[mirror_edk2.git] / UnixPkg / UnixPkg.fdf

# This is Unix FDF file with UEFI HII features enabled\r
#\r
# Copyright (c) 2008, Intel Corporation\r
#\r
#  All rights reserved. This program and the accompanying materials\r
#    are licensed and made available under the terms and conditions of the BSD License\r
#    which accompanies this distribution. The full text of the license may be found at\r
#    http://opensource.org/licenses/bsd-license.php\r
#\r
#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
[FD.Fv_Recovery]\r
#\r
# In OS X PEIMs are really XIP, so we need to make this address match the malloced \r
# buffer for the FD (0x41000000). If this address does not match the FV will get\r
# relocated in place (works, but not a great idea).\r
#\r
BaseAddress   = 0x41000000|gEfiUnixPkgTokenSpaceGuid.PcdUnixFdBaseAddress   #The base address of the FLASH Device.\r
Size          = 0x002a0000|gEfiUnixPkgTokenSpaceGuid.PcdUnixFirmwareFdSize  #The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x10000\r
NumBlocks     = 0x2a\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
0x00000000|0x00280000\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
FV = FvRecovery\r
\r
0x00280000|0x0000c000\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\r
#NV_VARIABLE_STORE\r
DATA = {\r
  ## This is the EFI_FIRMWARE_VOLUME_HEADER\r
  # ZeroVector []\r
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
  # FileSystemGuid: gEfiSystemNvDataFvGuid         =\r
  #  { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
  0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
  0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
  # FvLength: 0x20000\r
  0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
  # Signature "_FVH"       #Attributes\r
  0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,\r
  # HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision\r
  0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02,\r
  # Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block\r
  0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,\r
  # Blockmap[1]: End\r
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
  ## This is the VARIABLE_STORE_HEADER\r
  #Signature: gEfiVariableGuid =\r
  #  { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
  0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,\r
  0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,\r
  #Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xBFB8\r
  # This can speed up the Variable Dispatch a bit.\r
  0xB8, 0xBF, 0x00, 0x00,\r
  #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32\r
  0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
}\r
\r
0x0028c000|0x00002000\r
#NV_EVENT_LOG\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogSize\r
\r
0x0028e000|0x00002000\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\r
#NV_FTW_WORKING\r
DATA = {\r
  # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid         =\r
  #  { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
  0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
  0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
  # Crc:UINT32            #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved\r
  0x77, 0x13, 0x9B, 0xD7, 0xFE, 0xFF, 0xFF, 0xFF,\r
  # WriteQueueSize: UINT64\r
  0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
}\r
\r
0x00290000|0x00010000\r
#NV_FTW_SPARE\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
[FV.FvRecovery]\r
FvAlignment        = 16         #FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
################################################################################\r
#\r
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
# Parsing tools will scan the INF file to determine the type of component or module.\r
# The component or module type is used to reference the standard rules\r
# defined elsewhere in the FDF file.\r
#\r
# The format for INF statements is:\r
# INF $(PathAndInfFileName)\r
#\r
################################################################################\r
##\r
#  PEI Phase modules\r
##\r
##\r
#  PEI Apriori file example, more PEIM module added later.\r
##\r
APRIORI PEI {\r
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
  }\r
APRIORI DXE {\r
  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
  INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
  INF  UnixPkg/MetronomeDxe/Metronome.inf\r
  }\r
INF  MdeModulePkg/Core/Pei/PeiMain.inf\r
INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
INF  UnixPkg/BootModePei/BootModePei.inf\r
INF  UnixPkg/UnixFlashMapPei/FlashMap.inf\r
