\r
	209	\r
	210	**/\r
	211	EFI_STATUS\r
c2967d35	212	Tpm2TisTpmCommand (\r
c1d93242 JY	213	IN TIS_PC_REGISTERS_PTR TisReg,\r
	214	IN UINT8 *BufferIn,\r
	215	IN UINT32 SizeIn,\r
	216	IN OUT UINT8 *BufferOut,\r
	217	IN OUT UINT32 *SizeOut\r
	218	)\r
	219	{\r
	220	EFI_STATUS Status;\r
	221	UINT16 BurstCount;\r
	222	UINT32 Index;\r
	223	UINT32 TpmOutSize;\r
	224	UINT16 Data16;\r
	225	UINT32 Data32;\r
	226	\r
	227	DEBUG_CODE (\r
	228	UINTN DebugSize;\r
	229	\r
6aaac383	230	DEBUG ((EFI_D_VERBOSE, "Tpm2TisTpmCommand Send - "));\r
c1d93242 JY	231	if (SizeIn > 0x100) {\r
	232	DebugSize = 0x40;\r
	233	} else {\r
	234	DebugSize = SizeIn;\r
	235	}\r
	236	for (Index = 0; Index < DebugSize; Index++) {\r
6aaac383	237	DEBUG ((EFI_D_VERBOSE, "%02x ", BufferIn[Index]));\r
c1d93242 JY	238	}\r
c1d93242 JY	239	if (DebugSize != SizeIn) {\r
6aaac383	240	DEBUG ((EFI_D_VERBOSE, "...... "));\r
c1d93242	241	for (Index = SizeIn - 0x20; Index < SizeIn; Index++) {\r
6aaac383	242	DEBUG ((EFI_D_VERBOSE, "%02x ", BufferIn[Index]));\r
c1d93242 JY	243	}\r
c1d93242 JY	244	}\r
6aaac383	245	DEBUG ((EFI_D_VERBOSE, "\n"));\r
c1d93242 JY	246	);\r
	247	TpmOutSize = 0;\r
	248	\r
	249	Status = TisPcPrepareCommand (TisReg);\r
	250	if (EFI_ERROR (Status)){\r
6f785cfc JY	251	DEBUG ((DEBUG_ERROR, "Tpm2 is not ready for command!\n"));\r
6f785cfc JY	252	return EFI_DEVICE_ERROR;\r
c1d93242 JY	253	}\r
	254	//\r
	255	// Send the command data to Tpm\r
	256	//\r
	257	Index = 0;\r
	258	while (Index < SizeIn) {\r
	259	Status = TisPcReadBurstCount (TisReg, &BurstCount);\r
	260	if (EFI_ERROR (Status)) {\r
6f785cfc	261	Status = EFI_DEVICE_ERROR;\r
c1d93242 JY	262	goto Exit;\r
	263	}\r
	264	for (; BurstCount > 0 && Index < SizeIn; BurstCount--) {\r
	265	MmioWrite8((UINTN)&TisReg->DataFifo, *(BufferIn + Index));\r
	266	Index++;\r
	267	}\r
	268	}\r
	269	//\r
	270	// Check the Tpm status STS_EXPECT change from 1 to 0\r
	271	//\r
	272	Status = TisPcWaitRegisterBits (\r
	273	&TisReg->Status,\r
	274	(UINT8) TIS_PC_VALID,\r
	275	TIS_PC_STS_EXPECT,\r
	276	TIS_TIMEOUT_C\r
	277	);\r
	278	if (EFI_ERROR (Status)) {\r
6f785cfc	279	DEBUG ((DEBUG_ERROR, "Tpm2 The send buffer too small!\n"));\r
c1d93242 JY	280	Status = EFI_BUFFER_TOO_SMALL;\r
	281	goto Exit;\r
	282	}\r
	283	//\r
	284	// Executed the TPM command and waiting for the response data ready\r
	285	//\r
	286	MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_GO);\r
	287	\r
	288	//\r
	289	// NOTE: That may take many seconds to minutes for certain commands, such as key generation.\r
	290	//\r
	291	Status = TisPcWaitRegisterBits (\r
	292	&TisReg->Status,\r
	293	(UINT8) (TIS_PC_VALID \| TIS_PC_STS_DATA),\r
	294	0,\r
	295	TIS_TIMEOUT_MAX\r
	296	);\r
	297	if (EFI_ERROR (Status)) {\r
6f785cfc JY	298	DEBUG ((DEBUG_ERROR, "Wait for Tpm2 response data time out!!\n"));\r
6f785cfc JY	299	Status = EFI_DEVICE_ERROR;\r
c1d93242 JY	300	goto Exit;\r
	301	}\r
	302	//\r
	303	// Get response data header\r
	304	//\r
	305	Index = 0;\r
	306	BurstCount = 0;\r
	307	while (Index < sizeof (TPM2_RESPONSE_HEADER)) {\r
	308	Status = TisPcReadBurstCount (TisReg, &BurstCount);\r
	309	if (EFI_ERROR (Status)) {\r
6f785cfc	310	Status = EFI_DEVICE_ERROR;\r
c1d93242 JY	311	goto Exit;\r
	312	}\r
	313	for (; BurstCount > 0; BurstCount--) {\r
	314	*(BufferOut + Index) = MmioRead8 ((UINTN)&TisReg->DataFifo);\r
	315	Index++;\r
	316	if (Index == sizeof (TPM2_RESPONSE_HEADER)) break;\r
	317	}\r
	318	}\r
	319	DEBUG_CODE (\r
c2967d35	320	DEBUG ((EFI_D_VERBOSE, "Tpm2TisTpmCommand ReceiveHeader - "));\r
c1d93242	321	for (Index = 0; Index < sizeof (TPM2_RESPONSE_HEADER); Index++) {\r
