]> git.proxmox.com Git - mirror_edk2.git/blame_incremental - MdeModulePkg/MdeModulePkg.dec
projects / mirror_edk2.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
MdeModulePkg/dec: add PcdImageProtectionPolicy.
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
... / ...
CommitLineData
1## @file MdeModulePkg.dec\r
2# This package provides the modules that conform to UEFI/PI Industry standards.\r
3# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
4# and libraries instances, which are used for those modules.\r
5#\r
6# Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>\r
7# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>\r
8# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
9# This program and the accompanying materials are licensed and made available under\r
10# the terms and conditions of the BSD License that accompanies this distribution.\r
11# The full text of the license may be found at\r
12# http://opensource.org/licenses/bsd-license.php.\r
13#\r
14# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
15# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
16#\r
17##\r
18\r
19\r
20[Defines]\r
21 DEC_SPECIFICATION = 0x00010005\r
22 PACKAGE_NAME = MdeModulePkg\r
23 PACKAGE_UNI_FILE = MdeModulePkg.uni\r
24 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
25 PACKAGE_VERSION = 0.96\r
26\r
27[Includes]\r
28 Include\r
29\r
30\r
31[LibraryClasses]\r
32 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
33 # This library is only intended to be used by UEFI network stack modules.\r
34 IpIoLib|Include/Library/IpIoLib.h\r
35\r
36 ## @libraryclass Basic function for UEFI network stack.\r
37 # This library is only intended to be used by UEFI network stack modules.\r
38 NetLib|Include/Library/NetLib.h\r
39\r
40 ## @libraryclass The helper routines to access UDP service.\r
41 # This library is only intended to be used by UEFI network stack modules.\r
42 UdpIoLib|Include/Library/UdpIoLib.h\r
43\r
44 ## @libraryclass The helper routines to access TCP service.\r
45 # This library is only intended to be used by UEFI network stack modules.\r
46 TcpIoLib|Include/Library/TcpIoLib.h\r
47\r
48 ## @libraryclass The helper routines to access HTTP service.\r
49 # This library is only intended to be used by UEFI network stack modules.\r
50 HttpLib|Include/Library/HttpLib.h\r
51\r
52 ## @libraryclass Defines a set of methods to reset whole system.\r
53 ResetSystemLib|Include/Library/ResetSystemLib.h\r
54\r
55 ## @libraryclass Defines a set of methods related do S3 mode.\r
56 # This library class is no longer used and modules using this library should\r
57 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
58 S3Lib|Include/Library/S3Lib.h\r
59\r
60 ## @libraryclass Defines a set of methods related recovery mode.\r
61 # This library class is no longer used and modules using this library should\r
62 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
63 RecoveryLib|Include/Library/RecoveryLib.h\r
64\r
65 ## @libraryclass Provides HII related functions.\r
66 HiiLib|Include/Library/HiiLib.h\r
67\r
68 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
69 CapsuleLib|Include/Library/CapsuleLib.h\r
70\r
71 ## @libraryclass Library for Deferred Procedure Calls.\r
72 DpcLib|Include/Library/DpcLib.h\r
73\r
74 ## @libraryclass Provides global variables that are pointers\r
75 # to the UEFI HII related protocols.\r
76 #\r
77 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
78\r
79 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
80 #\r
81 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
82\r
83 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
84 #\r
85 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
86\r
87 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
88 #\r
89 DebugAgentLib|Include/Library/DebugAgentLib.h\r
90\r
91 ## @libraryclass Provide platform specific hooks.\r
92 #\r
93 PlatformHookLib|Include/Library/PlatformHookLib.h\r
94\r
95 ## @libraryclass Provide platform specific hooks for SMM core.\r
96 #\r
97 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
98\r
99 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
100 #\r
101 LockBoxLib|Include/Library/LockBoxLib.h\r
102\r
103 ## @libraryclass Provide the CPU exception handler.\r
104 #\r
105 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
106\r
107 ## @libraryclass Provides platform specific display interface.\r
108 #\r
109 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
110\r
111 ## @libraryclass Provides sorting functions\r
112 SortLib|Include/Library/SortLib.h\r
113\r
114 ## @libraryclass Provides core boot manager functions\r
115 UefiBootManagerLib|Include/Library/UefiBootManagerLib.h\r
116\r
117 ## @libraryclass Provides core boot manager functions\r
118 PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
119\r
120 ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
121 #\r
122 TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
123\r
124 ## @libraryclass Provides authenticated variable services.\r
125 #\r
126 AuthVariableLib|Include/Library/AuthVariableLib.h\r
127\r
128 ## @libraryclass Provides variable check services and database management.\r
129 #\r
130 VarCheckLib|Include/Library/VarCheckLib.h\r
131\r
132 ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
133 #\r
134 PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
135\r
136 ## @libraryclass Provides services to get do the file explorer.\r
137 #\r
138 FileExplorerLib|Include/Library/FileExplorerLib.h\r
139\r
140 ## @libraryclass Provides interfaces about logo display.\r
141 #\r
142 BootLogoLib|Include/Library/BootLogoLib.h\r
143\r
144 ## @libraryclass Provides interfaces about Ipmi submit generic commond.\r
145 #\r
146 IpmiLib|Include/Library/IpmiLib.h\r
147\r
148 ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.\r
149 #\r
150 PciHostBridgeLib|Include/Library/PciHostBridgeLib.h\r
151\r
152 ## @libraryclass Provides services to record memory profile of multilevel caller.\r
153 #\r
154 MemoryProfileLib|Include/Library/MemoryProfileLib.h\r
155\r
156 ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.\r
157 ##\r
158 FrameBufferBltLib|Include/Library/FrameBufferBltLib.h\r
159\r
160 ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.\r
161 #\r
162 FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h\r
163\r
164 ## @libraryclass Provides a service to register non-discoverable device\r
165 ##\r
166 NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h\r
167\r
168[Guids]\r
169 ## MdeModule package token space guid\r
170 # Include/Guid/MdeModulePkgTokenSpace.h\r
171 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
172\r
173 ## Hob guid for Pcd DataBase\r
174 # Include/Guid/PcdDataBaseHobGuid.h\r
175 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
176\r
177 ## Guid for PCD DataBase signature.\r
178 # Include/Guid/PcdDataBaseSignatureGuid.h\r
179 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
180\r
181 ## Guid for EDKII implementation GUIDed opcodes\r
182 # Include/Guid/MdeModuleHii.h\r
183 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
184\r
185 ## Guid for Framework vfr GUIDed opcodes.\r
186 # Include/Guid/MdeModuleHii.h\r
187 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
188\r
189 ## Guid to specify the System Non Volatile FV\r
190 # Include/Guid/SystemNvDataGuid.h\r
191 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
192\r
193 ## GUID used as the signature of FTW working block header.\r
194 # Include/Guid/SystemNvDataGuid.h\r
195 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
196\r
197 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
198 # Include/Guid/FaultTolerantWrite.h\r
199 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
200\r
201 ## Guid specify the device is the console out device.\r
202 # Include/Guid/ConsoleOutDevice.h\r
203 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
204\r
205 ## Guid specify the device is the console in device.\r
206 # Include/Guid/ConsoleInDevice.h\r
207 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
208\r
209 ## Hob and Variable guid specify the platform memory type information.\r
210 # Include/Guid/MemoryTypeInformation.h\r
211 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
212\r
213 ## Capsule update hob and variable guid\r
214 # Include/Guid/CapsuleVendor.h\r
215 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
216\r
217 ## Guid specifiy the device is the StdErr device.\r
218 # Include/Guid/StandardErrorDevice.h\r
219 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
220\r
221 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
222 # Include/Guid/VariableFormat.h\r
223 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
224\r
225 ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
226 # Include/Guid/AuthenticatedVariableFormat.h\r
227 gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
228\r
229 # Include/Guid/VariableIndexTable.h\r
230 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
231\r
232 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
233 # Include/Guid/SmmVariableCommon.h\r
234 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
235\r
236 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
237 # Include/Guid/Performance.h\r
238 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
239 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
240 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
241 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
242\r
243 ## Guid is defined for CRC32 encapsulation scheme.\r
244 # Include/Guid/Crc32GuidedSectionExtraction.h\r
245 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
246\r
247 ## Include/Guid/StatusCodeCallbackGuid.h\r
248 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
249\r
250 ## GUID identifies status code records HOB that originate from the PEI status code\r
251 # Include/Guid/MemoryStatusCodeRecord.h\r
252 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
253\r
254 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
255 # Include/Guid/StatusCodeDataTypeDebug.h\r
256 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
257\r
258 ## A configuration Table Guid for Load module at fixed address\r