INF  UnixPkg/UnixAutoScanPei/UnixAutoScan.inf\r
INF  UnixPkg/UnixFirmwareVolumePei/UnixFwh.inf\r
INF  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
INF  UnixPkg/UnixThunkPpiToProtocolPei/UnixThunkPpiToProtocol.inf\r
INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
##\r
#  DXE Phase modules\r
##\r
INF  MdeModulePkg/Core/Dxe/DxeMain.inf\r
INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
INF  UnixPkg/MetronomeDxe/Metronome.inf\r
INF  UnixPkg/RealTimeClockRuntimeDxe/RealTimeClock.inf\r
INF  UnixPkg/ResetRuntimeDxe/Reset.inf\r
INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
INF  UnixPkg/FvbServicesRuntimeDxe/UnixFwh.inf\r
INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
INF  MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
INF  UnixPkg/UnixThunkDxe/UnixThunk.inf\r
INF  UnixPkg/CpuRuntimeDxe/Cpu.inf\r
INF  MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf\r
INF  UnixPkg/MiscSubClassPlatformDxe/MiscSubClassDriver.inf\r
INF  UnixPkg/TimerDxe/Timer.inf\r
INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
INF  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
INF  UnixPkg/UnixBusDriverDxe/UnixBusDriver.inf\r
 \r
INF  MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
INF  UnixPkg/UnixBlockIoDxe/UnixBlockIo.inf\r
INF  UnixPkg/UnixSerialIoDxe/UnixSerialIo.inf\r
INF  UnixPkg/UnixUgaDxe/UnixUga.inf\r
#INF  UnixPkg/UnixConsoleDxe/UnixConsole.inf\r
INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
INF  MdeModulePkg/Universal/PrintDxe/PrintDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf \r
INF  UnixPkg/UnixSimpleFileSystemDxe/UnixSimpleFileSystem.inf\r
INF  MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf\r
INF  MdeModulePkg/Application/HelloWorld/HelloWorld.inf\r
\r
#\r
# Network stack drivers\r
# To test network drivers, need network Io driver(SnpNt32Io.dll), please refer to NETWORK-IO Subproject.\r
#\r
#INF  MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
#INF  MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
#INF  MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
#INF  MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
#INF  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
#INF  MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
#INF  MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
#INF  MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
#INF  MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
#INF  UnixPkg/SnpUnixDxe/SnpUnixDxe.inf\r
\r
#INF FatPkg/EnhancedFatDxe/Fat.inf\r
\r
\r
   \r
################################################################################\r
#  \r
# FILE statements are provided so that a platform integrator can include\r
# complete EFI FFS files, as well as a method for constructing FFS files\r
# using curly "{}" brace scoping. The following three FILEs are\r
# for binary shell, binary fat and logo module.\r
#  \r
################################################################################\r
FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {\r
    SECTION COMPRESS PI_STD {\r
      SECTION GUIDED {\r
        SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi\r
#        SECTION PE32 =Build/GccShellPkg/DEBUG_XCODE32/IA32/ShellFull.efi\r
      }\r
    }\r
  }\r
\r
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
    SECTION COMPRESS PI_STD {\r
      SECTION GUIDED {\r
        SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi\r
      }\r
    }\r
  }\r
\r
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {\r
    SECTION COMPRESS PI_STD {\r
      SECTION GUIDED {\r
        SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
      }\r
    }\r
  }\r
   \r
   \r
################################################################################\r
#  \r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#  \r
################################################################################\r
   \r
   \r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # \r
############################################################################\r
#  \r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    |.efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    PE32     PE32    Align=32       |.efi\r
    UI       STRING ="$(MODULE_NAME)" Optional         \r
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)    \r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional        |.depex\r
     PE32      PE32   Align=32       |.efi\r
     UI       STRING="$(MODULE_NAME)" Optional         \r
