[mirror_edk2.git] / ShellPkg / DynamicCommand / DpDynamicCommand / DpUtilities.c

/** @file\r
  Utility functions used by the Dp application.\r
\r
  Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.\r
  (C) Copyright 2015-2016 Hewlett Packard Enterprise Development LP<BR>\r
  This program and the accompanying materials\r
  are licensed and made available under the terms and conditions of the BSD License\r
  which accompanies this distribution.  The full text of the license may be found at\r
  http://opensource.org/licenses/bsd-license.php\r
\r
  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
**/\r
\r
#include <Library/BaseLib.h>\r
#include <Library/BaseMemoryLib.h>\r
#include <Library/MemoryAllocationLib.h>\r
#include <Library/DebugLib.h>\r
#include <Library/UefiBootServicesTableLib.h>\r
#include <Library/PeCoffGetEntryPointLib.h>\r
#include <Library/PrintLib.h>\r
#include <Library/HiiLib.h>\r
#include <Library/PcdLib.h>\r
#include <Library/UefiLib.h>\r
#include <Library/DevicePathLib.h>\r
#include <Library/HandleParsingLib.h>\r
\r
#include <Pi/PiFirmwareFile.h>\r
#include <Library/DxeServicesLib.h>\r
\r
#include <Protocol/LoadedImage.h>\r
#include <Protocol/DriverBinding.h>\r
#include <Protocol/ComponentName2.h>\r
#include <Protocol/DevicePath.h>\r
\r
#include <Guid/Performance.h>\r
\r
#include "Dp.h"\r
#include "Literals.h"\r
#include "DpInternal.h"\r
\r
/** \r
  Calculate an event's duration in timer ticks.\r
  \r
  Given the count direction and the event's start and end timer values,\r
  calculate the duration of the event in timer ticks.  Information for\r
  the current measurement is pointed to by the parameter.\r
  \r
  If the measurement's start time is 1, it indicates that the developer\r
  is indicating that the measurement began at the release of reset.\r
  The start time is adjusted to the timer's starting count before performing\r
  the elapsed time calculation.\r
  \r
  The calculated duration, in ticks, is the absolute difference between\r
  the measurement's ending and starting counts.\r
  \r
  @param Measurement   Pointer to a MEASUREMENT_RECORD structure containing\r
                       data for the current measurement.\r
  \r
  @return              The 64-bit duration of the event.\r
**/\r
UINT64\r
GetDuration (\r
  IN OUT MEASUREMENT_RECORD   *Measurement\r
  )\r
{\r
  UINT64    Duration;\r
  BOOLEAN   Error;\r
\r
  if (Measurement->EndTimeStamp == 0) {\r
    return 0;\r
  }\r
\r
  Duration = Measurement->EndTimeStamp - Measurement->StartTimeStamp;\r
  Error = (BOOLEAN)(Duration > Measurement->EndTimeStamp);\r
\r
  if (Error) {\r
    DEBUG ((EFI_D_ERROR, ALit_TimerLibError));\r
    Duration = 0;\r
  }\r
  return Duration;\r
}\r
\r
/** \r
  Determine whether the Measurement record is for an EFI Phase.\r
  \r
  The Token and Module members of the measurement record are checked.\r
  Module must be empty and Token must be one of SEC, PEI, DXE, BDS, or SHELL.\r
  \r
  @param[in]  Measurement A pointer to the Measurement record to test.\r
  \r
  @retval     TRUE        The measurement record is for an EFI Phase.\r
  @retval     FALSE       The measurement record is NOT for an EFI Phase.\r
**/\r
BOOLEAN\r
IsPhase(\r
  IN MEASUREMENT_RECORD        *Measurement\r
  )\r
{\r
  BOOLEAN   RetVal;\r
\r
  RetVal = (BOOLEAN)(\r
            ((AsciiStrCmp (Measurement->Token, ALit_SEC) == 0)    ||\r
             (AsciiStrCmp (Measurement->Token, ALit_PEI) == 0)    ||\r
             (AsciiStrCmp (Measurement->Token, ALit_DXE) == 0)    ||\r
             (AsciiStrCmp (Measurement->Token, ALit_BDS) == 0))\r
            );\r
