UefiCpuPkg/PiSmmCpu: Add 2 APIs in SmmCpuFeaturesLib.

[mirror_edk2.git] / UefiCpuPkg / Library / SmmCpuFeaturesLib / SmmCpuFeaturesLib.c

/** @file\r
The CPU specific programming for PiSmmCpuDxeSmm module.\r
\r
Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include <PiSmm.h>\r
#include <Library/SmmCpuFeaturesLib.h>\r
#include <Library/BaseLib.h>\r
#include <Library/MtrrLib.h>\r
#include <Library/PcdLib.h>\r
#include <Library/MemoryAllocationLib.h>\r
#include <Library/DebugLib.h>\r
#include <Register/Cpuid.h>\r
#include <Register/SmramSaveStateMap.h>\r
\r
//\r
// Machine Specific Registers (MSRs)\r
//\r
#define  SMM_FEATURES_LIB_IA32_MTRR_CAP            0x0FE\r
#define  SMM_FEATURES_LIB_IA32_FEATURE_CONTROL     0x03A\r
#define  SMM_FEATURES_LIB_IA32_SMRR_PHYSBASE       0x1F2\r
#define  SMM_FEATURES_LIB_IA32_SMRR_PHYSMASK       0x1F3\r
#define  SMM_FEATURES_LIB_IA32_CORE_SMRR_PHYSBASE  0x0A0\r
#define  SMM_FEATURES_LIB_IA32_CORE_SMRR_PHYSMASK  0x0A1\r
#define    EFI_MSR_SMRR_MASK                       0xFFFFF000\r
#define    EFI_MSR_SMRR_PHYS_MASK_VALID            BIT11\r
#define  SMM_FEATURES_LIB_SMM_FEATURE_CONTROL      0x4E0\r
\r
//\r
// MSRs required for configuration of SMM Code Access Check\r
//\r
#define SMM_FEATURES_LIB_IA32_MCA_CAP              0x17D\r
#define   SMM_CODE_ACCESS_CHK_BIT                  BIT58\r
\r
//\r
// Set default value to assume SMRR is not supported\r
//\r
BOOLEAN  mSmrrSupported = FALSE;\r
\r
//\r
// Set default value to assume MSR_SMM_FEATURE_CONTROL is not supported\r
//\r
BOOLEAN  mSmmFeatureControlSupported = FALSE;\r
\r
//\r
// Set default value to assume IA-32 Architectural MSRs are used\r
//\r
UINT32  mSmrrPhysBaseMsr = SMM_FEATURES_LIB_IA32_SMRR_PHYSBASE;\r
UINT32  mSmrrPhysMaskMsr = SMM_FEATURES_LIB_IA32_SMRR_PHYSMASK;\r
\r
//\r
// Set default value to assume MTRRs need to be configured on each SMI\r
//\r
BOOLEAN  mNeedConfigureMtrrs = TRUE;\r
\r
//\r
// Array for state of SMRR enable on all CPUs\r
//\r
BOOLEAN  *mSmrrEnabled;\r
\r
/**\r
  The constructor function\r
\r
  @param[in]  ImageHandle  The firmware allocated handle for the EFI image.\r
  @param[in]  SystemTable  A pointer to the EFI System Table.\r
\r
  @retval EFI_SUCCESS      The constructor always returns EFI_SUCCESS.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmCpuFeaturesLibConstructor (\r
  IN EFI_HANDLE        ImageHandle,\r
  IN EFI_SYSTEM_TABLE  *SystemTable\r
  )\r
{\r
  UINT32  RegEax;\r
  UINT32  RegEdx;\r
  UINTN   FamilyId;\r
  UINTN   ModelId;\r
\r
  //\r
  // Retrieve CPU Family and Model\r
  //\r
  AsmCpuid (CPUID_VERSION_INFO, &RegEax, NULL, NULL, &RegEdx);\r
  FamilyId = (RegEax >> 8) & 0xf;\r
  ModelId  = (RegEax >> 4) & 0xf;\r
  if (FamilyId == 0x06 || FamilyId == 0x0f) {\r
    ModelId = ModelId | ((RegEax >> 12) & 0xf0);\r
  }\r
\r
  //\r
  // Check CPUID(CPUID_VERSION_INFO).EDX[12] for MTRR capability\r
  //\r
  if ((RegEdx & BIT12) != 0) {\r
    //\r
    // Check MTRR_CAP MSR bit 11 for SMRR support\r
    //\r
    if ((AsmReadMsr64 (SMM_FEATURES_LIB_IA32_MTRR_CAP) & BIT11) != 0) {\r
      mSmrrSupported = TRUE;\r
    }\r
  }\r
\r
  //\r
  // Intel(R) 64 and IA-32 Architectures Software Developer's Manual\r
  // Volume 3C, Section 35.3 MSRs in the Intel(R) Atom(TM) Processor Family\r