     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)   \r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) {\r
    PEI_DEPEX PEI_DEPEX Optional         |.depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                     |.efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
      VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    COMPRESS PI_STD {\r
      PE32     PE32           |.efi\r
      UI       STRING="$(MODULE_NAME)" Optional\r
      VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
    }\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    COMPRESS PI_STD {\r
      GUIDED {\r
        PE32     PE32                    |.efi\r
        UI       STRING="$(MODULE_NAME)" Optional\r
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
      }\r
    }\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    COMPRESS PI_STD {\r
      GUIDED {\r
        PE32     PE32                    |.efi\r
        UI       STRING="$(MODULE_NAME)" Optional\r
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
      }\r
    }\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    COMPRESS PI_STD {\r
      GUIDED {\r
        PE32     PE32                    |.efi\r
        UI       STRING="$(MODULE_NAME)" Optional\r
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
      }\r
    }\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    COMPRESS PI_STD {\r
      GUIDED {\r
        PE32     PE32                    |.efi\r
        UI       STRING="$(MODULE_NAME)" Optional\r
        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
      }\r
    }\r
  }\r
Commit	Line	Data
804405e7	1	# This is Unix FDF file with UEFI HII features enabled\r
	2	#\r
	3	# Copyright (c) 2008, Intel Corporation\r
	4	#\r
	5	# All rights reserved. This program and the accompanying materials\r
	6	# are licensed and made available under the terms and conditions of the BSD License\r
	7	# which accompanies this distribution. The full text of the license may be found at\r
	8	# http://opensource.org/licenses/bsd-license.php\r
	9	#\r
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	12	#\r
	13	\r
	14	################################################################################\r
	15	#\r
	16	# FD Section\r
	17	# The [FD] Section is made up of the definition statements and a\r
	18	# description of what goes into the Flash Device Image. Each FD section\r
	19	# defines one flash "device" image. A flash device image may be one of\r
	20	# the following: Removable media bootable image (like a boot floppy\r
	21	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	22	# card,) a System "Flash" image (that would be burned into a system's\r
	23	# flash) or an Update ("Capsule") image that will be used to update and\r
	24	# existing system flash.\r
	25	#\r
	26	################################################################################\r
	27	[FD.Fv_Recovery]\r
7ee3b613 A	28	#\r
	29	# In OS X PEIMs are really XIP, so we need to make this address match the malloced \r
	30	# buffer for the FD (0x41000000). If this address does not match the FV will get\r
	31	# relocated in place (works, but not a great idea).\r
	32	#\r
	33	BaseAddress = 0x41000000\|gEfiUnixPkgTokenSpaceGuid.PcdUnixFdBaseAddress #The base address of the FLASH Device.\r
	34	Size = 0x002a0000\|gEfiUnixPkgTokenSpaceGuid.PcdUnixFirmwareFdSize #The size in bytes of the FLASH Device\r
804405e7	35	ErasePolarity = 1\r
	36	BlockSize = 0x10000\r
	37	NumBlocks = 0x2a\r
	38	\r
	39	################################################################################\r
	40	#\r
	41	# Following are lists of FD Region layout which correspond to the locations of different\r
	42	# images within the flash device.\r
	43	#\r
	44	# Regions must be defined in ascending order and may not overlap.\r
	45	#\r
	46	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	47	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	48	# "0x" characters. Like:\r
	49	# Offset\|Size\r
	50	# PcdOffsetCName\|PcdSizeCName\r
	51	# RegionType <FV, DATA, or FILE>\r
	52	#\r
	53	################################################################################\r
	54	0x00000000\|0x00280000\r
	55	gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase\|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
	56	FV = FvRecovery\r
	57	\r
	58	0x00280000\|0x0000c000\r
	59	gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageVariableBase\|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\r
	60	#NV_VARIABLE_STORE\r
	61	DATA = {\r
	62	## This is the EFI_FIRMWARE_VOLUME_HEADER\r
	63	# ZeroVector []\r
	64	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