  return RetVal;\r
}\r
\r
/**\r
  Determine whether the Measurement record is for core code.\r
\r
  @param[in] Measurement  A pointer to the Measurement record to test.\r
\r
  @retval     TRUE        The measurement record is used for core.\r
  @retval     FALSE       The measurement record is NOT used for core.\r
\r
**/\r
BOOLEAN\r
IsCorePerf(\r
  IN MEASUREMENT_RECORD        *Measurement\r
  )\r
{\r
  BOOLEAN   RetVal;\r
\r
  RetVal = (BOOLEAN)(\r
            ((Measurement->Identifier == MODULE_START_ID)            ||\r
             (Measurement->Identifier == MODULE_END_ID)              ||\r
             (Measurement->Identifier == MODULE_LOADIMAGE_START_ID)  ||\r
             (Measurement->Identifier == MODULE_LOADIMAGE_END_ID)    ||\r
             (Measurement->Identifier == MODULE_DB_START_ID)         ||\r
             (Measurement->Identifier == MODULE_DB_END_ID)           ||\r
             (Measurement->Identifier == MODULE_DB_SUPPORT_START_ID) ||\r
             (Measurement->Identifier == MODULE_DB_SUPPORT_END_ID)   ||\r
             (Measurement->Identifier == MODULE_DB_STOP_START_ID)    ||\r
             (Measurement->Identifier == MODULE_DB_STOP_START_ID))\r
            );\r
  return RetVal;\r
}\r
\r
/** \r
  Get the file name portion of the Pdb File Name.\r
  \r
  The portion of the Pdb File Name between the last backslash and\r
  either a following period or the end of the string is converted\r
  to Unicode and copied into UnicodeBuffer.  The name is truncated,\r
  if necessary, to ensure that UnicodeBuffer is not overrun.\r
  \r
  @param[in]  PdbFileName     Pdb file name.\r
  @param[out] UnicodeBuffer   The resultant Unicode File Name.\r
  \r
**/\r
VOID\r
DpGetShortPdbFileName (\r
  IN  CHAR8     *PdbFileName,\r
  OUT CHAR16    *UnicodeBuffer\r
  )\r
{\r
  UINTN IndexA;     // Current work location within an ASCII string.\r
  UINTN IndexU;     // Current work location within a Unicode string.\r
  UINTN StartIndex;\r
  UINTN EndIndex;\r
\r
  ZeroMem (UnicodeBuffer, (DP_GAUGE_STRING_LENGTH + 1) * sizeof (CHAR16));\r
\r
  if (PdbFileName == NULL) {\r
    StrnCpyS (UnicodeBuffer, DP_GAUGE_STRING_LENGTH + 1, L" ", 1);\r
  } else {\r
    StartIndex = 0;\r
    for (EndIndex = 0; PdbFileName[EndIndex] != 0; EndIndex++)\r
      ;\r
    for (IndexA = 0; PdbFileName[IndexA] != 0; IndexA++) {\r
      if ((PdbFileName[IndexA] == '\\') || (PdbFileName[IndexA] == '/')) {\r
        StartIndex = IndexA + 1;\r
      }\r
\r
      if (PdbFileName[IndexA] == '.') {\r
        EndIndex = IndexA;\r
      }\r
    }\r
\r
    IndexU = 0;\r
    for (IndexA = StartIndex; IndexA < EndIndex; IndexA++) {\r
      UnicodeBuffer[IndexU] = (CHAR16) PdbFileName[IndexA];\r
      IndexU++;\r
      if (IndexU >= DP_GAUGE_STRING_LENGTH) {\r
        UnicodeBuffer[DP_GAUGE_STRING_LENGTH] = 0;\r
        break;\r
      }\r
    }\r
  }\r
}\r
\r
/** \r
  Get a human readable name for an image handle.\r
  The following methods will be tried orderly:\r
    1. Image PDB\r
    2. ComponentName2 protocol\r
    3. FFS UI section\r
    4. Image GUID\r
    5. Image DevicePath\r
    6. Unknown Driver Name\r
\r
  @param[in]    Handle\r
\r
  @post   The resulting Unicode name string is stored in the\r
          mGaugeString global array.\r
\r
**/\r
VOID\r
DpGetNameFromHandle (\r
  IN EFI_HANDLE   Handle\r
  )\r
{\r
  EFI_STATUS                   Status;\r
  EFI_LOADED_IMAGE_PROTOCOL    *Image;\r
  CHAR8                        *PdbFileName;\r
  EFI_DRIVER_BINDING_PROTOCOL  *DriverBinding;\r
  EFI_STRING                   StringPtr;\r
  EFI_DEVICE_PATH_PROTOCOL     *LoadedImageDevicePath;\r
