projects / mirror_edk2.git / blame
| Commit | Line | Data |
|---|---|---|
| 3cbfba02 DW |
1 | /*++\r |
| 2 | \r | |
| 3 | Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved\r | |
| 4 | \r | |
| 7ede8060 | 5 | SPDX-License-Identifier: BSD-2-Clause-Patent\r |
| 3cbfba02 DW |
6 | \r |
| 7 | \r | |
| 8 | \r | |
| 9 | Module Name:\r | |
| 10 | \r | |
| 11 | PchRegsPcu.h\r | |
| 12 | \r | |
| 13 | Abstract:\r | |
| 14 | \r | |
| 15 | Register names for VLV PCU device.\r | |
| 16 | \r | |
| 17 | Conventions:\r | |
| 18 | \r | |
| 19 | - Prefixes:\r | |
| 20 | Definitions beginning with "R_" are registers\r | |
| 21 | Definitions beginning with "B_" are bits within registers\r | |
| 22 | Definitions beginning with "V_" are meaningful values of bits within the registers\r | |
| 23 | Definitions beginning with "S_" are register sizes\r | |
| 24 | Definitions beginning with "N_" are the bit position\r | |
| 25 | - In general, PCH registers are denoted by "_PCH_" in register names\r | |
| 26 | - Registers / bits that are different between PCH generations are denoted by\r | |
| 27 | "_PCH_<generation_name>_" in register/bit names. e.g., "_PCH_VLV_"\r | |
| 28 | - Registers / bits that are different between SKUs are denoted by "_<SKU_name>"\r | |
| 29 | at the end of the register/bit names\r | |
| 30 | - Registers / bits of new devices introduced in a PCH generation will be just named\r | |
| 31 | as "_PCH_" without <generation_name> inserted.\r | |
| 32 | \r | |
| 33 | --*/\r | |
| 34 | #ifndef _PCH_REGS_LPC_H_\r | |
| 35 | #define _PCH_REGS_LPC_H_\r | |
| 36 | \r | |
| 37 | //\r | |
| 38 | // VLV PCU Registers (D31:F0)\r | |
| 39 | //\r | |
| 40 | #define PCI_DEVICE_NUMBER_PCH_LPC 31\r | |
| 41 | #define PCI_FUNCTION_NUMBER_PCH_LPC 0\r | |
| 42 | \r | |
| 43 | // Silicon Steppings\r | |
| 44 | typedef enum {\r | |
| 45 | PchA0 = 0,\r | |
| 46 | PchA1 = 1,\r | |
| 47 | PchB0 = 2,\r | |
| 48 | PchB1 = 3,\r | |
| 49 | PchB2 = 4,\r | |
| 50 | PchB3 = 5,\r | |
| 51 | PchC0 = 6,\r | |
| 52 | PchD0 = 7,\r | |
| 53 | PchSteppingMax\r | |
| 54 | } PCH_STEPPING;\r | |
| 55 | \r | |
| 56 | #define R_PCH_LPC_REG_ID 0x00 // Identifiers Register\r | |
| 57 | #define B_PCH_LPC_DEVICE_ID 0xFFFF0000 // Device Identification\r | |
| 58 | #define B_PCH_LPC_VENDOR_ID 0x0000FFFF // Vendor Identification\r | |
| 59 | #define V_PCH_LPC_VENDOR_ID V_PCH_INTEL_VENDOR_ID // Vendor ID for Intel\r | |
| 60 | //\r | |
| 61 | // General VLV PCU Device ID\r | |
| 62 | //\r | |
| 63 | #define V_PCH_LPC_DEVICE_ID_0 0x0F1C\r | |
| 64 | #define V_PCH_LPC_DEVICE_ID_1 0x0F1D\r | |
| 65 | #define V_PCH_LPC_DEVICE_ID_2 0x0F1E\r | |
| 66 | #define V_PCH_LPC_DEVICE_ID_3 0x0F1F\r | |
| 67 | \r | |
| 68 | #define R_PCH_LPC_COMMAND 0x04 // Command\r | |
| 69 | #define B_PCH_LPC_COMMAND_ID BIT10 // Interrupt Disable\r | |
| 70 | #define B_PCH_LPC_COMMAND_FBE BIT9 // Fast Back to Back Enable\r | |
| 71 | #define B_PCH_LPC_COMMAND_SERR_EN BIT8 // SERR# Enable\r | |
| 72 | #define B_PCH_LPC_COMMAND_WCC BIT7 // Wait Cycle Control\r | |
| 73 | #define B_PCH_LPC_COMMAND_PER BIT6 // Parity Error Response Enable\r | |
| 74 | #define B_PCH_LPC_COMMAND_VPS BIT5 // VGA Palette Snoop\r | |
| 75 | #define B_PCH_LPC_COMMAND_MWIE BIT4 // Memory Write and Invalidate Enable\r | |
| 76 | #define B_PCH_LPC_COMMAND_SCE BIT3 // Special Cycle Enable\r | |
| 77 | #define B_PCH_LPC_COMMAND_BME BIT2 // Bus Master Enable\r | |
| 78 | #define B_PCH_LPC_COMMAND_MSE BIT1 // Memory Space Enable\r | |
| 79 | #define B_PCH_LPC_COMMAND_IOSE BIT0 // I/O Space Enable\r | |
| 80 | \r | |
| 81 | #define R_PCH_LPC_DEV_STS 0x06 // Status\r | |
| 82 | #define B_PCH_LPC_DEV_STS_DPE BIT15 // Detected Parity Error\r | |
| 83 | #define B_PCH_LPC_DEV_STS_SSE BIT14 // Signaled System Error\r | |
| 84 | #define B_PCH_LPC_DEV_STS_RMA BIT13 // Received Master Abort\r | |
| 85 | #define B_PCH_LPC_DEV_STS_RTA BIT12 // Received Target Abort\r | |
| 86 | #define B_PCH_LPC_DEV_STS_STA BIT11 // Signaled Target Abort\r | |
| 87 | #define B_PCH_LPC_DEV_STS_DEVT_STS (BIT10 | BIT9) // DEVSEL# Timing Status\r | |
| 88 | #define B_PCH_LPC_DEV_STS_MDPED BIT8 // Data Parity Error\r | |
| 89 | #define B_PCH_LPC_DEV_STS_FB2B BIT7 // Fast Back to Back Capable\r | |
| 90 | #define B_PCH_LPC_DEV_STS_66MHZ_CAP BIT5 // 66 MHz capable\r | |
| 91 | #define B_PCH_LPC_DEV_STS_CAP_LIST BIT4 // Capabilities List\r | |
| 92 | #define B_PCH_LPC_DEV_STS_INT_STS BIT3 // Interrupt Status\r | |
| 93 | \r | |
| 94 | #define R_PCH_LPC_RID_CC 0x08 // Revision ID & Class Code\r | |
| 95 | #define B_PCH_LPC_RID_CC_BCC 0xFF000000 // Base Class Code\r | |
| 96 | #define B_PCH_LPC_RID_CC_SCC 0x00FF0000 // Sub-Class Code\r | |
| 97 | #define B_PCH_LPC_RID_CC_PI 0x0000FF00 // Programming Interface\r | |
| 98 | #define B_PCH_LPC_RID_CC_RID 0x000000FF // Revision ID\r | |
| 99 | \r | |
| 100 | // Silicon Steppings\r | |
| 101 | \r | |
| 102 | #define V_PCH_LPC_RID_0 0x01 // A0 Stepping (17 x 17)\r | |
| 103 | #define V_PCH_LPC_RID_1 0x02 // A0 Stepping (25 x 27)\r | |
| 104 | #define V_PCH_LPC_RID_2 0x03 // A1 Stepping (17 x 17)\r | |
| 105 | #define V_PCH_LPC_RID_3 0x04 // A1 Stepping (25 x 27)\r | |
| 106 | #define V_PCH_LPC_RID_4 0x05 // B0 Stepping (17 x 17)\r | |
| 107 | #define V_PCH_LPC_RID_5 0x06 // B0 Stepping (25 x 27)\r | |
| 108 | #define V_PCH_LPC_RID_6 0x07 // B1 Stepping (17 x 17)\r | |
| 109 | #define V_PCH_LPC_RID_7 0x08 // B1 Stepping (25 x 27)\r | |
| 110 | #define V_PCH_LPC_RID_8 0x09 // B2 Stepping (17 x 17)\r | |
| 111 | #define V_PCH_LPC_RID_9 0x0A // B2 Stepping (25 x 27)\r | |
| 112 | #define V_PCH_LPC_RID_A 0x0B // B3 Stepping (17 x 17)\r | |
| 113 | #define V_PCH_LPC_RID_B 0x0C // B3 Stepping (25 x 27)\r | |
| 114 | #define V_PCH_LPC_RID_C 0x0D // C0 Stepping (17 x 17)\r | |
| 115 | #define V_PCH_LPC_RID_D 0x0E // C0 Stepping (25 x 27)\r | |
| 8268a01d SL |
116 | #define V_PCH_LPC_RID_E 0x10 // D0 Stepping (17 x 17)\r |
| 117 | #define V_PCH_LPC_RID_F 0x11 // D0 Stepping (25 x 27)\r | |
| 3cbfba02 DW |
118 | \r |
| 119 | #define R_PCH_LPC_MLT 0x0D // Master Latency Timer\r | |
| 120 | #define B_PCH_LPC_MLT_MLC 0xF8 // Master Latency Count\r | |
| 121 | \r | |
| 122 | #define R_PCH_LPC_HEADTYP 0x0E // Header Type\r | |
| 123 | #define B_PCH_LPC_HEADTYP_MFD BIT7 // Multi-function Device\r | |
| 124 | #define B_PCH_LPC_HEADTYP_HT 0x7F // Header Type\r | |
| 125 | \r | |
| 126 | #define R_PCH_LPC_SS 0x2C // Subsystem ID & Vendor ID\r | |
| 127 | #define B_PCH_LPC_SS_SSID 0xFFFF0000 // Subsystem ID\r | |
| 128 | #define B_PCH_LPC_SS_SSVID 0x0000FFFF // Subsystem Vendor ID\r | |
| 129 | \r | |
| 130 | #define R_PCH_LPC_CAP_LIST 0x34 // Capability List\r | |
| 131 | #define B_PCH_LPC_CAP_LIST_CP 0xFF // Capability Pointer\r | |
| 132 | \r | |
| 133 | #define R_PCH_LPC_ACPI_BASE 0x40 // ABASE, 16bit\r | |
| 134 | #define B_PCH_LPC_ACPI_BASE_BAR 0x0000FF80 // Base Address, 128 Bytes\r | |
| 135 | #define B_PCH_LPC_ACPI_BASE_EN BIT1 // Enable Bit\r | |
| 136 | #define B_PCH_LPC_ACPI_BASE_MEMI BIT0 // Memory Space Indication\r | |
| 137 | \r | |
| 138 | #define R_PCH_LPC_PMC_BASE 0x44 // PBASE, 32bit, 512 Bytes\r | |
| 139 | #define B_PCH_LPC_PMC_BASE_BAR 0xFFFFFE00 // Base Address\r | |
| 140 | #define B_PCH_LPC_PMC_BASE_PREF BIT3 // Prefetchable\r | |
| 141 | #define B_PCH_LPC_PMC_BASE_ADDRNG BIT2 // Address Range\r | |
| 142 | #define B_PCH_LPC_PMC_BASE_EN BIT1 // Enable Bit\r | |
| 143 | #define B_PCH_LPC_PMC_BASE_MEMI BIT0 // Memory Space Indication\r | |
| 144 | \r | |
| 145 | #define R_PCH_LPC_GPIO_BASE 0x48 // GBASE, 16bit\r | |
| 146 | #define B_PCH_LPC_GPIO_BASE_BAR 0xFF00 // Base Address, 256 Bytes\r | |
| 147 | #define B_PCH_LPC_GPIO_BASE_EN BIT1 // Enable Bit\r | |
| 148 | #define B_PCH_LPC_GPIO_BASE_MEMI BIT0 // Memory Space Indication\r | |
| 149 | \r | |
| 150 | #define R_PCH_LPC_IO_BASE 0x4C // IOBASE, 32bit\r | |
| 151 | #define B_PCH_LPC_IO_BASE_BAR 0xFFFFC000 // Base Address, 16 KiloBytes\r | |
| 152 | #define B_PCH_LPC_IO_BASE_PREF BIT3 // Prefetchable\r | |
| 153 | #define B_PCH_LPC_IO_BASE_ADDRNG BIT2 // Address Range\r | |
| 154 | #define B_PCH_LPC_IO_BASE_EN BIT1 // Enable Bit\r | |
| 155 | #define B_PCH_LPC_IO_BASE_MEMI BIT0 // Memory Space Indication\r | |
| 156 | \r | |
| 157 | #define R_PCH_LPC_ILB_BASE 0x50 // IBASE, 32bit\r | |
| 158 | #define B_PCH_LPC_ILB_BASE_BAR 0xFFFFFE00 // Base Address, 512 bytes\r | |
| 159 | #define B_PCH_LPC_ILB_BASE_PREF BIT3 // Prefetchable\r | |
| 160 | #define B_PCH_LPC_ILB_BASE_ADDRNG BIT2 // Address Range\r | |
| 161 | #define B_PCH_LPC_ILB_BASE_EN BIT1 // Enable Bit\r | |
| 162 | #define B_PCH_LPC_ILB_BASE_MEMI BIT0 // Memory Space Indication\r | |
| 163 | \r | |
| 164 | #define R_PCH_LPC_SPI_BASE 0x54 // SBASE, 32bit\r | |
| 165 | #define B_PCH_LPC_SPI_BASE_BAR 0xFFFFFE00 // Base Address, 512 bytes\r | |
| 166 | #define B_PCH_LPC_SPI_BASE_PREF BIT3 // Prefetchable\r | |
| 167 | #define B_PCH_LPC_SPI_BASE_ADDRNG BIT2 // Address Range\r | |
| 168 | #define B_PCH_LPC_SPI_BASE_EN BIT1 // Enable Bit\r | |
| 169 | #define B_PCH_LPC_SPI_BASE_MEMI BIT0 // Memory Space Indicator\r | |
| 170 | \r | |
| 171 | #define R_PCH_LPC_MPHY_BASE 0x58 // MPBASE, 32bit\r | |
| 172 | #define B_PCH_LPC_MPHY_BASE_BAR 0xFFF00000 // Base Address, 1 MegaByte\r | |
| 173 | #define B_PCH_LPC_MPHY_BASE_PREF BIT3 // Prefetchable\r | |
| 174 | #define B_PCH_LPC_MPHY_BASE_ADDRNG BIT2 // Address Range\r | |
| 175 | #define B_PCH_LPC_MPHY_BASE_EN BIT1 // Enable Bit\r | |