	65	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
	66	# FileSystemGuid: gEfiSystemNvDataFvGuid =\r
	67	# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
	68	0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
	69	0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
	70	# FvLength: 0x20000\r
	71	0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
	72	# Signature "_FVH" #Attributes\r
	73	0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,\r
	74	# HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision\r
	75	0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02,\r
	76	# Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block\r
	77	0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,\r
	78	# Blockmap[1]: End\r
	79	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
	80	## This is the VARIABLE_STORE_HEADER\r
3709c4cd	81	#Signature: gEfiVariableGuid =\r
	82	# { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
	83	0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,\r
	84	0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,\r
	85	#Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xBFB8\r
	86	# This can speed up the Variable Dispatch a bit.\r
	87	0xB8, 0xBF, 0x00, 0x00,\r
804405e7	88	#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32\r
	89	0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
	90	}\r
	91	\r
	92	0x0028c000\|0x00002000\r
	93	#NV_EVENT_LOG\r
	94	gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogBase\|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogSize\r
	95	\r
	96	0x0028e000\|0x00002000\r
	97	gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwWorkingBase\|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\r
	98	#NV_FTW_WORKING\r
	99	DATA = {\r
	100	# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid =\r
	101	# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
	102	0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
	103	0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
	104	# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved\r
c84588fd	105	0x77, 0x13, 0x9B, 0xD7, 0xFE, 0xFF, 0xFF, 0xFF,\r
	106	# WriteQueueSize: UINT64\r
	107	0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
804405e7	108	}\r
	109	\r
	110	0x00290000\|0x00010000\r
	111	#NV_FTW_SPARE\r
	112	gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwSpareBase\|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\r
	113	\r
	114	################################################################################\r
	115	#\r
	116	# FV Section\r
	117	#\r
	118	# [FV] section is used to define what components or modules are placed within a flash\r
	119	# device file. This section also defines order the components and modules are positioned\r
	120	# within the image. The [FV] section consists of define statements, set statements and\r
	121	# module statements.\r
	122	#\r
	123	################################################################################\r
	124	[FV.FvRecovery]\r
	125	FvAlignment = 16 #FV alignment and FV attributes setting.\r
	126	ERASE_POLARITY = 1\r
	127	MEMORY_MAPPED = TRUE\r
	128	STICKY_WRITE = TRUE\r
	129	LOCK_CAP = TRUE\r
	130	LOCK_STATUS = TRUE\r
	131	WRITE_DISABLED_CAP = TRUE\r
	132	WRITE_ENABLED_CAP = TRUE\r
	133	WRITE_STATUS = TRUE\r
	134	WRITE_LOCK_CAP = TRUE\r
	135	WRITE_LOCK_STATUS = TRUE\r
	136	READ_DISABLED_CAP = TRUE\r
	137	READ_ENABLED_CAP = TRUE\r
	138	READ_STATUS = TRUE\r
	139	READ_LOCK_CAP = TRUE\r
	140	READ_LOCK_STATUS = TRUE\r
	141	\r
	142	################################################################################\r
	143	#\r
	144	# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
	145	# Parsing tools will scan the INF file to determine the type of component or module.\r
	146	# The component or module type is used to reference the standard rules\r
	147	# defined elsewhere in the FDF file.\r
	148	#\r
	149	# The format for INF statements is:\r
	150	# INF $(PathAndInfFileName)\r
	151	#\r
	152	################################################################################\r
	153	##\r
	154	# PEI Phase modules\r
	155	##\r
	156	##\r
	157	# PEI Apriori file example, more PEIM module added later.\r
	158	##\r
	159	APRIORI PEI {\r
	160	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
02994038	161	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
804405e7	162	}\r
804405e7	163	APRIORI DXE {\r
804405e7	164	INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
ecd8990a	165	INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
804405e7	166	INF UnixPkg/MetronomeDxe/Metronome.inf\r
	167	}\r
	168	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