  //\r
  // If CPU Family/Model is 06_1CH, 06_26H, 06_27H, 06_35H or 06_36H, then\r
  // SMRR Physical Base and SMM Physical Mask MSRs are not available.\r
  //\r
  if (FamilyId == 0x06) {\r
    if (ModelId == 0x1C || ModelId == 0x26 || ModelId == 0x27 || ModelId == 0x35 || ModelId == 0x36) {\r
      mSmrrSupported = FALSE;\r
    }\r
  }\r
\r
  //\r
  // Intel(R) 64 and IA-32 Architectures Software Developer's Manual\r
  // Volume 3C, Section 35.2 MSRs in the Intel(R) Core(TM) 2 Processor Family\r
  //\r
  // If CPU Family/Model is 06_0F or 06_17, then use Intel(R) Core(TM) 2\r
  // Processor Family MSRs\r
  //\r
  if (FamilyId == 0x06) {\r
    if (ModelId == 0x17 || ModelId == 0x0f) {\r
      mSmrrPhysBaseMsr = SMM_FEATURES_LIB_IA32_CORE_SMRR_PHYSBASE;\r
      mSmrrPhysMaskMsr = SMM_FEATURES_LIB_IA32_CORE_SMRR_PHYSMASK;\r
    }\r
  }\r
\r
  //\r
  // Intel(R) 64 and IA-32 Architectures Software Developer's Manual\r
  // Volume 3C, Section 34.4.2 SMRAM Caching\r
  //   An IA-32 processor does not automatically write back and invalidate its\r
  //   caches before entering SMM or before exiting SMM. Because of this behavior,\r
  //   care must be taken in the placement of the SMRAM in system memory and in\r
  //   the caching of the SMRAM to prevent cache incoherence when switching back\r
  //   and forth between SMM and protected mode operation.\r
  //\r
  // An IA-32 processor is a processor that does not support the Intel 64\r
  // Architecture.  Support for the Intel 64 Architecture can be detected from\r
  // CPUID(CPUID_EXTENDED_CPU_SIG).EDX[29]\r
  //\r
  // If an IA-32 processor is detected, then set mNeedConfigureMtrrs to TRUE,\r
  // so caches are flushed on SMI entry and SMI exit, the interrupted code\r
  // MTRRs are saved/restored, and MTRRs for SMM are loaded.\r
  //\r
  AsmCpuid (CPUID_EXTENDED_FUNCTION, &RegEax, NULL, NULL, NULL);\r
  if (RegEax >= CPUID_EXTENDED_CPU_SIG) {\r
    AsmCpuid (CPUID_EXTENDED_CPU_SIG, NULL, NULL, NULL, &RegEdx);\r
    if ((RegEdx & BIT29) != 0) {\r
      mNeedConfigureMtrrs = FALSE;\r
    }\r
  }\r
\r
  //\r
  // Allocate array for state of SMRR enable on all CPUs\r
  //\r
  mSmrrEnabled = (BOOLEAN *)AllocatePool (sizeof (BOOLEAN) * PcdGet32 (PcdCpuMaxLogicalProcessorNumber));\r
  ASSERT (mSmrrEnabled != NULL);\r
\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  Called during the very first SMI into System Management Mode to initialize\r
  CPU features, including SMBASE, for the currently executing CPU.  Since this\r
  is the first SMI, the SMRAM Save State Map is at the default address of\r
  SMM_DEFAULT_SMBASE + SMRAM_SAVE_STATE_MAP_OFFSET.  The currently executing\r
  CPU is specified by CpuIndex and CpuIndex can be used to access information\r
  about the currently executing CPU in the ProcessorInfo array and the\r
  HotPlugCpuData data structure.\r
\r
  @param[in] CpuIndex        The index of the CPU to initialize.  The value\r
                             must be between 0 and the NumberOfCpus field in\r
                             the System Management System Table (SMST).\r
  @param[in] IsMonarch       TRUE if the CpuIndex is the index of the CPU that\r
                             was elected as monarch during System Management\r