259 # Include/Guid/LoadModuleAtFixedAddress.h\r
260 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
261\r
262 ## GUID used to store the global debug mask value into an EFI Variable\r
263 # Include/Guid/DebugMask.h\r
264 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
265\r
266 ## Event for the DXE Core to signal idle events\r
267 # Include/Guid/EventIdle.h\r
268 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
269\r
270 ## Include/Guid/RecoveryDevice.h\r
271 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
272\r
273 ## Include/Guid/RecoveryDevice.h\r
274 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
275\r
276 ## Include/Guid/RecoveryDevice.h\r
277 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
278\r
279 ## Include/Guid/RecoveryDevice.h\r
280 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
281\r
282 ## Include/Guid/SmmLockBox.h\r
283 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
284\r
285 ## Include/Guid/AcpiS3Context.h\r
286 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
287\r
288 ## Include/Guid/AcpiS3Context.h\r
289 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
290\r
291 ## Include/Guid/BootScriptExecutorVariable.h\r
292 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
293 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
294\r
295 ## Include/Guid/UsbKeyBoardLayout.h\r
296 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
297 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
298\r
299 ## Include/Guid/HiiResourceSampleHii.h\r
300 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
301\r
302 ## Include/Guid/DriverSampleHii.h\r
303 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
304 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
305 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
306\r
307 ## Include/Guid/PlatDriOverrideHii.h\r
308 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
309\r
310 ## Include/Guid/Ip4Config2Hii.h\r
311 gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
312\r
313 ## Include/Guid/VlanConfigHii.h\r
314 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
315\r
316 ## Include/Guid/Ip4IScsiConfigHii.h\r
317 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
318 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
319\r
320 ## Include/Guid/ZeroGuid.h\r
321 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
322\r
323 ## Include/Guid/MtcVendor.h\r
324 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
325\r
326 ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
327 # Include/Guid/FirmwarePerformance.h\r
328 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
329 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
330\r
331 ## Include/Guid/ExitBootServiceFailed.h\r
332 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
333\r
334 ## Include/Guid/ConnectConInEvent.h\r
335 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
336\r
337 ## Include/Guid/StatusCodeDataTypeVariable.h\r
338 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
339\r
340 ## Include/Guid/MemoryProfile.h\r
341 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
342 gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}\r
343\r
344 ## Include/Protocol/VarErrorFlag.h\r
345 gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
346\r
347 ## GUID indicates the LZMA custom compress/decompress algorithm.\r
348 # Include/Guid/LzmaDecompress.h\r
349 gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
350 gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
351\r
352 ## Include/Guid/TtyTerm.h\r
353 gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
354\r
355 ## Include/Guid/HiiBootMaintenanceFormset.h\r
356 gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
357\r
358 gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }\r
359\r
360 ## Include/Guid/RamDiskHii.h\r
361 gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}\r
362\r
363 ## Include/Guid/PiSmmCommunicationRegionTable.h\r
364 gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}\r
365\r
366 ## Include/Guid/PiSmmMemoryAttributesTable.h\r
367 gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}\r
368\r
369 ## Include/Guid/NonDiscoverableDevice.h\r
370 gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }\r
371 gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }\r
372 gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }\r
373 gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }\r
374 gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }\r
375 gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }\r
376 gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }\r
377 gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }\r
378 gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }\r
379\r
380[Ppis]\r
381 ## Include/Ppi/AtaController.h\r
382 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
383\r
384 ## Include/Ppi/UsbHostController.h\r
385 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
386\r
387 ## Include/Ppi/Usb2HostController.h\r
388 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
389\r
390 ## Include/Ppi/UsbController.h\r
391 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
392\r
393 ## Include/Ppi/UsbIo.h\r
394 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
395\r
396 ## Include/Ppi/SecPerformance.h\r
397 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
398\r
399 ## Include/Ppi/SmmCommunication.h\r
400 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
401\r
402 ## Include/Ppi/SmmAccess.h\r
403 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
404\r
405 ## Include/Ppi/SmmControl.h\r
406 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
407\r
408 ## Include/Ppi/PostBootScriptTable.h\r
409 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
410\r
411 ## Include/Ppi/SerialPortPei.h\r
412 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
413\r
414 ## Include/Ppi/UfsHostController.h\r
415 gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
416\r
417 ## Include/Ppi/IpmiPpi.h\r
418 gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}\r
419\r
420 ## Include/Ppi/SdMmcHostController.h\r
421 gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}\r
422\r
423[Protocols]\r
424 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
425 # Include/Protocol/LoadPe32Image.h\r
426 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
427 # If developer need implement such functionality, they should use BasePeCoffLib.\r
428 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
429\r
430 ## Print protocols define basic print functions to print the format unicode and ascii string.\r
431 # Include/Protocol/Print2.h\r
432 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
433 gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }\r
434\r
435 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
436 # Include/Protocol/GenericMemoryTest.h\r
437 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
438\r
439 ## This protocol defines the Debugger Configuration interface.\r
440 # Include/Protocol/DebuggerConfiguration.h\r
441 gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}\r
442\r
443 ## Include/Protocol/Dpc.h\r
444 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
445\r
446 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
447 # Include/Protocol/FaultTolerantWrite.h\r
448 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
449\r
450 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
451 # Include/Protocol/SmmFaultTolerantWrite.h\r
452 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
453\r
454 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
455 # Include/Protocol/SwapAddressRange.h\r
456 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
457\r
458 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
459 # Include/Protocol/SmmSwapAddressRange.h\r
460 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
461\r
462 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
463 # Include/Protocol/SmmVariableProtocol.h\r
464 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
465\r
466 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
467 # Include/Protocol/VariableLock.h\r
468 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
469\r
470 ## Include/Protocol/VarCheck.h\r
471 gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }\r
472\r
473 ## Include/Protocol/SmmVarCheck.h\r
474 gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }\r
475\r
476 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
477 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
478 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
479\r
480 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
481 # Include/Guid/DebugMask.h\r
482 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
483\r
484 ## Include/Protocol/LockBox.h\r
485 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
486\r
487 ## Include/Protocol/FormBrowserEx.h\r
488 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
489 gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
490\r
491 ## Include/Protocol/EbcVmTest.h\r
492 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
493\r
494 ## Include/Protocol/EbcSimpleDebugger.h\r
495 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
496\r
497 ## Include/Protocol/BootLogo.h\r
498 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
499\r
500 ## Include/Protocol/DisplayProtocol.h\r
501 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
502\r
503 ## Include/Protocol/FormBrowserEx2.h\r
504 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
505\r
506 ## Include/Protocol/UfsHostController.h\r
507 gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
508\r
509 ## Include/Protocol/EsrtManagement.h\r
510 gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
511\r
512 ## Include/Protocol/SmmExitBootServices.h\r
513 gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
514\r
515 ## Include/Protocol/SmmLegacyBoot.h\r
516 gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
517\r
518 ## Include/Protocol/SmmReadyToBoot.h\r
519 gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
520\r
521 ## Include/Protocol/PlatformLogo.h\r
522 gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }\r