	169	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
02994038	170	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
804405e7	171	INF UnixPkg/BootModePei/BootModePei.inf\r
804405e7	172	INF UnixPkg/UnixFlashMapPei/FlashMap.inf\r
804405e7	173	INF UnixPkg/UnixAutoScanPei/UnixAutoScan.inf\r
	174	INF UnixPkg/UnixFirmwareVolumePei/UnixFwh.inf\r
	175	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
	176	INF UnixPkg/UnixThunkPpiToProtocolPei/UnixThunkPpiToProtocol.inf\r
	177	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
	178	\r
	179	##\r
	180	# DXE Phase modules\r
	181	##\r
	182	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
ecd8990a	183	INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
804405e7	184	INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
	185	INF UnixPkg/MetronomeDxe/Metronome.inf\r
	186	INF UnixPkg/RealTimeClockRuntimeDxe/RealTimeClock.inf\r
	187	INF UnixPkg/ResetRuntimeDxe/Reset.inf\r
	188	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
	189	INF UnixPkg/FvbServicesRuntimeDxe/UnixFwh.inf\r
	190	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
	191	INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
	192	INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
	193	INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
	194	INF UnixPkg/UnixThunkDxe/UnixThunk.inf\r
	195	INF UnixPkg/CpuRuntimeDxe/Cpu.inf\r
7ee40c6e	196	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
804405e7	197	INF IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf\r
	198	INF UnixPkg/MiscSubClassPlatformDxe/MiscSubClassDriver.inf\r
	199	INF UnixPkg/TimerDxe/Timer.inf\r
	200	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
	201	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
	202	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
	203	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
	204	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
	205	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
	206	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
	207	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
	208	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	209	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	210	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
	211	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
beb9b900	212	INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
804405e7	213	INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
	214	INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
	215	INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
	216	INF UnixPkg/UnixBusDriverDxe/UnixBusDriver.inf\r
	217	\r
aaa2cc19	218	INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
804405e7	219	INF UnixPkg/UnixBlockIoDxe/UnixBlockIo.inf\r
	220	INF UnixPkg/UnixSerialIoDxe/UnixSerialIo.inf\r
	221	INF UnixPkg/UnixUgaDxe/UnixUga.inf\r
288a3c98	222	#INF UnixPkg/UnixConsoleDxe/UnixConsole.inf\r
804405e7	223	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
c71b6597	224	INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
c71b6597	225	INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf\r
5d1a5b35	226	INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf \r
804405e7	227	INF UnixPkg/UnixSimpleFileSystemDxe/UnixSimpleFileSystem.inf\r
	228	INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf\r
	229	INF MdeModulePkg/Application/HelloWorld/HelloWorld.inf\r
	230	\r
	231	#\r
	232	# Network stack drivers\r
	233	# To test network drivers, need network Io driver(SnpNt32Io.dll), please refer to NETWORK-IO Subproject.\r
	234	#\r
	235	#INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
	236	#INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
	237	#INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
	238	#INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
	239	#INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
	240	#INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
	241	#INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
	242	#INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
	243	#INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
	244	#INF UnixPkg/SnpUnixDxe/SnpUnixDxe.inf\r
	245	\r
3b66da94	246	#INF FatPkg/EnhancedFatDxe/Fat.inf\r
3b66da94	247	\r
804405e7	248	\r
	249	\r
	250	################################################################################\r
	251	# \r
	252	# FILE statements are provided so that a platform integrator can include\r
	253	# complete EFI FFS files, as well as a method for constructing FFS files\r