                             Mode initialization.\r
                             FALSE if the CpuIndex is not the index of the CPU\r
                             that was elected as monarch during System\r
                             Management Mode initialization.\r
  @param[in] ProcessorInfo   Pointer to an array of EFI_PROCESSOR_INFORMATION\r
                             structures.  ProcessorInfo[CpuIndex] contains the\r
                             information for the currently executing CPU.\r
  @param[in] CpuHotPlugData  Pointer to the CPU_HOT_PLUG_DATA structure that\r
                             contains the ApidId and SmBase arrays.\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesInitializeProcessor (\r
  IN UINTN                      CpuIndex,\r
  IN BOOLEAN                    IsMonarch,\r
  IN EFI_PROCESSOR_INFORMATION  *ProcessorInfo,\r
  IN CPU_HOT_PLUG_DATA          *CpuHotPlugData\r
  )\r
{\r
  SMRAM_SAVE_STATE_MAP  *CpuState;\r
  UINT64                FeatureControl;\r
  UINT32                RegEax;\r
  UINT32                RegEdx;\r
  UINTN                 FamilyId;\r
  UINTN                 ModelId;\r
\r
  //\r
  // Configure SMBASE.\r
  //\r
  CpuState = (SMRAM_SAVE_STATE_MAP *)(UINTN)(SMM_DEFAULT_SMBASE + SMRAM_SAVE_STATE_MAP_OFFSET);\r
  CpuState->x86.SMBASE = (UINT32)CpuHotPlugData->SmBase[CpuIndex];\r
\r
  //\r
  // Intel(R) 64 and IA-32 Architectures Software Developer's Manual\r
  // Volume 3C, Section 35.2 MSRs in the Intel(R) Core(TM) 2 Processor Family\r
  //\r
  // If Intel(R) Core(TM) Core(TM) 2 Processor Family MSRs are being used, then\r
  // make sure SMRR Enable(BIT3) of MSR_FEATURE_CONTROL MSR(0x3A) is set before\r
  // accessing SMRR base/mask MSRs.  If Lock(BIT0) of MSR_FEATURE_CONTROL MSR(0x3A)\r
  // is set, then the MSR is locked and can not be modified.\r
  //\r
  if (mSmrrSupported && mSmrrPhysBaseMsr == SMM_FEATURES_LIB_IA32_CORE_SMRR_PHYSBASE) {\r
    FeatureControl = AsmReadMsr64 (SMM_FEATURES_LIB_IA32_FEATURE_CONTROL);\r
    if ((FeatureControl & BIT3) == 0) {\r
      if ((FeatureControl & BIT0) == 0) {\r
        AsmWriteMsr64 (SMM_FEATURES_LIB_IA32_FEATURE_CONTROL, FeatureControl | BIT3);\r
      } else {\r
        mSmrrSupported = FALSE;\r
      }\r
    }\r
  }\r
\r
  //\r
  // If SMRR is supported, then program SMRR base/mask MSRs.\r
  // The EFI_MSR_SMRR_PHYS_MASK_VALID bit is not set until the first normal SMI.\r
  // The code that initializes SMM environment is running in normal mode\r
  // from SMRAM region.  If SMRR is enabled here, then the SMRAM region\r
  // is protected and the normal mode code execution will fail.\r
  //\r
  if (mSmrrSupported) {\r
    AsmWriteMsr64 (mSmrrPhysBaseMsr, CpuHotPlugData->SmrrBase | MTRR_CACHE_WRITE_BACK);\r
    AsmWriteMsr64 (mSmrrPhysMaskMsr, (~(CpuHotPlugData->SmrrSize - 1) & EFI_MSR_SMRR_MASK));\r
    mSmrrEnabled[CpuIndex] = FALSE;\r
  }\r
\r
  //\r
  // Retrieve CPU Family and Model\r
  //\r
  AsmCpuid (CPUID_VERSION_INFO, &RegEax, NULL, NULL, &RegEdx);\r
  FamilyId = (RegEax >> 8) & 0xf;\r
  ModelId  = (RegEax >> 4) & 0xf;\r
  if (FamilyId == 0x06 || FamilyId == 0x0f) {\r
    ModelId = ModelId | ((RegEax >> 12) & 0xf0);\r
  }\r
\r
  //\r
  // Intel(R) 64 and IA-32 Architectures Software Developer's Manual\r