6aaac383	322	DEBUG ((EFI_D_VERBOSE, "%02x ", BufferOut[Index]));\r
c1d93242	323	}\r
6aaac383	324	DEBUG ((EFI_D_VERBOSE, "\n"));\r
c1d93242 JY	325	);\r
	326	//\r
	327	// Check the reponse data header (tag,parasize and returncode )\r
	328	//\r
	329	CopyMem (&Data16, BufferOut, sizeof (UINT16));\r
	330	// TPM2 should not use this RSP_COMMAND\r
	331	if (SwapBytes16 (Data16) == TPM_ST_RSP_COMMAND) {\r
6f785cfc	332	DEBUG ((EFI_D_ERROR, "TPM2: TPM_ST_RSP error - %x\n", TPM_ST_RSP_COMMAND));\r
c1d93242 JY	333	Status = EFI_UNSUPPORTED;\r
	334	goto Exit;\r
	335	}\r
	336	\r
	337	CopyMem (&Data32, (BufferOut + 2), sizeof (UINT32));\r
	338	TpmOutSize = SwapBytes32 (Data32);\r
	339	if (*SizeOut < TpmOutSize) {\r
	340	Status = EFI_BUFFER_TOO_SMALL;\r
	341	goto Exit;\r
	342	}\r
	343	*SizeOut = TpmOutSize;\r
	344	//\r
	345	// Continue reading the remaining data\r
	346	//\r
	347	while ( Index < TpmOutSize ) {\r
	348	for (; BurstCount > 0; BurstCount--) {\r
	349	*(BufferOut + Index) = MmioRead8 ((UINTN)&TisReg->DataFifo);\r
	350	Index++;\r
	351	if (Index == TpmOutSize) {\r
	352	Status = EFI_SUCCESS;\r
	353	goto Exit;\r
	354	}\r
	355	}\r
	356	Status = TisPcReadBurstCount (TisReg, &BurstCount);\r
	357	if (EFI_ERROR (Status)) {\r
6f785cfc	358	Status = EFI_DEVICE_ERROR;\r
c1d93242 JY	359	goto Exit;\r
	360	}\r
	361	}\r
	362	Exit:\r
	363	DEBUG_CODE (\r
6aaac383	364	DEBUG ((EFI_D_VERBOSE, "Tpm2TisTpmCommand Receive - "));\r
c1d93242	365	for (Index = 0; Index < TpmOutSize; Index++) {\r
6aaac383	366	DEBUG ((EFI_D_VERBOSE, "%02x ", BufferOut[Index]));\r
c1d93242	367	}\r
6aaac383	368	DEBUG ((EFI_D_VERBOSE, "\n"));\r
c1d93242 JY	369	);\r
	370	MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_READY);\r
	371	return Status;\r
	372	}\r
	373	\r
	374	/**\r
	375	This service enables the sending of commands to the TPM2.\r
	376	\r
	377	@param[in] InputParameterBlockSize Size of the TPM2 input parameter block.\r
	378	@param[in] InputParameterBlock Pointer to the TPM2 input parameter block.\r
	379	@param[in,out] OutputParameterBlockSize Size of the TPM2 output parameter block.\r
	380	@param[in] OutputParameterBlock Pointer to the TPM2 output parameter block.\r
	381	\r
	382	@retval EFI_SUCCESS The command byte stream was successfully sent to the device and a response was successfully received.\r
	383	@retval EFI_DEVICE_ERROR The command was not successfully sent to the device or a response was not successfully received from the device.\r
	384	@retval EFI_BUFFER_TOO_SMALL The output parameter block is too small. \r
	385	**/\r
	386	EFI_STATUS\r
	387	EFIAPI\r
79e748cf	388	DTpm2TisSubmitCommand (\r
c1d93242 JY	389	IN UINT32 InputParameterBlockSize,\r
	390	IN UINT8 *InputParameterBlock,\r
	391	IN OUT UINT32 *OutputParameterBlockSize,\r
	392	IN UINT8 *OutputParameterBlock\r
	393	)\r
	394	{\r
c2967d35	395	return Tpm2TisTpmCommand (\r
c1d93242 JY	396	(TIS_PC_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress),\r
	397	InputParameterBlock,\r
	398	InputParameterBlockSize,\r
	399	OutputParameterBlock,\r
	400	OutputParameterBlockSize\r
	401	);\r
	402	}\r
	403	\r
	404	/**\r
	405	This service requests use TPM2.\r
	406	\r
	407	@retval EFI_SUCCESS Get the control of TPM2 chip.\r
	408	@retval EFI_NOT_FOUND TPM2 not found.\r
	409	@retval EFI_DEVICE_ERROR Unexpected device behavior.\r
	410	**/\r
	411	EFI_STATUS\r
	412	EFIAPI\r
79e748cf	413	DTpm2TisRequestUseTpm (\r
c1d93242 JY	414	VOID\r
	415	)\r
	416	{\r
	417	return TisPcRequestUseTpm ((TIS_PC_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress));\r
	418	}\r