	254	# using curly "{}" brace scoping. The following three FILEs are\r
	255	# for binary shell, binary fat and logo module.\r
	256	# \r
	257	################################################################################\r
d46f3632	258	FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {\r
804405e7	259	SECTION COMPRESS PI_STD {\r
804405e7	260	SECTION GUIDED {\r
15369259	261	SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi\r
3b66da94	262	# SECTION PE32 =Build/GccShellPkg/DEBUG_XCODE32/IA32/ShellFull.efi\r
804405e7	263	}\r
	264	}\r
	265	}\r
d46f3632	266	\r
804405e7	267	FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
	268	SECTION COMPRESS PI_STD {\r
	269	SECTION GUIDED {\r
	270	SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi\r
	271	}\r
	272	}\r
	273	}\r
d46f3632 LG	274	\r
d46f3632 LG	275	FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {\r
804405e7	276	SECTION COMPRESS PI_STD {\r
	277	SECTION GUIDED {\r
	278	SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
	279	}\r
	280	}\r
	281	}\r
	282	\r
	283	\r
	284	################################################################################\r
	285	# \r
	286	# Rules are use with the [FV] section's module INF type to define\r
	287	# how an FFS file is created for a given INF file. The following Rule are the default\r
	288	# rules for the different module type. User can add the customized rules to define the\r
	289	# content of the FFS file.\r
	290	# \r
	291	################################################################################\r
	292	\r
	293	\r
	294	############################################################################\r
	295	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
	296	############################################################################\r
	297	# \r
	298	#[Rule.Common.DXE_DRIVER]\r
	299	# FILE DRIVER = $(NAMED_GUID) {\r
	300	# DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	301	# COMPRESS PI_STD {\r
	302	# GUIDED {\r
	303	# PE32 PE32 \|.efi\r
	304	# UI STRING="$(MODULE_NAME)" Optional\r
	305	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	306	# }\r
	307	# }\r
	308	# }\r
	309	#\r
	310	############################################################################\r
	311	\r
	312	[Rule.Common.PEI_CORE]\r
	313	FILE PEI_CORE = $(NAMED_GUID) {\r
60975752	314	PE32 PE32 Align=32 \|.efi\r
804405e7	315	UI STRING ="$(MODULE_NAME)" Optional \r
	316	VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) \r
	317	}\r
	318	\r
	319	[Rule.Common.PEIM]\r
	320	FILE PEIM = $(NAMED_GUID) {\r
	321	PEI_DEPEX PEI_DEPEX Optional \|.depex\r
60975752	322	PE32 PE32 Align=32 \|.efi\r
804405e7	323	UI STRING="$(MODULE_NAME)" Optional \r
	324	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) \r
	325	}\r
	326	\r
	327	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
a6be5d45	328	FILE PEIM = $(NAMED_GUID) {\r
804405e7	329	PEI_DEPEX PEI_DEPEX Optional \|.depex\r
	330	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
	331	PE32 PE32 \|.efi\r
	332	UI STRING="$(MODULE_NAME)" Optional\r
	333	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	334	}\r
	335	}\r
	336	\r
	337	[Rule.Common.DXE_CORE]\r
	338	FILE DXE_CORE = $(NAMED_GUID) {\r
	339	COMPRESS PI_STD {\r
	340	PE32 PE32 \|.efi\r
	341	UI STRING="$(MODULE_NAME)" Optional\r
	342	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	343	}\r
	344	}\r
	345	\r
	346	[Rule.Common.UEFI_DRIVER]\r
	347	FILE DRIVER = $(NAMED_GUID) {\r
	348	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	349	COMPRESS PI_STD {\r
	350	GUIDED {\r
	351	PE32 PE32 \|.efi\r
	352	UI STRING="$(MODULE_NAME)" Optional\r
	353	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	354	}\r
	355	}\r
	356	}\r
	357	\r
	358	[Rule.Common.DXE_DRIVER]\r
	359	FILE DRIVER = $(NAMED_GUID) {\r
	360	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	361	COMPRESS PI_STD {\r
	362	GUIDED {\r
	363	PE32 PE32 \|.efi\r
	364	UI STRING="$(MODULE_NAME)" Optional\r
	365	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	366	}\r
	367	}\r
	368	}\r
	369	\r
	370	[Rule.Common.DXE_RUNTIME_DRIVER]\r
	371	FILE DRIVER = $(NAMED_GUID) {\r
	372	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	373	COMPRESS PI_STD {\r
	374	GUIDED {\r
	375	PE32 PE32 \|.efi\r
	376	UI STRING="$(MODULE_NAME)" Optional\r
	377	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	378	}\r
	379	}\r
	380	}\r
	381	\r
	382	[Rule.Common.UEFI_APPLICATION]\r
	383	FILE APPLICATION = $(NAMED_GUID) {\r
	384	COMPRESS PI_STD {\r
	385	GUIDED {\r
	386	PE32 PE32 \|.efi\r
	387	UI STRING="$(MODULE_NAME)" Optional\r
	388	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	389	}\r
	390	}\r
	391	}\r