| 176 | #define B_PCH_LPC_MPHY_BASE_MEMI BIT0 // Memory Space Indicator\r | |
| 177 | \r | |
| 178 | #define R_PCH_LPC_PUNIT_BASE 0x5C // PUBASE, 32bit\r | |
| 179 | #define B_PCH_LPC_PUNIT_BASE_BAR 0xFFFFF800 // Base Address, 2K bytes\r | |
| 180 | #define B_PCH_LPC_PUNIT_BASE_PREF BIT3 // Prefetchable\r | |
| 181 | #define B_PCH_LPC_PUNIT_BASE_ADDRNG BIT2 // Address Range\r | |
| 182 | #define B_PCH_LPC_PUNIT_BASE_EN BIT1 // Enable Bit\r | |
| 183 | #define B_PCH_LPC_PUNIT_BASE_MEMI BIT0 // Memory Space Indicator\r | |
| 184 | \r | |
| 185 | #define R_PCH_LPC_UART_CTRL 0x80 // UART Control\r | |
| 186 | #define B_PCH_LPC_UART_CTRL_COM1_EN BIT0 // COM1 Enable\r | |
| 187 | \r | |
| 188 | #define R_PCH_LPC_FWH_BIOS_DEC 0xD8 // BIOS Decode Enable\r | |
| 189 | #define B_PCH_LPC_FWH_BIOS_DEC_EF8 BIT15 // F8-FF Enable\r | |
| 190 | #define B_PCH_LPC_FWH_BIOS_DEC_EF0 BIT14 // F0-F8 Enable\r | |
| 191 | #define B_PCH_LPC_FWH_BIOS_DEC_EE8 BIT13 // E8-EF Enable\r | |
| 192 | #define B_PCH_LPC_FWH_BIOS_DEC_EE0 BIT12 // E0-E8 Enable\r | |
| 193 | #define B_PCH_LPC_FWH_BIOS_DEC_ED8 BIT11 // D8-DF Enable\r | |
| 194 | #define B_PCH_LPC_FWH_BIOS_DEC_ED0 BIT10 // D0-D8 Enable\r | |
| 195 | #define B_PCH_LPC_FWH_BIOS_DEC_EC8 BIT9 // C8-CF Enable\r | |
| 196 | #define B_PCH_LPC_FWH_BIOS_DEC_EC0 BIT8 // C0-C8 Enable\r | |
| 197 | #define B_PCH_LPC_FWH_BIOS_DEC_LFE BIT7 // Legacy F Segment Enable\r | |
| 198 | #define B_PCH_LPC_FWH_BIOS_DEC_LEE BIT6 // Legacy E Segment Enable\r | |
| 199 | #define B_PCH_LPC_FWH_BIOS_DEC_E70 BIT3 // 70-7F Enable\r | |
| 200 | #define B_PCH_LPC_FWH_BIOS_DEC_E60 BIT2 // 60-6F Enable\r | |
| 201 | #define B_PCH_LPC_FWH_BIOS_DEC_E50 BIT1 // 50-5F Enable\r | |
| 202 | #define B_PCH_LPC_FWH_BIOS_DEC_E40 BIT0 // 40-4F Enable\r | |
| 203 | \r | |
| 204 | #define R_PCH_LPC_FDCAP 0xE0 // Feature Detection Capability ID\r | |
| 205 | #define B_PCH_LPC_FDCAP_NEXT 0xFF00 // Next Capability\r | |
| 206 | #define B_PCH_LPC_FDCAP_CAPID 0x00FF // Capability ID\r | |
| 207 | \r | |
| 208 | #define R_PCH_LPC_FDLEN 0xE2 // Feature Detection Capability Length\r | |
| 209 | #define B_PCH_LPC_FDLEN_CAPLEN 0xFF // Capability Length\r | |
| 210 | \r | |
| 211 | #define R_PCH_LPC_FDVER 0xE3 // Feature Detection Capability Version\r | |
| 212 | #define B_PCH_LPC_FDVER_VSCID 0xF0 // Vendor Specific Capability ID\r | |
| 213 | #define B_PCH_LPC_FDVER_CAPVER 0x0F // Capability Version\r | |
| 214 | \r | |
| 215 | #define R_PCH_LPC_FVECTIDX 0xE4 // Feature Vector Index\r | |
| 216 | \r | |
| 217 | #define R_PCH_LPC_FVECTD 0xE8 // Feature Vector Data\r | |
| 218 | \r | |
| 219 | #define R_PCH_LPC_RCBA 0xF0 // RCBA, 32bit\r | |
| 220 | #define B_PCH_LPC_RCBA_BAR 0xFFFFFC00 // Base Address, 1 KiloByte\r | |
| 221 | #define B_PCH_LPC_RCBA_EN BIT0 // Enable Bit\r | |
| 222 | \r | |
| 223 | #define R_PCH_LPC_ULT_OBS 0xF4 // ULT Observability\r | |
| 224 | #define B_PCH_LPC_ULT_OBS_WNUM 0x3FF000 // Reserved Wafer Number\r | |
| 225 | #define B_PCH_LPC_ULT_OBS_XLOC 0xFC0 // Reserved X Loc\r | |
| 226 | #define B_PCH_LPC_ULT_OBS_YLOC 0x3F // Reserved Y Loc\r | |
| 227 | \r | |
| 228 | #define R_PCH_LPC_MAN_ID 0xF8 // Manufacturer ID\r | |
| 229 | #define B_PCH_LPC_MAN_ID_DPID 0xF000000 // Dot Portion of Process ID\r | |
| 230 | #define B_PCH_LPC_MAN_ID_MSID 0xFF0000 // Manufacturing Stepping Identifier\r | |
| 231 | #define B_PCH_LPC_MAN_ID_MID 0xFF00 // Manufacturing Identifier\r | |
| 232 | #define B_PCH_LPC_MAN_ID_PPID 0xFF // Process Portion of Process ID\r | |
| 233 | \r | |
| 234 | #define R_PCH_LPC_CGC 0xFC // Clock Gating Control\r | |
| 235 | #define B_PCH_LPC_CGC_SBLCG BIT9 // IOSF-SB Local Clock Gating Disable\r | |
| 236 | #define B_PCH_LPC_CGC_SBTCG BIT8 // IOSF-SB Trunk Clock Gating (Request) Disable\r | |
| 237 | #define B_PCH_LPC_CGC_PRILCG BIT1 // IOSF-PRI Local Clock Gating Disable\r | |
| 238 | #define B_PCH_LPC_CGC_PRITCG BIT0 // IOSF-PRI Trunk Clock Gating (Request) Disable\r | |
| 239 | \r | |
| 240 | //\r | |
| 241 | // iLB Memory Space Registers (IBASE)\r | |
| 242 | //\r | |
| 243 | #define R_PCH_ILB_ACPI_CNT 0x00 // ACPI Control\r | |
| 244 | #define B_PCH_ILB_ACPI_CNT_SCI_IRQ_SEL (BIT2 | BIT1 | BIT0) // SCI IRQ Select\r | |
| 245 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_9 0 // IRQ9\r | |
| 246 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_10 BIT0 // IRQ10\r | |
| 247 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_11 BIT1 // IRQ11\r | |
| 248 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_20 BIT2 // IRQ20 (Only if APIC enabled)\r | |
| 249 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_21 (BIT2 | BIT0) // IRQ21 (Only if APIC enabled)\r | |
| 250 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_22 (BIT2 | BIT1) // IRQ22 (Only if APIC enabled)\r | |
| 251 | #define V_PCH_ILB_ACPI_CNT_SCI_IRQ_23 (BIT2 | BIT1 | BIT0) // IRQ23 (Only if APIC enabled)\r | |
| 252 | \r | |
| 253 | #define R_PCH_ILB_MC 0x04 // Miscellaneous Control\r | |
| 254 | #define B_PCH_ILB_MC_DRTC BIT3 // Disable RTC\r | |
| 255 | #define B_PCH_ILB_MC_D8259 BIT2 // Disable 8259\r | |
| 256 | #define B_PCH_ILB_MC_D8254 BIT1 // Disable 8254\r | |
| 257 | #define B_PCH_ILB_MC_AME BIT0 // Alternate Access Mode Enable\r | |
| 258 | \r | |
| 259 | #define R_PCH_ILB_PIRQA_ROUT 0x08 // PIRQA Routing Control\r | |
| 260 | #define R_PCH_ILB_PIRQB_ROUT 0x09 // PIRQB Routing Control\r | |
| 261 | #define R_PCH_ILB_PIRQC_ROUT 0x0A // PIRQC Routing Control\r | |
| 262 | #define R_PCH_ILB_PIRQD_ROUT 0x0B // PIRQD Routing Control\r | |
| 263 | #define R_PCH_ILB_PIRQE_ROUT 0x0C // PIRQE Routing Control\r | |
| 264 | #define R_PCH_ILB_PIRQF_ROUT 0x0D // PIRQF Routing Control\r | |
| 265 | #define R_PCH_ILB_PIRQG_ROUT 0x0E // PIRQG Routing Control\r | |
| 266 | #define R_PCH_ILB_PIRQH_ROUT 0x0F // PIRQH Routing Control\r | |
| 267 | //\r | |
| 268 | // Bit values are the same for R_PCH_ILB_PIRQA_ROUT to R_PCH_ILB_PIRQH_ROUT\r | |
| 269 | //\r | |
| 270 | #define B_PCH_ILB_PIRQX_ROUT_IRQEN BIT7 // Interrupt Routing Enable\r | |
| 271 | #define B_PCH_ILB_PIRQX_ROUT 0x0F // IRQ Routing\r | |
| 272 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_3 0x03 // Route to IRQ3\r | |
| 273 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_4 0x04 // Route to IRQ4\r | |
| 274 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_5 0x05 // Route to IRQ5\r | |
| 275 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_6 0x06 // Route to IRQ6\r | |
| 276 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_7 0x07 // Route to IRQ7\r | |
| 277 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_9 0x09 // Route to IRQ9\r | |
| 278 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_10 0x0A // Route to IRQ10\r | |
| 279 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_11 0x0B // Route to IRQ11\r | |
| 280 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_12 0x0C // Route to IRQ12\r | |
| 281 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_14 0x0E // Route to IRQ14\r | |
| 282 | #define V_PCH_ILB_PIRQX_ROUT_IRQ_15 0x0F // Route to IRQ15\r | |
| 283 | \r | |
| 284 | #define R_PCH_ILB_SERIRQ_CNT 0x10 // Serial IRQ Control\r | |
| 285 | #define B_PCH_ILB_SERIRQ_CNT_SIRQMD BIT7 // Mode\r | |
| 286 | \r | |
| 287 | #define R_PCH_ILB_ULKMC 0x14 // USB Legacy Keyboard / Mouse Control\r | |
| 288 | #define B_PCH_ILB_ULKMC_TRAPBY64W BIT11 // SMI Caused by Port 64 Write\r | |
| 289 | #define B_PCH_ILB_ULKMC_TRAPBY64R BIT10 // SMI Caused by Port 64 Read\r | |
| 290 | #define B_PCH_ILB_ULKMC_TRAPBY60W BIT9 // SMI Caused by Port 60 Write\r | |
| 291 | #define B_PCH_ILB_ULKMC_TRAPBY60R BIT8 // SMI Caused by Port 60 Read\r | |
| 292 | #define B_PCH_ILB_ULKMC_64WEN BIT3 // SMI on Port 64 Writes Enable\r | |
| 293 | #define B_PCH_ILB_ULKMC_64REN BIT2 // SMI on Port 64 Reads Enable\r | |
| 294 | #define B_PCH_ILB_ULKMC_60WEN BIT1 // SMI on Port 60 Writes Enable\r | |
| 295 | #define B_PCH_ILB_ULKMC_60REN BIT0 // SMI on Port 60 Reads Enable\r | |
| 296 | \r | |
| 297 | #define R_PCH_ILB_FWH_BIOS_SEL 0x18 // FWH ID Select\r | |
| 298 | #define B_PCH_ILB_FWH_BIOS_SEL_F8 0xF0000000 // F8-FF ID Select\r | |
| 299 | #define B_PCH_ILB_FWH_BIOS_SEL_F0 0x0F000000 // F0-F7 ID Select\r | |
| 300 | #define B_PCH_ILB_FWH_BIOS_SEL_E8 0x00F00000 // E8-EF ID Select\r | |
| 301 | #define B_PCH_ILB_FWH_BIOS_SEL_E0 0x000F0000 // E0-E7 ID Select\r | |
| 302 | #define B_PCH_ILB_FWH_BIOS_SEL_D8 0x0000F000 // D8-DF ID Select\r | |
| 303 | #define B_PCH_ILB_FWH_BIOS_SEL_D0 0x00000F00 // D0-D7 ID Select\r | |
| 304 | #define B_PCH_ILB_FWH_BIOS_SEL_C8 0x000000F0 // C8-CF ID Select\r | |
| 305 | #define B_PCH_ILB_FWH_BIOS_SEL_C0 0x0000000F // C0-C7 ID Select\r | |
| 306 | \r | |
| 307 | #define R_PCH_ILB_BIOS_CNTL 0x1C // BIOS Control\r | |
| 308 | #define S_PCH_ILB_BIOS_CNTL 4\r | |
| 309 | #define B_PCH_ILB_BIOS_CNTL_PFE BIT8 // Prefetch Enable\r | |
| 310 | #define B_PCH_ILB_BIOS_CNTL_LE BIT1 // Lock Enable\r | |
| 311 | #define N_PCH_ILB_BIOS_CNTL_LE 1\r | |
| 312 | #define B_PCH_ILB_BIOS_CNTL_WP BIT0 // Write Protect\r | |
| 313 | \r | |
| 314 | #define R_PCH_ILB_D0IR 0x20 // Device 0 Interrupt Route\r | |
| 315 | #define R_PCH_ILB_D1IR 0x22 // Device 1 Interrupt Route\r | |
| 316 | #define R_PCH_ILB_D2IR 0x24 // Device 2 Interrupt Route\r | |
| 317 | #define R_PCH_ILB_D3IR 0x26 // Device 3 Interrupt Route\r | |
| 318 | #define R_PCH_ILB_D4IR 0x28 // Device 4 Interrupt Route\r | |
| 319 | #define R_PCH_ILB_D5IR 0x2A // Device 5 Interrupt Route\r | |