523\r
524 ## Include/Protocol/FileExplorer.h\r
525 gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
526\r
527 ## Include/Protocol/IpmiProtocol.h\r
528 gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }\r
529 gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }\r
530\r
531 ## PS/2 policy protocol abstracts the specific platform initialization and setting.\r
532 # Include/Protocol/Ps2Policy.h\r
533 gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }\r
534\r
535 ## Include/Protocol/NonDiscoverableDevice.h\r
536 gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }\r
537\r
538#\r
539# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
540# 0x80000001 | Invalid value provided.\r
541# 0x80000002 | Reserved bits must be set to zero.\r
542# 0x80000003 | Incorrect progress code provided.\r
543# 0x80000004 | Invalid foreground color specified.\r
544# 0x80000005 | Invalid background color specified.\r
545# 0x80000006 | Incorrect error code provided.\r
546#\r
547\r
548[PcdsFeatureFlag]\r
549 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r
550 # TRUE - Supports update capsule across a system reset.<BR>\r
551 # FALSE - Does not support update capsule across a system reset.<BR>\r
552 # @Prompt Enable update capsule across a system reset.\r
553 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
554\r
555 ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r
556 # TRUE - All PCD PPI services will be produced.<BR>\r
557 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r
558 # @Prompt Enable full PEI PCD services.\r
559 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
560\r
561 ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r
562 # It can be disabled to save size.<BR><BR>\r
563 # TRUE - Device Path To Text Protocol will be produced.<BR>\r
564 # FALSE - Device Path To Text Protocol will not be produced.<BR>\r
565 # @Prompt Enable Device Path to Text support.\r
566 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
567\r
568 ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r
569 # It can be disabled to save size.<BR><BR>\r
570 # TRUE - Device Path From Text Protocol will be produced.<BR>\r
571 # FALSE - Device Path From Text Protocol will not be produced.<BR>\r
572 # @Prompt Enable Device Path From Text support.\r
573 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
574\r
575 ## Indicates if the statistics about variable usage will be collected. This information is\r
576 # stored as a vendor configuration table into the EFI system table.\r
577 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
578 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r
579 # TRUE - Statistics about variable usage will be collected.<BR>\r
580 # FALSE - Statistics about variable usage will not be collected.<BR>\r
581 # @Prompt Enable variable statistics collection.\r
582 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
583\r
584 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r
585 # TRUE - Installs Unicode Collation Protocol.<BR>\r
586 # FALSE - Does not install Unicode Collation Protocol.<BR>\r
587 # @Prompt Enable Unicode Collation support.\r
588 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
589\r
590 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r
591 # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r
592 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r
593 # @Prompt Enable Unicode Collation 2 support.\r
594 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
595\r
596 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
597 # It could be set FALSE to save size.<BR><BR>\r
598 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
599 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
600 # @Prompt Enable ConOut GOP support.\r
601 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
602\r
603 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
604 # It could be set FALSE to save size.<BR><BR>\r
605 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
606 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
607 # @Prompt Enable ConOut UGA support.\r
608 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
609\r
610 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r
611 # This PCD is used to tune PEI phase performance to reduce the search image time.\r
612 # It can be set according to the generated image section type.<BR><BR>\r
613 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r
614 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r
615 # @Prompt PeiCore search TE section first.\r
616 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
617\r
618 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
619 # interrupt to access usb device in the case of absence of usb stack.\r
620 # DUET platform requires the token to be TRUE.<BR><BR>\r
621 # TRUE - Turn off usb legacy support.<BR>\r
622 # FALSE - Does not turn off usb legacy support.<BR>\r
623 # @Prompt Turn off USB legacy support.\r
624 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
625\r
626 ## Indicates if HiiImageProtocol will be installed.\r
627 # FALSE is for size reduction.<BR><BR>\r
628 # TRUE - Installs HiiImageProtocol.<BR>\r
629 # FALSE - Does not install HiiImageProtocol.<BR>\r
630 # @Prompt Enable HII image support.\r
631 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
632\r
633 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r
634 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
635 # from HII database.<BR><BR>\r
636 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r
637 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r
638 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
639 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
640\r
641 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
642 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
643 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
644 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
645 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
646 # @Prompt Enable framework backward compatibility support.\r
647 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
648\r
649 ## Indicates if HelloWorld Application will print the verbose information.\r
650 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
651 # TRUE - HelloWorld Application will print the verbose information.<BR>\r
652 # FALSE - HelloWorld Application will not print the verbose information.<BR>\r
653 # @Prompt Enable HelloWorld print.\r
654 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
655\r
656 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r
657 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r
658 # FALSE - Only FTW Write service is available.<BR>\r
659 # @Prompt Enable FULL FTW services.\r
660 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
661\r
662 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r
663 # TRUE - DXE IPL will support UEFI decompression.<BR>\r
664 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r
665 # @Prompt Enable UEFI decompression support in DXE IPL.\r
666 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
667\r
668 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r
669 # TRUE - PciBus driver supports the hot plug device.<BR>\r
670 # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r
671 # @Prompt Enable PciBus hot plug device support.\r
672 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
673\r
674 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r
675 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
676 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
677 # @Prompt Enable PCI bridge IO alignment probe.\r
678 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
679\r
680 ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r
681 # TRUE - Reports StatusCode via Serial port.<BR>\r
682 # FALSE - Does not report StatusCode via Serial port.<BR>\r
683 # @Prompt Enable StatusCode via Serial port.\r
684 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
685\r
686 ## Indicates if StatusCode is stored in memory.\r
687 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r
688 # TRUE - Stores StatusCode in memory.<BR>\r
689 # FALSE - Does not store StatusCode in memory.<BR>\r
690 # @Prompt Enable StatusCode via memory.\r
691 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
692\r
693 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r
694 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r
695 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r
696 # @Prompt Enable PEI StatusCode replay in DXE phase\r
697 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
698\r
699 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r
700 # TRUE - Installs ACPI SDT protocol.<BR>\r
701 # FALSE - Does not install ACPI SDT protocol.<BR>\r
702 # @Prompt Enable ACPI SDT support.\r
703 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
704\r
705 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
706 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r
707 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
708 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
709 # @Prompt Enable unaligned PCI I/O support.\r
710 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
711\r
712 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r
713 # TRUE - TEXT statement will always be set to GrayOut.<BR>\r
714 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r
715 # @Prompt Always GrayOut TEXT statement.\r
716 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
717\r
718 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r
719 # TRUE - The unselectable menu will be set to GrayOut.<BR>\r
720 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r
721 # @Prompt GrayOut read only menu.\r
722 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
723\r
724 ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r
725 # TRUE - Supports recovery from IDE disk.<BR>\r
726 # FALSE - Does not support recovery from IDE disk.<BR>\r
727 # @Prompt Enable recovery on IDE disk.\r
728 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
729\r
730 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r
731 # TRUE - Supports recovery from FAT floppy disk.<BR>\r