  // Volume 3C, Section 35.10.1 MSRs in 4th Generation Intel(R) Core(TM)\r
  // Processor Family.\r
  //\r
  // If CPU Family/Model is 06_3C, 06_45, or 06_46 then use 4th Generation\r
  // Intel(R) Core(TM) Processor Family MSRs.\r
  //\r
  if (FamilyId == 0x06) {\r
    if (ModelId == 0x3C || ModelId == 0x45 || ModelId == 0x46) {\r
      //\r
      // Check to see if the CPU supports the SMM Code Access Check feature\r
      // Do not access this MSR unless the CPU supports the SmmRegFeatureControl\r
      //\r
      if ((AsmReadMsr64 (SMM_FEATURES_LIB_IA32_MCA_CAP) & SMM_CODE_ACCESS_CHK_BIT) != 0) {\r
        mSmmFeatureControlSupported = TRUE;\r
      }\r
    }\r
  }\r
}\r
\r
/**\r
  This function updates the SMRAM save state on the currently executing CPU\r
  to resume execution at a specific address after an RSM instruction.  This\r
  function must evaluate the SMRAM save state to determine the execution mode\r
  the RSM instruction resumes and update the resume execution address with\r
  either NewInstructionPointer32 or NewInstructionPoint.  The auto HALT restart\r
  flag in the SMRAM save state must always be cleared.  This function returns\r
  the value of the instruction pointer from the SMRAM save state that was\r
  replaced.  If this function returns 0, then the SMRAM save state was not\r
  modified.\r
\r
  This function is called during the very first SMI on each CPU after\r
  SmmCpuFeaturesInitializeProcessor() to set a flag in normal execution mode\r
  to signal that the SMBASE of each CPU has been updated before the default\r
  SMBASE address is used for the first SMI to the next CPU.\r
\r
  @param[in] CpuIndex                 The index of the CPU to hook.  The value\r
                                      must be between 0 and the NumberOfCpus\r
                                      field in the System Management System Table\r
                                      (SMST).\r
  @param[in] CpuState                 Pointer to SMRAM Save State Map for the\r
                                      currently executing CPU.\r
  @param[in] NewInstructionPointer32  Instruction pointer to use if resuming to\r
                                      32-bit execution mode from 64-bit SMM.\r
  @param[in] NewInstructionPointer    Instruction pointer to use if resuming to\r
                                      same execution mode as SMM.\r
\r
  @retval 0    This function did modify the SMRAM save state.\r
  @retval > 0  The original instruction pointer value from the SMRAM save state\r
               before it was replaced.\r
**/\r
UINT64\r
EFIAPI\r
SmmCpuFeaturesHookReturnFromSmm (\r
  IN UINTN                 CpuIndex,\r
  IN SMRAM_SAVE_STATE_MAP  *CpuState,\r
  IN UINT64                NewInstructionPointer32,\r
  IN UINT64                NewInstructionPointer\r
  )\r
{\r
  return 0;\r
}\r
\r
/**\r
  Hook point in normal execution mode that allows the one CPU that was elected\r
  as monarch during System Management Mode initialization to perform additional\r
  initialization actions immediately after all of the CPUs have processed their\r
  first SMI and called SmmCpuFeaturesInitializeProcessor() relocating SMBASE\r
  into a buffer in SMRAM and called SmmCpuFeaturesHookReturnFromSmm().\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesSmmRelocationComplete (\r