  EFI_DEVICE_PATH_PROTOCOL     *DevicePath;\r
  EFI_GUID                     *NameGuid;\r
  CHAR16                       *NameString;\r
  UINTN                        StringSize;\r
  CHAR8                        *PlatformLanguage;\r
  CHAR8                        *BestLanguage;\r
  EFI_COMPONENT_NAME2_PROTOCOL *ComponentName2;\r
\r
  Image = NULL;\r
  LoadedImageDevicePath = NULL;\r
  DevicePath = NULL;\r
\r
  //\r
  // Method 1: Get the name string from image PDB\r
  //\r
  Status = gBS->HandleProtocol (\r
                  Handle,\r
                  &gEfiLoadedImageProtocolGuid,\r
                  (VOID **) &Image\r
                  );\r
\r
  if (EFI_ERROR (Status)) {\r
    Status = gBS->OpenProtocol (\r
                    Handle,\r
                    &gEfiDriverBindingProtocolGuid,\r
                    (VOID **) &DriverBinding,\r
                    NULL,\r
                    NULL,\r
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
                    );\r
    if (!EFI_ERROR (Status)) {\r
      Status = gBS->HandleProtocol (\r
                      DriverBinding->ImageHandle,\r
                      &gEfiLoadedImageProtocolGuid,\r
                      (VOID **) &Image\r
                      );\r
    }\r
  }\r
\r
  if (!EFI_ERROR (Status)) {\r
    PdbFileName = PeCoffLoaderGetPdbPointer (Image->ImageBase);\r
\r
    if (PdbFileName != NULL) {\r
      DpGetShortPdbFileName (PdbFileName, mGaugeString);\r
      return;\r
    }\r
  }\r
\r
  //\r
  // Method 2: Get the name string from ComponentName2 protocol\r
  //\r
  Status = gBS->HandleProtocol (\r
                  Handle,\r
                  &gEfiComponentName2ProtocolGuid,\r
                  (VOID **) &ComponentName2\r
                  );\r
  if (!EFI_ERROR (Status)) {\r
    //\r
    // Firstly use platform language setting, secondly use driver's first supported language.\r
    //\r
    GetVariable2 (L"PlatformLang", &gEfiGlobalVariableGuid, (VOID**)&PlatformLanguage, NULL);\r
    BestLanguage = GetBestLanguage(\r
                     ComponentName2->SupportedLanguages,\r
                     FALSE,\r
                     (PlatformLanguage != NULL) ? PlatformLanguage : "",\r
                     ComponentName2->SupportedLanguages,\r
                     NULL\r
                     );\r
    SHELL_FREE_NON_NULL (PlatformLanguage);\r
\r
    Status = ComponentName2->GetDriverName (\r
                               ComponentName2,\r
                               BestLanguage != NULL ? BestLanguage : "en-US",\r
                               &StringPtr\r
                               );\r
    if (!EFI_ERROR (Status)) {\r
      SHELL_FREE_NON_NULL (BestLanguage);\r
      StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, StringPtr, DP_GAUGE_STRING_LENGTH);\r
      mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;\r
      return;\r
    }\r
  }\r
\r
  Status = gBS->HandleProtocol (\r
                  Handle,\r
                  &gEfiLoadedImageDevicePathProtocolGuid,\r
                  (VOID **) &LoadedImageDevicePath\r
                  );\r
  if (!EFI_ERROR (Status) && (LoadedImageDevicePath != NULL)) {\r
    DevicePath = LoadedImageDevicePath;\r
  } else if (Image != NULL) {\r
    DevicePath = Image->FilePath;\r
  }\r
\r
  if (DevicePath != NULL) {\r
    //\r
    // Try to get image GUID from image DevicePath\r
    //\r
    NameGuid = NULL;\r
    while (!IsDevicePathEndType (DevicePath)) {\r
      NameGuid = EfiGetNameGuidFromFwVolDevicePathNode ((MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *) DevicePath);\r