732 # FALSE - Does not support recovery from FAT floppy disk.<BR>\r
733 # @Prompt Enable recovery on FAT floppy disk.\r
734 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
735\r
736 ## Indicates if recovery from data CD will be supported.<BR><BR>\r
737 # TRUE - Supports recovery from data CD.<BR>\r
738 # FALSE - Does not support recovery from data CD.<BR>\r
739 # @Prompt Enable recovery on data CD.\r
740 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
741\r
742 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r
743 # TRUE - Supports recovery from USB disk.<BR>\r
744 # FALSE - Does not support recovery from USB disk.<BR>\r
745 # @Prompt Enable recovery on FAT USB disk.\r
746 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
747\r
748 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r
749 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r
750 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r
751 # @Prompt Enable S3 performance data support.\r
752 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
753\r
754 ## Indicates if PS2 keyboard does a extended verification during start.\r
755 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
756 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
757 # TRUE - Turn on PS2 keyboard extended verification.<BR>\r
758 # FALSE - Turn off PS2 keyboard extended verification.<BR>\r
759 # @Prompt Turn on PS2 Keyboard Extended Verification\r
760 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072\r
761\r
762 ## Indicates if Serial device uses half hand shake.<BR><BR>\r
763 # TRUE - Serial device uses half hand shake.<BR>\r
764 # FALSE - Serial device doesn't use half hand shake.<BR>\r
765 # @Prompt Enable Serial device Half Hand Shake\r
766 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073\r
767\r
768 ## Indicates if HII data and configuration has been exported.<BR><BR>\r
769 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
770 # simulator platform because the performance cost for this feature.\r
771 # TRUE - Export HII data and configuration data.<BR>\r
772 # FALSE - Does not export HII data and configuration.<BR>\r
773 # @Prompt Enable export HII data and configuration to be used in OS runtime.\r
774 gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074\r
775\r
776 ## Indicates if PS2 mouse does a extended verification during start.\r
777 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
778 # TRUE - Turn on PS2 mouse extended verification. <BR>\r
779 # FALSE - Turn off PS2 mouse extended verification. <BR>\r
780 # @Prompt Turn on PS2 Mouse Extended Verification\r
781 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075\r
782\r
783 ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM\r
784 # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),\r
785 # which requires that all PCI MMIO BARs are located below 4 GB\r
786 # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM\r
787 # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM\r
788 # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs\r
789 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a\r
790\r
791[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]\r
792 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a\r
793\r
794[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
795 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
796 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
797 # is built in firmware.<BR><BR>\r
798 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r
799 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r
800 # @Prompt DxeIpl switch to long mode.\r
801 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
802\r
803 ## Indicates if DxeIpl should rebuild page tables. This flag only\r
804 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r
805 # TRUE - DxeIpl will rebuild page tables.<BR>\r
806 # FALSE - DxeIpl will not rebuild page tables.<BR>\r
807 # @Prompt DxeIpl rebuild page tables.\r
808 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
809\r
810[PcdsFixedAtBuild]\r
811 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r
812 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r
813 # 0: Disable the feature.<BR>\r
814 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r
815 # @Prompt Enable LMFA feature.\r
816 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r
817 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
818\r
819 ## Progress Code for OS Loader LoadImage start.<BR><BR>\r
820 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r
821 # @Prompt Progress Code for OS Loader LoadImage start.\r
822 # @ValidList 0x80000003 | 0x03058000\r
823 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
824\r
825 ## Progress Code for OS Loader StartImage start.<BR><BR>\r
826 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r
827 # @Prompt Progress Code for OS Loader StartImage start.\r
828 # @ValidList 0x80000003 | 0x03058001\r
829 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
830\r
831 ## Progress Code for S3 Suspend start.<BR><BR>\r
832 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r
833 # @Prompt Progress Code for S3 Suspend start.\r
834 # @ValidList 0x80000003 | 0x03078000\r
835 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
836\r
837 ## Progress Code for S3 Suspend end.<BR><BR>\r
838 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r
839 # @Prompt Progress Code for S3 Suspend end.\r
840 # @ValidList 0x80000003 | 0x03078001\r
841 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
842\r
843 ## Error Code for SetVariable failure.<BR><BR>\r
844 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r
845 # @Prompt Error Code for SetVariable failure.\r
846 # @ValidList 0x80000006 | 0x03058002\r
847 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
848\r
849[PcdsFixedAtBuild, PcdsPatchableInModule]\r
850 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
851 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
852 # for a dynamic PCD used in PEI phase.\r
853 # @Prompt Max PEI PCD callback number per PCD entry.\r
854 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
855\r
856 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r
857 # to store PCD value.\r
858 # @Prompt VPD base address.\r
859 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
860\r
861 ## Maximum number of FV is supported by PeiCore's dispatching.\r
862 # @Prompt Maximum number of FV supported by PeiCore.\r
863 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
864\r
865 ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
866 # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
867 # @Prompt Maximum File count per FV supported by PeiCore.\r
868 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
869\r
870 ## Maximum stack size for PeiCore.\r
871 # @Prompt Maximum stack size for PeiCore.\r
872 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
873\r
874 ## Maximum PPI count is supported by PeiCore's PPI database.\r
875 # @Prompt Maximum PPI count supported by PeiCore.\r
876 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
877\r
878 ## The maximum size of a single non-HwErr type variable.\r
879 # @Prompt Maximum variable size.\r
880 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
881\r
882 ## The maximum size of a single authenticated variable.\r
883 # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
884 # @Prompt Maximum authenticated variable size.\r
885 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
886\r
887 ## The maximum size of single hardware error record variable.<BR><BR>\r
888 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
889 # In IA64 platforms, this value should be larger than 128KB.<BR>\r
890 # @Prompt Maximum HwErr variable size.\r
891 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
892\r
893 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
894 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
895 # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
896 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
897 # @Prompt HwErr variable storage size.\r
898 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
899\r
900 ## The size of maximum user NV variable space.<BR><BR>\r
901 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
902 # If the value is 0, it means user variable share the same NV storage with system variable,\r
903 # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>\r
904 # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,\r
905 # otherwise the variable will be regarded as user variable.<BR>\r
906 # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>\r
907 # 2) Variables managed by Variable driver internally.<BR>\r
908 # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>\r
909 # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>\r
910 # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>\r
911 # @Prompt Maximum user NV variable space size.\r
912 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009\r
913\r
914 ## The size of NV variable space reserved at UEFI boottime.<BR><BR>\r
915 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
916 # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.\r
917 # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>\r
918 # Then the common NV variable space size at boottime will be\r
919 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>\r
920 # and the common NV variable space size at runtime will be\r
921 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>\r
922 # @Prompt Boottime reserved NV variable space size.\r
923 gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007\r
924\r
925 ## Reclaim variable space at EndOfDxe.<BR><BR>\r
926 # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>\r
927 # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>\r
928 # @Prompt Reclaim variable space at EndOfDxe.\r
929 gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008\r
930\r
931 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r
932 # @Prompt Variable storage size.\r
933 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
934\r
935 ## FFS filename to find the ACPI tables.\r
936 # @Prompt FFS name of ACPI tables storage.\r