  VOID\r
  )\r
{\r
}\r
\r
/**\r
  Return the size, in bytes, of a custom SMI Handler in bytes.  If 0 is\r
  returned, then a custom SMI handler is not provided by this library,\r
  and the default SMI handler must be used.\r
\r
  @retval 0    Use the default SMI handler.\r
  @retval > 0  Use the SMI handler installed by SmmCpuFeaturesInstallSmiHandler()\r
               The caller is required to allocate enough SMRAM for each CPU to\r
               support the size of the custom SMI handler.\r
**/\r
UINTN\r
EFIAPI\r
SmmCpuFeaturesGetSmiHandlerSize (\r
  VOID\r
  )\r
{\r
  return 0;\r
}\r
\r
/**\r
  Install a custom SMI handler for the CPU specified by CpuIndex.  This function\r
  is only called if SmmCpuFeaturesGetSmiHandlerSize() returns a size is greater\r
  than zero and is called by the CPU that was elected as monarch during System\r
  Management Mode initialization.\r
\r
  @param[in] CpuIndex   The index of the CPU to install the custom SMI handler.\r
                        The value must be between 0 and the NumberOfCpus field\r
                        in the System Management System Table (SMST).\r
  @param[in] SmBase     The SMBASE address for the CPU specified by CpuIndex.\r
  @param[in] SmiStack   The stack to use when an SMI is processed by the\r
                        the CPU specified by CpuIndex.\r
  @param[in] StackSize  The size, in bytes, if the stack used when an SMI is\r
                        processed by the CPU specified by CpuIndex.\r
  @param[in] GdtBase    The base address of the GDT to use when an SMI is\r
                        processed by the CPU specified by CpuIndex.\r
  @param[in] GdtSize    The size, in bytes, of the GDT used when an SMI is\r
                        processed by the CPU specified by CpuIndex.\r
  @param[in] IdtBase    The base address of the IDT to use when an SMI is\r
                        processed by the CPU specified by CpuIndex.\r
  @param[in] IdtSize    The size, in bytes, of the IDT used when an SMI is\r
                        processed by the CPU specified by CpuIndex.\r
  @param[in] Cr3        The base address of the page tables to use when an SMI\r
                        is processed by the CPU specified by CpuIndex.\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesInstallSmiHandler (\r
  IN UINTN   CpuIndex,\r
  IN UINT32  SmBase,\r
  IN VOID    *SmiStack,\r
  IN UINTN   StackSize,\r
  IN UINTN   GdtBase,\r
  IN UINTN   GdtSize,\r
  IN UINTN   IdtBase,\r
  IN UINTN   IdtSize,\r
  IN UINT32  Cr3\r
  )\r
{\r
}\r
\r
/**\r
  Determines if MTRR registers must be configured to set SMRAM cache-ability\r
  when executing in System Management Mode.\r
\r
  @retval TRUE   MTRR registers must be configured to set SMRAM cache-ability.\r
  @retval FALSE  MTRR registers do not need to be configured to set SMRAM\r
                 cache-ability.\r
**/\r
BOOLEAN\r
EFIAPI\r
SmmCpuFeaturesNeedConfigureMtrrs (\r
  VOID\r
  )\r
{\r
  return mNeedConfigureMtrrs;\r
}\r
\r
/**\r
  Disable SMRR register if SMRR is supported and SmmCpuFeaturesNeedConfigureMtrrs()\r
  returns TRUE.\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesDisableSmrr (\r
  VOID\r
  )\r
{\r
  if (mSmrrSupported && mNeedConfigureMtrrs) {\r