      if (NameGuid != NULL) {\r
        break;\r
      }\r
      DevicePath = NextDevicePathNode (DevicePath);\r
    }\r
\r
    if (NameGuid != NULL) {\r
      //\r
      // Try to get the image's FFS UI section by image GUID\r
      //\r
      NameString = NULL;\r
      StringSize = 0;\r
      Status = GetSectionFromAnyFv (\r
                NameGuid,\r
                EFI_SECTION_USER_INTERFACE,\r
                0,\r
                (VOID **) &NameString,\r
                &StringSize\r
                );\r
\r
      if (!EFI_ERROR (Status)) {\r
        //\r
        // Method 3. Get the name string from FFS UI section\r
        //\r
        StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, NameString, DP_GAUGE_STRING_LENGTH);\r
        mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;\r
        FreePool (NameString);\r
      } else {\r
        //\r
        // Method 4: Get the name string from image GUID\r
        //\r
        UnicodeSPrint (mGaugeString, sizeof (mGaugeString), L"%g", NameGuid);\r
      }\r
      return;\r
    } else {\r
      //\r
      // Method 5: Get the name string from image DevicePath\r
      //\r
      NameString = ConvertDevicePathToText (DevicePath, TRUE, FALSE);\r
      if (NameString != NULL) {\r
        StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, NameString, DP_GAUGE_STRING_LENGTH);\r
        mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;\r
        FreePool (NameString);\r
        return;\r
      }\r
    }\r
  }\r
\r
  //\r
  // Method 6: Unknown Driver Name\r
  //\r
  StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_ERROR_NAME), NULL);\r
  ASSERT (StringPtr != NULL);\r
  StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, StringPtr, DP_GAUGE_STRING_LENGTH);\r
  FreePool (StringPtr);\r
}\r
\r
/** \r
  Calculate the Duration in microseconds.\r
  \r
  Duration is multiplied by 1000, instead of Frequency being divided by 1000 or\r
  multiplying the result by 1000, in order to maintain precision.  Since Duration is\r
  a 64-bit value, multiplying it by 1000 is unlikely to produce an overflow.\r
  \r
  The time is calculated as (Duration * 1000) / Timer_Frequency.\r
  \r
  @param[in]  Duration   The event duration in timer ticks.\r
  \r
  @return     A 64-bit value which is the Elapsed time in microseconds.\r
**/\r
UINT64\r
DurationInMicroSeconds (\r
  IN UINT64 Duration\r
  )\r
{\r
  return DivU64x32 (Duration, 1000);\r
}\r
\r
/** \r
  Get index of Measurement Record's match in the CumData array.\r
  \r
  If the Measurement's Token value matches a Token in one of the CumData\r
  records, the index of the matching record is returned.  The returned\r
  index is a signed value so that negative values can indicate that\r
  the Measurement didn't match any entry in the CumData array.\r
  \r
  @param[in]  Measurement A pointer to a Measurement Record to match against the CumData array.\r
  \r
  @retval     <0    Token is not in the CumData array.\r
  @retval     >=0   Return value is the index into CumData where Token is found.\r
**/\r
INTN\r
GetCumulativeItem(\r
  IN MEASUREMENT_RECORD   *Measurement\r
  )\r
{\r
  INTN    Index;\r
\r
  for( Index = 0; Index < (INTN)NumCum; ++Index) {\r
    if (AsciiStrCmp (Measurement->Token, CumData[Index].Name) == 0) {\r
      return Index;  // Exit, we found a match\r
    }\r
  }\r
  // If the for loop exits, Token was not found.\r
  return -1;   // Indicate failure\r
}\r
Commit	Line	Data
d41bc92c	1	/** @file\r
	2	Utility functions used by the Dp application.\r
	3	\r
115eae65	4	Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.\r