| 320 | #define R_PCH_ILB_D6IR 0x2C // Device 6 Interrupt Route\r | |
| 321 | #define R_PCH_ILB_D7IR 0x2E // Device 7 Interrupt Route\r | |
| 322 | #define R_PCH_ILB_D8IR 0x30 // Device 8 Interrupt Route\r | |
| 323 | #define R_PCH_ILB_D9IR 0x32 // Device 9 Interrupt Route\r | |
| 324 | #define R_PCH_ILB_D10IR 0x34 // Device 10 Interrupt Route\r | |
| 325 | #define R_PCH_ILB_D11IR 0x36 // Device 11 Interrupt Route\r | |
| 326 | #define R_PCH_ILB_D12IR 0x38 // Device 12 Interrupt Route\r | |
| 327 | #define R_PCH_ILB_D13IR 0x3A // Device 13 Interrupt Route\r | |
| 328 | #define R_PCH_ILB_D14IR 0x3C // Device 14 Interrupt Route\r | |
| 329 | #define R_PCH_ILB_D15IR 0x3E // Device 15 Interrupt Route\r | |
| 330 | #define R_PCH_ILB_D16IR 0x40 // Device 16 Interrupt Route\r | |
| 331 | #define R_PCH_ILB_D17IR 0x42 // Device 17 Interrupt Route\r | |
| 332 | #define R_PCH_ILB_D18IR 0x44 // Device 18 Interrupt Route\r | |
| 333 | #define R_PCH_ILB_D19IR 0x46 // Device 19 Interrupt Route\r | |
| 334 | #define R_PCH_ILB_D20IR 0x48 // Device 20 Interrupt Route\r | |
| 335 | #define R_PCH_ILB_D21IR 0x4A // Device 21 Interrupt Route\r | |
| 336 | #define R_PCH_ILB_D22IR 0x4C // Device 22 Interrupt Route\r | |
| 337 | #define R_PCH_ILB_D23IR 0x4E // Device 23 Interrupt Route\r | |
| 338 | #define R_PCH_ILB_D24IR 0x50 // Device 24 Interrupt Route\r | |
| 339 | #define R_PCH_ILB_D25IR 0x52 // Device 25 Interrupt Route\r | |
| 340 | #define R_PCH_ILB_D26IR 0x54 // Device 26 Interrupt Route\r | |
| 341 | #define R_PCH_ILB_D27IR 0x56 // Device 27 Interrupt Route\r | |
| 342 | #define R_PCH_ILB_D28IR 0x58 // Device 28 Interrupt Route\r | |
| 343 | #define R_PCH_ILB_D29IR 0x5A // Device 29 Interrupt Route\r | |
| 344 | #define R_PCH_ILB_D30IR 0x5C // Device 30 Interrupt Route\r | |
| 345 | #define R_PCH_ILB_D31IR 0x5E // Device 31 Interrupt Route\r | |
| 346 | \r | |
| 347 | #define B_PCH_ILB_DXXIR_IDR_MASK (BIT14 | BIT13 | BIT12) // INTD Mask\r | |
| 348 | #define V_PCH_ILB_DXXIR_IDR_PIRQA 0 // INTD Mapping to IRQ A\r | |
| 349 | #define V_PCH_ILB_DXXIR_IDR_PIRQB BIT12 // INTD Mapping to IRQ B\r | |
| 350 | #define V_PCH_ILB_DXXIR_IDR_PIRQC BIT13 // INTD Mapping to IRQ C\r | |
| 351 | #define V_PCH_ILB_DXXIR_IDR_PIRQD (BIT13 | BIT12) // INTD Mapping to IRQ D\r | |
| 352 | #define V_PCH_ILB_DXXIR_IDR_PIRQE BIT14 // INTD Mapping to IRQ E\r | |
| 353 | #define V_PCH_ILB_DXXIR_IDR_PIRQF (BIT14 | BIT12) // INTD Mapping to IRQ F\r | |
| 354 | #define V_PCH_ILB_DXXIR_IDR_PIRQG (BIT14 | BIT13) // INTD Mapping to IRQ G\r | |
| 355 | #define V_PCH_ILB_DXXIR_IDR_PIRQH (BIT14 | BIT13 | BIT12) // INTD Mapping to IRQ H\r | |
| 356 | \r | |
| 357 | #define B_PCH_ILB_DXXIR_ICR_MASK (BIT10 | BIT9 | BIT8) // INTC Mask\r | |
| 358 | #define V_PCH_ILB_DXXIR_ICR_PIRQA 0 // INTC Mapping to IRQ A\r | |
| 359 | #define V_PCH_ILB_DXXIR_ICR_PIRQB BIT8 // INTC Mapping to IRQ B\r | |
| 360 | #define V_PCH_ILB_DXXIR_ICR_PIRQC BIT9 // INTC Mapping to IRQ C\r | |
| 361 | #define V_PCH_ILB_DXXIR_ICR_PIRQD (BIT9 | BIT8) // INTC Mapping to IRQ D\r | |
| 362 | #define V_PCH_ILB_DXXIR_ICR_PIRQE BIT10 // INTC Mapping to IRQ E\r | |
| 363 | #define V_PCH_ILB_DXXIR_ICR_PIRQF (BIT10 | BIT8) // INTC Mapping to IRQ F\r | |
| 364 | #define V_PCH_ILB_DXXIR_ICR_PIRQG (BIT10 | BIT9) // INTC Mapping to IRQ G\r | |
| 365 | #define V_PCH_ILB_DXXIR_ICR_PIRQH (BIT10 | BIT9 | BIT8) // INTC Mapping to IRQ H\r | |
| 366 | \r | |
| 367 | #define B_PCH_ILB_DXXIR_IBR_MASK (BIT6 | BIT5 | BIT4) // INTB Mask\r | |
| 368 | #define V_PCH_ILB_DXXIR_IBR_PIRQA 0 // INTB Mapping to IRQ A\r | |
| 369 | #define V_PCH_ILB_DXXIR_IBR_PIRQB BIT4 // INTB Mapping to IRQ B\r | |
| 370 | #define V_PCH_ILB_DXXIR_IBR_PIRQC BIT5 // INTB Mapping to IRQ C\r | |
| 371 | #define V_PCH_ILB_DXXIR_IBR_PIRQD (BIT5 | BIT4) // INTB Mapping to IRQ D\r | |
| 372 | #define V_PCH_ILB_DXXIR_IBR_PIRQE BIT6 // INTB Mapping to IRQ E\r | |
| 373 | #define V_PCH_ILB_DXXIR_IBR_PIRQF (BIT6 | BIT4) // INTB Mapping to IRQ F\r | |
| 374 | #define V_PCH_ILB_DXXIR_IBR_PIRQG (BIT6 | BIT5) // INTB Mapping to IRQ G\r | |
| 375 | #define V_PCH_ILB_DXXIR_IBR_PIRQH (BIT6 | BIT5 | BIT4) // INTB Mapping to IRQ H\r | |
| 376 | \r | |
| 377 | #define B_PCH_ILB_DXXIR_IAR_MASK (BIT2 | BIT1 | BIT0) // INTA Mask\r | |
| 378 | #define V_PCH_ILB_DXXIR_IAR_PIRQA 0 // INTA Mapping to IRQ A\r | |
| 379 | #define V_PCH_ILB_DXXIR_IAR_PIRQB BIT0 // INTA Mapping to IRQ B\r | |
| 380 | #define V_PCH_ILB_DXXIR_IAR_PIRQC BIT1 // INTA Mapping to IRQ C\r | |
| 381 | #define V_PCH_ILB_DXXIR_IAR_PIRQD (BIT1 | BIT0) // INTA Mapping to IRQ D\r | |
| 382 | #define V_PCH_ILB_DXXIR_IAR_PIRQE BIT2 // INTA Mapping to IRQ E\r | |
| 383 | #define V_PCH_ILB_DXXIR_IAR_PIRQF (BIT2 | BIT0) // INTA Mapping to IRQ F\r | |
| 384 | #define V_PCH_ILB_DXXIR_IAR_PIRQG (BIT2 | BIT1) // INTA Mapping to IRQ G\r | |
| 385 | #define V_PCH_ILB_DXXIR_IAR_PIRQH (BIT2 | BIT1 | BIT0) // INTA Mapping to IRQ H\r | |
| 386 | \r | |
| 387 | #define R_PCH_ILB_OIC 0x60 // Other Interrupt Controller\r | |
| 388 | #define B_PCH_ILB_OIC_SIRQEN BIT12 // Serial IRQ Enable\r | |
| 389 | #define B_PCH_ILB_OIC_AEN BIT8 // APIC Enable\r | |
| 390 | \r | |
| 391 | #define R_PCH_ILB_RTC_CONF 0x64 // RTC Control\r | |
| 392 | #define B_PCH_ILB_RTC_CONF_UCMOS_LOCK BIT1 // Upper 128 Byte Lock\r | |
| 393 | #define B_PCH_ILB_RTC_CONF_LCMOS_LOCK BIT0 // Lower 128 Byte Lock\r | |
| 394 | \r | |
| 395 | #define R_PCH_ILB_RTM 0x68 // RTC Test Mode\r | |
| 396 | #define B_PCH_ILB_RTM_RTM1 (BIT2 | BIT1 | BIT0)\r | |
| 397 | \r | |
| 398 | #define R_PCH_ILB_BCS 0x6C // BIOS Control Status\r | |
| 399 | #define B_PCH_ILB_BCS_SMIWPEN BIT1 // SMI WPD Enable\r | |
| 400 | #define B_PCH_ILB_BCS_SMIWPST BIT0 // SMI WPD Status\r | |
| 401 | \r | |
| 402 | #define R_PCH_ILB_LE 0x70 // LE\r | |
| 403 | #define B_PCH_ILB_LE_IRQ12C BIT1 // IRQ12 Cause\r | |
| 404 | #define B_PCH_ILB_LE_IRQ1C BIT0 // IRQ1 Cause\r | |
| 405 | \r | |
| 406 | #define R_PCH_ILB_RTCC 0x74 // RTC HIP Configuration\r | |
| 407 | #define B_PCH_ILB_RTCC_RTCB4 BIT6 // RTC Bias Resistor 4, Adds 480 Kohm\r | |
| 408 | #define B_PCH_ILB_RTCC_RTCB3 BIT5 // RTC Bias Resistor 3, Adds 240 Kohm\r | |
| 409 | #define B_PCH_ILB_RTCC_RTCB2 BIT4 // RTC Bias Resistor 2, Adds 120 Kohm\r | |
| 410 | #define B_PCH_ILB_RTCC_RTCB1 BIT3 // RTC Bias Resistor 1, Adds 60 Kohm\r | |
| 411 | #define B_PCH_ILB_RTCC_RTCB0 BIT2 // RTC Bias Resistor 0, Adds 30 Kohm\r | |
| 412 | #define B_PCH_ILB_RTCC_DSWEN BIT1 // Deep Sleep Well Enable\r | |
| 413 | #define B_PCH_ILB_RTCC_FEN BIT0 // Enable the Fast Oscillator Bypass Mode\r | |
| 414 | \r | |
| 415 | #define R_PCH_ILB_DEF0 0x78 // Defeature Register 0\r | |
| 416 | #define B_PCH_ILB_DEF0_SHRTSYNC BIT22 // Short Sync Abort Defeature\r | |
| 417 | #define B_PCH_ILB_DEF0_SDD BIT21 // Sub Decode Disable\r | |
| 418 | \r | |
| 419 | #define R_PCH_ILB_DEF1 0x7C // Defeature Register 1\r | |
| 420 | #define B_PCH_ILB_DEF1_TPMPF BIT10 // usb2leg_chknbit_TPM_PF\r | |
| 421 | #define B_PCH_ILB_DEF1_HPETDEF BIT8 // usb2leg_chknbit_hpet\r | |
| 422 | #define B_PCH_ILB_DEF1_ECWS BIT6 // 8254 Early CW Select\r | |
| 423 | #define B_PCH_ILB_DEF1_FOF BIT5 // 8254 Freeze on first on 1st rd wr11\r | |
| 424 | #define B_PCH_ILB_DEF1_FOAR BIT4 // 8254 Freeze_On_AnyRead\r | |
| 425 | #define B_PCH_ILB_DEF1_LMOO BIT3 // 8259 L2L0_Match_On_OCW2\r | |
| 426 | #define B_PCH_ILB_DEF1_DFP BIT2 // 8259 Disable_Freeze_Priority\r | |
| 427 | #define B_PCH_ILB_DEF1_EETI BIT1 // 8259 Extend_EdgeTrig_IRQ\r | |
| 428 | #define B_PCH_ILB_DEF1_DSAEOI BIT0 // 8259 Disable_Slave_AEOI\r | |
| 429 | \r | |
| 430 | #define R_PCH_ILB_GNMI 0x80 // NMI Register\r | |
| 431 | #define S_PCH_ILB_GNMI 4\r | |
| 432 | #define B_PCH_ILB_GNMI_NMI2SMIEN BIT6 // NMI to SMI Enable\r | |
| 433 | #define N_PCH_ILB_GNMI_NMI2SMIEN 6\r | |
| 434 | #define B_PCH_ILB_GNMI_NMI2SMIST BIT5 // NMI to SMI Status\r | |
| 435 | #define N_PCH_ILB_GNMI_NMI2SMIST 5\r | |
| 436 | #define B_PCH_ILB_GNMI_NMIN BIT4 // NMI NOW\r | |
| 437 | #define B_PCH_ILB_GNMI_NMINS BIT3 // NMI NOW Status\r | |
| 438 | #define B_PCH_ILB_GNMI_GNMIED BIT2 // GPIO NMI Edge Detection\r | |
| 439 | #define B_PCH_ILB_GNMI_GNMIE BIT1 // GPIO NMI Enable\r | |
| 440 | #define B_PCH_ILB_GNMI_GNMIS BIT0 // GPIO NMI Status\r | |
| 441 | \r | |
| 442 | #define R_PCH_ILB_LPCC 0x84 // LPC Control\r | |
| 443 | #define B_PCH_ILB_LPCC_LPCCLK_SLC BIT8 // iLPCCLK Mux Select\r | |
| 444 | #define B_PCH_ILB_LPCC_LPCCLK_FORCE_OFF BIT3\r | |
| 445 | #define B_PCH_ILB_LPCC_CLKRUN_EN BIT2 // LPC CLKRUN Protocol Enable\r | |
| 446 | #define B_PCH_ILB_LPCC_LPCCLK1EN BIT1 // Clock 1 Enable\r | |
| 447 | #define B_PCH_ILB_LPCC_LPCCLK0EN BIT0 // Clock 0 Enable\r | |
| 448 | \r | |
| 449 | #define R_PCH_ILB_IRQE 0x88 // IRQ Enable Control\r | |
| 450 | #define B_PCH_ILB_IRQE_IRQ4TO7EN (BIT7 | BIT6 | BIT5 | BIT4) // IRQ4 - IRQ7 Enable\r | |
| 451 | #define B_PCH_ILB_IRQE_UARTIRQEN_IRQ3 BIT3 // UART IRQ3 Enable\r | |
| 452 | \r | |
| 453 | //\r | |
| 454 | // ACPI and Legacy I/O Registers (ABASE)\r | |
| 455 | //\r | |
| 456 | #define R_PCH_ACPI_PM1_STS 0x00 // Power Management 1 Status\r | |
| 457 | #define S_PCH_ACPI_PM1_STS 2\r | |
| 458 | #define B_PCH_ACPI_PM1_STS_WAK BIT15 // Wake Status\r | |
| 459 | #define B_PCH_ACPI_PM1_STS_WAK_PCIE0 BIT14 // PCI Express 0 Wake Status\r | |
| 460 | #define B_PCH_ACPI_PM1_STS_USB_CLKLESS BIT13 // USB Clockless Status\r | |
| 461 | #define B_PCH_ACPI_PM1_STS_PRBTNOR BIT11 // Power Button Override Status\r | |