937 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
938\r
939 ## FFS filename to find the capsule coalesce image.\r
940 # @Prompt FFS name of capsule coalesce image.\r
941 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
942\r
943 ## Maximum number of performance log entries during PEI phase.\r
944 # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is\r
945 # more than 255.\r
946 # @Prompt Maximum number of PEI performance log entries.\r
947 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
948\r
949 ## Maximum number of performance log entries during PEI phase.\r
950 # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of\r
951 # entries. If greater than 0, then this PCD determines the number of entries,\r
952 # and PcdMaxPeiPerformanceLogEntries is ignored.\r
953 # @Prompt Maximum number of PEI performance log entries.\r
954 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035\r
955\r
956 ## RTC Update Timeout Value(microsecond).\r
957 # @Prompt RTC Update Timeout Value.\r
958 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
959\r
960 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r
961 # TRUE - 16550 serial port registers are in MMIO space.<BR>\r
962 # FALSE - 16550 serial port registers are in I/O space.<BR>\r
963 # @Prompt Serial port registers use MMIO.\r
964 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
965\r
966 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
967 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
968 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
969 # @Prompt Enable serial port hardware flow control.\r
970 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
971\r
972 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r
973 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r
974 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r
975 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
976 # @Prompt Enable serial port cable detetion.\r
977 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
978\r
979 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
980 # @Prompt Base address of serial port registers.\r
981 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
982\r
983 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
984 # @Prompt Baud rate for serial port.\r
985 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r
986 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
987\r
988 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r
989 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r
990 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r
991 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r
992 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
993 #\r
994 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r
995 # @Prompt Serial port Line Control settings.\r
996 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r
997 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
998\r
999 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r
1000 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r
1001 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r
1002 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r
1003 # BIT4..BIT3 - Reserved. Must be 0.<BR>\r
1004 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r
1005 # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
1006 #\r
1007 # Default is to enable and clear all FIFOs.<BR>\r
1008 # @Prompt Serial port FIFO Control settings.\r
1009 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
1010 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
1011\r
1012 ## This setting can override the default TFTP block size. A value of 0 computes\r
1013 # the default from MTU information. A non-zero value will be used as block size\r
1014 # in bytes.\r
1015 # @Prompt TFTP block size.\r
1016 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
1017\r
1018 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
1019 # structure. The default value for this PCD is 0, which means that the DXE Core\r
1020 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
1021 # boundary as close to the top of memory as feasible. If this PCD is set to a\r
1022 # value other than 0, then the DXE Core will first attempt to allocate the\r
1023 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
1024 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
1025 # boundary as close to the top of memory as feasible.\r
1026 # @Prompt Maximum Efi System Table Pointer address.\r
1027 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
1028\r
1029 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
1030 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
1031 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
1032 # @Prompt Shadow Peim On S3 Boot.\r
1033 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
1034\r
1035 ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
1036 # This PCD is used on other boot path except for S3 boot.\r
1037 # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
1038 # FALSE - Not shadow PEIM after memory is ready.<BR>\r
1039 # @Prompt Shadow Peim and PeiCore on boot\r
1040 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
1041\r
1042 ## The mask is used to control memory profile behavior.<BR><BR>\r
1043 # BIT0 - Enable UEFI memory profile.<BR>\r
1044 # BIT1 - Enable SMRAM profile.<BR>\r
1045 # BIT7 - Disable recording at the start.<BR>\r
1046 # @Prompt Memory Profile Property.\r
1047 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0\r
1048 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
1049\r
1050 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
1051 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
1052 #\r
1053 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
1054 # EfiReservedMemoryType 0x0001<BR>\r
1055 # EfiLoaderCode 0x0002<BR>\r
1056 # EfiLoaderData 0x0004<BR>\r
1057 # EfiBootServicesCode 0x0008<BR>\r
1058 # EfiBootServicesData 0x0010<BR>\r
1059 # EfiRuntimeServicesCode 0x0020<BR>\r
1060 # EfiRuntimeServicesData 0x0040<BR>\r
1061 # EfiConventionalMemory 0x0080<BR>\r
1062 # EfiUnusableMemory 0x0100<BR>\r
1063 # EfiACPIReclaimMemory 0x0200<BR>\r
1064 # EfiACPIMemoryNVS 0x0400<BR>\r
1065 # EfiMemoryMappedIO 0x0800<BR>\r
1066 # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
1067 # EfiPalCode 0x2000<BR>\r
1068 # EfiPersistentMemory 0x4000<BR>\r
1069 # OEM Reserved 0x4000000000000000<BR>\r
1070 # OS Reserved 0x8000000000000000<BR>\r
1071 #\r
1072 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
1073 #\r
1074 # @Prompt Memory profile memory type.\r
1075 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
1076\r
1077 ## This PCD is to control which drivers need memory profile data.<BR><BR>\r
1078 # For example:<BR>\r
1079 # One image only (Shell):<BR>\r
1080 # Header GUID<BR>\r
1081 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
1082 # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
1083 # Two or more images (Shell + WinNtSimpleFileSystem):<BR>\r
1084 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
1085 # 0x7F, 0x01, 0x04, 0x00,<BR>\r
1086 # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>\r
1087 # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
1088 # @Prompt Memory profile driver path.\r
1089 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043\r
1090\r
1091 ## Set image protection policy. The policy is bitwise.\r
1092 # If a bit is set, the image will be protected by DxeCore if it is aligned.\r
1093 # The code section becomes read-only, and the data section becomes non-executable.\r
1094 # If a bit is clear, the image will not be protected.<BR><BR>\r
1095 # BIT0 - Image from unknown device. <BR>\r
1096 # BIT1 - Image from firmware volume.<BR>\r
1097 # @Prompt Set image protection policy.\r
1098 # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F\r
1099 gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047\r
1100\r
1101 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
1102 # information that describes the path that contains zero or more PCI to PCI briges\r
1103 # followed by a PCI serial device. Each array entry is 4-bytes in length. The\r
1104 # first byte is the PCI Device Number, then second byte is the PCI Function Number,\r
1105 # and the last two bytes are the offset to the PCI power management capabilities\r
1106 # register used to manage the D0-D3 states. If a PCI power management capabilities\r
1107 # register is not present, then the last two bytes in the offset is set to 0. The\r
1108 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a\r
1109 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
1110 # @Prompt Pci Serial Device Info\r
1111 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
1112\r
1113 ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,\r
1114 # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that\r
1115 # describes the parameters of special PCI serial devices.\r
1116 # Each array entry is 24-byte in length. The array is terminated\r
1117 # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a\r
1118 # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.\r
1119 # The C style structure is defined as below:<BR>\r
1120 # typedef struct {<BR>\r
1121 # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>\r
1122 # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>\r
1123 # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>\r
1124 # UINT64 Offset; ///< The byte offset into to the BAR.<BR>\r
1125 # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>\r
1126 # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>\r
1127 # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
1128 # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>\r
1129 # UINT8 Reserved[2];<BR>\r
1130 # } PCI_SERIAL_PARAMETER;<BR>\r
1131 # It contains zero or more instances of the above structure.<BR>\r
1132 # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs\r
1133 # to contain two instances of the above structure, with the VendorId and DeviceId\r
1134 # equals to the Device ID and Vendor ID of the device; If the PCI device uses the\r
1135 # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and\r