69af8476	5	(C) Copyright 2015-2016 Hewlett Packard Enterprise Development LP<BR>\r
d41bc92c	6	This program and the accompanying materials\r
	7	are licensed and made available under the terms and conditions of the BSD License\r
	8	which accompanies this distribution. The full text of the license may be found at\r
	9	http://opensource.org/licenses/bsd-license.php\r
	10	\r
	11	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	12	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	13	**/\r
	14	\r
	15	#include <Library/BaseLib.h>\r
	16	#include <Library/BaseMemoryLib.h>\r
	17	#include <Library/MemoryAllocationLib.h>\r
	18	#include <Library/DebugLib.h>\r
	19	#include <Library/UefiBootServicesTableLib.h>\r
d41bc92c	20	#include <Library/PeCoffGetEntryPointLib.h>\r
	21	#include <Library/PrintLib.h>\r
	22	#include <Library/HiiLib.h>\r
	23	#include <Library/PcdLib.h>\r
	24	#include <Library/UefiLib.h>\r
	25	#include <Library/DevicePathLib.h>\r
a71003f2	26	#include <Library/HandleParsingLib.h>\r
d41bc92c	27	\r
	28	#include <Pi/PiFirmwareFile.h>\r
	29	#include <Library/DxeServicesLib.h>\r
	30	\r
	31	#include <Protocol/LoadedImage.h>\r
	32	#include <Protocol/DriverBinding.h>\r
	33	#include <Protocol/ComponentName2.h>\r
	34	#include <Protocol/DevicePath.h>\r
d41bc92c	35	\r
	36	#include <Guid/Performance.h>\r
	37	\r
	38	#include "Dp.h"\r
	39	#include "Literals.h"\r
	40	#include "DpInternal.h"\r
	41	\r
	42	/** \r
	43	Calculate an event's duration in timer ticks.\r
	44	\r
	45	Given the count direction and the event's start and end timer values,\r
	46	calculate the duration of the event in timer ticks. Information for\r
	47	the current measurement is pointed to by the parameter.\r
	48	\r
	49	If the measurement's start time is 1, it indicates that the developer\r
	50	is indicating that the measurement began at the release of reset.\r
	51	The start time is adjusted to the timer's starting count before performing\r
	52	the elapsed time calculation.\r
	53	\r
	54	The calculated duration, in ticks, is the absolute difference between\r
	55	the measurement's ending and starting counts.\r
	56	\r
	57	@param Measurement Pointer to a MEASUREMENT_RECORD structure containing\r
	58	data for the current measurement.\r
	59	\r
	60	@return The 64-bit duration of the event.\r
	61	**/\r
	62	UINT64\r
	63	GetDuration (\r
	64	IN OUT MEASUREMENT_RECORD *Measurement\r
	65	)\r
	66	{\r
	67	UINT64 Duration;\r
	68	BOOLEAN Error;\r
	69	\r
69af8476 CS	70	if (Measurement->EndTimeStamp == 0) {\r
	71	return 0;\r
	72	}\r
	73	\r
115eae65 DB	74	Duration = Measurement->EndTimeStamp - Measurement->StartTimeStamp;\r
115eae65 DB	75	Error = (BOOLEAN)(Duration > Measurement->EndTimeStamp);\r
d41bc92c	76	\r
	77	if (Error) {\r
	78	DEBUG ((EFI_D_ERROR, ALit_TimerLibError));\r
	79	Duration = 0;\r
	80	}\r
	81	return Duration;\r
	82	}\r
	83	\r
	84	/** \r
	85	Determine whether the Measurement record is for an EFI Phase.\r
	86	\r
	87	The Token and Module members of the measurement record are checked.\r
	88	Module must be empty and Token must be one of SEC, PEI, DXE, BDS, or SHELL.\r
	89	\r
	90	@param[in] Measurement A pointer to the Measurement record to test.\r
	91	\r
	92	@retval TRUE The measurement record is for an EFI Phase.\r
	93	@retval FALSE The measurement record is NOT for an EFI Phase.\r
	94	**/\r
	95	BOOLEAN\r
	96	IsPhase(\r
	97	IN MEASUREMENT_RECORD *Measurement\r
	98	)\r
	99	{\r
	100	BOOLEAN RetVal;\r
	101	\r
115eae65 DB	102	RetVal = (BOOLEAN)(\r
	103	((AsciiStrCmp (Measurement->Token, ALit_SEC) == 0) \|\|\r
	104	(AsciiStrCmp (Measurement->Token, ALit_PEI) == 0) \|\|\r