| 462 | #define B_PCH_ACPI_PM1_STS_RTC BIT10 // RTC Status\r | |
| 463 | #define B_PCH_ACPI_PM1_STS_PWRBTN BIT8 // Power Button Status\r | |
| 464 | #define B_PCH_ACPI_PM1_STS_GBL BIT5 // Global Status\r | |
| 465 | #define B_PCH_ACPI_PM1_STS_WAK_PCIE3 BIT4 // PCI Express 3 Wake Status\r | |
| 466 | #define B_PCH_ACPI_PM1_STS_WAK_PCIE2 BIT3 // PCI Express 2 Wake Status\r | |
| 467 | #define B_PCH_ACPI_PM1_STS_WAK_PCIE1 BIT2 // PCI Express 1 Wake Status\r | |
| 468 | #define B_PCH_ACPI_PM1_STS_TMROF BIT0 // Timer Overflow Status\r | |
| 469 | #define N_PCH_ACPI_PM1_STS_WAK 15\r | |
| 470 | #define N_PCH_ACPI_PM1_STS_PRBTNOR 11\r | |
| 471 | #define N_PCH_ACPI_PM1_STS_RTC 10\r | |
| 472 | #define N_PCH_ACPI_PM1_STS_PWRBTN 8\r | |
| 473 | #define N_PCH_ACPI_PM1_STS_GBL 5\r | |
| 474 | #define N_PCH_ACPI_PM1_STS_TMROF 0\r | |
| 475 | \r | |
| 476 | #define R_PCH_ACPI_PM1_EN 0x02 // Power Management 1 Enables\r | |
| 477 | #define S_PCH_ACPI_PM1_EN 2\r | |
| 478 | #define B_PCH_ACPI_PM1_WAK_DIS_PCIE0 BIT14 // PCI Express 0 Disable\r | |
| 479 | #define B_PCH_ACPI_PM1_EN_USB_CLKLESS BIT13 // USB Clockless Enable Bit\r | |
| 480 | #define B_PCH_ACPI_PM1_EN_RTC BIT10 // RTC Alarm Enable Bit\r | |
| 481 | #define B_PCH_ACPI_PM1_EN_PWRBTN BIT8 // Power Button Enable Bit\r | |
| 482 | #define B_PCH_ACPI_PM1_EN_GBL BIT5 // Global Enable Bit\r | |
| 483 | #define B_PCH_ACPI_PM1_WAK_DIS_PCIE3 BIT4 // PCI Express 3 Disable\r | |
| 484 | #define B_PCH_ACPI_PM1_WAK_DIS_PCIE2 BIT3 // PCI Express 2 Disable\r | |
| 485 | #define B_PCH_ACPI_PM1_WAK_DIS_PCIE1 BIT2 // PCI Express 1 Disable\r | |
| 486 | #define B_PCH_ACPI_PM1_EN_TMROF BIT0 // Timer Overflow Interrupt Enable Bit\r | |
| 487 | #define N_PCH_ACPI_PM1_EN_RTC 10\r | |
| 488 | #define N_PCH_ACPI_PM1_EN_PWRBTN 8\r | |
| 489 | #define N_PCH_ACPI_PM1_EN_GBL 5\r | |
| 490 | #define N_PCH_ACPI_PM1_EN_TMROF 0\r | |
| 491 | \r | |
| 492 | #define R_PCH_ACPI_PM1_CNT 0x04 // Power Management 1 Control\r | |
| 493 | #define S_PCH_ACPI_PM1_CNT 4\r | |
| 494 | #define B_PCH_ACPI_PM1_CNT_SLP_EN BIT13 // Sleep enable\r | |
| 495 | #define B_PCH_ACPI_PM1_CNT_SLP_TYP (BIT12 | BIT11 | BIT10) // Sleep Type\r | |
| 496 | #define V_PCH_ACPI_PM1_CNT_S0 0x00000000 // ON (S0)\r | |
| 497 | #define V_PCH_ACPI_PM1_CNT_S1 0x00000400 // Puts CPU in S1 state (S1)\r | |
| 498 | #define V_PCH_ACPI_PM1_CNT_S3 0x00001400 // Suspend-to-RAM (S3)\r | |
| 499 | #define V_PCH_ACPI_PM1_CNT_S4 0x00001800 // Suspend-to-Disk (S4)\r | |
| 500 | #define V_PCH_ACPI_PM1_CNT_S5 0x00001C00 // Soft Off (S5)\r | |
| 501 | #define B_PCH_ACPI_PM1_CNT_GBL_RLS BIT2\r | |
| 502 | #define B_PCH_ACPI_PM1_CNT_BM_RLD BIT1 // Treated as Scratchpad Bit\r | |
| 503 | #define B_PCH_ACPI_PM1_CNT_SCI_EN BIT0 // SCI Enable\r | |
| 504 | \r | |
| 505 | #define R_PCH_ACPI_PM1_TMR 0x08 // Power Management 1 Timer\r | |
| 506 | #define B_PCH_ACPI_PM1_TMR_VAL 0xFFFFFF // The timer value mask\r | |
| 507 | #define V_PCH_ACPI_PM1_TMR_MAX_VAL 0x1000000 // The timer is 24 bit overflow\r | |
| 508 | #define V_PCH_ACPI_PM1_TMR_FREQUENCY 3579545 // Timer Frequency\r | |
| 509 | #define V_PCH_ACPI_PM1_TMR_NUM_BITS 24 // Programmed to 24 not 32\r | |
| 510 | #define V_PCH_ACPI_PM1_TMR_MAX_BITS 32\r | |
| 511 | \r | |
| 512 | #define R_PCH_ACPI_GPE0a_STS 0x20 // General Purpose Event 0a Status\r | |
| 513 | #define S_PCH_ACPI_GPE0a_STS 4\r | |
| 514 | #define B_PCH_ACPI_GPE0a_STS_CORE_GPIO 0xFF000000 // CORE GPIO Status\r | |
| 515 | #define B_PCH_ACPI_GPE0a_STS_SUS_GPIO 0x00FF0000 // SUS GPIO Status\r | |
| 516 | #define B_PCH_ACPI_GPE0a_STS_PME_B0 BIT13 // Power Management Event Bus 0 Status\r | |
| 517 | #define B_PCH_ACPI_GPE0a_STS_BATLOW BIT10 // Battery Low Status\r | |
| 518 | #define B_PCH_ACPI_GPE0a_STS_PCI_EXP BIT9 // PCI Express Status\r | |
| 519 | #define B_PCH_ACPI_GPE0a_STS_GUNIT_SCI BIT5 // GUNIT SCI Status\r | |
| 520 | #define B_PCH_ACPI_GPE0a_STS_PUNIT_SCI BIT4 // PUNIT SCI Status\r | |
| 521 | #define B_PCH_ACPI_GPE0a_STS_SWGPE BIT2 // Software GPE Status\r | |
| 522 | #define B_PCH_ACPI_GPE0a_STS_HOT_PLUG BIT1 // Hot Plug Status\r | |
| 523 | #define N_PCH_ACPI_GPE0a_STS_PME_B0 13\r | |
| 524 | #define N_PCH_ACPI_GPE0a_STS_BATLOW 10\r | |
| 525 | #define N_PCH_ACPI_GPE0a_STS_PCI_EXP 9\r | |
| 526 | #define N_PCH_ACPI_GPE0a_STS_GUNIT_SCI 5\r | |
| 527 | #define N_PCH_ACPI_GPE0a_STS_PUNIT_SCI 4\r | |
| 528 | #define N_PCH_ACPI_GPE0a_STS_SWGPE 2\r | |
| 529 | #define N_PCH_ACPI_GPE0a_STS_HOT_PLUG 1\r | |
| 530 | \r | |
| 531 | #define R_PCH_ACPI_GPE0a_EN 0x28 // General Purpose Event 0a Enables\r | |
| 532 | #define S_PCH_ACPI_GPE0a_EN 4\r | |
| 533 | #define B_PCH_ACPI_GPE0a_EN_CORE_GPIO 0xFF000000 // CORE GPIO Enable\r | |
| 534 | #define B_PCH_ACPI_GPE0a_EN_SUS_GPIO 0x00FF0000 // SUS GPIO Enable\r | |
| 535 | #define B_PCH_ACPI_GPE0a_EN_PME_B0 BIT13 // Power Management Event Bus 0 Enable\r | |
| 536 | #define B_PCH_ACPI_GPE0a_EN_BATLOW BIT10 // Battery Low Enable\r | |
| 537 | #define B_PCH_ACPI_GPE0a_EN_PCI_EXP BIT9 // PCI Express Enable\r | |
| 538 | #define B_PCH_ACPI_GPE0a_EN_SWGPE BIT2 // Software GPE Enable\r | |
| 539 | #define B_PCH_ACPI_GPE0a_EN_HOT_PLUG BIT1 // Hot Plug Enable\r | |
| 540 | #define N_PCH_ACPI_GPE0a_EN_PME_B0 13\r | |
| 541 | #define N_PCH_ACPI_GPE0a_EN_BATLOW 10\r | |
| 542 | #define N_PCH_ACPI_GPE0a_EN_PCI_EXP 9\r | |
| 543 | #define N_PCH_ACPI_GPE0a_EN_SWGPE 2\r | |
| 544 | #define N_PCH_ACPI_GPE0a_EN_HOT_PLUG 1\r | |
| 545 | \r | |
| 546 | #define R_PCH_SMI_EN 0x30 // SMI Control and Enable\r | |
| 547 | #define S_PCH_SMI_EN 4\r | |
| 548 | #define B_PCH_SMI_EN_LEGACY_USB3 BIT31 // Legacy USB 3 Enable\r | |
| 549 | #define B_PCH_SMI_EN_INTEL_USB2 BIT18 // Intel USB 2 Enable\r | |
| 550 | #define B_PCH_SMI_EN_LEGACY_USB2 BIT17 // Legacy USB 2 Enable\r | |
| 551 | #define B_PCH_SMI_EN_PERIODIC BIT14 // Periodic Enable\r | |
| 552 | #define B_PCH_SMI_EN_TCO BIT13 // TCO Enable\r | |
| 553 | #define B_PCH_SMI_EN_BIOS_RLS BIT7 // BIOS RLS\r | |
| 554 | #define B_PCH_SMI_EN_SWSMI_TMR BIT6 // Software SMI Timer Enable\r | |
| 555 | #define B_PCH_SMI_EN_APMC BIT5 // APMC Enable\r | |
| 556 | #define B_PCH_SMI_EN_ON_SLP_EN BIT4 // SMI On Sleep Enable\r | |
| 557 | #define B_PCH_SMI_EN_BIOS BIT2 // BIOS Enable\r | |
| 558 | #define B_PCH_SMI_EN_EOS BIT1 // End of SMI\r | |
| 559 | #define B_PCH_SMI_EN_GBL_SMI BIT0 // Global SMI Enable\r | |
| 560 | #define N_PCH_SMI_EN_LEGACY_USB3 31\r | |
| 561 | #define N_PCH_SMI_EN_GPIO_UNLOCK 27\r | |
| 562 | #define N_PCH_SMI_EN_INTEL_USB2 18\r | |
| 563 | #define N_PCH_SMI_EN_LEGACY_USB2 17\r | |
| 564 | #define N_PCH_SMI_EN_PERIODIC 14\r | |
| 565 | #define N_PCH_SMI_EN_TCO 13\r | |
| 566 | #define N_PCH_SMI_EN_BIOS_RLS 7\r | |
| 567 | #define N_PCH_SMI_EN_SWSMI_TMR 6\r | |
| 568 | #define N_PCH_SMI_EN_APMC 5\r | |
| 569 | #define N_PCH_SMI_EN_ON_SLP_EN 4\r | |
| 570 | #define N_PCH_SMI_EN_BIOS 2\r | |
| 571 | #define N_PCH_SMI_EN_EOS 1\r | |
| 572 | #define N_PCH_SMI_EN_GBL_SMI 0\r | |
| 573 | \r | |
| 574 | #define R_PCH_SMI_STS 0x34 // SMI Status Register\r | |
| 575 | #define S_PCH_SMI_STS 4\r | |
| 576 | #define B_PCH_SMI_STS_LEGACY_USB3 BIT31 // Legacy USB 3 Status\r | |
| 577 | #define B_PCH_SMI_STS_GUNIT_SMI BIT29 // GUNIT SMI Status\r | |
| 578 | #define B_PCH_SMI_STS_PUNIT_SMI BIT28 // PUNIT SMI Status\r | |
| 579 | #define B_PCH_SMI_STS_SPI BIT26 // SPI SMI Status\r | |
| 580 | #define B_PCH_SMI_STS_PCI_EXP BIT20 // PCI Express SMI Status\r | |
| 581 | #define B_PCH_SMI_STS_INTEL_USB2 BIT18 // Intel USB 2 Status\r | |
| 582 | #define B_PCH_SMI_STS_LEGACY_USB2 BIT17 // Legacy USB 2 Status\r | |
| 583 | #define N_PCH_SMI_STS_TCO 13\r | |
| 584 | #define B_PCH_SMI_STS_SMBUS BIT16 // SMBUS SMI Status\r | |
| 585 | #define B_PCH_SMI_STS_ILB BIT15 // ILB SMI Status\r | |
| 586 | #define B_PCH_SMI_STS_PERIODIC BIT14 // Periodic Status\r | |
| 587 | #define B_PCH_SMI_STS_TCO BIT13 // TCO Status\r | |
| 588 | #define B_PCH_SMI_STS_GPE0 BIT9 // GPE0 Status\r | |
| 589 | #define B_PCH_SMI_STS_PM1_STS_REG BIT8 // PM1 Status Register\r | |
| 590 | #define B_PCH_SMI_STS_SWSMI_TMR BIT6 // Software SMI Timer Status\r | |
| 591 | #define B_PCH_SMI_STS_APM BIT5 // APM Status\r | |
| 592 | #define B_PCH_SMI_STS_ON_SLP_EN BIT4 // SMI On Sleep Enable Status\r | |
| 593 | #define B_PCH_SMI_STS_BIOS BIT2 // BIOS Status\r | |
| 594 | #define N_PCH_SMI_STS_LEGACY_USB3 31\r | |
| 595 | #define N_PCH_SMI_STS_SPI 26\r | |
| 596 | #define N_PCH_SMI_STS_PCI_EXP 20\r | |
| 597 | #define N_PCH_SMI_STS_INTEL_USB2 18\r | |
| 598 | #define N_PCH_SMI_STS_LEGACY_USB2 17\r | |
| 599 | #define N_PCH_SMI_STS_SMBUS 16\r | |
| 600 | #define N_PCH_SMI_STS_ILB 15\r | |
| 601 | #define N_PCH_SMI_STS_PERIODIC 14\r | |
| 602 | #define N_PCH_SMI_STS_TCO 13\r | |
| 603 | #define N_PCH_SMI_STS_GPE0 9\r | |
| 604 | #define N_PCH_SMI_STS_PM1_STS_REG 8\r | |
| 605 | #define N_PCH_SMI_STS_SWSMI_TMR 6\r | |
| 606 | #define N_PCH_SMI_STS_APM 5\r | |
| 607 | #define N_PCH_SMI_STS_ON_SLP_EN 4\r | |
| 608 | #define N_PCH_SMI_STS_BIOS 2\r | |
| 609 | \r | |
| 610 | #define R_PCH_ALT_GP_SMI_EN 0x38 // Alternate GPI SMI Enable\r | |
| 611 | #define S_PCH_ALT_GP_SMI_EN 2\r | |
| 612 | #define B_PCH_ALT_GP_SMI_EN_CORE_GPIO 0xFF00 // SUS GPIO SMI Enable\r | |
| 613 | #define B_PCH_ALT_GP_SMI_EN_SUS_GPIO 0x00FF // CORE GPIO SMI Enable\r | |
| 614 | \r | |
| 615 | #define R_PCH_ALT_GP_SMI_STS 0x3A // Alternate GPI SMI Status\r | |
| 616 | #define S_PCH_ALT_GP_SMI_STS 2\r | |
| 617 | #define B_PCH_ALT_GP_SMI_STS_CORE_GPIO 0xFF00 // SUS GPIO SMI Status\r | |