1136 # BarIndex of second one equals to 1; If the PCI device uses the first BAR to\r
1137 # support both UARTs, BarIndex of both instance equals to 0, Offset of first\r
1138 # instance equals to 0 and Offset of second one equals to a value bigger than or\r
1139 # equal to 8.<BR>\r
1140 # For certain UART whose register needs to be accessed in DWORD aligned address,\r
1141 # RegisterStride equals to 4.\r
1142 # @Prompt Pci Serial Parameters\r
1143 gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071\r
1144\r
1145 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.\r
1146 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
1147 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
1148\r
1149 ## This PCD points to the file name GUID of the BootManagerMenuApp\r
1150 # Platform can customize the PCD to point to different application for Boot Manager Menu\r
1151 # @Prompt Boot Manager Menu File\r
1152 gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
1153\r
1154 ## This PCD points to the formset GUID of the driver health management form\r
1155 # The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
1156 # Platform can customize the PCD to point to different formset.\r
1157 # @Prompt Driver Health Management Form\r
1158 gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
1159\r
1160 ## The number of bytes between registers in serial device. The default is 1 byte.\r
1161 # @Prompt Serial Port Register Stride in Bytes\r
1162 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
1163\r
1164 ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
1165 # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
1166 # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
1167 # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
1168 gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
1169\r
1170 ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS\r
1171 # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h\r
1172 # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>\r
1173 # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>\r
1174 # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>\r
1175 # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>\r
1176 # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>\r
1177 # @Prompt Exposed ACPI table versions.\r
1178 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c\r
1179\r
1180 ## This PCD defines the MAX repair count.\r
1181 # The default value is 0 that means infinite.\r
1182 # @Prompt MAX repair count\r
1183 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076\r
1184\r
1185 ## Status Code for Capsule subclass definitions.<BR><BR>\r
1186 # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>\r
1187 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1188 # Override the value of this PCD in the platform DSC file as needed.\r
1189 # @Prompt Status Code for Capsule subclass definitions\r
1190 # @ValidList 0x80000003 | 0x00810000\r
1191 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100\r
1192\r
1193 ## Status Code for Capsule Process Begin.<BR><BR>\r
1194 # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>\r
1195 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1196 # Override the value of this PCD in the platform DSC file as needed.\r
1197 # @Prompt Status Code for Capsule Process Begin\r
1198 # @ValidList 0x80000003 | 0x00008001\r
1199 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101\r
1200\r
1201 ## Status Code for Capsule Process End.<BR><BR>\r
1202 # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>\r
1203 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1204 # Override the value of this PCD in the platform DSC file as needed.\r
1205 # @Prompt Status Code for Capsule Process End\r
1206 # @ValidList 0x80000003 | 0x00008002\r
1207 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102\r
1208\r
1209 ## Status Code for Capsule Process Updating Firmware.<BR><BR>\r
1210 # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>\r
1211 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1212 # Override the value of this PCD in the platform DSC file as needed.\r
1213 # @Prompt Status Code for Capsule Process Updating Firmware\r
1214 # @ValidList 0x80000003 | 0x00008003\r
1215 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103\r
1216\r
1217 ## Status Code for Capsule Process Update Firmware Success.<BR><BR>\r
1218 # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>\r
1219 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1220 # Override the value of this PCD in the platform DSC file as needed.\r
1221 # @Prompt Status Code for Capsule Process Update Firmware Success\r
1222 # @ValidList 0x80000003 | 0x00008004\r
1223 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104\r
1224\r
1225 ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>\r
1226 # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>\r
1227 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1228 # Override the value of this PCD in the platform DSC file as needed.\r
1229 # @Prompt Status Code for Capsule Process Update Firmware Failed\r
1230 # @ValidList 0x80000003 | 0x00008005\r
1231 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105\r
1232\r
1233 ## Status Code for Capsule Resetting System.<BR><BR>\r
1234 # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>\r
1235 # NOTE: The default value of this PCD may collide with other OEM specific status codes.\r
1236 # Override the value of this PCD in the platform DSC file as needed.\r
1237 # @Prompt Status Code for Capsule Resetting System\r
1238 # @ValidList 0x80000003 | 0x00008006\r
1239 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106\r
1240\r
1241 ## CapsuleMax value in capsule report variable.\r
1242 # @Prompt CapsuleMax value in capsule report variable.\r
1243 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107\r
1244\r
1245[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
1246 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
1247 # This PCD could be set to 0 then console output would be at max column and max row.\r
1248 # @Prompt Console output row.\r
1249 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
1250\r
1251 ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
1252 # This PCD could be set to 0 then console output would be at max column and max row.\r
1253 # @Prompt Console output column.\r
1254 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
1255\r
1256 ## This PCD defines the video horizontal resolution.\r
1257 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
1258 # @Prompt Video horizontal resolution.\r
1259 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
1260\r
1261 ## This PCD defines the video vertical resolution.\r
1262 # If this PCD is set to 0 then video resolution would be at highest resolution.\r
1263 # @Prompt Video vertical resolution.\r
1264 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
1265\r
1266 # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r
1267 # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r
1268 # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r
1269 # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r
1270 # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r
1271 # for text setup.\r
1272\r
1273 ## Specify the video horizontal resolution of text setup.\r
1274 # @Prompt Video Horizontal Resolution of Text Setup\r
1275 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r
1276\r
1277 ## Specify the video vertical resolution of text setup.\r
1278 # @Prompt Video Vertical Resolution of Text Setup\r
1279 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r
1280\r
1281 ## Specify the console output column of text setup.\r
1282 # @Prompt Console Output Column of Text Setup\r
1283 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r
1284\r
1285 ## Specify the console output row of text setup.\r
1286 # @Prompt Console Output Row of Text Setup\r
1287 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
1288\r
1289[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
1290 ## UART clock frequency is for the baud rate configuration.\r
1291 # @Prompt Serial Port Clock Rate.\r
1292 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
1293\r
1294 ## This PCD points to the front page formset GUID\r
1295 # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
1296 # @Prompt Front Page Formset.\r
1297 gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
1298\r
1299 ## Base address of the NV variable range in flash device.\r
1300 # @Prompt Base address of flash NV variable range.\r
1301 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
1302\r
1303 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r
1304 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1305 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1306 # be reflushed through the manner of fault tolerant write.\r
1307 # @Prompt Size of flash NV variable range.\r
1308 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
1309\r
1310 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
1311 # @Prompt Base address of flash FTW spare block range.\r
1312 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
1313\r
1314 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
1315 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
1316 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
1317 # be reflushed through the manner of fault tolerant write.\r
1318 # @Prompt Size of flash FTW spare block range.\r
1319 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
1320\r
1321 ## Base address of the FTW working block range in flash device.\r
1322 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
1323 # @Prompt Base address of flash FTW working block range.\r
1324 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
1325\r
1326 ## Size of the FTW working block range.\r
1327 # If the value is less than one block size, the work space range should not span blocks.\r
1328 # If the value is larger than one block size, it should be block size aligned.\r
1329 # @Prompt Size of flash FTW working block range.\r
1330 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
1331\r
1332 ## 64-bit Base address of the NV variable range in flash device.\r