	105	(AsciiStrCmp (Measurement->Token, ALit_DXE) == 0) \|\|\r
	106	(AsciiStrCmp (Measurement->Token, ALit_BDS) == 0))\r
d41bc92c	107	);\r
	108	return RetVal;\r
	109	}\r
	110	\r
f45dd2dd BD	111	/**\r
	112	Determine whether the Measurement record is for core code.\r
	113	\r
	114	@param[in] Measurement A pointer to the Measurement record to test.\r
	115	\r
	116	@retval TRUE The measurement record is used for core.\r
	117	@retval FALSE The measurement record is NOT used for core.\r
	118	\r
	119	**/\r
	120	BOOLEAN\r
	121	IsCorePerf(\r
	122	IN MEASUREMENT_RECORD *Measurement\r
	123	)\r
	124	{\r
	125	BOOLEAN RetVal;\r
	126	\r
	127	RetVal = (BOOLEAN)(\r
	128	((Measurement->Identifier == MODULE_START_ID) \|\|\r
	129	(Measurement->Identifier == MODULE_END_ID) \|\|\r
	130	(Measurement->Identifier == MODULE_LOADIMAGE_START_ID) \|\|\r
	131	(Measurement->Identifier == MODULE_LOADIMAGE_END_ID) \|\|\r
	132	(Measurement->Identifier == MODULE_DB_START_ID) \|\|\r
	133	(Measurement->Identifier == MODULE_DB_END_ID) \|\|\r
	134	(Measurement->Identifier == MODULE_DB_SUPPORT_START_ID) \|\|\r
	135	(Measurement->Identifier == MODULE_DB_SUPPORT_END_ID) \|\|\r
	136	(Measurement->Identifier == MODULE_DB_STOP_START_ID) \|\|\r
	137	(Measurement->Identifier == MODULE_DB_STOP_START_ID))\r
	138	);\r
	139	return RetVal;\r
	140	}\r
	141	\r
d41bc92c	142	/** \r
	143	Get the file name portion of the Pdb File Name.\r
	144	\r
	145	The portion of the Pdb File Name between the last backslash and\r
	146	either a following period or the end of the string is converted\r
	147	to Unicode and copied into UnicodeBuffer. The name is truncated,\r
	148	if necessary, to ensure that UnicodeBuffer is not overrun.\r
	149	\r
	150	@param[in] PdbFileName Pdb file name.\r
	151	@param[out] UnicodeBuffer The resultant Unicode File Name.\r
	152	\r
	153	**/\r
	154	VOID\r
2c55a81a	155	DpGetShortPdbFileName (\r
d41bc92c	156	IN CHAR8 *PdbFileName,\r
	157	OUT CHAR16 *UnicodeBuffer\r
	158	)\r
	159	{\r
	160	UINTN IndexA; // Current work location within an ASCII string.\r
	161	UINTN IndexU; // Current work location within a Unicode string.\r
	162	UINTN StartIndex;\r
	163	UINTN EndIndex;\r
	164	\r
e75390f0	165	ZeroMem (UnicodeBuffer, (DP_GAUGE_STRING_LENGTH + 1) * sizeof (CHAR16));\r
d41bc92c	166	\r
d41bc92c	167	if (PdbFileName == NULL) {\r
e75390f0	168	StrnCpyS (UnicodeBuffer, DP_GAUGE_STRING_LENGTH + 1, L" ", 1);\r
d41bc92c	169	} else {\r
	170	StartIndex = 0;\r
	171	for (EndIndex = 0; PdbFileName[EndIndex] != 0; EndIndex++)\r
	172	;\r
	173	for (IndexA = 0; PdbFileName[IndexA] != 0; IndexA++) {\r
9248d551	174	if ((PdbFileName[IndexA] == '\\') \|\| (PdbFileName[IndexA] == '/')) {\r
d41bc92c	175	StartIndex = IndexA + 1;\r
	176	}\r
	177	\r
	178	if (PdbFileName[IndexA] == '.') {\r
	179	EndIndex = IndexA;\r
	180	}\r
	181	}\r
	182	\r
	183	IndexU = 0;\r
	184	for (IndexA = StartIndex; IndexA < EndIndex; IndexA++) {\r
	185	UnicodeBuffer[IndexU] = (CHAR16) PdbFileName[IndexA];\r
	186	IndexU++;\r
b9ffeab7 SZ	187	if (IndexU >= DP_GAUGE_STRING_LENGTH) {\r
b9ffeab7 SZ	188	UnicodeBuffer[DP_GAUGE_STRING_LENGTH] = 0;\r
d41bc92c	189	break;\r
	190	}\r
	191	}\r
	192	}\r
	193	}\r
	194	\r
	195	/** \r
	196	Get a human readable name for an image handle.\r
	197	The following methods will be tried orderly:\r
	198	1. Image PDB\r
	199	2. ComponentName2 protocol\r
	200	3. FFS UI section\r
	201	4. Image GUID\r
	202	5. Image DevicePath\r
	203	6. Unknown Driver Name\r
	204	\r
	205	@param[in] Handle\r
	206	\r
	207	@post The resulting Unicode name string is stored in the\r
	208	mGaugeString global array.\r
	209	\r
	210	**/\r
	211	VOID\r
2c55a81a	212	DpGetNameFromHandle (\r