| 618 | #define B_PCH_ALT_GP_SMI_STS_SUS_GPIO 0x00FF // CORE GPIO SMI Status\r | |
| 619 | \r | |
| 620 | #define R_PCH_UPRWC 0x3C // USB Per-Port Registers Write Control\r | |
| 621 | #define S_PCH_UPRWC 2\r | |
| 622 | #define B_PCH_UPRWC_WR_EN_SMI_STS BIT8 // Write Enable Status\r | |
| 623 | #define B_PCH_UPRWC_WR_EN BIT1 // USB Per-Port Registers Write Enable\r | |
| 624 | #define B_PCH_UPRWC_WR_EN_SMI_EN BIT0 // Write Enable SMI Enable\r | |
| 625 | \r | |
| 626 | #define R_PCH_ACPI_GPE_CNTL 0x40 // General Purpose Event Control\r | |
| 627 | #define B_PCH_ACPI_GPE_CNTL_SWGPE_CTRL BIT17 // Software GPE Control\r | |
| 628 | #define B_PCH_ACPI_GPE_CNTL_PCIE3_SCI_EN BIT3\r | |
| 629 | #define B_PCH_ACPI_GPE_CNTL_PCIE2_SCI_EN BIT2\r | |
| 630 | #define B_PCH_ACPI_GPE_CNTL_PCIE1_SCI_EN BIT1\r | |
| 631 | #define B_PCH_ACPI_GPE_CNTL_PCIE0_SCI_EN BIT0\r | |
| 632 | \r | |
| 633 | #define R_PCH_ACPI_PM2_CNT 0x50 // PM2a Control Block\r | |
| 634 | #define B_PCH_ACPI_PM2_CNT_ARB_DIS BIT0 // Scratchpad Bit\r | |
| 635 | \r | |
| 636 | #define R_PCH_TCO_RLD 0x60 // TCO Reload\r | |
| 637 | #define B_PCH_TCO_RLD_VAL 0x3FF // TCO Timer Count Value\r | |
| 638 | \r | |
| 639 | #define R_PCH_TCO_STS 0x64 // TCO Timer Status\r | |
| 640 | #define S_PCH_TCO_STS 4\r | |
| 641 | #define B_PCH_TCO_STS_SECOND_TO BIT17 // Second Timeout Status\r | |
| 642 | #define B_PCH_TCO_STS_TIMEOUT BIT3 // Timeout\r | |
| 643 | #define N_PCH_TCO_STS_TIMEOUT 3\r | |
| 644 | \r | |
| 645 | #define R_PCH_TCO_CNT 0x68 // TCO Control\r | |
| 646 | #define S_PCH_TCO_CNT 2\r | |
| 647 | #define B_PCH_TCO_CNT_OS_POLICY (BIT21 | BIT20) // OS Policy\r | |
| 648 | #define B_PCH_TCO_CNT_LOCK BIT12 // TCO Enable Lock\r | |
| 649 | #define B_PCH_TCO_CNT_TMR_HLT BIT11 // TCO Timer Halt\r | |
| 650 | \r | |
| 651 | #define R_PCH_TCO_TMR 0x70 // TCO Timer\r | |
| 652 | #define B_PCH_TCO_TMR_TCO_TRLD 0x3FF0000\r | |
| 653 | \r | |
| 654 | //\r | |
| 655 | // PMC Memory Space Registers (PBASE)\r | |
| 656 | //\r | |
| 657 | #define R_PCH_PMC_PRSTS 0x00 // Power and Reset Status\r | |
| 658 | #define B_PCH_PMC_PRSTS_PRODID 0xFF000000 // Power Management Controller Product ID\r | |
| 659 | #define B_PCH_PMC_PRSTS_REVID 0x00FF0000 // Power Management Controller Revision ID\r | |
| 660 | #define B_PCH_PMC_PRSTS_PM_WD_TMR BIT15 // PMC Watchdog Timer Status\r | |
| 661 | #define B_PCH_PMC_PRSTS_CODE_COPIED_STS BIT11 // Patch Copied Over Status\r | |
| 662 | #define B_PCH_PMC_PRSTS_CODE_LOAD_TO BIT9 // Patch Load Timeout Status\r | |
| 663 | #define B_PCH_PMC_PRSTS_OP_STS BIT8 // PMC Operational Status\r | |
| 664 | #define B_PCH_PMC_PRSTS_SEC_GBLRST_STS BIT7 // SEC Global Reset Status\r | |
| 665 | #define B_PCH_PMC_PRSTS_SEC_WD_TMR_STS BIT6 // SEC Watchdog Timer Status\r | |
| 666 | #define B_PCH_PMC_PRSTS_WOL_OVR_WK_STS BIT5 // Wake On LAN Override Wake Status\r | |
| 667 | #define B_PCH_PMC_PRSTS_HOST_WAKE_STS BIT4 // PMC Host Wake Status\r | |
| 668 | \r | |
| 669 | #define R_PCH_PMC_PM_CFG 0x08 // Power Management Configuration\r | |
| 670 | #define B_PCH_PMC_PM_CFG_SPS BIT5 // Shutdown Policy Select\r | |
| 671 | #define B_PCH_PMC_PM_CFG_NO_REBOOT BIT4 // No Reboot Strap\r | |
| 672 | #define B_PCH_PMC_PM_CFG_SX_ENT_TO_EN BIT3 // S1 / 3 / 4 / 5 Entry Timeout Enable\r | |
| 673 | #define B_PCH_PMC_PM_CFG_TIMING_T581 (BIT1 | BIT0) // Timing t581\r | |
| 674 | \r | |
| 675 | #define R_PCH_PMC_PM_STS 0x0C // Power Management Status\r | |
| 676 | #define B_PCH_PMC_PM_STS_PMC_MSG_FULL BIT24 // PMC Message Full Status\r | |
| 677 | #define B_PCH_PMC_PM_STS_PMC_MSG_4_FULL BIT23 // PMC 4 Message Full Status\r | |
| 678 | #define B_PCH_PMC_PM_STS_PMC_MSG_3_FULL BIT22 // PMC 3 Message Full Status\r | |
| 679 | #define B_PCH_PMC_PM_STS_PMC_MSG_2_FULL BIT21 // PMC 2 Message Full Status\r | |
| 680 | #define B_PCH_PMC_PM_STS_PMC_MSG_1_FULL BIT20 // PMC 1 Message Full Status\r | |
| 681 | #define B_PCH_PMC_PM_STS_CODE_REQ BIT8 // Patch Request Status\r | |
| 682 | #define B_PCH_PMC_PM_STS_HPR_ENT_TO BIT2 // Host partition Reset Entry Timeout Status\r | |
| 683 | #define B_PCH_PMC_PM_STS_SX_ENT_TO BIT1 // S3 / 4 / 5 Entry Timeout Status\r | |
| 684 | \r | |
| 685 | #define R_PCH_PMC_MTPMC 0x10 // Message to PMC\r | |
| 686 | \r | |
| 687 | #define R_PCH_PMC_GEN_PMCON_1 0x20 // General PM Configuration 1\r | |
| 688 | #define B_PCH_PMC_GEN_PMCON_UART_EN BIT24 // UART Debug Port Enable\r | |
| 689 | #define B_PCH_PMC_GEN_PMCON_DRAM_INIT BIT23 // DRAM Initialization Scratchpad Bit\r | |
| 690 | #define B_PCH_PMC_GEN_PMCON_MEM_SR BIT21 // Memory Placed in Self-Refresh\r | |
| 691 | #define B_PCH_PMC_GEN_PMCON_SRS BIT20 // System Reset Status\r | |
| 692 | #define B_PCH_PMC_GEN_PMCON_CTS BIT19 // CPU Thermal Trip Status\r | |
| 693 | #define B_PCH_PMC_GEN_PMCON_MIN_SLP_S4 BIT18 // Minimum SLP_S4# Assertion Width Violation Status\r | |
| 694 | #define B_PCH_PMC_GEN_PMCON_PWROK_FLR BIT16 // PWROK Failure\r | |
| 695 | #define B_PCH_PMC_GEN_PMCON_PME_B0_S5_DIS BIT15 // PME B0 S5 Disable\r | |
| 696 | #define B_PCH_PMC_GEN_PMCON_SUS_PWR_FLR BIT14 // SUS Well Power Failure\r | |
| 697 | #define B_PCH_PMC_GEN_PMCON_WOL_ENABLE_OVERRIDE BIT13 // WOL Enable Override\r | |
| 698 | #define B_PCH_PMC_GEN_PMCON_DISABLE_SX_STRETCH BIT12 // Disable SLP_X Scretching After SUS Well Power Up\r | |
| 699 | #define B_PCH_PMC_GEN_PMCON_SLP_S3_MAW (BIT11 | BIT10) // SLP_S3# Minimum Assertion Width\r | |
| 700 | #define V_PCH_PMC_GEN_PMCON_SLP_S3_MAW_60US 0x000 // 60 micro seconds\r | |
| 701 | #define V_PCH_PMC_GEN_PMCON_SLP_S3_MAW_1MS 0x400 // 1 milli second\r | |
| 702 | #define V_PCH_PMC_GEN_PMCON_SLP_S3_MAW_50MS 0x800 // 50 milli seconds\r | |
| 703 | #define V_PCH_PMC_GEN_PMCON_SLP_S3_MAW_2S 0xC00 // 2 seconds\r | |
| 704 | #define B_PCH_PMC_GEN_PMCON_GEN_RST_STS BIT9 // General Reset Status\r | |
| 705 | #define B_PCH_PMC_GEN_PMCON_RTC_RESERVED BIT8 // RTC Reserved\r | |
| 706 | #define B_PCH_PMC_GEN_PMCON_SWSMI_RTSL (BIT7 | BIT6) // SWSMI Rate Select\r | |
| 707 | #define V_PCH_PMC_GEN_PMCON_SWSMI_RTSL_64MS 0xC0 // 64ms +/- 4ms\r | |
| 708 | #define V_PCH_PMC_GEN_PMCON_SWSMI_RTSL_32MS 0x80 // 32ms +/- 4ms\r | |
| 709 | #define V_PCH_PMC_GEN_PMCON_SWSMI_RTSL_16MS 0x40 // 16ms +/- 4ms\r | |
| 710 | #define V_PCH_PMC_GEN_PMCON_SWSMI_RTSL_1_5MS 0x00 // 1.5ms +/- 0.6ms\r | |
| 711 | #define B_PCH_PMC_GEN_PMCON_SLP_S4_MAW (BIT5 | BIT4) // SLP_S4# Minimum Assertion Width\r | |
| 712 | #define V_PCH_PMC_GEN_PMCON_SLP_S4_MAW_1S 0x30 // 1 second\r | |
| 713 | #define V_PCH_PMC_GEN_PMCON_SLP_S4_MAW_2S 0x20 // 2 seconds\r | |
| 714 | #define V_PCH_PMC_GEN_PMCON_SLP_S4_MAW_3S 0x10 // 3 seconds\r | |
| 715 | #define V_PCH_PMC_GEN_PMCON_SLP_S4_MAW_4S 0x00 // 4 seconds\r | |
| 716 | #define B_PCH_PMC_GEN_PMCON_SLP_S4_ASE BIT3 // SLP_S4# Assertion Scretch Enable\r | |
| 717 | #define B_PCH_PMC_GEN_PMCON_RTC_PWR_STS BIT2 // RTC Power Status\r | |
| 718 | #define B_PCH_PMC_GEN_PMCON_AFTERG3_EN BIT0 // After G3 State Enable\r | |
| 719 | \r | |
| 720 | #define R_PCH_PMC_GEN_PMCON_2 0x24 // General PM Configuration 2\r | |
| 721 | #define B_PCH_PMC_GEN_PMCON_LOCK_S4_STRET_LD BIT18 // SLP_S3 / SLP_S4 Stretching Policy Lock-Down\r | |
| 722 | #define B_PCH_PMC_GEN_PMCON_BIOS_PCI_EXP_EN BIT10 // BIOS PCI Express Enable\r | |
| 723 | #define B_PCH_PMC_GEN_PMCON_PWRBTN_LVL BIT9 // Power Button Level\r | |
| 724 | #define B_PCH_PMC_GEN_PMCON_SMI_LOCK BIT4 // SMI Lock\r | |
| 725 | #define B_PCH_PMC_GEN_PMCON_PER_SMI_SEL (BIT1 | BIT0) // Period SMI Select\r | |
| 726 | #define V_PCH_PMC_GEN_PMCON_PER_SMI_64S 0x0000 // 64 seconds\r | |
| 727 | #define V_PCH_PMC_GEN_PMCON_PER_SMI_32S 0x0001 // 32 seconds\r | |
| 728 | #define V_PCH_PMC_GEN_PMCON_PER_SMI_16S 0x0002 // 16 seconds\r | |
| 729 | #define V_PCH_PMC_GEN_PMCON_PER_SMI_8S 0x0003 // 8 seconds\r | |
| 730 | \r | |
| 731 | #define R_PCH_PMC_MFPMC 0x28 // Message from PMC\r | |
| 732 | \r | |
| 733 | #define R_PCH_PMC_SEC_STS 0x2C // SEC Status\r | |
| 734 | #define B_PCH_PMC_SEC_STS_SEC (BIT3 | BIT2 | BIT1 | BIT0) // SEC Exclusion Cause\r | |
| 735 | \r | |
| 736 | #define R_PCH_PMC_CRID 0x30 // Configured Revision ID\r | |
| 737 | #define B_PCH_PMC_CRID_RID_SEL (BIT1 | BIT0) // Revision ID Select\r | |
| 738 | \r | |
| 739 | #define R_PCH_PMC_FUNC_DIS 0x34 // Function Disable Register\r | |
| 740 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC7 BIT31 // LPSS2 I2C #7\r | |
| 741 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC6 BIT30 // LPSS2 I2C #6\r | |
| 742 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC5 BIT29 // LPSS2 I2C #5\r | |
| 743 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC4 BIT28 // LPSS2 I2C #4\r | |
| 744 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC3 BIT27 // LPSS2 I2C #3\r | |
| 745 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC2 BIT26 // LPSS2 I2C #2\r | |
| 746 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC1 BIT25 // LPSS2 I2C #1\r | |
| 747 | #define B_PCH_PMC_FUNC_DIS_LPSS2_FUNC0 BIT24 // LPSS2 DMA Disable\r | |
| 748 | #define B_PCH_PMC_FUNC_DIS_PCI_EX_FUNC3 BIT23 // PCI Express Function 3 Disable\r | |
| 749 | #define B_PCH_PMC_FUNC_DIS_PCI_EX_FUNC2 BIT22 // PCI Express Function 2 Disable\r | |
| 750 | #define B_PCH_PMC_FUNC_DIS_PCI_EX_FUNC1 BIT21 // PCI Express Function 1 Disable\r | |
| 751 | #define B_PCH_PMC_FUNC_DIS_PCI_EX_FUNC0 BIT20 // PCI Express Function 0 Disable\r | |
| 752 | #define N_PCH_PMC_FUNC_DIS_PCI_EX_FUNC0 20\r | |