    AsmWriteMsr64 (mSmrrPhysMaskMsr, AsmReadMsr64(mSmrrPhysMaskMsr) & ~EFI_MSR_SMRR_PHYS_MASK_VALID);\r
  }\r
}\r
\r
/**\r
  Enable SMRR register if SMRR is supported and SmmCpuFeaturesNeedConfigureMtrrs()\r
  returns TRUE.\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesReenableSmrr (\r
  VOID\r
  )\r
{\r
  if (mSmrrSupported && mNeedConfigureMtrrs) {\r
    AsmWriteMsr64 (mSmrrPhysMaskMsr, AsmReadMsr64(mSmrrPhysMaskMsr) | EFI_MSR_SMRR_PHYS_MASK_VALID);\r
  }\r
}\r
\r
/**\r
  Processor specific hook point each time a CPU enters System Management Mode.\r
\r
  @param[in] CpuIndex  The index of the CPU that has entered SMM.  The value\r
                       must be between 0 and the NumberOfCpus field in the\r
                       System Management System Table (SMST).\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesRendezvousEntry (\r
  IN UINTN  CpuIndex\r
  )\r
{\r
  //\r
  // If SMRR is supported and this is the first normal SMI, then enable SMRR\r
  //\r
  if (mSmrrSupported && !mSmrrEnabled[CpuIndex]) {\r
    AsmWriteMsr64 (mSmrrPhysMaskMsr, AsmReadMsr64 (mSmrrPhysMaskMsr) | EFI_MSR_SMRR_PHYS_MASK_VALID);\r
    mSmrrEnabled[CpuIndex] = TRUE;\r
  }\r
}\r
\r
/**\r
  Processor specific hook point each time a CPU exits System Management Mode.\r
\r
  @param[in] CpuIndex  The index of the CPU that is exiting SMM.  The value must\r
                       be between 0 and the NumberOfCpus field in the System\r
                       Management System Table (SMST).\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesRendezvousExit (\r
  IN UINTN  CpuIndex\r
  )\r
{\r
}\r
\r
/**\r
  Check to see if an SMM register is supported by a specified CPU.\r
\r
  @param[in] CpuIndex  The index of the CPU to check for SMM register support.\r
                       The value must be between 0 and the NumberOfCpus field\r
                       in the System Management System Table (SMST).\r
  @param[in] RegName   Identifies the SMM register to check for support.\r
\r
  @retval TRUE   The SMM register specified by RegName is supported by the CPU\r
                 specified by CpuIndex.\r
  @retval FALSE  The SMM register specified by RegName is not supported by the\r
                 CPU specified by CpuIndex.\r
**/\r
BOOLEAN\r
EFIAPI\r
SmmCpuFeaturesIsSmmRegisterSupported (\r
  IN UINTN         CpuIndex,\r
  IN SMM_REG_NAME  RegName\r
  )\r
{\r
  if (mSmmFeatureControlSupported && RegName == SmmRegFeatureControl) {\r
    return TRUE;\r
  }\r
  return FALSE;\r
}\r
\r
/**\r
  Returns the current value of the SMM register for the specified CPU.\r
  If the SMM register is not supported, then 0 is returned.\r
\r
  @param[in] CpuIndex  The index of the CPU to read the SMM register.  The\r
                       value must be between 0 and the NumberOfCpus field in\r
                       the System Management System Table (SMST).\r
  @param[in] RegName   Identifies the SMM register to read.\r
\r
  @return  The value of the SMM register specified by RegName from the CPU\r
           specified by CpuIndex.\r
**/\r
UINT64\r
EFIAPI\r
SmmCpuFeaturesGetSmmRegister (\r
  IN UINTN         CpuIndex,\r
  IN SMM_REG_NAME  RegName\r
  )\r
{\r
  if (mSmmFeatureControlSupported && RegName == SmmRegFeatureControl) {\r
    return AsmReadMsr64 (SMM_FEATURES_LIB_SMM_FEATURE_CONTROL);\r