d41bc92c	213	IN EFI_HANDLE Handle\r
	214	)\r
	215	{\r
92034c4c RN	216	EFI_STATUS Status;\r
	217	EFI_LOADED_IMAGE_PROTOCOL *Image;\r
	218	CHAR8 *PdbFileName;\r
	219	EFI_DRIVER_BINDING_PROTOCOL *DriverBinding;\r
	220	EFI_STRING StringPtr;\r
	221	EFI_DEVICE_PATH_PROTOCOL *LoadedImageDevicePath;\r
	222	EFI_DEVICE_PATH_PROTOCOL *DevicePath;\r
	223	EFI_GUID *NameGuid;\r
	224	CHAR16 *NameString;\r
	225	UINTN StringSize;\r
	226	CHAR8 *PlatformLanguage;\r
	227	CHAR8 *BestLanguage;\r
	228	EFI_COMPONENT_NAME2_PROTOCOL *ComponentName2;\r
d41bc92c	229	\r
3b672240 SZ	230	Image = NULL;\r
	231	LoadedImageDevicePath = NULL;\r
	232	DevicePath = NULL;\r
	233	\r
d41bc92c	234	//\r
	235	// Method 1: Get the name string from image PDB\r
	236	//\r
	237	Status = gBS->HandleProtocol (\r
	238	Handle,\r
	239	&gEfiLoadedImageProtocolGuid,\r
	240	(VOID **) &Image\r
	241	);\r
	242	\r
	243	if (EFI_ERROR (Status)) {\r
	244	Status = gBS->OpenProtocol (\r
	245	Handle,\r
	246	&gEfiDriverBindingProtocolGuid,\r
	247	(VOID **) &DriverBinding,\r
	248	NULL,\r
	249	NULL,\r
	250	EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
	251	);\r
	252	if (!EFI_ERROR (Status)) {\r
	253	Status = gBS->HandleProtocol (\r
	254	DriverBinding->ImageHandle,\r
	255	&gEfiLoadedImageProtocolGuid,\r
	256	(VOID **) &Image\r
	257	);\r
	258	}\r
	259	}\r
	260	\r
	261	if (!EFI_ERROR (Status)) {\r
	262	PdbFileName = PeCoffLoaderGetPdbPointer (Image->ImageBase);\r
	263	\r
	264	if (PdbFileName != NULL) {\r
2c55a81a	265	DpGetShortPdbFileName (PdbFileName, mGaugeString);\r
d41bc92c	266	return;\r
	267	}\r
	268	}\r
	269	\r
	270	//\r
	271	// Method 2: Get the name string from ComponentName2 protocol\r
	272	//\r
	273	Status = gBS->HandleProtocol (\r
	274	Handle,\r
	275	&gEfiComponentName2ProtocolGuid,\r
	276	(VOID **) &ComponentName2\r
	277	);\r
	278	if (!EFI_ERROR (Status)) {\r
	279	//\r
92034c4c	280	// Firstly use platform language setting, secondly use driver's first supported language.\r
d41bc92c	281	//\r
92034c4c RN	282	GetVariable2 (L"PlatformLang", &gEfiGlobalVariableGuid, (VOID**)&PlatformLanguage, NULL);\r
	283	BestLanguage = GetBestLanguage(\r
	284	ComponentName2->SupportedLanguages,\r
	285	FALSE,\r
	286	(PlatformLanguage != NULL) ? PlatformLanguage : "",\r
	287	ComponentName2->SupportedLanguages,\r
	288	NULL\r
	289	);\r
	290	SHELL_FREE_NON_NULL (PlatformLanguage);\r
	291	\r
d41bc92c	292	Status = ComponentName2->GetDriverName (\r
d41bc92c	293	ComponentName2,\r
92034c4c	294	BestLanguage != NULL ? BestLanguage : "en-US",\r
d41bc92c	295	&StringPtr\r
	296	);\r
	297	if (!EFI_ERROR (Status)) {\r
92034c4c	298	SHELL_FREE_NON_NULL (BestLanguage);\r
4dc0d578	299	StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, StringPtr, DP_GAUGE_STRING_LENGTH);\r
d41bc92c	300	mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;\r
	301	return;\r
	302	}\r
	303	}\r
	304	\r
	305	Status = gBS->HandleProtocol (\r
	306	Handle,\r
	307	&gEfiLoadedImageDevicePathProtocolGuid,\r
	308	(VOID **) &LoadedImageDevicePath\r
	309	);\r
	310	if (!EFI_ERROR (Status) && (LoadedImageDevicePath != NULL)) {\r
	311	DevicePath = LoadedImageDevicePath;\r
3b672240 SZ	312	} else if (Image != NULL) {\r
	313	DevicePath = Image->FilePath;\r
	314	}\r
d41bc92c	315	\r
3b672240	316	if (DevicePath != NULL) {\r
d41bc92c	317	//\r
3b672240	318	// Try to get image GUID from image DevicePath\r
d41bc92c	319	//\r
	320	NameGuid = NULL;\r
	321	while (!IsDevicePathEndType (DevicePath)) {\r
	322	NameGuid = EfiGetNameGuidFromFwVolDevicePathNode ((MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *) DevicePath);\r
	323	if (NameGuid != NULL) {\r