1333 # @Prompt 64-bit Base address of flash NV variable range.\r
1334 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
1335\r
1336 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
1337 # @Prompt 64-bit Base address of flash FTW spare block range.\r
1338 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
1339\r
1340 ## 64-bit Base address of the FTW working block range in flash device.\r
1341 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
1342 # @Prompt 64-bit Base address of flash FTW working block range.\r
1343 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
1344\r
1345 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
1346 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
1347 # @Prompt Reserved memory range for EMU variable NV storage.\r
1348 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
1349\r
1350 ## This PCD defines the times to print hello world string.\r
1351 # This PCD is a sample to explain UINT32 PCD usage.\r
1352 # @Prompt HellowWorld print times.\r
1353 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
1354\r
1355 ## This PCD defines the HelloWorld print string.\r
1356 # This PCD is a sample to explain String typed PCD usage.\r
1357 # @Prompt HelloWorld print string.\r
1358 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
1359\r
1360 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r
1361 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
1362 # @Prompt Max size of populated capsule.\r
1363 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
1364\r
1365 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r
1366 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
1367 # @Prompt Max size of non-populated capsule.\r
1368 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
1369\r
1370 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r
1371 # @Prompt Firmware vendor.\r
1372 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
1373\r
1374 ## Firmware revision that is the default revision filled into the EFI System Table.\r
1375 # @Prompt Firmware revision.\r
1376 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
1377\r
1378 ## Null-terminated Unicode string that describes the firmware version.\r
1379 # @Prompt Firmware version string.\r
1380 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
1381\r
1382 ## Null-terminated Unicode string that contains the date the firmware was released\r
1383 # @Prompt Firmware release data string.\r
1384 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
1385\r
1386 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r
1387 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r
1388 # The default value in PeiPhase is 1 KBytes.<BR>\r
1389 # The default value in DxePhase is 128 KBytes.<BR>\r
1390 # @Prompt StatusCode memory size.\r
1391 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
1392\r
1393 ## Indicates if to reset system when memory type information changes.<BR><BR>\r
1394 # TRUE - Resets system when memory type information changes.<BR>\r
1395 # FALSE - Does not reset system when memory type information changes.<BR>\r
1396 # @Prompt Reset on memory type information change.\r
1397 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
1398\r
1399 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
1400 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1401 # 0x00 (EFI_BLACK)<BR>\r
1402 # 0x01 (EFI_BLUE)<BR>\r
1403 # 0x02 (EFI_GREEN)<BR>\r
1404 # 0x03 (EFI_CYAN)<BR>\r
1405 # 0x04 (EFI_RED)<BR>\r
1406 # 0x05 (EFI_MAGENTA)<BR>\r
1407 # 0x06 (EFI_BROWN)<BR>\r
1408 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1409 # 0x08 (EFI_DARKGRAY)<BR>\r
1410 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1411 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1412 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1413 # 0x0C (EFI_LIGHTRED)<BR>\r
1414 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1415 # 0x0E (EFI_YELLOW)<BR>\r
1416 # 0x0F (EFI_WHITE)<BR>\r
1417 # @Prompt Foreground color for browser subtile.\r
1418 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
1419 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
1420\r
1421 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
1422 # Only following values defined in UEFI specification are valid:<BR><BR>\r
1423 # 0x00 (EFI_BLACK)<BR>\r
1424 # 0x01 (EFI_BLUE)<BR>\r
1425 # 0x02 (EFI_GREEN)<BR>\r
1426 # 0x03 (EFI_CYAN)<BR>\r
1427 # 0x04 (EFI_RED)<BR>\r
1428 # 0x05 (EFI_MAGENTA)<BR>\r
1429 # 0x06 (EFI_BROWN)<BR>\r
1430 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1431 # 0x08 (EFI_DARKGRAY)<BR>\r
1432 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1433 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1434 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1435 # 0x0C (EFI_LIGHTRED)<BR>\r
1436 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1437 # 0x0E (EFI_YELLOW)<BR>\r
1438 # 0x0F (EFI_WHITE)<BR>\r
1439 # @Prompt Foreground color for browser field.\r
1440 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
1441 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
1442\r
1443 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
1444 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
1445 # 0x00 (EFI_BLACK)<BR>\r
1446 # 0x01 (EFI_BLUE)<BR>\r
1447 # 0x02 (EFI_GREEN)<BR>\r
1448 # 0x03 (EFI_CYAN)<BR>\r
1449 # 0x04 (EFI_RED)<BR>\r
1450 # 0x05 (EFI_MAGENTA)<BR>\r
1451 # 0x06 (EFI_BROWN)<BR>\r
1452 # 0x07 (EFI_LIGHTGRAY)<BR>\r
1453 # 0x08 (EFI_DARKGRAY)<BR>\r
1454 # 0x09 (EFI_LIGHTBLUE)<BR>\r
1455 # 0x0A (EFI_LIGHTGREEN)<BR>\r
1456 # 0x0B (EFI_LIGHTCYAN)<BR>\r
1457 # 0x0C (EFI_LIGHTRED)<BR>\r
1458 # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
1459 # 0x0E (EFI_YELLOW)<BR>\r
1460 # 0x0F (EFI_WHITE)<BR>\r
1461 # @Prompt Foreground color for highlighted browser field.\r
1462 # @ValidRange 0x80000004 | 0x00 - 0x0F\r
1463 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
1464\r
1465 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
1466 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
1467 # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
1468 # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r
1469 # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r
1470 # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r
1471 # 0x40 (EFI_BACKGROUND_RED)<BR>\r
1472 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r
1473 # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r
1474 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r
1475 # @Prompt Background color for highlighted browser field.\r
1476 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r
1477 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
1478\r
1479 ## Time in second to delay for SATA devices to spin-up for recovery.\r
1480 # @Prompt SATA spin-up delay time in second for recovery path.\r
1481 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
1482\r
1483 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
1484 # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
1485 # When changing the value of this PCD, the platform developer should make sure the memory size is\r
1486 # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
1487 # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
1488 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
1489\r
1490 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
1491 # The default size is 32K. When changing the value of this PCD, the platform developer should\r
1492 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r
1493 # @Prompt Stack size for CapsulePei transfer to long mode.\r
1494 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
1495\r
1496 ## Indicates if 1G page table will be enabled.<BR><BR>\r
1497 # TRUE - 1G page table will be enabled.<BR>\r
1498 # FALSE - 1G page table will not be enabled.<BR>\r
1499 # @Prompt Enable 1G page table support.\r
1500 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
1501\r
1502 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r
1503 # TRUE - Single Root I/O virtualization is supported.<BR>\r
1504 # FALSE - Single Root I/O virtualization is not supported.<BR>\r
1505 # @Prompt Enable SRIOV support.\r
1506 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
1507\r
1508 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r
1509 # TRUE - Alternative Routing-ID is supported.<BR>\r
1510 # FALSE - Alternative Routing-ID is not supported.<BR>\r
1511 # @Prompt Enable ARI support.\r
1512 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
1513\r
1514 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r
1515 # TRUE - Multi Root I/O virtualization is supported.<BR>\r
1516 # FALSE - Multi Root I/O virtualization is not supported.<BR>\r
1517 # @Prompt Enable MRIOV support.\r
1518 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
1519\r
1520 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r
1521 # BITN set indicates 2 of n+12 power<BR>\r
1522 # BIT0 set indicates 4KB alignment<BR>\r
1523 # BIT1 set indicates 8KB alignment<BR>\r
1524 # @Prompt SRIOV system page size.\r
1525 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
1526\r
1527 ## SMBIOS version.\r
1528 # @Prompt SMBIOS version.\r
1529 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055\r
1530\r
1531 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1532 # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
1533 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A\r
1534\r
1535 ## SMBIOS produce method.\r
1536 # BIT0 set indicates 32-bit entry point and table are produced.<BR>\r
1537 # BIT1 set indicates 64-bit entry point and table are produced.<BR>\r
1538 # @Prompt The policy to produce SMBIOS entry point and table.\r
1539 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069\r
1540\r
1541 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
1542 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
1543 # @Prompt Pad size for extension FPDT boot records.\r
1544 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
1545\r
1546 ## Indicates if ConIn device are connected on demand.<BR><BR>\r
1547 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
1548 # by Consplitter should be called before any real key read operation.<BR>\r