  }\r
  return 0;\r
}\r
\r
/**\r
  Sets the value of an SMM register on a specified CPU.\r
  If the SMM register is not supported, then no action is performed.\r
\r
  @param[in] CpuIndex  The index of the CPU to write the SMM register.  The\r
                       value must be between 0 and the NumberOfCpus field in\r
                       the System Management System Table (SMST).\r
  @param[in] RegName   Identifies the SMM register to write.\r
                       registers are read-only.\r
  @param[in] Value     The value to write to the SMM register.\r
**/\r
VOID\r
EFIAPI\r
SmmCpuFeaturesSetSmmRegister (\r
  IN UINTN         CpuIndex,\r
  IN SMM_REG_NAME  RegName,\r
  IN UINT64        Value\r
  )\r
{\r
  if (mSmmFeatureControlSupported && RegName == SmmRegFeatureControl) {\r
    AsmWriteMsr64 (SMM_FEATURES_LIB_SMM_FEATURE_CONTROL, Value);\r
  }\r
}\r
\r
/**\r
  Read an SMM Save State register on the target processor.  If this function\r
  returns EFI_UNSUPPORTED, then the caller is responsible for reading the\r
  SMM Save Sate register.\r
\r
  @param[in]  CpuIndex  The index of the CPU to read the SMM Save State.  The\r
                        value must be between 0 and the NumberOfCpus field in\r
                        the System Management System Table (SMST).\r
  @param[in]  Register  The SMM Save State register to read.\r
  @param[in]  Width     The number of bytes to read from the CPU save state.\r
  @param[out] Buffer    Upon return, this holds the CPU register value read\r
                        from the save state.\r
\r
  @retval EFI_SUCCESS           The register was read from Save State.\r
  @retval EFI_INVALID_PARAMTER  Buffer is NULL.\r
  @retval EFI_UNSUPPORTED       This function does not support reading Register.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmCpuFeaturesReadSaveStateRegister (\r
  IN  UINTN                        CpuIndex,\r
  IN  EFI_SMM_SAVE_STATE_REGISTER  Register,\r
  IN  UINTN                        Width,\r
  OUT VOID                         *Buffer\r
  )\r
{\r
  return EFI_UNSUPPORTED;\r
}\r
\r
/**\r
  Writes an SMM Save State register on the target processor.  If this function\r
  returns EFI_UNSUPPORTED, then the caller is responsible for writing the\r
  SMM Save Sate register.\r
\r
  @param[in] CpuIndex  The index of the CPU to write the SMM Save State.  The\r
                       value must be between 0 and the NumberOfCpus field in\r
                       the System Management System Table (SMST).\r
  @param[in] Register  The SMM Save State register to write.\r
  @param[in] Width     The number of bytes to write to the CPU save state.\r
  @param[in] Buffer    Upon entry, this holds the new CPU register value.\r
\r
  @retval EFI_SUCCESS           The register was written to Save State.\r
  @retval EFI_INVALID_PARAMTER  Buffer is NULL.\r
  @retval EFI_UNSUPPORTED       This function does not support writing Register.\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmCpuFeaturesWriteSaveStateRegister (\r
  IN UINTN                        CpuIndex,\r
  IN EFI_SMM_SAVE_STATE_REGISTER  Register,\r
  IN UINTN                        Width,\r
  IN CONST VOID                   *Buffer\r
  )\r
{\r
  return EFI_UNSUPPORTED;\r
}\r