| 753 | #define B_PCH_PMC_FUNC_DIS_SEC BIT19 // SEC Disable\r | |
| 754 | #define B_PCH_PMC_FUNC_DIS_USB BIT18 // USB Disable\r | |
| 755 | #define B_PCH_PMC_FUNC_DIS_SATA BIT17 // SATA Disable\r | |
| 756 | #define B_PCH_PMC_FUNC_DIS_USH BIT15 // USH (USB3) Disable\r | |
| 757 | #define B_PCH_PMC_FUNC_DIS_OTG BIT14 // USB OTG Disable\r | |
| 758 | #define B_PCH_PMC_FUNC_DIS_LPE BIT13 // LPE Disable\r | |
| 759 | #define B_PCH_PMC_FUNC_DIS_AZALIA BIT12 // Azalia Disable\r | |
| 760 | #define B_PCH_PMC_FUNC_DIS_MIPI BIT11 // MIPI-HSI Disable\r | |
| 761 | #define B_PCH_PMC_FUNC_DIS_SDIO4 BIT11 // SCC SDIO #4 (Device 23, eMMC4.5) Disable\r | |
| 762 | #define B_PCH_PMC_FUNC_DIS_SDIO3 BIT10 // SCC SDIO #3 (Device 18, SD Card) Disable\r | |
| 763 | #define B_PCH_PMC_FUNC_DIS_SDIO2 BIT9 // SCC SDIO #2 (Device 17, SDIO) Disable\r | |
| 764 | #define B_PCH_PMC_FUNC_DIS_SDIO1 BIT8 // SCC SDIO #1 (Device 16, eMMC) Disable\r | |
| 765 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC7 BIT7 // LPSS1 Spare #2 Disable\r | |
| 766 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC6 BIT6 // LPSS1 Spare #1 Disable\r | |
| 767 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC5 BIT5 // LPSS1 SPI Disable\r | |
| 768 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC4 BIT4 // LPSS1 HS-UART #2 Disable\r | |
| 769 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC3 BIT3 // LPSS1 HS-UART #1 Disable\r | |
| 770 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC2 BIT2 // LPSS1 PWM #2 Disable\r | |
| 771 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC1 BIT1 // LPSS1 PWM #1 Disable\r | |
| 772 | #define B_PCH_PMC_FUNC_DIS_LPSS1_FUNC0 BIT0 // LPSS1 DMA Disable\r | |
| 773 | \r | |
| 774 | #define R_PCH_PMC_FUNC_DIS2 0x38 // Function Disable 2 Register\r | |
| 775 | #define B_PCH_PMC_FUNC_DIS2_USH_SS_PHY BIT2 // USH Super Speed PHY Disable\r | |
| 776 | #define B_PCH_PMC_FUNC_DIS2_OTG_SS_PHY BIT1 // OTG Super Speed PHY Disable\r | |
| 777 | #define B_PCH_PMC_FUNC_DIS2_SMBUS BIT0 // SMBus Disable\r | |
| 778 | \r | |
| 779 | #define R_PCH_PMC_PMIR 0x48 // Extended Test Mode Register (ETR)\r | |
| 780 | #define B_PCH_PMC_PMIR_CF9LOCK BIT31 // CF9h Lockdown\r | |
| 781 | #define B_PCH_PMC_PMIR_LTR_DEF BIT22 // LTR Default\r | |
| 782 | #define B_PCH_PMC_PMIR_IGNORE_HPET BIT21 // Ignore HPET Disable Check Before Going to S0i2\r | |
| 783 | #define B_PCH_PMC_PMIR_CF9GR BIT20 // CF9h Global Reset\r | |
| 784 | \r | |
| 785 | #define R_PCH_PMC_VLT 0x50 // Voltage Detect Register\r | |
| 786 | #define B_PCH_PMC_VLT_FUSES 0xFF // Voltage Detect Fuses\r | |
| 787 | \r | |
| 788 | #define R_PCH_PMC_GPI_ROUT 0x58 // GPI Rout\r | |
| 789 | #define B_PCH_PMC_GPI_ROUT_0 (BIT1 | BIT0)\r | |
| 790 | #define B_PCH_PMC_GPI_ROUT_1 (BIT3 | BIT2)\r | |
| 791 | #define B_PCH_PMC_GPI_ROUT_2 (BIT5 | BIT4)\r | |
| 792 | #define B_PCH_PMC_GPI_ROUT_3 (BIT7 | BIT6)\r | |
| 793 | #define B_PCH_PMC_GPI_ROUT_4 (BIT9 | BIT8)\r | |
| 794 | #define B_PCH_PMC_GPI_ROUT_5 (BIT11 | BIT10)\r | |
| 795 | #define B_PCH_PMC_GPI_ROUT_6 (BIT13 | BIT12)\r | |
| 796 | #define B_PCH_PMC_GPI_ROUT_7 (BIT15 | BIT14)\r | |
| 797 | #define B_PCH_PMC_GPI_ROUT_8 (BIT17 | BIT16)\r | |
| 798 | #define B_PCH_PMC_GPI_ROUT_9 (BIT19 | BIT18)\r | |
| 799 | #define B_PCH_PMC_GPI_ROUT_10 (BIT21 | BIT20)\r | |
| 800 | #define B_PCH_PMC_GPI_ROUT_11 (BIT23 | BIT22)\r | |
| 801 | #define B_PCH_PMC_GPI_ROUT_12 (BIT25 | BIT24)\r | |
| 802 | #define B_PCH_PMC_GPI_ROUT_13 (BIT27 | BIT26)\r | |
| 803 | #define B_PCH_PMC_GPI_ROUT_14 (BIT29 | BIT28)\r | |
| 804 | #define B_PCH_PMC_GPI_ROUT_15 (BIT31 | BIT30)\r | |
| 805 | \r | |
| 806 | #define R_PCH_PMC_PCC0 0x60 // Platform Clock Control 0\r | |
| 807 | #define B_PCH_PMC_PCC0_CLK_FREQ BIT2 // Clock Frequency\r | |
| 808 | #define B_PCH_PMC_PCC0_CLK_CTL (BIT1 | BIT0) // Clock Gating\r | |
| 809 | \r | |
| 810 | #define R_PCH_PMC_PCC1 0x64 // Platform Clock Control 1\r | |
| 811 | #define B_PCH_PMC_PCC1_CLK_FREQ BIT2 // Clock Frequency\r | |
| 812 | #define B_PCH_PMC_PCC1_CLK_CTL (BIT1 | BIT0) // Clock Gating\r | |
| 813 | \r | |
| 814 | #define R_PCH_PMC_PCC2 0x68 // Platform Clock Control 2\r | |
| 815 | #define B_PCH_PMC_PCC2_CLK_FREQ BIT2 // Clock Frequency\r | |
| 816 | #define B_PCH_PMC_PCC2_CLK_CTL (BIT1 | BIT0) // Clock Gating\r | |
| 817 | \r | |
| 818 | #define R_PCH_PMC_PCC3 0x6C // Platform Clock Control 3\r | |
| 819 | #define B_PCH_PMC_PCC3_CLK_FREQ BIT2 // Clock Frequency\r | |
| 820 | #define B_PCH_PMC_PCC3_CLK_CTL (BIT1 | BIT0) // Clock Gating\r | |
| 821 | \r | |
| 822 | #define R_PCH_PMC_PCC4 0x70 // Platform Clock Control 4\r | |
| 823 | #define B_PCH_PMC_PCC4_CLK_FREQ BIT2 // Clock Frequency\r | |
| 824 | #define B_PCH_PMC_PCC4_CLK_CTL (BIT1 | BIT0) // Clock Gating\r | |
| 825 | \r | |
| 826 | #define R_PCH_PMC_PCC5 0x74 // Platform Clock Control 5\r | |
| 827 | #define B_PCH_PMC_PCC5_CLK_FREQ BIT2 // Clock Frequency\r | |
| 828 | #define B_PCH_PMC_PCC5_CLK_CTL (BIT1 | BIT0) // Clock Gating\r | |
| 829 | \r | |
| 830 | #define R_PCH_PMC_S0IR_TMR 0x80 // S0I Ready Residency Timer\r | |
| 831 | #define B_PCH_PMC_S0IR_TMR_RTIME 0xFFFFFFFF // Time Spent in S0I Ready State\r | |
| 832 | \r | |
| 833 | #define R_PCH_PMC_S0I1_TMR 0x84 // S0I1 Ready Residency Timer\r | |
| 834 | #define B_PCH_PMC_S0I1_TMR_RTIME 0xFFFFFFFF // Time Spent in S0I1 Ready State\r | |
| 835 | \r | |
| 836 | #define R_PCH_PMC_S0I2_TMR 0x88 // S0I2 Ready Residency Timer\r | |
| 837 | #define B_PCH_PMC_S0I2_TMR_RTIME 0xFFFFFFFF // Time Spent in S0I2 Ready State\r | |
| 838 | \r | |
| 839 | #define R_PCH_PMC_S0I3_TMR 0x8C // S0I3 Ready Residency Timer\r | |
| 840 | #define B_PCH_PMC_S0I3_TMR_RTIME 0xFFFFFFFF // Time Spent in S0I3 Ready State\r | |
| 841 | \r | |
| 842 | #define R_PCH_PMC_S0_TMR 0x90 // S0 Residency Timer\r | |
| 843 | #define B_PCH_PMC_S0_TMR_RTIME 0xFFFFFFFF // Time Spent in S0 State\r | |
| 844 | \r | |
| 845 | #define R_PCH_PMC_PSS 0x98 // Power Island Power Status\r | |
| 846 | #define B_PCH_PMC_PSS_PG_STS 0x3FFFF // Power Gate Status of All Power Islands\r | |
| 847 | #define B_PCH_PMC_PSS_PG_STS_USB_SUS BIT17 // USB SUS\r | |
| 848 | #define B_PCH_PMC_PSS_PG_STS_USB BIT16 // USB\r | |
| 849 | #define B_PCH_PMC_PSS_PG_STS_OTG_VCCACLK BIT15 // OTG VCCACLK\r | |
| 850 | #define B_PCH_PMC_PSS_PG_STS_OTG VCCA BIT14 // OTG VCCA\r | |
| 851 | #define B_PCH_PMC_PSS_PG_STS_OTG_VCCS BIT13 // OTG VCCS\r | |
| 852 | #define B_PCH_PMC_PSS_PG_STS_OTG_CTL BIT12 // OTG Control\r | |
| 853 | #define B_PCH_PMC_PSS_PG_STS_USH_VCCA BIT11 // USH VCCA\r | |
| 854 | #define B_PCH_PMC_PSS_PG_STS_USH_VCCS BIT10 // USH VCCS\r | |
| 855 | #define B_PCH_PMC_PSS_PG_STS_USH_SUS BIT9 // USH SUS\r | |
| 856 | #define B_PCH_PMC_PSS_PG_STS_USH_CTL BIT8 // USH Control\r | |
| 857 | #define B_PCH_PMC_PSS_PG_STS_DFX BIT7 // DFX\r | |
| 858 | #define B_PCH_PMC_PSS_PG_STS_LPE BIT6 // LPE Audio\r | |
| 859 | #define B_PCH_PMC_PSS_PG_STS_LPSS BIT5 // LPSS\r | |
| 860 | #define B_PCH_PMC_PSS_PG_STS_PCIE BIT4 // PCIe\r | |
| 861 | #define B_PCH_PMC_PSS_PG_STS_HDA BIT2 // HDA\r | |
| 862 | #define B_PCH_PMC_PSS_PG_STS_SATA BIT1 // SATA\r | |
| 863 | \r | |
| 864 | #define R_PCH_PMC_D3_STS_0 0xA0 // D3 Status 0\r | |
| 865 | #define B_PCH_PMC_D3_STS_0_LPSS1F7 BIT31 // LPSS 1 Function 7\r | |
| 866 | #define B_PCH_PMC_D3_STS_0_LPSS1F6 BIT30 // LPSS 1 Function 6\r | |
| 867 | #define B_PCH_PMC_D3_STS_0_LPSS1F5 BIT29 // LPSS 1 Function 5\r | |
| 868 | #define B_PCH_PMC_D3_STS_0_LPSS1F4 BIT28 // LPSS 1 Function 4\r | |
| 869 | #define B_PCH_PMC_D3_STS_0_LPSS1F3 BIT27 // LPSS 1 Function 3\r | |
| 870 | #define B_PCH_PMC_D3_STS_0_LPSS1F2 BIT26 // LPSS 1 Function 2\r | |
| 871 | #define B_PCH_PMC_D3_STS_0_LPSS1F1 BIT25 // LPSS 1 Function 1\r | |
| 872 | #define B_PCH_PMC_D3_STS_0_LPSS1F0 BIT24 // LPSS 1 Function 0\r | |
| 873 | #define B_PCH_PMC_D3_STS_0_PCIEF3 BIT23 // PCIe Function 3\r | |
| 874 | #define B_PCH_PMC_D3_STS_0_PCIEF2 BIT22 // PCIe Function 2\r | |
| 875 | #define B_PCH_PMC_D3_STS_0_PCIEF1 BIT21 // PCIe Function 1\r | |
| 876 | #define B_PCH_PMC_D3_STS_0_PCIEF0 BIT20 // PCIe Function 0\r | |
| 877 | #define B_PCH_PMC_D3_STS_0_USB BIT18 // USB\r | |
| 878 | #define B_PCH_PMC_D3_STS_0_SATA BIT17 // SATA\r | |
| 879 | #define B_PCH_PMC_D3_STS_0_USH BIT15 // USH\r | |
| 880 | #define B_PCH_PMC_D3_STS_0_OTG BIT14 // OTG\r | |
| 881 | #define B_PCH_PMC_D3_STS_0_LPE BIT13 // LPE\r | |
| 882 | #define B_PCH_PMC_D3_STS_0_HDA BIT12 // HDA\r | |
| 883 | #define B_PCH_PMC_D3_STS_0_MIPI BIT11 // MIPI-HSI\r | |
| 884 | #define B_PCH_PMC_D3_STS_0_SCCF2 BIT10 // SCC Function 2\r | |
| 885 | #define B_PCH_PMC_D3_STS_0_SCCF1 BIT9 // SCC Function 1\r | |
| 886 | #define B_PCH_PMC_D3_STS_0_SCCF0 BIT8 // SCC Function 0\r | |
| 887 | #define B_PCH_PMC_D3_STS_0_LPSS0F7 BIT7 // LPSS 0 Function 7\r | |
| 888 | #define B_PCH_PMC_D3_STS_0_LPSS0F6 BIT6 // LPSS 0 Function 6\r | |
| 889 | #define B_PCH_PMC_D3_STS_0_LPSS0F5 BIT5 // LPSS 0 Function 5\r | |
| 890 | #define B_PCH_PMC_D3_STS_0_LPSS0F4 BIT4 // LPSS 0 Function 4\r | |
| 891 | #define B_PCH_PMC_D3_STS_0_LPSS0F3 BIT3 // LPSS 0 Function 3\r | |
| 892 | #define B_PCH_PMC_D3_STS_0_LPSS0F2 BIT2 // LPSS 0 Function 2\r | |
| 893 | #define B_PCH_PMC_D3_STS_0_LPSS0F1 BIT1 // LPSS 0 Function 1\r | |
| 894 | #define B_PCH_PMC_D3_STS_0_LPSS0F0 BIT0 // LPSS 0 Function 0\r | |
| 895 | \r | |
| 896 | #define R_PCH_PMC_D3_STS_1 0xA4 // D3 Status 1\r | |
| 897 | #define B_PCH_PMC_D3_STS_1_DFX BIT3 // DFX\r | |
| 898 | #define B_PCH_PMC_D3_STS_1_OTG_SS BIT2 // OTG SS\r | |