1549 # FALSE - ConIn device may be connected normally during BDS.<BR>\r
1550 # @Prompt ConIn connect on demand.\r
1551 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
1552\r
1553 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r
1554 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r
1555 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r
1556 # @Prompt Enable ATA S.M.A.R.T feature.\r
1557 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
1558\r
1559 ## Indicates if full PCI enumeration is disabled.<BR><BR>\r
1560 # TRUE - Full PCI enumeration is disabled.<BR>\r
1561 # FALSE - Full PCI enumeration is not disabled.<BR>\r
1562 # @Prompt Disable full PCI enumeration.\r
1563 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
1564\r
1565 ## Disk I/O - Number of Data Buffer block.\r
1566 # Define the size in block of the pre-allocated buffer. It provide better\r
1567 # performance for large Disk I/O requests.\r
1568 # @Prompt Disk I/O - Number of Data Buffer block.\r
1569 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
1570\r
1571 ## This PCD specifies the PCI-based UFS host controller mmio base address.\r
1572 # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r
1573 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1574 # @Prompt Mmio base address of pci-based UFS host controller.\r
1575 gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
1576\r
1577 ## Specify Max ESRT cache entry number supported for FMP instances\r
1578 #\r
1579 # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
1580 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
1581\r
1582 ## Specify Max ESRT cache entry number supported for Non FMP instances\r
1583 #\r
1584 # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
1585 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
1586\r
1587 ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
1588 #\r
1589 # @Prompt Flag to request system reboot after processing capsule.\r
1590 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
1591\r
1592 ## Publish PropertiesTable or not.\r
1593 #\r
1594 # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
1595 # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
1596 # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
1597 # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
1598 # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
1599 #\r
1600 # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
1601 # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
1602 # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
1603 # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
1604 # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
1605 # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
1606 #\r
1607 # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
1608 # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
1609 # section. If PE code/data sections are merged, the result is unpredictable.\r
1610 #\r
1611 # UEFI 2.6 specification does not recommend to use this BIT0 attribute.\r
1612 #\r
1613 # @Prompt Publish UEFI PropertiesTable.\r
1614 gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e\r
1615\r
1616 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
1617 # @Prompt Default OEM ID for ACPI table creation.\r
1618 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
1619\r
1620 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
1621 # According to ACPI specification, this field is particularly useful when\r
1622 # defining a definition block to distinguish definition block functions.\r
1623 # The OEM assigns each dissimilar table a new OEM Table ID.\r
1624 # This PCD is ignored for definition block.\r
1625 # @Prompt Default OEM Table ID for ACPI table creation.\r
1626 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
1627\r
1628 ## Default OEM Revision for ACPI table creation.\r
1629 # According to ACPI specification, for LoadTable() opcode, the OS can also\r
1630 # check the OEM Table ID and Revision ID against a database for a newer\r
1631 # revision Definition Block of the same OEM Table ID and load it instead.\r
1632 # This PCD is ignored for definition block.\r
1633 # @Prompt Default OEM Revision for ACPI table creation.\r
1634 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
1635\r
1636 ## Default Creator ID for ACPI table creation.\r
1637 # According to ACPI specification, for tables containing Definition Blocks,\r
1638 # this is the ID for the ASL Compiler.\r
1639 # This PCD is ignored for definition block.\r
1640 # @Prompt Default Creator ID for ACPI table creation.\r
1641 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
1642\r
1643 ## Default Creator Revision for ACPI table creation.\r
1644 # According to ACPI specification, for tables containing Definition Blocks,\r
1645 # this is the revision for the ASL Compiler.\r
1646 # This PCD is ignored for definition block.\r
1647 # @Prompt Default Creator Revision for ACPI table creation.\r
1648 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
1649\r
1650 ## Indicates if to set NX for stack.<BR><BR>\r
1651 # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
1652 # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
1653 # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
1654 # TRUE - to set NX for stack.<BR>\r
1655 # FALSE - Not to set NX for stack.<BR>\r
1656 # @Prompt Set NX for stack.\r
1657 gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
1658\r
1659 ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.\r
1660 # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC\r
1661 # host controllers, their mmio base addresses are calculated one by one from this base address.\r
1662 # @Prompt Mmio base address of pci-based SD/MMC host controller.\r
1663 gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043\r
1664\r
1665 ## Indicates if ACPI S3 will be enabled.<BR><BR>\r
1666 # TRUE - ACPI S3 will be enabled.<BR>\r
1667 # FALSE - ACPI S3 will be disabled.<BR>\r
1668 # @Prompt ACPI S3 Enable.\r
1669 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000\r
1670\r
1671 ## Specify memory size for boot script executor stack usage in S3 phase.\r
1672 # The default size 32K. When changing the value make sure the memory size is large enough \r
1673 # to meet boot script executor requirement in the S3 phase.\r
1674 # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size\r
1675 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000\r
1676\r
1677 ## Indicates if to use the optimized timing for best PS2 detection performance.\r
1678 # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>\r
1679 # TRUE - Use the optimized timing for best PS2 detection performance.<BR>\r
1680 # FALSE - Use the normal timing to detect PS2.<BR>\r
1681 # @Prompt Enable fast PS2 detection\r
1682 gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044\r
1683\r
1684 ## This is recover file name in PEI phase.\r
1685 # The file must be in the root directory.\r
1686 # The file name must be the 8.3 format.\r
1687 # The PCD data must be in UNICODE format.\r
1688 # @Prompt Recover file name in PEI phase\r
1689 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045\r
1690\r
1691 ## This PCD hold a list GUIDs for the ImageTypeId to indicate the\r
1692 # FMP capsule is a system FMP.\r
1693 # @Prompt A list of system FMP ImageTypeId GUIDs\r
1694 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046\r
1695\r
1696[PcdsPatchableInModule]\r
1697 ## Specify memory size with page number for PEI code when\r
1698 # Loading Module at Fixed Address feature is enabled.\r
1699 # The value will be set by the build tool.\r
1700 # @Prompt LMFA PEI code page number.\r
1701 # @ValidList 0x80000001 | 0\r
1702 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
1703\r
1704 ## Specify memory size with page number for DXE boot time code when\r
1705 # Loading Module at Fixed Address feature is enabled.\r
1706 # The value will be set by the build tool.\r
1707 # @Prompt LMFA DXE boot code page number.\r
1708 # @ValidList 0x80000001 | 0\r
1709 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
1710\r
1711 ## Specify memory size with page number for DXE runtime code when\r
1712 # Loading Module at Fixed Address feature is enabled.\r
1713 # The value will be set by the build tool.\r
1714 # @Prompt LMFA DXE runtime code page number.\r
1715 # @ValidList 0x80000001 | 0\r
1716 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
1717\r
1718 ## Specify memory size with page number for SMM code when\r
1719 # Loading Module at Fixed Address feature is enabled.\r
1720 # The value will be set by the build tool.\r
1721 # @Prompt LMFA SMM code page number.\r
1722 # @ValidList 0x80000001 | 0\r
1723 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
1724\r
1725[PcdsDynamic, PcdsDynamicEx]\r
1726 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
1727 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1728 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1729 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
1730 # @Prompt S3 Boot Script Table Private Data pointer.\r
1731 # @ValidList 0x80000001 | 0x0\r
1732 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
1733\r
1734 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
1735 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
1736 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
1737 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
1738 # @Prompt S3 Boot Script Table Private Smm Data pointer.\r
1739 # @ValidList 0x80000001 | 0x0\r
1740 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
1741\r
1742 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1\r
1743 # Virtual to Physical mapping according to the processor physical address bits.\r
1744 # @Prompt Identify Mapping Page Table pointer.\r
1745 # @ValidList 0x80000001 | 0x0\r
1746 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
1747\r
1748 ## This dynamic PCD holds the information if there is any test key used by the platform.\r
1749 # @Prompt If there is any test key used by the platform.\r
1750 gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003\r
1751\r
1752[UserExtensions.TianoCore."ExtraFiles"]\r
1753 MdeModulePkgExtra.uni\r
EFI Development Kit II mirror for PVE