	324	break;\r
	325	}\r
	326	DevicePath = NextDevicePathNode (DevicePath);\r
	327	}\r
	328	\r
	329	if (NameGuid != NULL) {\r
	330	//\r
	331	// Try to get the image's FFS UI section by image GUID\r
	332	//\r
	333	NameString = NULL;\r
	334	StringSize = 0;\r
	335	Status = GetSectionFromAnyFv (\r
	336	NameGuid,\r
	337	EFI_SECTION_USER_INTERFACE,\r
	338	0,\r
	339	(VOID **) &NameString,\r
	340	&StringSize\r
	341	);\r
	342	\r
	343	if (!EFI_ERROR (Status)) {\r
	344	//\r
	345	// Method 3. Get the name string from FFS UI section\r
	346	//\r
4dc0d578	347	StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, NameString, DP_GAUGE_STRING_LENGTH);\r
d41bc92c	348	mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;\r
	349	FreePool (NameString);\r
	350	} else {\r
	351	//\r
	352	// Method 4: Get the name string from image GUID\r
	353	//\r
	354	UnicodeSPrint (mGaugeString, sizeof (mGaugeString), L"%g", NameGuid);\r
	355	}\r
	356	return;\r
	357	} else {\r
	358	//\r
	359	// Method 5: Get the name string from image DevicePath\r
	360	//\r
3b672240	361	NameString = ConvertDevicePathToText (DevicePath, TRUE, FALSE);\r
863986b3	362	if (NameString != NULL) {\r
4dc0d578	363	StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, NameString, DP_GAUGE_STRING_LENGTH);\r
863986b3 RN	364	mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;\r
	365	FreePool (NameString);\r
	366	return;\r
d41bc92c	367	}\r
	368	}\r
	369	}\r
	370	\r
	371	//\r
	372	// Method 6: Unknown Driver Name\r
	373	//\r
92034c4c	374	StringPtr = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_ERROR_NAME), NULL);\r
d41bc92c	375	ASSERT (StringPtr != NULL);\r
4dc0d578	376	StrnCpyS (mGaugeString, DP_GAUGE_STRING_LENGTH + 1, StringPtr, DP_GAUGE_STRING_LENGTH);\r
d41bc92c	377	FreePool (StringPtr);\r
	378	}\r
	379	\r
	380	/** \r
	381	Calculate the Duration in microseconds.\r
	382	\r
	383	Duration is multiplied by 1000, instead of Frequency being divided by 1000 or\r
	384	multiplying the result by 1000, in order to maintain precision. Since Duration is\r
	385	a 64-bit value, multiplying it by 1000 is unlikely to produce an overflow.\r
	386	\r
	387	The time is calculated as (Duration * 1000) / Timer_Frequency.\r
	388	\r
	389	@param[in] Duration The event duration in timer ticks.\r
	390	\r
	391	@return A 64-bit value which is the Elapsed time in microseconds.\r
	392	**/\r
	393	UINT64\r
	394	DurationInMicroSeconds (\r
	395	IN UINT64 Duration\r
	396	)\r
	397	{\r
115eae65	398	return DivU64x32 (Duration, 1000);\r
d41bc92c	399	}\r
	400	\r
	401	/** \r
	402	Get index of Measurement Record's match in the CumData array.\r
	403	\r
	404	If the Measurement's Token value matches a Token in one of the CumData\r
	405	records, the index of the matching record is returned. The returned\r
	406	index is a signed value so that negative values can indicate that\r
	407	the Measurement didn't match any entry in the CumData array.\r
	408	\r
	409	@param[in] Measurement A pointer to a Measurement Record to match against the CumData array.\r
	410	\r
	411	@retval <0 Token is not in the CumData array.\r
	412	@retval >=0 Return value is the index into CumData where Token is found.\r
	413	**/\r
	414	INTN\r
	415	GetCumulativeItem(\r
	416	IN MEASUREMENT_RECORD *Measurement\r
	417	)\r
	418	{\r
	419	INTN Index;\r
	420	\r
	421	for( Index = 0; Index < (INTN)NumCum; ++Index) {\r
115eae65	422	if (AsciiStrCmp (Measurement->Token, CumData[Index].Name) == 0) {\r
d41bc92c	423	return Index; // Exit, we found a match\r
	424	}\r
	425	}\r
	426	// If the for loop exits, Token was not found.\r
	427	return -1; // Indicate failure\r
	428	}\r