| 899 | #define B_PCH_PMC_D3_STS_1_USH_SS BIT1 // USH SS\r | |
| 900 | #define B_PCH_PMC_D3_STS_1_SMB BIT0 // SMBus\r | |
| 901 | #define R_PCH_PMC_D3_STDBY_STS_0 0xA8 // D3 Standby Status 0\r | |
| 902 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F7 BIT31 // LPSS 1 Function 7\r | |
| 903 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F6 BIT30 // LPSS 1 Function 6\r | |
| 904 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F5 BIT29 // LPSS 1 Function 5\r | |
| 905 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F4 BIT28 // LPSS 1 Function 4\r | |
| 906 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F3 BIT27 // LPSS 1 Function 3\r | |
| 907 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F2 BIT26 // LPSS 1 Function 2\r | |
| 908 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F1 BIT25 // LPSS 1 Function 1\r | |
| 909 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS1F0 BIT24 // LPSS 1 Function 0\r | |
| 910 | #define B_PCH_PMC_D3_STDBY_STS_0_PCIEF3 BIT23 // PCIe Function 3\r | |
| 911 | #define B_PCH_PMC_D3_STDBY_STS_0_PCIEF2 BIT22 // PCIe Function 2\r | |
| 912 | #define B_PCH_PMC_D3_STDBY_STS_0_PCIEF1 BIT21 // PCIe Function 1\r | |
| 913 | #define B_PCH_PMC_D3_STDBY_STS_0_PCIEF0 BIT20 // PCIe Function 0\r | |
| 914 | #define B_PCH_PMC_D3_STDBY_STS_0_USB BIT18 // USB\r | |
| 915 | #define B_PCH_PMC_D3_STDBY_STS_0_SATA BIT17 // SATA\r | |
| 916 | #define B_PCH_PMC_D3_STDBY_STS_0_USH BIT15 // USH\r | |
| 917 | #define B_PCH_PMC_D3_STDBY_STS_0_OTG BIT14 // OTG\r | |
| 918 | #define B_PCH_PMC_D3_STDBY_STS_0_LPE BIT13 // LPE\r | |
| 919 | #define B_PCH_PMC_D3_STDBY_STS_0_HDA BIT12 // HDA\r | |
| 920 | #define B_PCH_PMC_D3_STDBY_STS_0_MIPI BIT11 // MIPI-HSI\r | |
| 921 | #define B_PCH_PMC_D3_STDBY_STS_0_SCCF2 BIT10 // SCC Function 2\r | |
| 922 | #define B_PCH_PMC_D3_STDBY_STS_0_SCCF1 BIT9 // SCC Function 1\r | |
| 923 | #define B_PCH_PMC_D3_STDBY_STS_0_SCCF0 BIT8 // SCC Function 0\r | |
| 924 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F7 BIT7 // LPSS 0 Function 7\r | |
| 925 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F6 BIT6 // LPSS 0 Function 6\r | |
| 926 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F5 BIT5 // LPSS 0 Function 5\r | |
| 927 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F4 BIT4 // LPSS 0 Function 4\r | |
| 928 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F3 BIT3 // LPSS 0 Function 3\r | |
| 929 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F2 BIT2 // LPSS 0 Function 2\r | |
| 930 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F1 BIT1 // LPSS 0 Function 1\r | |
| 931 | #define B_PCH_PMC_D3_STDBY_STS_0_LPSS0F0 BIT0 // LPSS 0 Function 0\r | |
| 932 | \r | |
| 933 | #define R_PCH_PMC_D3_STDBY_STS_1 0xAC // D3 Standby Status 1\r | |
| 934 | #define B_PCH_PMC_D3_STDBY_STS_1_DFX BIT3 // DFX\r | |
| 935 | #define B_PCH_PMC_D3_STDBY_STS_1_OTG_SS BIT2 // OTG SS\r | |
| 936 | #define B_PCH_PMC_D3_STDBY_STS_1_USH_SS BIT1 // USH SS\r | |
| 937 | #define B_PCH_PMC_D3_STDBY_STS_1_SMB BIT0 // SMBus\r | |
| 938 | \r | |
| 939 | #define R_PCH_PMC_MTPMC1 0xB0 // Message to PMC 1\r | |
| 940 | \r | |
| 941 | #define R_PCH_PMC_MTPMC2 0xB4 // Message to PMC 2\r | |
| 942 | \r | |
| 943 | #define R_PCH_PMC_MTPMC3 0xB8 // Message to PMC 3\r | |
| 944 | \r | |
| 945 | #define R_PCH_PMC_MTPMC4 0xBC // Message to PMC 4\r | |
| 946 | \r | |
| 947 | //\r | |
| 948 | // IO Memory Space Registers (IOBASE)\r | |
| 949 | //\r | |
| 950 | #define R_PCH_CFIO_PAD_CONF0 0x00 // CFIO PAD_CONF0\r | |
| 951 | #define R_PCH_CFIO_PAD_CONF1 0x04 // CFIO PAD_CONF1\r | |
| 952 | #define R_PCH_CFIO_PAD_VAL 0x08 // CFIO PAD_VAL\r | |
| 953 | #define R_PCH_CFIO_PAD_DFT 0x0C // CFIO PAD_CFT\r | |
| 954 | \r | |
| 955 | //\r | |
| 956 | // GPIO Register Offsets from GBASE\r | |
| 957 | //\r | |
| 958 | #define R_PCH_GPIO_SC_USE_SEL 0x00 // GPIO South Usage Select [31:0]\r | |
| 959 | #define R_PCH_GPIO_SC_IO_SEL 0x04 // GPIO South Input / Output Select [31:0]\r | |
| 960 | #define R_PCH_GPIO_SC_LVL 0x08 // GPIO South Level for Input or Output [31:0]\r | |
| 961 | \r | |
| 962 | #define R_PCH_GPIO_SC_TPE 0x0C // GPIO South Trigger Positive Edge Enable [31:0]\r | |
| 963 | #define R_PCH_GPIO_SC_TNE 0x10 // GPIO South Trigger Negative Edge Enable [31:0]\r | |
| 964 | #define R_PCH_GPIO_SC_TS 0x14 // GPIO South Trigger Status [31:0]\r | |
| 965 | \r | |
| 966 | #define R_PCH_GPIO_SC_USE_SEL2 0x20 // GPIO South Usage Select 2 [63:32]\r | |
| 967 | #define R_PCH_GPIO_SC_IO_SEL2 0x24 // GPIO South Input / Output Select 2 [63:32]\r | |
| 968 | #define R_PCH_GPIO_SC_LVL2 0x28 // GPIO South Level for Input or Output 2 [63:32]\r | |
| 969 | \r | |
| 970 | #define R_PCH_GPIO_SC_TPE2 0x2C // GPIO South Trigger Positive Edge Enable 2 [63:32]\r | |
| 971 | #define R_PCH_GPIO_SC_TNE2 0x30 // GPIO South Trigger Negative Edge Enable 2 [63:32]\r | |
| 972 | #define R_PCH_GPIO_SC_TS2 0x34 // GPIO South Trigger Status 2 [63:32]\r | |
| 973 | \r | |
| 974 | #define R_PCH_GPIO_SC_USE_SEL3 0x40 // GPIO South Usage Select 3 [95:64]\r | |
| 975 | #define R_PCH_GPIO_SC_IO_SEL3 0x44 // GPIO South Input / Output Select 3 [95:64]\r | |
| 976 | #define R_PCH_GPIO_SC_LVL3 0x48 // GPIO South Level for Input or Output 3 [95:64]\r | |
| 977 | \r | |
| 978 | #define R_PCH_GPIO_SC_TPE3 0x4C // GPIO South Trigger Positive Edge Enable 3 [95:64]\r | |
| 979 | #define R_PCH_GPIO_SC_TNE3 0x50 // GPIO South Trigger Negative Edge Enable 3 [95:64]\r | |
| 980 | #define R_PCH_GPIO_SC_TS3 0x54 // GPIO South Trigger Status 3 [95:64]\r | |
| 981 | \r | |
| 982 | #define R_PCH_GPIO_SC_USE_SEL4 0x60 // GPIO South Usage Select 4 [127:96]\r | |
| 983 | #define R_PCH_GPIO_SC_IO_SEL4 0x64 // GPIO South Input / Output Select 4 [127:96]\r | |
| 984 | #define R_PCH_GPIO_SC_LVL4 0x68 // GPIO South Level for Input or Output 4 [127:96]\r | |
| 985 | \r | |
| 986 | #define R_PCH_GPIO_SC_TPE4 0x6C // GPIO South Trigger Positive Edge Enable 4 [127:96]\r | |
| 987 | #define R_PCH_GPIO_SC_TNE4 0x70 // GPIO South Trigger Negative Edge Enable 4 [127:96]\r | |
| 988 | #define R_PCH_GPIO_SC_TS4 0x74 // GPIO South Trigger Status 4 [127:96]\r | |
| 989 | \r | |
| 990 | #define R_PCH_GPIO_SUS_USE_SEL 0x80 // GPIO Suspend Use Select [31:0]\r | |
| 991 | #define R_PCH_GPIO_SUS_IO_SEL 0x84 // GPIO Suspend Input / Output Select [31:0]\r | |
| 992 | #define R_PCH_GPIO_SUS_LVL 0x88 // GPIO Suspend Level for Input or Output [31:0]\r | |
| 993 | \r | |
| 994 | #define R_PCH_GPIO_SUS_TPE 0x8C // GPIO Suspend Trigger Positive Edge Enable [31:0]\r | |
| 995 | #define R_PCH_GPIO_SUS_TNE 0x90 // GPIO Suspend Trigger Negative Edge Enable [31:0]\r | |
| 996 | #define R_PCH_GPIO_SUS_TS 0x94 // GPIO Suspend Trigger Status [31:0]\r | |
| 997 | \r | |
| 998 | #define R_PCH_GPIO_SUS_WAKE_EN 0x98 // GPIO Suspend Wake Enable [31:0]\r | |
| 999 | \r | |
| 1000 | #define R_PCH_GPIO_SUS_USE_SEL2 0x100 // GPIO Suspend Use Select 2 [42:32]\r | |
| 1001 | #define R_PCH_GPIO_SUS_IO_SEL2 0x104 // GPIO Suspend Input / Output Select 2 [42:32]\r | |
| 1002 | #define R_PCH_GPIO_SUS_LVL2 0x108 // GPIO Suspend Level for Input or Output 2 [42:32]\r | |
| 1003 | \r | |
| 1004 | #define R_PCH_GPIO_SUS_TPE2 0x10C // GPIO Suspend Trigger Positive Edge Enable [42:32]\r | |
| 1005 | #define R_PCH_GPIO_SUS_TNE2 0x110 // GPIO Suspend Trigger Negative Edge Enable [42:32]\r | |
| 1006 | #define R_PCH_GPIO_SUS_TS2 0x114 // GPIO Suspend Trigger Status [42:32]\r | |
| 1007 | \r | |
| 1008 | #define R_PCH_GPIO_SUS_WAKE_EN2 0x118 // GPIO Suspend Wake Enable 2 [42:32]\r | |
| 1009 | \r | |
| 1010 | //\r | |
| 1011 | // Fixed IO Space\r | |
| 1012 | //\r | |
| 1013 | \r | |
| 1014 | //\r | |
| 1015 | // Processor Interface Registers\r | |
| 1016 | //\r | |
| 1017 | #define R_PCH_NMI_SC 0x61 // NMI Status and Control\r | |
| 1018 | #define B_PCH_NMI_SC_SERR_NMI_STS BIT7 // SERR# NMI Status\r | |
| 1019 | #define B_PCH_NMI_SC_IOCHK_NMI_STS BIT6 // IOCHK NMI Status\r | |
| 1020 | #define B_PCH_NMI_SC_TMR2_OUT_STS BIT5 // Timer Counter 2 Status\r | |
| 1021 | #define B_PCH_NMI_SC_REF_TOGGLE BIT4 // Refresh Cycle toggle Status\r | |
| 1022 | #define B_PCH_NMI_SC_IOCHK_NMI_EN BIT3 // IOCHK NMI Enable\r | |
| 1023 | #define B_PCH_NMI_SC_PCI_SERR_EN BIT2 // SERR# NMI Enable\r | |
| 1024 | #define B_PCH_NMI_SC_SPKR_DAT_EN BIT1 // Speaker Data Enable\r | |
| 1025 | #define B_PCH_NMI_SC_TIM_CNT2_EN BIT0 // Timer Counter 2 Enable\r | |
| 1026 | \r | |
| 1027 | #define R_PCH_NMI_EN 0x70 // NMI Enable and Real Time Clock Index, Co-function with R_PCH_RTC_INDEX\r | |
| 1028 | #define B_PCH_NMI_EN_NMI_EN BIT7 // NMI Enable, must preserve this bit first before writing to IO port 0x70\r | |
| 1029 | \r | |
| 1030 | //\r | |
| 1031 | // RTC Registers\r | |
| 1032 | //\r | |
| 1033 | #define R_PCH_RTC_INDEX 0x70 // NMI Enable and Real Time Clock Index, Co-function with R_PCH_NMI_EN\r | |
| 1034 | #define R_PCH_RTC_TARGET 0x71 // Real-Time Clock Target Register\r | |
| 1035 | #define R_PCH_RTC_EXT_INDEX 0x72 // Extended RAM Index Register\r | |
| 1036 | #define R_PCH_RTC_EXT_TARGET 0x73 // Extended RAM Target Register\r | |
| 1037 | #define R_PCH_RTC_INDEX2 0x74 // Real-Time Clock Index Register\r | |
| 1038 | #define R_PCH_RTC_TARGET2 0x75 // Real-Time Clock Target Register\r | |
| 1039 | #define R_PCH_RTC_EXT_INDEX2 0x76 // Extended RAM Index Register\r | |
| 1040 | #define R_PCH_RTC_EXT_TARGET2 0x77 // Extended RAM Target Register\r | |
| 1041 | \r | |
| 1042 | #define R_PCH_RTC_SECONDS 0x00 // Seconds, Range 0..59\r | |
| 1043 | #define R_PCH_RTC_SECONDSALARM 0x01 // Seconds Alarm, Range 0..59\r | |
| 1044 | #define R_PCH_RTC_MINUTES 0x02 // Minutes, Range 0..59\r | |
| 1045 | #define R_PCH_RTC_MINUTESALARM 0x03 // Minutes Alarm, Range 0..59\r | |
| 1046 | #define R_PCH_RTC_HOURS 0x04 // Hours, Range 1..12 or 0..23 Bit 7 is AM/PM\r | |
| 1047 | #define R_PCH_RTC_HOURSALARM 0x05 // Hours Alarm, Range 1..12 or 0..23 Bit 7 is AM/PM\r | |
| 1048 | #define R_PCH_RTC_DAYOFWEEK 0x06 // Day of Week, Range 1..7\r | |
| 1049 | #define R_PCH_RTC_DAYOFMONTH 0x07 // Day of Month, Range 1..31\r | |
| 1050 | #define R_PCH_RTC_MONTH 0x08 // Month, Range 1..12\r | |
| 1051 | #define R_PCH_RTC_YEAR 0x09 // Year, Range 0..99\r | |
| 1052 | \r | |
| 1053 | #define R_PCH_RTC_REGISTERA 0x0A // RTC Register A\r | |
| 1054 | #define B_PCH_RTC_REGISTERA_UIP BIT7 // Update In Progress\r | |
| 1055 | #define B_PCH_RTC_REGISTERA_DV (BIT6 | BIT5 | BIT4) // Division Chain Select\r | |
| 1056 | #define V_PCH_RTC_REGISTERA_DV_NORM_OP 0x20 // Normal Operation\r | |
| 1057 | #define V_PCH_RTC_REGISTERA_DV_BYP_5 0x30 // Bypass 5 Stages (Test mode only)\r | |
| 1058 | #define V_PCH_RTC_REGISTERA_DV_BYP_10 0x40 // Bypass 10 Stages (Test mode only)\r | |
| 1059 | #define V_PCH_RTC_REGISTERA_DV_BYP_15 0x50 // Bypass 15 Stages (Test mode only)\r | |
| 1060 | #define V_PCH_RTC_REGISTERA_DV_DIV_RST1 0x60 // Divider Reset\r | |
| 1061 | #define V_PCH_RTC_REGISTERA_DV_DIV_RST2 0x70 // Divider Reset\r | |
| 1062 | #define B_PCH_RTC_REGISTERA_RS (BIT3 | BIT2 | BIT1 | BIT0) // Rate Select\r | |
| 1063 | #define V_PCH_RTC_REGISTERA_RS_INT_NV_TGL 0x00 // Interrupt Never Toggles\r | |
| 1064 | #define V_PCH_RTC_REGISTERA_RS_3P906MS1 0x01 // 3.90625 ms\r | |
| 1065 | #define V_PCH_RTC_REGISTERA_RS_7P812MS1 0x02 // 7.8125 ms\r | |
| 1066 | #define V_PCH_RTC_REGISTERA_RS_122P0US 0x03 // 122.070 us\r | |
| 1067 | #define V_PCH_RTC_REGISTERA_RS_244P1US 0x04 // 244.141 us\r | |
| 1068 | #define V_PCH_RTC_REGISTERA_RS_488P2US 0x05 // 488.281 us\r | |
| 1069 | #define V_PCH_RTC_REGISTERA_RS_976P5US 0x06 // 976.5625 us\r | |
| 1070 | #define V_PCH_RTC_REGISTERA_RS_1P953MS 0x07 // 1.953125 ms\r | |
| 1071 | #define V_PCH_RTC_REGISTERA_RS_3P906MS 0x08 // 3.90625 ms\r | |
| 1072 | #define V_PCH_RTC_REGISTERA_RS_7P812MS 0x09 // 7.8125 ms\r | |
| 1073 | #define V_PCH_RTC_REGISTERA_RS_15P62MS 0x0A // 15.625 ms\r | |
| 1074 | #define V_PCH_RTC_REGISTERA_RS_31P25MS 0x0B // 31.25 ms\r | |
| 1075 | #define V_PCH_RTC_REGISTERA_RS_62P5MS 0x0C // 62.5 ms\r | |
| 1076 | #define V_PCH_RTC_REGISTERA_RS_125MS 0x0D // 125 ms\r | |
| 1077 | #define V_PCH_RTC_REGISTERA_RS_250MS 0x0E // 250 ms\r | |
| 1078 | #define V_PCH_RTC_REGISTERA_RS_500MS 0x0F // 500 ms\r | |
| 1079 | \r | |
| 1080 | #define R_PCH_RTC_REGISTERB 0x0B // RTC Register B\r | |
| 1081 | #define B_PCH_RTC_REGISTERB_SET BIT7 // Update Cycle Inhibit 1: Stop auto update, begin set value; 0: Update cycle occurs\r | |
| 1082 | #define B_PCH_RTC_REGISTERB_PIE BIT6 // Periodic Interrupt Enable\r | |
| 1083 | #define B_PCH_RTC_REGISTERB_AIE BIT5 // Alarm Interrupt Enable\r | |
| 1084 | #define B_PCH_RTC_REGISTERB_UIE BIT4 // Update-ended Interrupt Enable\r | |
| 1085 | #define B_PCH_RTC_REGISTERB_SQWE BIT3 // Square Wave Enable (Not implemented)\r | |
| 1086 | #define B_PCH_RTC_REGISTERB_DM BIT2 // Data Mode 1: Binary; 0:BCD\r | |
| 1087 | #define B_PCH_RTC_REGISTERB_HF BIT1 // Hour Format 1: 24 mode; 0: 12 mode.\r | |
| 1088 | #define B_PCH_RTC_REGISTERB_DSE BIT0 // Daylight Savings Enable (Not Implemented)\r | |
| 1089 | \r | |
| 1090 | #define R_PCH_RTC_REGISTERC 0x0C // RTC Register C\r | |
| 1091 | #define B_PCH_RTC_REGISTERC_IRQF BIT7 // Interrupt Request Flag\r | |
| 1092 | #define B_PCH_RTC_REGISTERC_PF BIT6 // Periodic Interrupt Flag\r | |
| 1093 | #define B_PCH_RTC_REGISTERC_AF BIT5 // Alarm Flag\r | |
| 1094 | #define B_PCH_RTC_REGISTERC_UF BIT4 // Update-ended Flag\r | |
| 1095 | #define B_PCH_RTC_REGISTERC_RESERVED (BIT3 | BIT2 | BIT1 | BIT0)\r | |
| 1096 | \r | |
| 1097 | #define R_PCH_RTC_REGISTERD 0x0D // RTC Register D\r | |
| 1098 | #define B_PCH_RTC_REGISTERD_VRT BIT7 // Valid RAM and Time Bit\r | |
| 1099 | #define B_PCH_RTC_REGISTERD_RESERVED BIT6\r | |
| 1100 | #define B_PCH_RTC_REGISTERD_DA 0x3F // Date Alarm\r | |
| 1101 | \r | |
| 1102 | #define B_PCH_RTC_CENTURY 0x32 // Century Data\r | |
| 1103 | \r | |
| 1104 | //\r | |
| 1105 | // APM Registers\r | |
| 1106 | //\r | |
| 1107 | #define R_PCH_APM_CNT 0xB2 // Advanced Power Management Control Port\r | |
| 1108 | #define R_PCH_APM_STS 0xB3 // Advanced Power Management Status Port\r | |
| 1109 | \r | |
| 1110 | //\r | |
| 1111 | // INIT Register\r | |
| 1112 | //\r | |
| 1113 | #define R_PCH_PORT92 0x92\r | |
| 1114 | #define B_PCH_PORT92_ALT_A20_GATE BIT1 // Alternate A20 Gate\r | |
| 1115 | #define B_PCH_PORT92_INIT_NOW BIT0 // Init Now\r | |
| 1116 | \r | |
| 1117 | //\r | |
| 1118 | // PCU UART\r | |
| 1119 | //\r | |
| 1120 | #define R_PCH_COM1_BASE 0x3F8 // COM1 IO BASE\r | |
| 1121 | \r | |
| 1122 | //\r | |
| 1123 | // Reset Control Register\r | |
| 1124 | //\r | |
| 1125 | #define R_PCH_RST_CNT 0xCF9 // Reset Control\r | |
| 1126 | #define B_PCH_RST_CNT_FULL_RST BIT3\r | |
| 1127 | #define B_PCH_RST_CNT_RST_CPU BIT2\r | |
| 1128 | #define B_PCH_RST_CNT_SYS_RST BIT1\r | |
| 1129 | #define V_PCH_RST_CNT_FULLRESET 0x0E\r | |
| 1130 | #define V_PCH_RST_CNT_HARDRESET 0x06\r | |
| 1131 | #define V_PCH_RST_CNT_SOFTRESET 0x04 // Not supported by VLV\r | |
| 1132 | #define V_PCH_RST_CNT_HARDSTARTSTATE 0x02\r | |
| 1133 | #define V_PCH_RST_CNT_SOFTSTARTSTATE 0x00\r | |
| 1134 | \r | |
| 1135 | //\r | |
| 1136 | // Fixed Memory Region\r | |
| 1137 | //\r | |
| 1138 | \r | |
| 1139 | //\r | |
| 1140 | // IO APIC Registers\r | |
| 1141 | //\r | |
| 1142 | #define R_PCH_IO_APIC_INDEX 0xFEC00000 // IOAPIC Index Register, 8bit\r | |
| 1143 | #define R_PCH_IO_APIC_WINDOW 0xFEC00010 // IOAPIC Window Register, 32bit\r | |
| 1144 | #define R_PCH_IO_APIC_EOI 0xFEC00040 // IOAPIC EOI Register, 8bit\r | |
| 1145 | \r | |
| 1146 | #define R_PCH_IO_APIC_ID 0x00 // Identification\r | |
| 1147 | #define B_PCH_IO_APIC_ID_AID (BIT27 | BIT26 | BIT25 | BIT24) // APIC Identification\r | |
| 1148 | \r | |
| 1149 | #define R_PCH_IO_APIC_VS 0x01 // Version\r | |
| 1150 | #define B_PCH_IO_APIC_VS_MRE 0xFF0000 // Maximum Redirection Entries\r | |
| 1151 | #define B_PCH_IO_APIC_VS_PRQ BIT15 // Pin Assertion Register Supported\r | |
| 1152 | #define B_PCH_IO_APIC_VS_VS 0xFF // Version\r | |
| 1153 | \r | |
| 1154 | //\r | |
| 1155 | // HPET Registers\r | |
| 1156 | //\r | |
| 1157 | #define R_PCH_PCH_HPET 0xFED00000 // HPET Base Address\r | |
| 1158 | \r | |
| 1159 | #define R_PCH_PCH_HPET_GCID 0x00 // HPET General Capabilities and ID, 64bit\r | |
| 1160 | #define B_PCH_PCH_HPET_GCID_CTP 0xFFFFFFFF00000000 // Counter Tick Period\r | |
| 1161 | #define B_PCH_PCH_HPET_GCID_VID 0xFFFF0000 // Vendor ID\r | |
| 1162 | #define B_PCH_PCH_HPET_GCID_LRC BIT15 // Legacy Rout Capable\r | |
| 1163 | #define B_PCH_PCH_HPET_GCID_CS BIT13 // Counter Size\r | |
| 1164 | #define B_PCH_PCH_HPET_GCID_NT 0x1F00 // Number of Timers\r | |
| 1165 | #define B_PCH_PCH_HPET_GCID_RID 0xFF // Revision ID\r | |
| 1166 | #define N_PCH_HPET_ADDR_ASEL 12\r | |
| 1167 | \r | |
| 1168 | #define R_PCH_PCH_HPET_GCFG 0x10 // HPET General Configuration\r | |
| 1169 | #define B_PCH_PCH_HPET_GCFG_LRE BIT1 // Legacy Rout Enable\r | |
| 1170 | #define B_PCH_PCH_HPET_GCFG_EN BIT0 // Overall Enable\r | |
| 1171 | \r | |
| 1172 | #define R_PCH_PCH_HPET_GIS 0x20 // HPET General Interrupt Status\r | |
| 1173 | #define B_PCH_PCH_HPET_GIS_T2 BIT2 // Timer 2 Status\r | |
| 1174 | #define B_PCH_PCH_HPET_GIS_T1 BIT1 // Timer 1 Status\r | |
| 1175 | #define B_PCH_PCH_HPET_GIS_T0 BIT0 // Timer 0 Status\r | |
| 1176 | \r | |
| 1177 | #define R_PCH_PCH_HPET_MCV 0xF0 // HPET Main Counter Value, 64bit\r | |
| 1178 | \r | |
| 1179 | #define R_PCH_PCH_HPET_T0C 0x100 // HPET Timer 0 Config and Capabilities\r | |
| 1180 | #define R_PCH_PCH_HPET_T0CV_L 0x108 // HPET Timer 0 Lower Comparator Value\r | |
| 1181 | #define R_PCH_PCH_HPET_T0CV_H 0x10C // HPET Timer 0 Upper Comparator Value\r | |
| 1182 | \r | |
| 1183 | #define R_PCH_PCH_HPET_T1C 0x120 // HPET Timer 1 Config and Capabilities\r | |
| 1184 | #define R_PCH_PCH_HPET_T1CV 0x128 // HPET Timer 1 Comparator Value\r | |
| 1185 | \r | |
| 1186 | #define R_PCH_PCH_HPET_T2C 0x140 // HPET Timer 2 Config and Capabilities\r | |
| 1187 | #define R_PCH_PCH_HPET_T2CV 0x148 // HPET Timer 2 Comparator Value\r | |
| 1188 | \r | |
| 1189 | #define B_PCH_PCH_HPET_TXC_IRC 0xFFFFFFFF00000000 // Interrupt Rout Capability\r | |
| 1190 | #define B_PCH_PCH_HPET_TXC_FID BIT15 // FSB Interrupt Delivery\r | |
| 1191 | #define B_PCH_PCH_HPET_TXC_FE BIT14 // FSB Enable\r | |
| 1192 | #define B_PCH_PCH_HPET_TXC_IR 0x3E00 // Interrupt Rout\r | |
| 1193 | #define B_PCH_PCH_HPET_TXC_T32M BIT8 // Timer 32-bit Mode\r | |
| 1194 | #define B_PCH_PCH_HPET_TXC_TVS BIT6 // Timer Value Set\r | |
| 1195 | #define B_PCH_PCH_HPET_TXC_TS BIT5 // Timer Size\r | |
| 1196 | #define B_PCH_PCH_HPET_TXC_PIC BIT4 // Periodic Interrupt Capable\r | |
| 1197 | #define B_PCH_PCH_HPET_TXC_TYP BIT3 // Timer Type\r | |
| 1198 | #define B_PCH_PCH_HPET_TXC_IE BIT2 // Interrupt Enable\r | |
| 1199 | #define B_PCH_PCH_HPET_TXC_IT BIT1 // Timer Interrupt Type\r | |
| 1200 | \r | |
| 1201 | #endif\r |